检索结果-南通市图书馆

Solid-state alloying of Al-Mg alloys by accumulative roll-bonding:Microstructure and properties

Journal of Materials Science & Technology 2022年第30期125卷 238-251页

作者： X.M.Mei q.S.Mei J.y.li C.l.li l.Wan F.Chen Z.H.Chen T.Xu y.C.Wang y.y.Tan School of Power and Mechanical Engineering Wuhan UniversityWuhan 430072China Key laboratory of Hydraulic Machinery Transients(Wuhan University) Ministry of EducationWuhan 430072China School of Mechanical Engineering Wuhan Polytechnic UniversityWuhan 430023China

In this study,a novel solid-state alloying approach was adopted to fabricate Al-Mg alloys with high Mg contents(C_(Mg)) by accumulative roll-bonding(ARB)of Al and Mg elemental materials to ultrahigh *** results showed that the degree of alloying increased with the increase of ARB cycles and a supersaturatedα-Al solid solution accompanied with nanoprecipitates was formed in the Al-Mg alloys by ARB to 70 *** as-prepared Al-Mg alloys exhibited enhanced mechanical properties,with a maximum tensile strength of∼615 MPa and a tensile elongation of∼10%at C_(Mg)=13 wt.%.The high strength can be attributed to different mechanisms,namely solid solution strengthening,grain boundary strengthening,dislocation strengthening,and precipitation *** Al-Mg alloys showed increased work hardening with increasing C_(Mg),due to the enhanced formation of ***,no obvious drop in the intergranular corrosion(IGC)resistance was found in the Al-Mg alloys with C_(Mg) up to 13 wt.%.Moreover,sensitization treatment was found to induce little decrease in the IGC resistance of the Al-Mg alloys with C_(Mg)≤13 wt.%.We found that the excellent IGC resistance was due to the suppression of grain boundary precipitation by the preferred formation of precipitates within the grains that were induced by *** study indicated the novelty of the present solid-state alloying approach to achieving a superior combination of high mechanical properties and IGC resistance in Al-Mg alloys.

关键词： Solid-state alloying Al-Mg alloys Mechanical properties IGC resistance ARB

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

MICROSTRUCTURE AND MECHANICAl PROPERTIES OF NOVEl 718 SUPERAllOy

引用

Acta Metallurgica Sinica(English letters) 2006年第6期19卷 418-424页

作者： J.H.Du X.D.lü J.l.qu q.Deng J.y.Zhuang Z.y.Zhong Department of Superalloy Central Iron and Steel Research InstituteBeijing 100081China

Recently,a novel 718 superalloy with remarkable structural stability at 680℃has been designed and fabricated by CISRI(Central Iron and Steel Research Institute)*** identification of novel 718 alloy under the above-mentioned heat-treatment condition was performed using optical microscopy(OM),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).Results show that the novel 718 alloy has outstanding structural stability at 680℃.The novel 718alloy possess excellent structural stability and good mechanical properties,which is attributed to y-phase strengthening and also to the specific sandwich structure of theγ′+γ'strengthening phase.

关键词： novel 718 superalloy microstructure mechanical property stress rupture creep

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

STRUCTURE AND BINDING STATE OF CN_x FIlMS SyNTHESIZED By FACING TARGETS SPUTTERING

引用

Acta Metallurgica Sinica(English letters) 1999年第5期12卷 752-756页

作者： Tang, D.q. Wang, y. Jiang, E.y. Zhao, C. Sun, F.l. Tianjin Univ Tianjin China

CN x films were made by a facing targets sputtering ( FTS) systemon the  Si(100) substrate under different  N 2 partial pressure.  XRD, XPS, FTIR and Raman Spectroscopy( RS) were measured to investigate the structure and the binding state of the film. The films are amorphous and the  N/C increases with the  N 2 partial pressure increasing and reaches 0 46 when the  N 2 pressure is 100%. The N incorporated  C forms N sp 2C and N sp 3C mainly and there is a small amount of  C≡N.

关键词： Amorphous films Hard disk storage Hardness Nitrides Silicon wafers Sputtering Synthesis (chemical)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

SUPERCONVERGENCE OF DISCONTINUOUS GAlERKIN METHOD FOR NONSTATIONARy HyPERBOlIC EqUATION

引用

Journal of Computational Mathematics 2002年第4期20卷 429-436页

作者： Chen, y lin, JF lin, q Chinese Acad Sci Acad Math & Syst Sci ICMSEC LSEC Beijing 100080 Peoples R China

For the first order nonstationary hyperbolic equation taking the piecewise linear discontinuous Galerkin solver, we prove that under the uniform rectangular partition, such a discontinuous solver, after postprossesing, can have two and half approximative order which is half order higher than the optimal estimate by lesaint and Raviart under the rectangular partition.

关键词： discontinuous Galerkin method hyperbolic equation nonstationary superconvergence

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure and mechanical properties of Mg-to-Al dissimilar welded joints with an Ag interlayer using ultrasonic spot welding

引用

Journal of Magnesium and Alloys 2020年第2期8卷 552-563页

作者： H.Peng D.l.Chen X.F.Bai P.q.Wang D.y.li X.q.Jiang College of Engineering and Technology Southwest UniversityTiansheng Road 2Beibei DistrictChongqing 400715China Department of Mechanical and Industrial Engineering Ryerson University350 Victoria StreetTorontoOntario M5B 2K3Canada School of Materials and Energy Southwest UniversityTiansheng Road 2Beibei DistrictChongqing 400715China Department of Chemical and Materials Engineering University of AlbertaEdmontonAlberta T6G 1H9Canada

lightweight ZEK100-0 Mg alloy and A16022-T43 Al alloy with an Ag interlayer were joined via ultrasonic spot welding(USW),focusing on the microstructural change and tensile lap shear strength of the welded joints in relation to welding ***/Al interface was superseded by Mg/Ag and Al/Ag interfaces,and unfavorable Mg门A-intermetallic compound was *** foil was observed to be intact in the nugget center,while it was broken or dissolved at the nugget edge at high welding energy *** diffusion layer at the Mg/Ag interface consisted of two distinctive sub-layers:Mg3Ag intermetallic compound adjoining Ag foil,and Mg3Ag-l-Mg eutectic structure adjacent to *** a thin diffusion layer consisting mainly of Ag3Al occurred al lhe Al/Ag *** tensile lap shear strength first increased,reached its peak value,and then decreased with increasing welding *** shear strength achieved in the present study was〜31%higher than that of the joint without *** failure occurred at all energy levels,with Ag foil particles or fragments being stuck on both Mg and Al sides due to its intense interaction with Mg and Al via accelerated diffusion during *** results obtained pave the way for the challenging dissimilar welding between Mg and Al alloys.

关键词： Magnesium alloy Aluminum alloy Ultrasonic spot welding Ag interlayer Microstructure Tensile lap shear strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Analysis of the redox environment and genesis of surface sediment in the northeast Indian Ocean at the Ninety-East Ridge

引用

Journal of Oceanology and limnology 2025年第1期43卷 57-72页

作者： Zhourong CAI qianru HUANG Zhengxin yIN Xin SUI Sibo lÜ Meng TANG Juan PENG School of Marine Sciences Sun Yat-sen UniversityZhuhai 519082China Guangdong Provincial Key laboratory of Marine Resources and Coastal Engineering Zhuhai 519082China South China Sea Marine Survey Center Ministry of Natural ResourcesGuangzhou 510275China Key laboratory of Marine Environmental Survey Technology and Application Ministry of Natural ResourcesGuangzhou 510275China

The Ninety-East Ridge(NER)is located in the semioceanic to oceanic region of the southern Bengal Fan in the Northeast Indian *** sedimentary environment,ocean currents,and scientific issues related to climate change have always been the focus of *** well understand the sedimentary environment of the sea area,we studied the modern sedimentary environment of the NER by analyzing the redox-sensitive trace elements(RSEs)and biomarkers in the surface sediments of the northern region and both sides of the NER and the mechanism of their *** ratios of Mo/U(average 2.22),(Cu+Mo)/Zn(average 1.51),and the results ofδCeles,all indicate the reduction of the sedimentary *** addition,the ratio of pristane(Pr)to phytane(Ph),C30diahopane to C30 hopane,and diasterane to sterane were low in all samples,on average of 1.03,0.9,and 0.33,*** analysis of RSE and biomarker data revealed that the sedimentary environment on seabed of the NER is generally a rare low-oxygen reduction *** the analysis of sediment characteristics,material sources,and ocean currents,we preliminarily constructed a genetic model for the low-oxygen reducing environment of surface sediments in the *** believe that the low-oxygen reduction environment of surface sediment in the NER could be influenced by multiple factors,such as terrestrial input of materials,productivity at sea surface,and sediment particle size.

关键词： Ninety-East Ridge(NER) surface sediment sedimentary environment redox-sensitive trace elements(RSEs) biomarker

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Interest of D-dimer level,severity of COVID-19 and cost of management in Gabon

引用

World Journal of Critical Care Medicine 2025年第1期14卷 91-99页

作者： Berthe A Iroungou Arnaud Nze O Helga M Kandet y Neil-Michel longo-Pendy Nina D Mezogho-Obame Annicet-Clotaire Dikoumba Guignali l Mangouka UnitéMixte de Recherche Centre International de Recherches Médicales de Franceville et le Service de SantéMilitaireLibreville 20404EstuaireGabon AP-HP Health Economics Research UnitHtel Dieu HospitalParis 75004Ilede-FranceFrance laboratory Hôpital D'Instruction des Armées D'AkandaLibreville 20404EstuaireGabo Unitéde Recherche enÉcologie de la Santé Centre Interdisciplinaire de Recherches Médicales de FrancevilleFranceville 769Gabon laboratory Hôpital D'Instruction des Armées Omar Bongo OndimbaLibreville 20404EstuaireGabon Department of Medecine Polyvalente Hôpital D'Instruction des Armées Omar Bongo OndimbaLibreville 20404EstuaireGabon

BACKGROUND Coronavirus disease 2019(COVID-19)is strongly associated with an increased risk of thrombotic events,including severe outcomes such as pulmonary *** D-dimer levels are a critical biomarker for assessing this *** Gabon,early implementation of anticoagulation therapy and D-dimer testing has been crucial in managing *** study hypothesizes that elevated Ddimer levels are linked to increased COVID-19 *** To determine the impact of D-dimer levels on COVID-19 severity and their role in guiding clinical *** This retrospective study analyzed COVID-19 patients admitted to two hospitals in Gabon between March 2020 and December *** study included patients with confirmed COVID-19 diagnoses and available D-dimer measurements at *** on demographics,clinical outcomes,D-dimer levels,and healthcare costs were ***-19 severity was classified as non-severe(outpatients)or severe(inpatients).A multivariable logistic regression model was used to assess the relationship between D-dimer levels and disease severity,with adjusted odds ratios(OR)and 95%*** A total of 3004 patients were included,with a mean age of 50.17 years,and the majority were female(53.43%).Elevated D-dimer levels were found in 65.81%of patients,and 57.21%of these experienced severe *** analysis showed that patients with elevated D-dimer levels had 3.33 times higher odds of severe COVID-19(OR=3.33,95%CI:2.84-3.92,Pltivariable analysis,adjusted for age,sex,and year of *** financial analysis revealed a substantial burden,particularly for uninsured *** D-dimer predicts COVID-19 severity and guides treatment,but the high cost of anticoagulant therapy highlights the need for policies ensuring affordable access in resource-limited settings like Gabon.

关键词： D-dimers COVID-19 Management Disease severity Healthcare costs Gabon

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CAlCUlATION OF THE DAMPING OF THE Zn-27Al AllOy BASED ON THE MICRO INTERFACE SlIDING MODEl

引用

Acta Metallurgica Sinica(English letters) 2006年第3期19卷 228-234页

作者： y.Z. Zhao q. Gao y.C. liu School of Civil Engineering Southwest Jiaotong University Chengdu 610031 China Department of Applied Mechanics and Engineering Southwest Jiaotong University Chengdu 610031 China

The microstructures of the Zn-27Al alloy after modification, solid-solution treatment, and natural aging were studied. It was clarified why the damping properties of Zn-27Al alloys, after treatment, had advanced most on the basis of analyzing the microstructures. Approximate expressions have been educed, which can be used to quantificationally work out the damping of the Zn-27Al alloy on the basis of the micro interface sliding model. By comparing the testing damping properties of the foundry Zn-27Al alloys and the Zn-27Al alloys after modification, solid solution, and natural aging, it was shown that the expressions were rational.

关键词： modification solid solution and aging damping micromechanism micro interface sliding model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparison of microstructure and mechanical behavior of Ti-35Nb manufactured by laser powder bed fusion from elemental powder mixture and prealloyed powder

引用

Journal of Materials Science & Technology 2022年第10期105卷 1-16页

作者： J.C.Wang y.J.liu S.X.liang y.S.Zhang l.q.Wang T.B.Sercombe l.C.Zhang School of Engineering Edith Cowan University270 Joondalup DriveJoondalupPerthWA 6027Australia School of Engineering M050The University of Western Australia35 Stirling HighwayCrawleyPerthWA 6009Australia Northwest Institute for Nonferrous Metal Research Xi’an 710016China State Key laboratory of Metal Matrix Composites School of Material Science and EngineeringShanghai Jiao Tong UniversityShanghai 200240China

Although different types of powder feedstock are used for additive manufacturing via laser powder bed fusion(l-PBF),limited work has attempted to directly compare the microstructure and mechanical behavior of components manufactured from those powder *** work investigated the microstructure,phase composition,melt pool morphology,and mechanical properties of a prealloyed Ti-35Nb alloy manufactured using l-PBF and compared these to their counterparts produced from elemental powder *** samples manufactured from the powder mixture are composed of randomly distributed undissolved Nb in theα/βmatrix,resulting from the unstable melt pool during the melting of the powder *** contrast,parts produced from prealloyed powder display a homogeneous microstructure withβandαphases,owing to the full melting of prealloyed powder,therefore,a more stable melt pool to achieve a homogeneous *** Ti-35Nb manufactured from prealloyed powder exhibits large tensile ductility(about 10 times that of the counterparts using mixed powder),attributed to the high homogeneity in microstructure and chemical composition,strong interface bonding,relatively low oxygen content,and the existence of a large amount ofβ*** work sheds insights into understanding the effect of powder feedstock on the melt pool stability therefore the microstructure and mechanical behavior of the resultant parts.

关键词： Titanium-niobium Powder bed fusion Additive manufacturing Melt pool stability Microstructure Mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

First-principles Investigation of Bi Segregation at the Solder Interface of Cu/Cu_3Sn(010)

引用

Journal of Materials Science & Technology 2010年第12期26卷 1057-1062页

作者： X.y. Pang Z.q. liu S.q. Wang J.K. Shang Shenyang National laboratory for Materials Science Institute of Metal Research Chinese Academy of Sciences Shenyang 110016 China Department of Materials Science and Engineering University of Illinois at Urbana-Champaign IL 61801 USA

Density functional theory was employed to investigate the bismuth segregation at Cu/Cu3Sn（010） interface. Five initial constructions were introduced by adopting the adhesion energy criterion. Among them, the so-called ＂between-Cu＂ construction in which the interface Cu atoms of Cu slab locate along Cu-Cu bond direction in Cu3Sn slab was found to be the most energy-favored at an adhesion energy of 1.96 J/m^2. Based on this construction, five possible segregation sites were examined, and the most likely segregation site was determined with adhesion energy as low as 1.06 J/m^2, which was almost half of the initial one. Comparing with other sitest adhesion energies, it was concluded that size effect took a large part in embrittlement. The analyses of atomic structure and electronic density revealed that the slabs shifted away from interfaces due to bismuth segregation, and the atoms around Bi atom were Dressed away. This calculated work agreed aualitativelv with reported experimental results.

关键词： First-principles calculation Segregation Bismuth Interface SnBi solder

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：