检索结果-南通市图书馆

Depleted uranium oxide supported nickel catalyst for autothermal CO_(2)methanation in non-adiabatic reactor under induction heating

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2023年第10期85卷 310-323,I0010页

作者： Lai Truong-Phuoc Jean-Mario Nhut Loïc Vidal cuong Duong-Viet Sécou Sall Corinne Petit Christophe Sutter Mehdi Arab Alex Jourdan cuong pham-huu Institute of Chemistry and Processes for Energy Environment and Health(ICPEES)ECPMUMR 7515 CNRS-University of Strasbourg25 rue Becquerel67087 Strasbourg Cedex 02France BlackLeaf SAS 210 rue Geiler de Kaysersberg67400 IllkirchFrance Institute of Materials Science of Mulhouse IS2MUMR 7361Universitéde Haute-AlsaceCNRS15rue Jean Starcky-BP 248868057 MulhouseFrance ORANO Tricastin Direction de La Recherche&DéveloppementSite du TRICASTIN BP 1626701 Pierrelatte CedexFrance

Undoped nickel-based catalysts supported on depleted uranium oxide allow one to carry out CO_(2)methanation process under extremely low reaction temperature under atmospheric pressure and powered by a contactless induction *** adjusting the reaction conditions,the catalyst is able to perform CO_(2)methanation reaction under autothermal process operated inside a non-adiabatic reactor,without any external energy *** autothermal process is possible thanks to the high apparent density of the UO_x which allows one to confine the reaction heat in a small catalyst volume in order to confine the exothermicity of the reaction inside the catalyst and to operate the reaction at equilibrium heat in-heat *** autothermal operation mode allows one to significantly reduce the complexity of the process compared to that operated using adiabatic reactor,where complete insulation is required to prevent heat disequilibrium,in order to reduce as much as possible,the heat exchange with the external *** catalyst displays an extremely high stability as a function of time on stream as no apparent *** is expected that such new catalyst with unprecedented catalytic performance could open new era in the field of heterogeneous catalysis where traditional supports show their limitations to operate catalytic processes under severe reaction conditions.

关键词： CO_(2)methanation Auto-methanation Induction heating Depleted uranium oxide Electrification process Operando DRIFTS

High Temperature Stability of Platinum Nanoparticles on Few-Layer Graphene Investigated by In Situ High Resolution Transmission Electron Microscopy

在线全文

学校读者我要写书评

暂无评论

Nano Research 2011年第5期4卷 511-521页

作者： Izabela Janowska Maria-Simona Moldovan Ovidiu Ersen Herve Bulou Kambiz Chizari Marc J. Ledoux cuong pham-huu Laboratoire des MatEriaux Surfaces et ProcEdEs pour la Catalyse （LMSPC UMR 7515 CNRS） 25 rue Becquerel F-67087 Strasbourg Cedex 02 France Institut de Physique et Chimie des Materiaux de Strasbourg （IPCMS UMR 7504 CNRS） 23 rue du Loess F-67037 Strasbourg Cedex 08 France

Heterogeneous catalytic reactions involve the use of highly dispersed active phases such as metal, metal oxide, or metal sulphide nanoparticIes on thermally stable supports. Fluctuations of the reaction temperature during the reactions can induce sintering of the particles. The stability of such small particles represents a crucial parameter in the development of new families of catalysts with high activity in many fields. Here we report the stability of platinum nanoparticles （2-3 nm） on a few-layer graphene （FLG） surface as studied by in situ high temperature transmission electron microscopy.

关键词： Graphene platinium nanoparticles diffusion catalysis TEM annealing

An isogeometric approach to static and transient analysis of fluid-infiltrated porous metal foam piezoelectric nanoplates with flexoelectric effects and variable nonlocal parameters

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第3期18卷 461-489页

作者： Quoc-Hoa pham Van Ke Tran Phu-cuong Nguyen Faculty of Engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh City 700000Vietnam Faculty of Mechanical Engineering Le Quy Don Technical UniversityHanoi 100000Vietnam Advanced Structural Engineering Laboratory Department of Structural EngineeringFaculty of Civil EngineeringHo Chi Minh City Open UniversityHo Chi Minh City 700000Vietnam

In this work,a novel refined higher-order shear deformation plate theory is integrated with nonlocal elasticity theory for analyzing the free vibration,bending,and transient behaviors of fluid-infiltrated porous metal foam piezoelectric nanoplates resting on Pasternak elastic foundation with flexoelectric *** analysis(IGA)and the Navier solution are applied to the *** innovation in the present study is that the influence of the in-plane variation of the nonlocal parameter on the free and forced vibration of the piezoelectric nanoplates is investigated for the first *** nonlocal parameter and material characteristics are assumed to be material-dependent and vary gradually over the thickness of *** on Hamilton’s principle,equations of motion are built,then the IGA approach combined with the Navier solution is used to analyze the static and dynamic response of the ***,we investigate the effects of the porosity coefficients,flexoelectric parameters,elastic stiffness,thickness,and variation of the nonlocal parameters on the mechanical behaviors of the rectangular and elliptical piezoelectric nanoplates.

关键词： isogeometric analysis fluid-infiltrated porous piezoelectric nanoplates static and transient analysis flexoelectric effect variable nonlocal parameters

Exact solution for thermal vibration of multi-directional functionally graded porous plates submerged in fluid medium

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第5期35卷 77-99页

作者： Quoc-Hoa pham Van Ke Tran Phu-cuong Nguyen Faculty of Engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh CityViet Nam Faculty of Mechanical Engineering Le Quy Don Technical UniversityHanoiViet Nam Advanced Structural Engineering Laboratory Department of Structural EngineeringFaculty of Civil EngineeringHo Chi Minh City Open UniversityHo Chi Minh CityViet Nam

An analytical method for analyzing the thermal vibration of multi-directional functionally graded porous rectangular plates in fluid media with novel porosity patterns is developed in this *** properties of MFG porous plates change according to the length,width,and thickness directions for various materials and the porosity distribution which can be widely applied in many fields of engineering and defence ***,new porous rules that depend on spatial coordinates and grading indexes are proposed in the present *** Hamilton's principle and the refined higher-order shear deformation plate theory,the governing equation of motion of an MFG porous rectangular plate in a fluid medium(the fluid-plate system)is *** fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to compute the extra *** GalerkinVlasov solution is used to solve and give natural frequencies of MFG porous plates with various boundary conditions in a fluid *** validity and reliability of the suggested method are confirmed by comparing numerical results of the present work with those from available works in the *** effects of different parameters on the thermal vibration response of MFG porous rectangular plates are studied in *** findings demonstrate that the behavior of the structure within a liquid medium differs significantly from that within a vacuum ***,they offer appropriate operational approaches for the structure when employed in various mediums.

关键词： Plate-fluid contact Galerkin Vlasov's method Multi-directional functionally graded plate Novel porosity Thermal vibration Refined higher-order shear deformation theory

Carbon nanotubes decorated α-Al_2O_3 containing cobalt nanoparticles for Fischer-Tropsch reaction

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2013年第2期22卷 279-289页

作者： Yuefeng Liu Thierry Dintzer Ovidiu Ersen cuong pham-huu Laboratoire des Matriaux Surfaces et Procds pour la Catalyse (LMSPC) UMR 7515 CNRS-Universit de Strasbourg (UdS) 25 rue Becquerel 67087 Strasbourg Cedex 08 France Institut de Physique et Chimie des Matriaux de Strasbourg (IPCMS) UMR 7504 CNRS-Universit de Strasbourg (UdS) 23 rue du Loess 67037 Strasbourg Cedex 02 France

A new hierarchical composite consisted of multi-walled carbon nanotubes （CNTs） layer anchored on macroscopic a-A1203 host matrix was synthesized and used as support for Fischer-Tropsch synthesis （FTS）. The composite constituted by a thin shell of a homogeneous, highly entan-gled and structure-opened carbon nanotubes network and it exhibited a relatively high and fully accessible specific surface area of 76 m2.g-1, compared with that of 5 m2.g-1 of the original a-A1203support. The metal-support interaction between carbon nanotubes surface and cobalt precursor and high effective surface area led to a relatively high dispersion of cobalt nanoparticles. This hierarchically supported cobalt catalyst exhibited a high FTS activity along with an extremely high selectivity towards liquid hydrocarbons compared with the cobalt-based catalyst supported on pristine a-A1203 or on CNTs carriers. This improvement can attribute to the high accessibility of composite surface area com- paring with the macroscopic host structure alone or to the bulk CNTs where the nanoscopic dimension induced a dense packing with low mass transfer which favoured the problem of reactants competitive diffusion towards the cobalt active site. In addition, intrinsic thermal conductivity of decorated CNTs could help the heat dissipating throughout the catalyst body, thus avoiding the formation of local hot spots which appeared in high CO conversion under pure syngas feed in FTS reaction. Cobalt supported on CNTs decorated a-A1203 catalyst also exhibited satisfied high stability during more than 200 h on stream under relatively severe conditions compared with other catalysts reported in the literature. Finally, the macroscopic shape of such composite easily rendered its usage as catalyst support in a fixed-bed configuration without facing problems of transport and pressure drop as encountered with the bulk CNTs.

关键词： carbon nanotubes Fischer-Tropsch synthesis a-A1203 hierarchical support cobalt nanoparticles

Nonlinear dynamic analysis of functionally graded carbon nanotube-reinforced composite plates using MISQ20 element

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2023年第7期17卷 1072-1085页

作者： Quoc-Hoa pham Trung Thanh TRAN Phu-cuong NGUYEN Advanced Structural Engineering Laboratory Department of Structural EngineeringFaculty of Civil EngineeringHo Chi Minh City Open UniversityHo Chi Minh City 700000Vietnam Faculty of Mechanical Engineering Le Quy Don Technical UniversityHanoi 100000Vietnam

The main objective of this study is to further extend the mixed integration smoothed quadrilateral element with 20 unknowns of displacement(MISQ20)to investigate the nonlinear dynamic responses of functionally graded carbon nanotube-reinforced composite(FG-CNTRC)plates with four types of carbon nanotube *** smooth finite element method is used to enhance the accuracy of the Q4 element and avoid shear locking without using any shear correction *** method yields accurate results even if the element exhibits a concave quadrilateral shape and reduces the error when the element meshing is ***,the element stiffness matrix is established by integrating the boundary of the smoothing *** motion equation of the FG-CNTRC plates is solved by adapting the Newmark method combined with the Newton–Raphson ***,the calculation program is coded in the MATLAB software and verified by comparing it with other published ***,the effects of the input parameters on the nonlinear vibration of the plates are investigated.

关键词： carbon nanotube MISQ20 FG-CNTRC plate nonlinear vibration nonlinear dynamic analysis SFEM

氮掺杂碳纳米管包覆碳化硅作为不含金属的催化剂(英文)

在线全文

学校读者我要写书评

暂无评论

催化学报 2014年第6期35卷 906-913页

作者： cuong Duong-Viet Housseinou Ba Yuefeng Liu Lai Truong-Phuoc Jean-Mario Nhut cuong pham-huu Institute of Chemistry and Processes for Energy Environment and Health (ICPEES) ECPM UMR 7515 du CNRS-University of Strasbourg 25 rue Becquerel 67087 Strasbourg Cedex 02 France Hanoi University of Mining and Geology Dong Ngac Tu Liem Hanoi Viet Nam

A hierarchical metal-free catalyst consisting of nitrogen-doped carbon nanotubes decorated onto a silicon carbide (N-CNTs/SiC) macroscopic host structure was prepared. The influence of N-CNTs incorporation on the physical properties of the support was evaluated using different characterization techniques. The catalyst was tested as a metal-free catalyst in the selective oxidation of H2S and steam-free dehydrogenation of ethylbenzene. The N-CNTs/SiC catalyst exhibited extremely good desulfurization performance compared to a Fe2O3/SiC catalyst under less conducive reaction conditions such as low temperature, high space velocity, and a low O2-to-H2S molar ratio. For the dehy-drogenation of ethylbenzene, a higher dehydrogenation activity was obtained with the N-CNTs/SiC catalyst compared to a commercial K-Fe/Al2O3 catalyst. The N-CNTs/SiC catalyst also displayed good stability as a function of time on stream for both reactions, which was attributed to the strong anchoring of the nitrogen dopant in the carbon matrix. The extrudate shape of the SiC support allowed the direct macroscopic shaping of the catalyst for use in a conventional fixed-bed reactor without the problems of catalyst handling, transportation, and pressure drop across the catalyst bed that are encountered with nanoscopic carbon-based catalysts.

关键词：催化剂组成碳纳米管碳化硅含金属氮掺杂固定床反应器复合材料氧化铝催化剂

A hybrid machine learning model to estimate self-compacting concrete compressive strength

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2022年第8期16卷 990-1002页

作者： Hai-Bang LY Thuy-Anh NGUYEN Binh Thai pham May huu NGUYEN Civil Engineering Department University of Transport TechnologyHanoi 100000Vietnam Civil and Environmental Engineering Program Graduate School of Advanced Science and EngineeringHiroshima UniversityHiroshima 739-8527Japan

This study examined the feasibility of using the grey wolf optimizer(GWO)and artificial neural network(ANN)to predict the compressive strength(CS)of self-compacting concrete(SCC).The ANN-GWO model was created using 115 samples from different sources,taking into account nine key SCC *** validation of the proposed model was evaluated via six indices,including correlation coefficient(R),mean squared error,mean absolute error(MAE),IA,Slope,and mean absolute percentage *** addition,the importance of the parameters affecting the CS of SCC was investigated utilizing partial dependence *** results proved that the proposed ANN-GWO algorithm is a reliable predictor for SCC’s *** that,an examination of the parameters impacting the CS of SCC was provided.

关键词： artificial neural network grey wolf optimize algorithm compressive strength self-compacting concrete

Isogeometric analysis for free vibration of bidirectional functionally graded plates in the fluid medium

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2022年第8期18卷 1311-1329页

作者： Quoc-Hoa pham Phu-cuong Nguyen Van Ke Tran Trung Nguyen-Thoi Faculty of Civil Engineering Ho Chi Minh City Open UniversityHo Chi Minh CityViet Nam Faculty of Mechanical Engineering Le Quy Don Technical UniversityHanoiViet Nam Division of Computational Mathematics and Engineering Institute for Computational ScienceTon Duc Thang UniversityHo Chi Minh CityViet Nam Faculty of Civil Engineering Ton Duc Thang UniversityHo Chi Minh CityViet Nam

This paper for first time proposes an isogeometric analysis (IGA) for free vibration response of bi-directional functionally graded (BDFG) rectangular plates in the fluid medium. Material properties of the BDFG plate change in both the thickness and length directions via power-law distributions and Mori-Tanaka model. The governing equation of motion of BDFG plate in the fluid-plate system is formulated basing on Hamilton's principle and the refined quasi three-dimensional (3D) plate theory with improved function f(z). The fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to determine the added mass. The discrete system of equations is derived from the Galerkin weak form and numerically analyzed by IGA. The accuracy and reliability of the proposed solutions are verified by comparing the obtained results with those published in the literature. Moreover, the effects of the various parameters such as the interaction boundary condition, geometric parameter, submerged depth of plate, fluid density, fluid level, and the material volume control coefficients on the free vibration behavior of BDFG plate in the fluid medium are investigated in detail. Some major findings regarding the numerical results are withdrawn in conclusions.

关键词： Contact plate-fluid Refined quasi 3D plate theory Mori-Tanaka model Isogeometric analysis Bidirectional functionally graded plate