检索结果-南通市图书馆

Atomically Substitutional Engineering of Transition Metal Dichalcogenide Layers for Enhancing Tailored Properties and Superior Applications

引用

Nano-Micro Letters 2024年第5期16卷 248-284页

作者： Zhaosu Liu Si Yin Tee Guijian Guan ming‑yong han Institute of Molecular Plus Tianjin UniversityTianjin 300072People’s Republic of China Institute of Materials Research and Engineering A*STARSingapore 138634Singapore

Transition metal dichalcogenides(TMDs)are a promising class of layered materials in the post-graphene era,with extensive research attention due to their diverse alternative elements and fascinating semiconductor behavior.Binary MX2 layers with different metal and/or chalcogen elements have similar structural parameters but varied optoelectronic properties,providing opportunities for atomically substitutional engineering via partial alteration of metal or/and chalcogenide atoms to produce ternary or quaternary TMDs.The resulting multinary TMD layers still maintain structural integrity and homogeneity while achieving tunable(opto)electronic properties across a full range of composition with arbitrary ratios of introduced metal or chalcogen to original counterparts(0–100%).Atomic substitution in TMD layers offers new adjustable degrees of freedom for tailoring crystal phase,band alignment/structure,carrier density,and surface reactive activity,enabling novel and promising applications.This review comprehensively elaborates on atomically substitutional engineering in TMD layers,including theoretical foundations,synthetic strategies,tailored properties,and superior applications.The emerging type of ternary TMDs,Janus TMDs,is presented specifically to highlight their typical compounds,fabrication methods,and potential applications.Finally,opportunities and challenges for further development of multinary TMDs are envisioned to expedite the evolution of this pivotal field.

关键词： Transition metal dichalcogenides Atomic substitution Tailored structure Tunable bandgap Enhanced applications

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

How the enhanced East Asian summer monsoon regulates total gross primary production in eastern China

引用

Advances in Climate Change Research 2024年第2期15卷 244-252页

作者： ming-Yu han yong ZhanG Jing PENG China State Key Laboratory of Severe Weather Chinese Academy of Meteorological SciencesBeijing 100081China China Meteorological Administration Institute for Development and Programme Design Beijing 100081China CAS Key Laboratory of Regional Climate-Environment for Temperate East Asia Institute of Atmospheric PhysicsChinese Academy of Sciences(CAS)Beijing 100029China

Recognizing the relationship between gross primary production(GPP)and precipitation in eastern China,the East Asian Summer Monsoon(EASM)plays a crucial role in shaping GPP.Despite confirmation of the strong link between EASM and GPP,there remains a notable research gap in understanding the specific impact of the EASM on GPP in different regions of eastern China.Here we used simulations from Trends in Net Land-Atmosphere Carbon Exchanges(TRENDY)models from 1951 to 2010 and divided eastern China into five subregions for the study.We also used the New East Asian Summer Monsoon Index(NEWI)as a quantitative metric to distinguish between periods of strong and weak EASM.Building on this,this study aims to investigate the response of GPP in different subregions of eastern China.Regionally,under strengthened EASM years(1954,1957,1965,1969,1977,1980,1983,1987,1993 and 1998),East China experienced the most pronounced increase in GPP at 12±21(mean±1 sigma)gC m^(-2) mon^(-1) compared to the weak EASM years(1958,1961,1972,1973,1978,1981,1985,1994,1997 and 2004).In contrast,Southwest China showed a decline in GPP at-4±10 gC m^(-2) mon^(-1).Moreover,GPP also increased in Northeast and North China when EASM strengthened,while South China showed a decline in GPP.This indicated that GPP changed with monsoon intensity.According to the mechanism analysis,during strong EASM,there was intense moisture convergence through alterations in the atmospheric circulation field over East China and abundant precipitation,which further contributed to the increase in GPP.Downward solar radiation in Southwest China decreased with EASM enhancement,which suppressed GPP and hindered vegetation growth.Overall,the results highlight the importance of accurately predicting the impact of different EASM intensities of regional carbon fluxes.

关键词： Gross primary production Surface air temperature Precipitation Solar radiation Eastern China Carbon cycle

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

TuBG1 promotes hepatocellular carcinoma via ATR/P53-apoptosis and cycling pathways

引用

Hepatobiliary & Pancreatic Diseases International 2024年第2期23卷 195-209页

作者： Yan Zhang Zhen-Zhen Wang An-Qi han ming-Ya Yang Li-Xin Zhu Fa-ming Pan yong Wang Department of General Surgery The Second Hospital of Anhui Medical UniversityHefei 230601China Department of General Surgery The First Affiliated Hospital of Anhui Medical UniversityHefei 230022China Department of Epidemiology and Biostatistics School of Public HealthAnhui Medical UniversityHefei 230032China The Key Laboratory of Major Autoimmune Diseases Anhui Medical UniversityHefei 230032China

Background:As reported,γ-tubulin(TuBG1)is related to the occurrence and development of various types of malignant tumors.However,its role in hepatocellular cancer(HCC)is not clear.The present study was to investigate the relationship between TuBG1 and clinical parameters and survival in HCC patients.Methods:The correlation between TuBG1 and clinical parameters and survival in HCC patients was ex-plored by bioinformatics analysis.Immunohistochemistry was used for the verification.The molecular function of TuBG1 was measured using colony formation,scratch assay,trans-well assay and flow cytometry.Gene set enrichment analysis(GSEA)was used to pick up the enriched pathways,followed by investigating the target pathways using Western blotting.The tumor-immune system interactions and drug bank database(TISIDB)was used to evaluate TuBG1 and immunity.Based on the TuBG1-related immune genes,a prognostic model was constructed and was further validated internally and externally.Results:The bioinformatic analysis found high expressed TuBG1 in HCC tissue,which was confirmed us-ing immunohistochemistry and Western blotting.After silencing the TuBG1 in HCC cell lines,more G1 arrested cells were found,cell proliferation and invasion were inhibited,and apoptosis was promoted.Furthermore,the silence of TuBG1 increased the expressions of Ataxia-Telangiectasia and Rad-3(ATR),phospho-P38 mitogen-activated protein kinase(P-P38MAPK),phospho-P53(P-P53),B-cell lymphoma-2 associated X protein(Bax),cleaved caspase 3 and P21;decreased the expressions of B-cell lymphoma-2(Bcl-2),cyclin D1,cyclin E2,cyclin-dependent kinase 2(CDK2)and CDK4.The correlation analysis of immunohistochemistry and clinical parameters and survival data revealed that TuBG1 was negatively corre-lated with the overall survival.The constructed immune prognosis model could effectively evaluate the prognosis.Conclusions:The increased expression of TuBG1 in HCC is associated with poor prognosis,which might be involved in the occurrence and development of HCC.

关键词： TuBG1 Hepatocellular carcinoma Apoptosis Cell cycling Immunomodulators

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Random Raman Fiber Laser as a Liquid Refractive Index Sensor

引用

Photonic Sensors 2024年第1期14卷 13-22页

作者： Bing han Yuxi MA han WU yong ZHAO College of Information Science and Engineering Northeastern UniversityShenyang 110819China Hebei Key Laboratory of Micro-Nano Precision Optical Sensing and Measurement Technology Qinhuangdao 066004China College of Electronics and Information Engineering Sichuan UniversityChengdu 610064China

In this paper,a new concept of forward-pumped random Raman fiber laser(RRFL)-based liquid refractive index sensing is proposed for the first time.For liquid refractive index sensing,the flat fiber end immersed in the liquid can act as the point reflector for generating random fiber lasing and also as the sensing head.Due to the high sensitivity of the output power of the RRFL to the reflectivity provided by the point reflector in the ultralow reflectivity regime,the proposed RRFL is capable of achieving liquid refractive index sensing by measuring the random lasing output power.We theoretically investigate the effects of the operating pump power and fiber length on the refractive index sensitivity for the proposed RRFL.As a proof-of-concept demonstration,we experimentally realize high-sensitivity half-open short-cavity RRFL-based liquid refractive index sensing with the maximum sensitivity and the sensing resolution of-39.88W/RIU and 2.5075×10^(-5) RIU,respectively.We also experimentally verify that the refractive index sensitivity can be enhanced with the shorter fiber length of the RRFL.This work extends the application of the random fiber laser as a new platform for highly-sensitive refractive index sensing in chemical,biomedical,and environmental monitoring applications,etc.

关键词： Fiber optic sensors refractive index measurements fiber lasers Rayleigh scattering stimulated Raman scattering

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Developing a diagnostic model for predicting prostate cancer: a retrospective study based on Chinese multicenter clinical data

引用

Asian Journal of Andrology 2024年第1期26卷 34-40页

作者： Chang-ming Wang Lei Yuan Xue-han Liu Shu-Qiu Chen Hai-Feng Wang Qi-Fei Dong Bin Zhang ming-Shuo Huang Zhi-yong Zhang Jun Xiao Tao Tao Department of Urology The First Affiliated Hospital of USTCDivision of Life Sciences and MedicineUniversity of Science and Technology of ChinaHefei 230001China Department of Radiology The First Affiliated Hospital of USTCDivision of Life Sciences and MedicineUniversity of Science and Technology of ChinaHefei 230001China Core Facility Center for Medical Sciences The First Affiliated Hospital of USTcDivision of Life Sciences and MedicineUniversity of Science and Technology of ChinaHefei 230001China Department of Urology Affiliated Zhongda Hospital of Southeast UniversityNanjing 210009China Department of Urology Shanghai East HospitalTongji University School of MedicineShanghai 200120China Department of Urology Shanghai Changhai HospitalSecond Military Medical UniversityShanghai 200000China Department of Urology Affiliated Anhui Provincial Hospital of Anhui Medical UniversityHefei 230001China

The overdiagnosis of prostate cancer(PCa)caused by nonspecific elevation serum prostate-specific antigen(PSA)and the overtreatment of indolent PCa have become a global problem that needs to be solved urgently.We aimed to construct a prediction model and provide a risk stratification system to reduce unnecessary biopsies.In this retrospective study,clinical data of 1807 patients from three Chinese hospitals were used.The final model was built using stepwise logistic regression analysis.The apparent performance of the model was assessed by receiver operating characteristic curves,calibration plots,and decision curve analysis.Finally,a risk stratification system of clinically significant prostate cancer(csPCa)was created,and diagnosis-free survival analyses were performed.Following multivariable screening and evaluation of the diagnostic performances,a final diagnostic model comprised of the PSA density and Prostate Imaging-Reporting and Data System(PI-RADS)score was established.Model validation in the development cohort and two external cohorts showed excellent discrimination and calibration.Finally,we created a risk stratification system using risk thresholds of 0.05 and 0.60 as the cut-off values.The follow-up results indicated that the diagnosis-free survival rate for csPCa at 12 months and 24 months postoperatively was 99.7%and 99.4%,respectively,for patients with a risk threshold below O.05 after the initial negative prostate biopsy,which was significantly better than patients with higher risk.Our diagnostic model and risk stratification system can achieve a personalized risk calculation of csPCa.It provides a standardized tool for Chinese patients and physicians when considering thenecessity of prostatebiopsy.

关键词： nomogram prostate biopsy prostate cancer Prostate Imaging-Reporting and Data System prostate-specific antigen density

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Interplay between geometric and electronic structures of Pt entities over TiO_(2) for CO oxidation

引用

Science China Chemistry 2024年第2期67卷 705-714页

作者： Xixiong Zhang Wen Shi Shaobo han yong Li Wenjie Shen School of Chemistry Dalian University of TechnologyDalian116024China State Key Laboratory of Catalysis Dalian Institution of Chemical PhysicsChinese Academy of SciencesDalian116023China

Monodispersed Pt colloids with a mean size of 2 nm were deposited uniformly on the {110} facets of a rod-shaped rutile TiO_(2),forming a well-defined Pt/TiO_(2) system.Oxidative treatment of this precursor at elevated temperatures re-dispersed the Pt particles into clusters and single-atoms.Air-calcination at 673 K partially oxidized the Pt particle surface,while calcination at 773 K yielded Pt Oxclusters of 1.6 nm in 7–8 atomic layers.Further calcination at 873 K formed a mixture of raft-like PtO_(x) clusters(1.6 nm,1–2 atomic layers) and cationic single-atoms.When tested for CO oxidation at 373 K,the Pt particles showed a higher activity than the Pt Oxclusters,whereas the cationic single-atoms were much less active.Subsequent H_(2)-reduction at 473 K converted the partially oxidized Pt particles into the metallic species,but they were encapsulated by TiO_(2)–xoverlayers because of the strong metal–support interactions,which decreased the activity dramatically.H_(2)-reduction of the PtO_(x) clusters at473 K enhanced the fraction of metallic Pt species without changing the size and geometry,and promoted the activity substantially.H_(2)-treatment of Pt single-atoms at 473 K increased the activity only moderately because most Pt species still kept at cationic species.These results straightforwardly differentiated the catalytic behavior of Pt particles,clusters and single-atoms at the same metal loading and over the same TiO_(2) support,and further demonstrated that the electronic structures of Pt entities played a decisive role in the catalytic oxidation,in addition to the specified sizes.

关键词： Pt/TiO_(2)catalyst size effect Pt clusters active sites electronic structures CO oxidation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Exploring the potential for improving material utilization efficiency to secure lithium supply for China's battery supply chain

引用

Fundamental Research 2024年第1期4卷 167-177页

作者： Xin Sun han Hao yong Geng Zongwei Liu Fuquan Zhao State Key Laboratory of Automotive Safety and Energy Tsinghua UniversityBeijing 100084China Belfer Center for Science and International Affairs Harvard UniversityCambridgeMA 02138United States Tsinghua-Rio Tinto Joint Research Center for Resources Energy and Sustainable Development Tsinghua UniversityBeijing 100084China School of International and Public Affairs Shanghai Jiao Tong UniversityShanghai 200240China

Lithium-ion battery(LIB)is the key technology for climate change mitigation.The sustainability of LIB supply chain has caused widespread concern since the material utilization efficiency of LIB supply chain has not been well investigated.This study aims to fill this research gap by conducting a dynamic material flow analysis of lithium in China from 2015 to 2021.Results indicate that within the temporal boundary,lithium flow and in-use stock grew significantly in China due to the rapid development of the EV market,with lithium flow in domestic production of basic chemicals increasing by 614%to 100 kt,end-use consumption increasing by 160%to 35 kt,and in-use stock increasing by 62%to 195 kt.China has been a net importer of lithium,of which cumulative imports and exports were 343 kt and 169 kt,respectively.In addition,103 kt of lithium was converted to inventories or was lost during the processing from 2015 to 2021.By optimizing inventory and processing,developing substitutes for lithium for non-battery applications,and improving lithium recycling,China's net import dependency of lithium could be reduced from 27%-86%to 0%-16%.Our study demonstrates that it is urgent to improve material utilization efficiency so that the lithium resource supply can be secured.

关键词： Lithium Lithium-ion battery Critical material Supply chain Material flow analysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

One-step calcination synthesis of interface-coherent crystallized and surface-passivated LiNi_(0.5)Mn_(1.5)O_(4) for high-voltage lithium-ion battery

引用

Nano Research 2024年第5期17卷 4192-4202页

作者： Min Xu Bifu Sheng yong Cheng Junjie Lu Minfeng Chen Peng Wang Bo Liu Jizhang Chen Xiang han ming-Sheng Wang Siqi Shi College of Materials Science and Engineering Co-Innovation Center of Efficient Processing and Utilization of Forest ResourcesNanjing Forestry UniversityNanjing 210037China State Key Laboratory of Physical Chemistry of Solid Surfaces College of MaterialsXiamen UniversityXiamen 361005China College of Mathematics and Physics Jinggangshan UniversityJi’an 343009China School of Materials Science and Engineering Shanghai UniversityShanghai 200444China Western Digital Corporation 951 Sandisk DrMilpitasCA 95035USA

LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)with a spinel crystal structure presents a compelling avenue towards the development of economic cobalt-free and high voltage(~5 V)lithium-ion batteries.Nevertheless,the elevated operational voltage of LNMO gives rise to pronounced interfacial interactions between the distorted surface lattices characterized by Jahn-Teller(J-T)distortions and the electrolyte constituents.Herein,a localized crystallized coherent LaNiO_(3) and surface passivated Li_(3)PO_(4) layer is deposited on LNMO via a one-step calcination process.As evidenced by transmission electron microscopy(TEM),time-of-flight secondary ion mass spectrometry(ToF-SIMS)and density functional theory(DFT)calculation,the epitaxial growth of LaNiO_(3) along the LNMO lattice can effectively stabilize the structure and inhibit irreversible phase transitions,and the Li_(3)PO_(4) surface coating can prevent the chemical reaction between HF and transition metals without sacrificing the electrochemical activity.In addition,the ionic conductive Li_(3)PO_(4) and atomic wetting inter-layer enables fast charge transfer transport property.Consequently,the LNMO material enabled by the lattice bonding and surface passivating features,demonstrates high performance at high current densities and good capacity retention during long-term test.The rational design of interface coherent engineering and surface coating layers of the LNMO cathode material offers a new perspective for the practical application of high-voltage lithium-ion batteries.

关键词： high-voltage cathode interface-coherent surface passivating electrochemical performance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Influence of Micro/Nano-Ti Particles on the Corrosion Behavior of AZ31-Ti Composites

引用

Acta Metallurgica Sinica(English Letters) 2024年第3期37卷 484-498页

作者： Jinchao Jiao Jin Zhang yong Lian Shengli han Kaihong Zheng Fusheng Pan Institute for Advanced Materials and Technology University of Science and Technology BeijingBeijing 10083China Beijing Key Laboratory for Corrosion Erosion and Surface Technology Beijing 100083China Institute of New Materials Guangdong Academy of SciencesGuangzhou 510650China National Engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 404100China

Adding Ti particles to magnesium alloy simultaneously enhances its strength and ductility.However,how these particles influence on Mg alloy’s corrosion performance is seldom reported.The corrosion behavior of AZ31-Ti composites containing titanium nanoparticles(1.5 and 5 wt%)and micron particles(10 wt%)prepared by powder metallurgical in 3.5 wt%NaCl solution was investigated.The results indicate that Ti particles serve as the primary location for the cathodic hydrogen reduction reaction,resulting in intense galvanic corrosion between the Ti and Mg matrix.Ti nanoparticles distributed at the interface of the original AZ31 powder were in a discontinuous mesh structure,thus failing to act as a barrier against corrosion.The corrosion products with the existence of numerous cracks gradually peel off during the corrosion process and cannot protect the matrix.The average corrosion rate P_(w) of AZ31,AZ31-1.5%Ti,AZ31-5%Ti,and AZ31-10%Ti after 7 days of immersion is 27.55,105.65,283.67,and 99.35 mm/y,respectively.Therefore,AZ31-Ti composites can be considered as potential candidates for degradable fracturing tools.Otherwise,it is recommended to improve their corrosion resistance through surface treatment.

关键词： AZ31-Ti composite Nano-Ti Micro-Ti Corrosion behavior Scanning Kelvin probe force microscopy(SKPFM)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Printable,flexible ceramic fiber paper based on electrospinning

引用

Rare Metals 2024年第6期43卷 2739-2746页

作者： yong-Shuai Xie Yuan Cheng Yang Lyu Rui Li Jie-Cai han National Key Laboratory of Science and Technology on Advanced Composites in Special Environments Harbin Institute of Technology State Key Laboratory of Intelligent Manufacturing Equipment and Technology Huazhong University of Science and Technology

Based on the fact that it is challenging for the polymer flexible circuit substrates to meet the requirements of serving in high-temperature environments,this work proposed the idea of using printable ceramic fiber paper as a high-temperature flexible circuit substrate.A ceramic fiber paper with all ceramic components had been developed via electrospinning,solving the problems of low strength and severe strength drop at high temperatures of traditional ceramic fiber paper.The tensile strength of the prepared ceramic fiber paper is 2.63 MPa,and the reliable service temperature is 1200℃.Its bulk density is about 1.5 times that of traditional ceramic fiber paper.It can be printed with patterns by commercial inkjet printers like ordinary printing paper and has excellent printability.The feasibility of ceramic fiber paper as a flexible circuit substrate was verified by constructing a simple circuit.When the fiber paper is significantly bent,the circuit still forms a complete path,which proves that it has a strong application potential for high-temperature flexible circuit substrate and is expected to promote the development of flexible electronic devices serving at extreme high-temperature environments.

关键词： Ceramic fiber paper High temperature Inkjet printing Flexible electronic

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：