检索结果-南通市图书馆

Acta Metallurgica sinica(English Letters) 2020年第12期33卷 1666-1680页

作者： U.K.Tarai p.s.robi sukhomay pal Department of Mechanical Engineering IIT GuwahatiGuwahati 781039India

A new Ni–Cr–si–B–Fe fi ller material is prepared for transient liquid-phase(TLp)bonding of Inconel 718 superalloy by mechanical alloying *** melting temperature range of the fi ller material and its activation energy of melting are determined by diff erential scanning calorimetry *** activation energy and melting temperature of the alloy powder decrease with increasing milling *** 718 alloy was joined via TLp by using the newly developed fi ller *** eff ect of TLp bonding temperature and time on microstructural evolution and mechanical properties of the joint was *** distinct microstructural regions were observed in the bonding area:isothermal solidifi cation zone consisting of a single-phase solid solution,diff usion aff ected zone consisting of extensive diff usion-induced precipitates of metallic boride,and unaff ected base *** ultimate shear strength and microhardness of the TLp-bonded joint increase with bonding time and temperature.

关键词： Transient liquid-phase(TLp)bonding Kissinger plot Mechanical alloying Inconel 718

Effects of dietary supplementation with tropical microfungi Mucor circinelloides and Trichoderma harzianum powder on growth performance,bacterial communities,and the biomass nutritional profile of white shrimp grow-out culture(Litopenaeus vannamei)

在线全文

学校读者我要写书评

暂无评论

Aquaculture and Fisheries 2024年第2期9卷 245-255页

作者： robi Binur salsabila Mutiara Kanti Muharam Tia Fahara Magdalena Lenny situmorang I Nyoman pugeg Aryantha Gede suantika Department of Biology Faculty of Mathematics and Natural SciencesUniversitas PapuaJl.Gunung Salju AmbanManokwari98314Indonesia Microbial Biotechnology Research Group School of Life Sciences and TechnologyInstitut Teknologi BandungJl.Ganesha 10Bandung40132Indonesia Biosciences and Biotechnology Research Center Institut Teknologi BandungJl.Ganesha 10Bandung40132Indonesia

Microfungi have been explored further as supplement constituents in shrimp culture due to their rich protein,lipid,essential amino acids,fatty acids,and various bioactive *** researchers have evaluated the effects of two microfungi powders(Mucor circinelloides and Trichoderma harzianum)as feed supplements on growth performance,bacterial communities,and the biomass nutritional profile of white shrimp(Litopenaeus vannamei).The results showed that commercial/artificial feed(Feng-Li)with supplementation microfungi powder had a different effect on white shrimp growth performance than control after 62 days of the grow-out *** with 1.5%*** powder(M-2)could improve the growth performance of white shrimp,especially the survival rate(81.33%),final body weight(5.21 g),and shrimp biomass(211.35 g).In contrast,supplementation with 1.5%*** powder(T-2)did not improve the growth performance of white shrimp compared to control(p>0.05).Furthermore,it also affected the profile of the bacterial community in culture water as well as in shrimp *** with both microfungi could reduce the total number of bacteria in culture water at the end of the experiment,where the lowest number was obtained in treatment T-2(3.9×10^(5)CFU/mL),followed by M-2(9.9×10^(5)CFU/mL)and control(4.4×10^(6)CFU/mL).In the culture water,20 isolates of culturable bacteria were found during the trial,with the dominant bacteria in M-2:Bacillus cereus,Bacillus velezensis,Gordonia polyisoprenivorans,T-2:Acinetobacter sp.,Gordonia polyisoprenivorans,Micrococcus *** on average well colour development(AWCD),the highest bacterial activity was in the M-2(0.297-0.707),followed by T-2(0.226-0.717)and control(0.094-0.694).The highest substrate group utilised in M-2 and T-2 were polymers(0.896 and 1.348)and control:amines(0.100).The highest shannon diversity index was obtained in the M-2(2.508),followed by control(2.286)and the T-2(2.157).As many as

关键词： Microfungi Nutrition White shrimp Litopenaeus vannamei Grow-out Bacterial activity probiotic bacteria

Enhanced entropy generation and heat transfer characteristics of magnetic nano-encapsulated phase change materials in latent heat thermal energy storage systems

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 1051-1070页

作者： p.s.REDDY p.sREEDEVI Department of Mathematics Rajeev Gandhi Memorial College of Engineering and TechnologyNandyal 518501India

The objective of the current study is to investigate the importance of entropy generation and thermal radiation on the patterns of velocity,isentropic lines,and temperature contours within a thermal energy storage device filled with magnetic nanoencapsulated phase change materials(NEpCMs).The versatile finite element method(FEM)is implemented to numerically solve the governing *** effects of various parameters,including the viscosity parameter,ranging from 1 to 3,the thermal conductivity parameter,ranging from 1 to 3,the Rayleigh parameter,ranging from 102 to 3×10^(2),the radiation number,ranging from 0.1 to 0.5,the fusion temperature,ranging from 1.0 to 1.2,the volume fraction of NEpCMs,ranging from 2%to 6%,the stefan number,ranging from 1 to 5,the magnetic number,ranging from 0.1 to 0.5,and the irreversibility parameter,ranging from 0.1 to 0.5,are examined in detail on the temperature contours,isentropic lines,heat capacity ratio,and velocity ***,the heat transfer rates at both the cold and hot walls are analyzed,and the findings are presented *** results indicate that the time taken by the NEpCMs to transition from solid to liquid is prolonged inside the chamber region as the fusion temperatureθf ***,the contours of the heat capacity ratio Cr decrease with the increase in the stefan number ste.

关键词： volume fraction of nano-encapsulated phase change material(NEpCM) radiation stefan number heat capacity ratio entropy generation

Emission colour tuning in KLnF_(4):Yb^(3+),Er^(3+)/Ho^(3+)phosphor

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 57-65,I0002页

作者： Janani K Gayathri E Vijayatha V Ramasubramanian s Thiyagarajan p Department of science and Humanities Nehru Institute of TechnologyKaliapuramThirumalayampalayamCoimbatoreIndia Department of sciences Amrita School of Physical SciencesAmrita Vishwa VidyapeethamCoimbatoreIndia Department of physics Anna UniversityChennaiIndia

KLnF_(4):Yb^(3+),Er^(3+)/Ho^(3+)(Ln=Y,Yb,Gd)phosphors were prepared by solid-state reaction *** each of the Yb^(3+)/Er^(3+)and Yb^(3+)/Ho^(3+)co-doped phosphors independently,phase confirmation and morphological examination were accomplished using the X-ray diffraction technique and scanning electron microscope analysis.X-ray photoelectron spectroscopy analysis shows the charge state and existence of lanthanides and *** luminescence emissions of green and red colour were detected for the synthesized *** changes in the upconverted emission intensities and colour output pertaining to the change of the lanthanide host matrix along with dopants were investigated for the prepared *** the upconversion luminescence,erbium-doped samples exhibit a predominance of red emission while holmium-doped samples display a prevalence of green *** rare-earth Er/Ho doped KYbF4shows strong red emission compared to other ***_(4):Yb,Er/Ho exhibits relatively significant green upconve rsion emissions,while Yb,Er-doped KGdF_(4)host displays a 10-fold increase in green/red emission ratio with an increase in the input power of 20-780 *** photoluminescence studies and decay curve analysis were carried out using UV light excitation for the developed phosphors.A higher lifetime of 2.2 ms was measured for the downshifting red emission in the Ho doped KYbF_(4)*** study suggests a potential for colour tunability in the upconversion and downshifting emissions through host modifications to the fluoride phosphor.

关键词： Rare earths Energy transfer upconversion Downshifting Colour coordinates

Current perspective on amyloid aggregation accelerating properties of the artificial butter flavoring,diacetyl

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第10期19卷 2113-2114页

作者： Ashish p.Vartak swati s.More Center for Drug Design College of PharmacyUniversity of MinnesotaMinneapolisMNUSA

The amyloid—what peptide can resist its entropic bliss?Without kinetic barricades and chaperones,most peptides would simply tumble down that *** amyloid-β(Aβ) peptides are understood to underlie the hallmark pathology of Alzheimer's disease(AD) and are considered one of the causative factors for neurodegeneration and cognitive *** affects critical connected structures within the brain that are responsible for memory,language,and social behavior.

关键词： amyloid Alzheimer Aβ

Effects of site preparation methods on soil physical properties and outplanting success of coniferous seedlings in boreal forests

在线全文

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第2期35卷 70-80页

作者： Aleksey s.Ilintsev Elena N.Nakvasina Alexander p.Bogdanov Northern Research Institute of Forestry 13 Nikitova Str.Arkhangelsk 163062Russian Federation Department of silviculture and Forest Management Northern(Arctic)Federal University Named After M.V.LomonosovSevernoy Dviny Emb.17Arkhangelsk 163002Russian Federation

This study assessed the effect of patch scarification and mounding on the physical properties of the root layer and the success of tree planting in various types of *** study was conducted on 12 forest sites in taiga forests of the European part of Russia.A total of 54 plots were set up to assess seedling survival;root collar diameter,height,and heigh increment were measured for 240 seedlings to assess *** the rooting layer,240 soil samples were taken to determine physical *** study showed that soil treatment methods had no effect on bulk density and total porosity in Cladina ***,reduced soil moisture was noted,particularly in mounds,resulting in increased *** Myrtillus sites,there were increased bulk density,reduced soil moisture,and total porosity in the *** treatment in polytrichum sites resulted in reduced soil moisture and increased aeration *** the Myrtillus and polytrichum sites,patch scarification had no effects on physical *** polytrichum sites,survival rates,heights,and heigh increments of bareroot Norway spruce seedlings in mounds were higher than in patches;however,the same did not apply to *** Cladina and Myrtillus sites,there was no difference in growth for bareroot and containerised seedlings with different soil *** conditions and soil types should be considered when applying different soil treatment methods to ensure high survival rates and successful seedling growth.

关键词： Boreal forests Mechanical site preparation patch scarification Mounding soil properties Containerised seedlings Bareroot seedlings

Turbine passage secondary Flow Dynamics and Endwall Heat Transfer Under Different Inflow Turbulence

在线全文

学校读者我要写书评

暂无评论

Journal of Harbin Institute of Technology(New series) 2024年第3期31卷 51-62页

作者： Arjun K s Tide p s Biju N Division of Mechanical Engineering School of EngineeringCochin University of Science&TechnologyKalamassery 682022India

This study presents endwall hydrodynamics and heat transfer in a linear turbine cascade at Re 5×105 at low and high intensities of *** are numerically predicted using the standard ssT model and Reθ-γtransition model as well as using the high-resolution LEs *** major secondary flow components,comprising the horseshoe,corner,and passage vortices are recognized and the impact on heat or mass transfer is *** complicated behavior of turbine passage secondary flow generation and establishment are impacted by the perspective of boundary layer attributes and inflow *** passage vortex concerning the latest big leading-edge vane is generated by the enlargement of the circulation developed at the first instance adjacent to the pressure side becomes powerful and mixes with other vortex systems during its migration towards the suction *** study conclusions reveal that substantial enhancements are attained on the endwall surface,for the entire spanwise blade extension on the pressure surface,and in the highly 3-D region close to the endwall on the suction *** forecasted suction surface thermal exchange depicts great conformity with the measurement values and precisely reproduces the enhanced thermal exchange owing to the development and lateral distribution of the secondary flows along the midspan of the blade passage *** impacts of the different secondary flow structures on the endwall thermal exchange are described in depth.

关键词： turbine vane heat transfer endwall turbulence secondary flow

Optimum profiles of Endwall Contouring for Enhanced Net Heat Flux Reduction and Aerodynamic performance

在线全文

学校读者我要写书评

暂无评论

Journal of Harbin Institute of Technology(New series) 2024年第2期31卷 80-92页

作者： Arjun K s Tide p s Biju N Division of Mechanical Engineering School of EngineeringCochin University of Science&TechnologyKalamassery 682022India

successfully utilized non-axisymmetric endwalls to enhance turbine efficiencies(aerodynamic and turbine inlet temperatures)by controlling the characteristics of the secondary flow in a blade *** is accomplished by steady-state numerical hydrodynamics and deep knowledge of the field of *** of the interaction between mainstream and purge flow contributing supplementary losses in the stage,non-axisymmetric endwalls are highly susceptible to the inception of purge flow exit compared to the flat and any advantage rapidly *** conclusions reveal that the supreme endwall pattern could yield a lowering of the gross pressure loss at the design stage and is related to the size of the top-loss location being productively *** has led to diminished global thermal exchange lowered in the passage of the vane *** reverse flow adjacent to the suction side corner of the endwall is migrated farther from the vane surface,as the deviated pressure spread on the endwall accelerates the flow and progresses the reverse flow core still *** depleted association between the tornado-like vortex and the corner vortex adjacent to the suction side corner of the endwall is the dominant mechanism of control in the contoured end *** this publication,we show that the non-axisymmetric endwall contouring by selective numerical shape change method at most prominent locations is advantageous in lowering the thermal load in turbines to augment the net heat flux reduction as well as the aerodynamic performance using multi-objective optimization.

关键词： endwall contouring turbine vane heat transfer phantom cooling coolant injection net heat flux reduction aerodynamic performance

Exact solutions for magnetohydrodynamic nanofluids flow and heat transfer over a permeable axisymmetric radially stretching/shrinking sheet

在线全文

学校读者我要写书评

暂无评论

Chinese physics B 2024年第2期33卷 108-114页

作者： U.s.Mahabaleshwar G.p.Vanitha L.M.pérez Emad H.Aly I.pop Department of studies in Mathematics Davangere UniversityShivagangothriDavangereIndia Departamento de F´ısica FACIUniversidad de Tarapac´aCasilla 7DAricaChile Department of Mathematics Faculty of EducationAin Shams UniversityRoxyCairoEgypt Department of Mathematics Babes-Bolyai University400084 Cluj-NapocaRomania

We report on the magnetohydrodynamic impact on the axisymmetric flow of Al_(2)O_(3)/Cu nanoparticles suspended in H_(2)O past a stretched/shrinked *** the use of partial differential equations and the corresponding thermophysical characteristics of nanoparticles,the physical flow process is *** resultant nonlinear system of partial differential equations is converted into a system of ordinary differential equations using the suitable similarity *** transformed differential equations are solved *** of the magnetic parameter,solid volume fraction and stretching/shrinking parameter on momentum and temperature distribution have been analyzed and interpreted *** skin friction and Nusselt number were also *** addition,existence of dual solution was deduced for the shrinking sheet and unique solution for the stretching ***,Al_(2)O_(3)/H_(2)O nanofluid flow has better thermal conductivity on comparing with Cu/H_(2)O ***,it was found that the first solutions of the stream are stable and physically realizable,whereas those of the second ones are unstable.

关键词： magnetohydrodynamic nanofluid stretching/shrinking sheet axisymmetric flow analytical solution suction/injection

Wettability,reactivity,and interface structure in Mg/Ni system

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 659-672页

作者： s.Terlicka N.sobczak Ł.Maj p.Darłak J.J.sobczak Institute of Metallurgy and Materials science Polish Academy of Sciences25 Reymonta Str.KrakowPoland Faculty of Foundry Engineering AGH University23 Reymonta Str.KrakowPoland

The sessile drop method was applied to the experimental investigation of the wetting and spreading behaviors of liquid Mg drops on pure Ni *** comparison,the experiments were performed in two variants:(1)using the Capillary purification(Cp)procedure,which allows the non-contact heating and squeezing of a pure oxide-free Mg drop;(2)by classical Contact Heating(CH)*** high-temperature tests were performed under isothermal conditions(Cp:760℃for 30 s;CH:715℃for 300 s)using Ar+5 wt%H_(2) *** the sessile drop tests,images of the Mg/Ni couples were recorded by CCD cameras(57 fps),which were then applied to calculate the contact angles of metal/substrate *** and transmission electron microscopy analyses,both coupled with energy-dispersive X-ray spectroscopy,were used for detailed structural characterization of the solidified *** was found that an oxide-free Mg drop obtained by the Cp procedure showed a wetting phenomenon on the Ni substrate(an average contact angleθs),followed by fast spreading and good wetting over the Ni substrate(θ_((Cp))~20°in 5 s)to form a final contact angle ofθ_(f(Cp))~18°.In contrast,a different wetting behavior was observed for the CH procedure,where the unavoidable primary oxide film on the Mg surface blocked the spreading of liquid Mg showing apparently non-wetting behavior after 300 s contact at the test ***,in both cases,the deep craters formed in the Ni substrates under the Mg drops and significant change in the structure of initially pure Mg drops to Mg-Ni alloys suggest a strong dissolution of Ni in liquid Mg and apparent values of the final contact angles measured for the Mg/Ni system.

关键词： Magnesium-based alloys sessile drop tests Capillary purification procedure Wettability Reactivity Contact angle