检索结果-南通市图书馆

Customizable design ofmultiple-biomolecule delivery platform for enhanced osteogenic responses via‘tailored assembly system’

引用

Bio-Design and Manufacturing 2022年第3期5卷 451-464页

作者： Hyun Lee min-Kyu Lee Ginam Han Hyoun-Ee Kim Juha Song Yuhyeon Na Chang-Bun Yoon SeKwon Oh Tae-sik Jang Hyun-Do jung Department of Biomedical-Chemical Engineering Catholic University of KoreaBucheon 14662Republic of Korea Department of Biotechnology The Catholic University of KoreaBucheon 14662Republic of Korea Department of Materials Science and Engineering Seoul National UniversitySeoul 08826Republic of Korea Querrey Simpson Institute for Bioelectronics Northwestern UniversityEvanstonIL 60208USA Biomedical Implant Convergence Research Center Advanced Institutes of Convergence TechnologySuwon 443-270Republic of Korea School of Chemical and Biomedical Engineering Nanyang Technological University70 Nanyang DriveSingapore 637457Singapore Department of Advanced Materials Engineering Korea Polytechnic UniversitySiheung-siGyeonggi-do 15073Republic of Korea Surface R&D Group Korea Institute of Industrial TechnologyIncheon 21999Republic of Korea Department of Materials Science and Engineering Chosun UniversityGwangju 61452Republic of Korea

Porous titanium(Ti)scaffolds have been extensively utilized as bone substitute scaffolds due to their superior biocompatibility and excellent mechanical ***,naturally formed TiO2 on the surface limits fast *** biomolecules have been widely utilized to overcome this issue;however,homogeneous porous Ti scaffolds could not simultaneously deliver multiple biomolecules that have different release *** this study,functionally graded porous Ti scaffolds(FGPTs)with dense inner and porous outer parts were fabricated using a two-body combination and densification *** with growth factor(BMP-2)and antibiotics(TCH)exhibited suitable mechanical properties as bone substituting material and presented good structural *** release of BMP-2 was considerably prolonged,whereas the release of TCH was comparable to that of homogenous porous titanium scaffolds(control group).The osteogenic differentiation obtained using FGPTs was maintained due to the prolonged release of *** antimicrobial properties of these scaffolds were verified using *** in terms of prior release *** addition,various candidates for graded porous Ti scaffolds with altered pore characteristics were presented.

关键词： Functionally graded porous titanium scaffold Tailored assembly system Mechanical tunability Multiplebiomolecule delivery Bone tissue engineering

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A combination strategy of functionalized polymer coating with Ta ion implantation for multifunctional and biodegradable vascular stents

引用

Journal of Magnesium and Alloys 2021年第6期9卷 2195-2207页

作者： Kwang-Hee Cheon Cheonil Park min-Ho Kang Suhyung Park Jinyoung Kim Seol-Ha Jeong Hyoun-Ee Kim Hyun-Do jung Tae-sik Jang Department of Materials Science and Engineering Seoul National UniversitySeoul 08826Republic of Korea Department of Chemical and Biological Engineering Seoul National UniversitySeoul 08826Republic of Korea Department of Biomedical-Chemical Engineering Catholic University of KoreaBucheon-si 03083Republic of Korea Department of Biotechnology The Catholic University of KoreaBucheon-si 14662Republic of Korea Department of Materials Science and Engineering Chosun UniversityGwangju 61452Republic of Korea

Biodegradable stents made of magnesium(Mg)and its alloys have been developed to minimize persistent inflammation or in-stent restenosis,which are the main problems for permanent ***,their rapid corrosion behavior under physiological conditions leads to poor vascular compatibility and premature structural failure,which remains an important unsolved clinical ***,we demonstrate a new strategy for solving this problem by combining poly(ether imide)(PEI)coating and subsequent tantalum(Ta)ion *** PEI coating covers the whole surface of the Mg stent uniformly via a spray coating technique and provides Mg with superior corrosion resistance and stable sirolimus-carrying *** ion implantation is conducted by a sputtering-based plasma immersion ion implantation technique only onto the luminal surface of the PEI-coated Mg *** extremely short processing time(<30 s)permits preservation of the PEI coating’s corrosion protection ability and sirolimus loading *** addition,a Ta-implanted skin layer that forms on the topmost surface of the PEI coating plays an effective role in not only preventing a rapid release of sirolimus from the surface but also improving the PEI coating’s surface *** on in vitro cellular response and blood compatibility tests,Ta ion implantation leads to the improvement of endothelial cell adhesion/proliferation and suppression of platelet adhesion/activation regardless of sirolimus *** results indicate that the combination of PEI coating and Ta ion implantation has significant innovative potential to provide excellent vascular compatibility and prevent in-stent restenosis and thrombosis.

关键词： Magnesium stent Biodegradability Tantalum Plasma immersion ion implantation Multifunctionality

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

CoolVox:Advanced 3D convolutional neural network models for predicting solar radiation on building facades

引用

Building Simulation 2022年第5期15卷 755-768页

作者： jung min Han Eun Seuk Choi Ali Malkawi Harvard University Graduate School of Design CambridgeUSA Harvard Center for Green Buildings and Cities CambridgeUSA Harvard John A.Paulson School of Engineering and Applied Sciences CambridgeUSA

Data-driven models have become increasingly prominent in the building,architecture,and construction *** area ideally suited to exploit this powerful new technology is building performance ***-based models have traditionally been used to estimate the energy flow,air movement,and heat balance of ***,physics-based models require many assumptions,significant computational power,and a considerable amount of time to output *** neural networks(ANNs)with prefabricated or simulated data are likely to be a more feasible option for environmental analysis conducted by designers during the early design *** ANNs require fewer inputs and shorter computation times and offer superior performance and potential for data augmentation,they have received increased attention for predicting the surface solar radiation on ***,ANNs can provide innovative and quick design solutions,enabling designers to receive instantaneous feedback on the effects of a proposed change to a building's *** research introduces deep learning methods as a means of simulating the annual radiation intensities and exposure level of buildings without the need for physics-based *** propose the CoolVox model to demonstrate the feasibility of using 3D convolutional neural networks to predict the surface radiation on building *** CoolVox model accurately predicted the radiation intensities of building facades under different boundary conditions and performed better than ARINet(with average mean square errors of 0.01 and 0.036,respectively)in predicting the radiation intensity both with(validation error=0.0165)and without(validation error=0.0066)the presence of boundary buildings.

关键词： artificial neural networks 3D convolutional neural networks solar radiation simulation building performance simulation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Direct modification of spermatogonial stem cells using lentivirus vectors in vivo leads to efficient generation of transgenic rats

引用

Asian Journal of Andrology 2019年第2期21卷 190-195页

作者： Bang-Jin Kim Yong-Hee Kim Myeong-Geun Oh Ki-jung Kim Sang-Eun jung Ju-Hee Jin Sun-Uk Kim Kwan-sik min Buom-Yong Ryu Department of Animal Scienee and Technology College of Biotechnology and Natural ResourcesChung-Ang UniversityAnseongGyeonggi-do 17546Korea National Primate Research Center Korea Research Institute of Bioscienee and BiotechnologyCheongjuChungcheongbuk-do 28116Korea Futuristic Animal Resource and Research Center Korea Research Institute of Bioscience and BiotechnologyCheongjuChungcheongbuk-do 28116Korea Animal Biotechnology Graduate School of Future Con verge nee Tech no logyDepartment of Animal Life ScienceInstitute of Genetic Engi neeringHankyong National UniversityAnseongGyeon ggi-do 17579Korea Department of Cancer Biology University of PennsylvaniaPhiladelphiaPA 19104USA.

Spermatogonial stem cells(SSCs)transmit genetic information to the next progeny in ***,SSCs are a potential target for germ I i ne modifications to gen erate tran sgenic an *** this study,we report a technique for the gen erati on of tran sgenic rats by in vivo manipulation of SSCs with a high success *** in juvenile rats were transduced in vivo with high titers of lentivirus harbori ng enhan ced green fluoresce nt protei n and mated with wild-type females to create foun der *** founder rats expressed the transgene and passed on the transgene with an overall success rate of 50.0%.Subsequent generations of progeny from the founder rats both expressed and passed on the ***,direct modification of SSCs in juvenile rats is an effective means of generating transgenic rats through the male *** technology could be adapted to larger animals,in which existing methods for gene modificatio n are in adequate or in applicable,resulti ng in the gen eration of tran sge nic an imals in a variety of species.

关键词： germline modification lentivirus spermatogonial stem cell testis transgenic animal

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Emission of particulate and gaseous pollutants from household laser processing machine

引用

Journal of Environmental Sciences 2021年第5期33卷 148-156页

作者： Hyun sik Ko Sang Bin Jeong Sooyeol Phyo Jiwon Lee Jae Hee jung Department of Mechanical Engineering Sejong UniversitySeoul 05006Republic of Korea Center for Environment Healthand Welfare ResearchKorea Institute of Science and Technology(KIST)Seoul 02792Republic of Korea Graduate School of Energy and Environment Korea UniversitySeoul 02841Republic of Korea Department o f Materials Science and Engineering Korea UniversitySeoul 02841Republic of Korea

Indoor air quality(IAQ) directly affects the health of occupants. Household manufacturing equipment(HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment(HLPE). Various target materials were tested using a commercial HLPE under various operating conditions of laser power and sheath air flow rate. The mode diameters of the emitted particles gradually decreased as laser power increased, while the particle number concentration(PNC) and particle emission rate(PER) increased. In addition, as the sheath air flow rate quadrupled from 10 to 40 L/min, the mode diameter of the emitted particles decreased by nearly 25%, but the effect on the PNC was insignificant. When the laser induced the target materials at 53 m W, the mode diameters of particles were 2.0 × 10^(4) particles/cm^(3). Particularly, analyses of sampled aerosols indicated that harmful substances such as sulfur and barium were present in particles emitted from leather. The carcinogenic gaseous pollutants such as acrylonitrile, acetaldehyde, 1,3-butadiene, benzene, and C 8 aromatics(ethylbenzene) were emitted from all target materials. In an actual indoor environment, the PNC of inhalable ultrafine particles(UFPs) was > 5 × 10^(4) particles/cm^(3) during 30 min of HLPE operation. Our results suggest that more meticulous control methods are needed, including the use of less harmful target materials along with filters or adsorbents that prevent emission of pollutants.

关键词： Indoor air quality(IAQ) Emission Laser processing Ultrafine particles(UFPs) Volatile organic compounds(VOCs)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of tantalum/poly(ether imide)coatings on magnesium implants with both corrosion protection and osseointegration properties

引用

Bioactive Materials 2021年第4期6卷 1189-1200页

作者： Kwang-Hee Cheon Cheonil Park min-Ho Kang In-Gu Kang min-Kyu Lee Hyun Lee Hyoun-Ee Kim Hyun-Do jung Tae-sik Jang Department of Materials Science and Engineering Seoul National UniversitySeoulRepublic of Korea Department of Biomedical-Chemical Engineering Catholic University of KoreaBucheonGyeonggi-doRepublic of Korea Institute of Health Science Research Korea UniversitySeoul02841Republic of Korea Department of Materials Science and Engineering Chosun UniversityGwangjuRepublic of Korea

Poly(ether imide)(PEI)has shown satisfactory corrosion protection capability with good adhesion strength as a coating for magnesium(Mg),a potential candidate of biodegradable orthopedic implant ***,its innate hydrophobic property causes insufficient osteoblast affinity and a lack of ***,we modify the physical and chemical properties of a PEI-coated Mg implant.A plasma immersion ion implantation technique is combined with direct current(DC)magnetron sputtering to introduce biologically compatible tantalum(Ta)onto the surface of the PEI *** PEI-coating layer is not damaged during this process owing to the extremely short processing time(30 s),retaining its high corrosion protection property and adhesion *** Ta-implanted layer(roughly 10-nm-thick)on the topmost PEI surface generates long-term surface hydrophilicity and favorable surface conditions for pre-osteoblasts to adhere,proliferate,and ***,in a rabbit femur study,the Ta/PEI-coated Mg implant demonstrates significantly enhanced bone tissue affinity and osseointegration *** results indicate that Ta/PEI-coated Mg is promising for achieving early mechanical fixation and long-term success in biodegradable orthopedic implant applications.

关键词： Magnesium Tantalum Poly(ether imide) Bio-functionalized coating Biodegradable orthopedic implants

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Global warming related carbon dioxide abatement proposals

引用

Journal of Environmental Sciences 1993年第3期5卷 269-278页

作者： jung sik Koh UN ESCAP Bangkok 10200 Thailand

The relationship between man-made CO2 emission and atmospheric CO2 concentration has been established. The factors that affect CO2 reduction allotment and the impacts on future energy demand and supply were discussed, in order to help energy policy makers both in developed countries and in developing countries for understanding the fundamental constraint on energy sector resulted from global warming related CO2 reduction, and hopefully in finding a common objective starting point to deal with global warming negotiation in energy sector, and to investigate the optimum stabilization goal and process acceptable to all sovereign countries that based on equity and applicability.

关键词： global wanning carbon dioxide abatement optimum CO2 stabilization.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of elastic-plastic properties of materials on residual indentation impressions in nano-indentation using sharp indenter

引用

中国有色金属学会会刊：英文版 2012年第S3期22卷 585-595页

作者： jung-min LEE Chan-Joo LEE Kyung-Hun LEE Byung-min KIM Dongnam Regional Division Korea Institute of Industrial Technology Precision Manufacturing Systems Division Pusan National University School of Mechanical Engineering Pusan National University

One of the primary features of nano-indentation technique is that the contact area induced by an indenter is indirectly measured by a relationship between the penetration depth and the known geometry of the ***,this indirect measurement occasionally leads to inaccurate properties of the indented *** objective of this study is to investigate the effects of E/σr and the strain hardening exponents n of materials on the behaviors of pile-up and sink-in in nano-indentation and to predict n values of materials from the residual indentation *** relations between the residual indentation profile and n value of the indented material were identified by dimensional ***,they were numerically formulated using FE analysis of nano-indentation for 140 different combinations of elastic-plastic parameters such as E,σy and *** parameters of hrp/hm,herp/hm,Rr/hm and HO&P/Hreal were introduced as various dimensionless parameters to represent and quantify the residual indentation profile after *** were subsequently characterized as dimensionless functions using n and E/σr ***,the validity of these functions was verified through 3D FE analysis of nano-indentation for Al 6061-T6 and AISI 1010 materials.

关键词： nano-indentation pile-up sink-in strain hardening exponent FE simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Deformation prediction of porcelain-enameled steels with strain history by press forming and high-temperature behavior of coating layer

引用

中国有色金属学会会刊：英文版 2012年第S3期22卷 838-844页

作者： Young-Ki SON Chan-Joo LEE jung-min LEE Byung-min KIM School of Mechanical Engineering Pusan National University Dongnam Regional Division Korea Institute of Industrial Technology

Porcelain enamel coatings were widely applied for the protection of steel products because they offered high corrosion protection,resistance to heat and abrasion,high hardness,hygiene and ease of *** typical process to produce enameled steels is roughly divided into two stages:the first stage consists of a forming process to give the desired shape to a steel substrate,and the second stage consists of a firing process to bond enamel frits on the *** firing process requires a high temperature above 800 °C,which may lead to austenitic transformation and severe thermal deformation of the steel *** aim of this study is to develop a finite element analysis (FE analysis) technique to predict the mechanical and thermal deformations of the enameled steels during forming and any further enameling process,including *** FE analysis involves analyzing the strain history of the steel substrate,which comprises the stress and thickness distributions of the substrate and its deformed shape,and the high-temperature behavior of the enamel coating *** validity of the FE analysis is verified through the U-bending test and firing test with various numbers and positions of enamel coating layers on the *** results reveal that the FE analysis results agree well with the experimental results with 8% error.

关键词： porcelain enamel firing process finite element analysis enameled steel thermal deformation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Intraductal papillary bile duct adenocarcinoma and gastrointestinal stromal tumor in a case of neurofibromatosis type 1

引用

World Journal of Gastroenterology 2018年第4期24卷 537-542页

作者： jung min Lee Jae min Lee Jong Jin Hyun Hyuk Soon Choi Eun Sun Kim Bora Keum Yoon Tae Jeen Hoon Jai Chun Hong sik Lee Chang Duck Kim Dong sik Kim Joo Young Kim Division of Gastroenterology and Hepatology Department of Internal Medicine Institute of Gastrointestinal Medical Instrument Research Korea University College of Medicine Division of Gastroenterology and Hepatology Department of Internal Medicine Korea University Anam Hospital Division of HBP Surgery and Liver Trans- plantation Department of Surgery Korea University College of Medicine Department of Pathology Korea University College of Medicine

We report our experience with a synchronous case of gastrointestinal stromal tumor(GIST) and intraductal papillary neoplasm of the bile duct(IPNB) in anelderly woman with neurofibromatosis type 1(NF-1). A 72-year-old woman presented with a 2-mo history of right upper abdominal pain unrelated to diet and indigestion. Fourteen years earlier, she had been diagnosed with NF-1, which manifested as café au lait spots and multiple nodules on the skin. Computed tomography(CT) revealed a multilocular low-density mass with septation, and mural nodules in the right hepatic lobe, as well as a 1.7-cm-sized well-demarcated enhancing mass in the third portion of the duodenum. The patient subsequently underwent right hepatectomy and duodenal wedge resection. We present here the first report of a case involving a synchronous IPNB and GIST in a patient with NF-1. Our findings demonstrate the possibility of various tumors in NF-1 patients and the importance of diagnosis at an early

关键词： Neurofibromatosis type 1 Intraductal papillary neoplasm of the bile duct Gastrointestinal stromal tumor Synchronous

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：