检索结果-南通市图书馆

Block Incremental Dense Tucker Decomposition with Application to Spatial and Temporal Analysis of Air Quality Data

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第4期139卷 319-336页

作者： SangSeok Lee Haewon moon Lee Sael Department of Artificial Intelligence Ajou UniversitySuwon-si16499Korea Department of Software and Computer Engineering Ajou UniversitySuwon-si16499Korea

How can we efficiently store and mine dynamically generated dense tensors for modeling the behavior of multidimensional dynamic data?Much of the multidimensional dynamic data in the real world is generated in the form of time-growing *** example,air quality tensor data consists of multiple sensory values gathered from wide locations for a long *** data,accumulated over time,is redundant and consumes a lot ofmemory in its raw *** need a way to efficiently store dynamically generated tensor data that increase over time and to model their behavior on demand between arbitrary time *** this end,we propose a Block IncrementalDense Tucker Decomposition(BID-Tucker)method for efficient storage and on-demand modeling ofmultidimensional spatiotemporal *** that tensors come in unit blocks where only the time domain changes,our proposed BID-Tucker first slices the blocks into matrices and decomposes them via singular value decomposition(SVD).The SVDs of the time×space sliced matrices are stored instead of the raw tensor blocks to save *** modeling from data is required at particular time blocks,the SVDs of corresponding time blocks are retrieved and incremented to be used for Tucker *** factor matrices and core tensor of the decomposed results can then be used for further data *** compared our proposed BID-Tucker with D-Tucker,which our method extends,and vanilla Tucker *** show that our BID-Tucker is faster than both D-Tucker and vanilla Tucker decomposition and uses less memory for storage with a comparable reconstruction *** applied our proposed BID-Tucker to model the spatial and temporal trends of air quality data collected in South Korea from 2018 to *** were able to model the spatial and temporal air quality *** were also able to verify unusual events,such as chronic ozone alerts and large fire events.

关键词： Dynamic decomposition tucker tensor tensor factorization spatiotemporal data tensor analysis air quality

The quasi-Gramian solution of a non-commutative extension of the higher-order nonlinear Schr?dinger equation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第3期76卷 51-61页

作者： H w A Riaz j Lin Department of Physics Zhejiang Normal UniversityJinhua 321004China

The nonlinear Schr?dinger(NLS)equation,which incorporates higher-order dispersive terms,is widely employed in the theoretical analysis of various physical *** this study,we explore the non-commutative extension of the higher-order NLS *** treat real or complex-valued functions,such as g_(1)=g_(1)(x,t)and g_(2)=g_(2)(x,t)as non-commutative,and employ the Lax pair associated with the evolution equation,as in the commutation *** derive the quasi-Gramian solution of the system by employing a binary Darboux *** soliton solutions are presented explicitly within the framework of *** visually understand the dynamics and solutions in the given example,we also provide simulations illustrating the associated ***,the solution can be used to study the stability of plane waves and to understand the generation of periodic patterns within the context of modulational instability.

关键词： integrable systems Darboux transformation solitons

Erythrocytes serve as a template to create nanozymes with uniform Fe single-atom sites for healing bacteria-infected wound

在线全文

学校读者我要写书评

暂无评论

Science China(Life Sciences) 2024年第9期67卷 2048-2050页

作者： Thinh Viet Dang moon Il Kim Department of BioNano Technology Gachon UniversitySeongnam 13120Republic of Korea

Bacterial infection is recognized as one of the biggest global health threats,causing millions of people's death every year(wang et al.,2020).Traditional antibiotics-based therapies have been widely utilized to control this issue(Kohanski et al.,2010);however,their excessive use leads to the emergence of antibioticresistant bacteria,endangering to human health(Levy and Marshall,2004).

关键词： template healing utilized

Uniportal video-assisted thoracoscopic fissureless right upper lobe anterior segmentectomy for inflammatory myofibroblastic tumor:A case report

在线全文

学校读者我要写书评

暂无评论

world journal of Clinical Cases 2024年第2期12卷 425-430页

作者： Seha Ahn Youngkyu moon Department of Thoracic and Cardiovascular Surgery Eunpyeong St.Mary’s HospitalCollege of MedicineThe Catholic University of KoreaSeoul 03312South Korea

BACKGROUND Inflammatory myofibroblastic tumors(IMTs)are exceptionally rare neoplasms with intermediate malignant *** is the accepted treatment option,aiming for complete resection with clear *** SUMMARY A 39-year-old woman presented with a growing solitary pulmonary nodule measuring 2.0 cm in the right upper lobe(RUL)of the *** patient underwent a RUL anterior segmentectomy using uniportal video-assisted thoracoscopy.A preliminary tissue diagnosis indicated malignancy;however,it was later revised to an *** to the absence of a minor fissure between the right upper and middle lobes,an alternative resection approach was ***,we utilized indocyanine green injection to aid in delineating the intersegmental *** an uneventful recovery,the patient was discharged on the third postoperative ***,annual chest tomography scans were scheduled to monitor for potential local *** This case underscores the challenges in diagnosing and managing IMTs,showing the importance of accurate pathologic assessments and tailored surgical strategies.

关键词： Uniportal video-assisted thoracoscopic surgery Fissureless Anterior segmentectomy Inflammatory fibroblastic tumor Case report

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 316-331页

作者： H.T.jeong S.w.Lee w.j.Kim Department of Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

The superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy(LAZ1011)with a grain size of 3.2μm,primarily composed of the BCCβphase and a small amount of the HCPαphase,were examined in a temperature range of 473 K to 623 *** microstructural refinement of this alloy was achieved by employing high-ratio differential speed *** best superplasticity was achieved at 523 K and at strain rates of 10^(-4)-5×10^(-4)s^(-1),where tensile elongations of 550±600%were *** the heating and holding stage of the tensile samples prior to tensile loading,a significant increase in grain size was observed at temperatures above 573 ***,it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and *** the investigated strain rate range,the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding,while at high strain rates,lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation *** was concluded that solute drag creep is unlikely to *** the late stages of deformation at 523 K,it was observed that grain boundary sliding led to the agglomeration of theαphase,resulting in significant strain *** mechanism maps were constructed forβ-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate,stress,temperature,and grain size,using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

关键词： Magnesium-lithium alloy Superplasticity Severe plastic deformation Grain size Grain growth

Development and application of a multi-step porcine in vitro system to evaluate feedstuffs and feed additives for their efficacy in nutrient digestion, digesta characteristics, and intestinal immune responses

在线全文

学校读者我要写书评

暂无评论

Animal Nutrition 2024年第2期17卷 265-282页

作者： Hee Yeon Kim jun-Ok moon Sung woo Kim Application Center CJ Blossom Park Department of Animal Science North Carolina State University

In vitro model provides alternatives to the use of live animals in research. In pig nutrition, there has been a tremendous increase in in vivo research over the decades. Proper utilization of in vitro models could provide a screening tool to reduce the needs of in vivo studies, research duration, cost, and the use of animals and feeds. This study aimed to develop a multi-step porcine in vitro system to simulate nutrient digestion and intestinal epithelial immune responses affected by feedstuffs and feed additives. Seven feedstuffs(corn, corn distillers dried grains with solubles [corn DDGS], barley, wheat, soybean meal, soy protein concentrates, and Corynebacterium glutamicum cell mass [CGCM]), feed enzymes(xylanase and phytase), and supplemental amino acids(arginine, methionine, and tryptophan), were used in this in vitro evaluation for their efficacy on digestibility, digesta characteristics, and intestinal health compared with the results from previously published in vivo studies. All in vitro evaluations were triplicated. Data were analyzed using Mixed procedure of SAS9.4. Evaluations included(1) nutrient digestibility of feedstuffs,(2) the effects of feed enzymes, xylanase and phytase, on digestibility of feedstuffs and specific substrates, and(3) the effects of amino acids, arginine, tryptophan, and methionine, on anti-inflammatory, anti-oxidative, and anti-heat stress statuses showing their effects(P well as effects of xylanase and phytase were detected(P wed the use of 3 experimental replications providing sufficient statistical power at P < 0.05. This indicates in vitro models can have increased prec

关键词： Digestion Feed additive Feedstuff In vitro Intestine Pig

Compressive property and energy absorption characteristic of interconnected porous Mg-Zn-Y alloys with adjusting Y addition

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 171-185页

作者： j.A.Liu S.j.Liu B.wang w.B.Sun X.j.Liu Z.w.Han College of Materials Science and Engineering Key Laboratory of Automobile Materials(Ministry of Education)Jilin UniversityChangchun 130022PR China Key Laboratory of Bionic Engineering(Ministry of Education) College of Biological and Agricultural EngineeringJilin UniversityChangchun130022PR China weihai Institute for Bionics-jilin University Weihai 264205PR China

In this study,interconnected porous Mg-2Zn-xY alloys with different phase compositions were prepared by various Y additions(x=0.4,3,and 6 wt.%)to adjust the compressive properties and energy absorption *** characterization methods were then applied to identify the microstructure of the porous Mg-Zn-Y and describe the details of the second *** tests were performed at room temperature(RT),200℃,and 300℃to study the impact of the Y addition and testing temperature on the compressive properties of the porous *** experimental results showed that a high Y content promotes a microstructure refinement and increases the volume fraction of the second *** the Y content increases,different Mg-Zn-Y ternary phases appear:I-phase(Mg_(3)Zn_(6)Y),w-phase(Mg_(3)Zn_(3)Y_(2)),and LPSO phase(Mg_(12)ZnY).when the Y content ranges between 0.4%and 6%,the compressive strength increases from 6.30MPa to 9.23 MPa,and the energy absorption capacity increases from 7.33 Mj/m^(3)to 10.97 Mj/m^(3)at RT,which is mainly attributed to the phase composition and volume fraction of the second ***,the average energy absorption efficiency is independent of the Y *** addition,the compressive deformation behaviors of the porous Mg-Zn-Y are altered by the testing *** compressive strength and energy absorption capacity of the porous Mg-Zn-Y decrease due to the softening effect of the high temperature on the *** deformation behaviors at different temperatures are finally observed to reflect the failure mechanisms of the struts.

关键词： Porous magnesium Rare earth elements Microstructure Compressive behavior Energy absorption characteristic

Analytical investigations of in situ stress inversion from borehole breakout geometries

在线全文

学校读者我要写书评

暂无评论

journal of Rock Mechanics and Geotechnical Engineering 2024年第7期16卷 2375-2387页

作者： Zizhuo Xiang Taehyun moon joung Oh Guangyao Si Ismet Canbulat School of Minerals and Energy Resources Engineering University of New South WalesSydneyNSW2052Australia HNTB Corporation 3505th Ave.58th FloorNew YorkNY10118USA

This study aims to investigate the feasibility of deriving in situ horizontal stresses from the breakout width and depth using the analytical ***-three breakout data with different borehole sizes were collected and three failure criteria were *** on the Kirsch equations,relatively accurate major horizontal stress(sH)estimations from known minor horizontal stress(sh)were achieved with percentage errors ranging from 0.33%to 44.08%using the breakout *** Mogi-Coulomb failure criterion(average error:13.1%)outperformed modified wiebols-Cook(average error:19.09%)and modified Lade(average error:18.09%)failure ***,none of the tested constitutive models could yield reasonable sh predictions from known sH using the same approach due to the analytical expression of the redistributed stress and the nature of the constitutive *** consideration of this issue,the horizontal stress ratio(sH/sh)is suggested as an alternative input,which could estimate both sH and sh with the same level of ***,the estimation accuracies for both large-scale and laboratory-scale breakouts are comparable,suggesting the applicability of this approach across different breakout *** breakout depth,conformal mapping and complex variable method were used to calculate the stress concentration around the breakout tip,allowing the expression of redistributed stresses using binomials composed of sH and ***,analysis of the breakout depth stabilisation mechanism indicates that additional parameters are required to utilise normalised breakout depth for stress estimation compared to breakout *** parameters are challenging to obtain,especially under field conditions,meaning utilising normalised breakout depth analytically in practical applications faces significant challenges and remains infeasible at this ***,the normalised breakout depth should still be considered a critical input for any empirical and statistical stres

关键词： Borehole failure In situ stress estimation In situ horizontal stress ratio Conformal mapping Complex variable method Breakout stabilisation

Recent Advances in Patterning Strategies for Full‑Color Perovskite Light‑Emitting Diodes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第3期16卷 99-137页

作者： Gwang Heon Lee Kiwook Kim Yunho Kim j.w.ong Yang moon Kee Choi Graduate School of Semiconductor Materials and Devices Engineering Center for Future Semiconductor Technology(FUST)Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy Science and Engineering Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Energy Science and Engineering Research Center Daegu Gyeongbuk Institute of Science and Technology(DGIST)Daegu 42988Republic of Korea Department of Materials Science and Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Center for Nanoparticle Research Institute for Basic Science(IBS)Seoul 08826Republic of Korea

Metal halide perovskites have emerged as promising light-emitting materials for next-generation displays owing to their remarkable material characteristics including broad color tunability,pure color emission with remarkably narrow bandwidths,high quantum yield,and solution *** recent advances have pushed the luminance efficiency of monochromic perovskite light-emitting diodes(PeLEDs)to their theoretical limits,their current fabrication using the spincoating process poses limitations for fabrication of full-color *** integrate PeLEDs into full-color display panels,it is crucial to pattern red–green–blue(RGB)perovskite pixels,while mitigating issues such as cross-contamination and reductions in luminous ***,we present state-of-the-art patterning technologies for the development of full-color ***,we highlight recent advances in the development of efficient ***,we discuss various patterning techniques of MPHs(i.e.,photolithography,inkjet printing,electron beam lithography and laserassisted lithography,electrohydrodynamic jet printing,thermal evaporation,and transfer printing)for fabrication of RGB pixelated *** patterning techniques can be classified into two distinct approaches:in situ crystallization patterning using perovskite precursors and patterning of colloidal perovskite *** review highlights advancements and limitations in patterning techniques for PeLEDs,paving the way for integrating PeLEDs into full-color panels.

关键词： Perovskite Light-emitting diode Full-color display High-resolution patterning Electroluminescence