检索结果-南通市图书馆

MIS 5e sea surface temperature estimation;a multi-proxy approach using a marine macrofossil assemblage(Mar Piccolo,Gulf of Taranto,Southern Italy)

引用

Journal of Palaeogeography 2024年第2期13卷 327-350页

作者： Pierluigi Santagati Edoardo Perri maria Pia Bernasconi Mario Borrelli Salvatore Guerrieri Salvatore Critelli Dipartimento di Biologia Ecologia e Scienze della TerraUniversita della Calabriavia Pietro Bucci87036 Arcavacata di RendeCosenzaItaly Dipartimento di Ingegneria Ambientale Universita della Calabriavia Pietro Bucci87036 Arcavacata di RendeCosenzaItaly

It is reported a multi-proxy palaeoclimatic study conducted on a MIS 5e calcarenite from the Mar Piccolo Basin(MP),Gulf of Taranto(GT)(Central Mediterranean).The calcarenite returned a rich malacofauna consisting of 120 extant species,including four of the tropical Senegalese fauna,today absent in the *** biogeographic-climatic affinity of the assemblage shows,compared to today,a double percentage of warm affinity species,while the cold affinity species are nearly equally represented,indicating a warmer but not strictly tropical *** is confirmed by the most recurring preferred SST ranges of the assemblage,indicating an average of 20℃.The skeletal compositions of five well-preserved molluscan and coral specimens were analyzed for trace elements and stable isotopes for further mean SST *** the comparison of the results of several equations available in literature,it appears that only some SST estimations are realistic,converging into similar values of,on average,20.8±0.9℃.Considering all the used proxies,the MIS 5e SST difference compared to today falls in the range 1.2—2.0℃for the GT(being a more reasonable scenario)and 2.0—2.8℃for the *** is not a firmly tropical-like SST setting as suggested by the sole Senegalese fauna,indicating at least 2.7℃—3.5℃more than today’s GT and MP,*** approximations and assumptions made for obtaining SST values with any single proxy indicate the need of a multi-proxy approach to define the best SST estimation.

关键词： MiS 5e Sea surface temperature Palaeoclimate proxy fossil fauna Gulf of Taranto

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

device-measured physical activity and sedentary time in the Nordic countries:A scoping review of population-based studies

引用

Journal of Sport and Health Science 2024年第5期13卷 650-660页

作者： Ing-Mari Dohrn Jakob Tarp Jostein Steene-Johannessen Tommi Vasankari maria Hagströmer Division of Physiotherapy Department of NeurobiologyCare Sciences and SocietyKarolinska Institutet14183 HuddingeSweden department of Sports Medicine Norwegian School of Sports Sciences0806 OsloNorway UKK Institute for Health Promotion Research 33500 TampereFinland faculty of Medicine and Health Technology Tampere University33100 TampereFinland Academic Primary Health Care Centre Region Stockholm13365 StockholmSweden

Purpose:The purpose of this scoping review was to summarize and describe the methodology and results from population-based studies of physical activity and sedentary time measured with devices in the Nordic countries(denmark,finland,Iceland,Norway,and Sweden)and published in 2000 or ***:A systematic search was carried out in PubMed and Web of Science in June 2023 using predefined search ***:fourteen unique research projects or surveillance studies were ***,2 surveillance studies published by national agencies were included,resulting in a total of 16 studies for *** surveillance systems exist in finland and Norway,with regular survey waves in school-aged children/adolescents and *** denmark,recent nationally representative data have been collected in school children *** far,Sweden has no regular national surveillance system using device-based data *** studies were found from *** first study was conducted in 2001 and the most recent in 2022,with most data collected from 2016 to *** studies included children/adole scents 6-18 years,no study included *** total 11 studies included adults,of which 8 also covered older *** study focused specifically on older *** analytical sample size ranged from 205 to 27,*** methodology is presented,such as information on sampling strategy,device type and placement,wear protocols,and physical activity classification *** of physical activity and sedentary time in children/adolescents,adults,and older adults across the Nordic countries are ***:A growing implementation of device-based population surveillance of physical activity and sedentary behavior in the Nordic countries has been *** variety of devices,placement,and data procedures both within and between the Nordic countries highlights the challenges when it comes to comparing study outcomes as well as the need for more standa

关键词： Accelerometer Light intensity Moderate-vigorous intensity Surveillance Wearable devices

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

flow characteristics and bubble statistics during the fragmentation process of the ingested main cavity in plunging breaking waves

引用

Journal of Hydrodynamics 2024年第3期36卷 546-555页

作者： Wen-bin Zhang Wei-wen Zhao de-cheng Wan Computational Marine Hydrodynamics Lab(CMHL) School of Naval ArchitectureOcean and Civil EngineeringShanghai Jiao Tong UniversityShanghai200240China

Plunging breaking waves play an important role in the exchange of heat,momentum,and mass between the atmosphere and *** this paper,a series of direct numerical simulations is conducted to investigate the fragmentation process of the ingested main cavity in plunging breaking *** two-phase Navier-Stokes equations are solved using the finite-volume method based on adaptive refinement *** free surface is captured using a geometrical volume of fluid *** 2-D,3-D simulations are *** flow fields at different stages of wave breaking are presented and quantitative analysis for bubbles is *** 2-D instantaneous vorticity field and local velocity field are visualized to discuss the general flow characteristics during the fragmentation *** a 2-D parametric study is conducted to investigate the differences in the flow characteristics during the fragmentation process under different wave parameters including initial wave steepness(ε),Bond number(Bo),and Reynolds number(Re).3-D vortex structures are shown to further investigate the mechanisms behind the differences in the flow *** bubble size distributions under two different initial wave steepness are also discussed with their relationship to the fragmentation process of the ingested main *** research offers a significant understanding of the distinct procedures and fundamental dynamics involved in wave breaking,enhancing our comprehension of this intricate event.

关键词： Plunging breaking waves multiphase flow bubble statistics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Targeted nanopore sequencing for the identification of novel PRMT1 circRNAs unveils a diverse transcriptional profile of this gene in breast cancer cells

引用

Genes & Diseases 2024年第2期11卷 589-592页

作者： maria Papatsirou Andreas Scorilas Diamantis C.Sideris Christos K.Kontos department of Biochemistry and Molecular Biology National and Kapodistrian University of AthensPanepistimiopolisAthens GR 15701Greece

Long-read sequencing with nanopore technology has been widely utilized for the identification of the full-length sequence of RNA molecules."It is especially suitable for the identification of circular RNAs(circRNAs),which are regulatory molecules that are regarded as promising non-invasive biomarkers for various human malignancies,including breast cancer.2 The impact of circRNAs derived from the protein arginine methyltransferase 1(PRMT1)gene has not been clarified yet,even though the effect of PRMT1-mediated methylation on breast cancer cell characteristics has been well established.

关键词： PRMT1 breast cancer

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases

引用

Journal of Magnesium and Alloys 2024年第6期12卷 2298-2311页

作者： Camila Caroline de Castro AndréMartins Neves Benjamin Klusemann Helmholtz-Zentrum Hereon Institute of Material and Process DesignSolid-State Materials Processing21502 GeesthachtGermany Helmholtz-Zentrum Hereon Institute of Hydrogen TechnologySystem Design for Mobility21502 GeesthachtGermany Helmut Schmidt University/University of the German federal Armed forces Hamburg Department of Mechanical and Civil Engineering22043 HamburgGermany Leuphana University Lüneburg Institute for Production Technology and Systems21335 LüneburgGermany

Constrained friction Processing(CfP)is a novel solid-state processing technique suitable for lightweight materials,such Mg-and *** technique enables grain size refinement to fine or even ultrafine *** this study,the effect of CfP on the microstructural refinement of AM50 rods is investigated in terms of particle size and morphology of the eutectic and secondary phases originally present in the base material,in particular the eutecticβ-Mg_(17)Al_(12)and Al-Mn *** that purpose,as-cast and solution heat-treated base material and processed samples were *** Al_(8)Mn_(5) intermetallic phase was identified as the main secondary phase present in all samples before and after the processing.A notorious refinement of these particles was observed,starting from particles with an average equivalent length of a few micrometers to around 560 nm after the *** refinement of the secondary phase refinement is attributed to a mechanism analogous to the attrition comminution,where the combination of temperature increase and shearing of the material enables the continuous breaking of the brittle intermetallic particles into smaller *** for the eutectic phase,the results indicate the presence of the partially divorcedβ-Mg_(17)Al_(12)particles exclusively in the as-cast base material,indicating that no further phase transformations regarding the eutectic phase,such as dynamic precipitation,occurred after the *** the case of the processed as-cast material analyzed after the CfP,the thermal energy generated during the processing led to temperature values above the solvus limit of the eutectic phase,which associated with the mechanical breakage of the particles,enabled the complete dissolution of this ***,CfP was successfully demonstrated to promote an extensive microstructure refinement in multiple aspects,in terms of grain sizes of theα-Mg phase and presence and morphology of the Al-Mn and eutecticβ-Mg_(17)Al_(12).

关键词： Constrained friction processing AM50 Refill friction stir spot welding Extrusion β-Mg_(17)Al_(12) Al-Mn phases

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Correcting distortions of thin-walled machined parts by machine hammer peening

引用

Chinese Journal of Aeronautics 2024年第6期37卷 439-453页

作者： Aitor MADARIAGA Mikel CUESTA Gorka ORTIZ-de-ZARATE Eneko SAENZ-de-ARGANDONA denis SORIANO Michael B.PRIME Pedro Jose ARRAZOLA department of Materials University of ManchesterOxford RoadManchester M139PLUnited Kingdom Mechanical and Industrial Production department Faculty of EngineeringMondragon UnibertsitateaArrasate 20500Spain Los Alamos National Laboratory Los AlamosNew MexicoUSA

Thin-walled aerostructural components frequently get distorted after the machining *** to correct distortions or eventually rejecting parts significantly increases the *** paper proposes a new approach to correct distortions in thin-walled components by strategically applying hammer peening on target surfaces of a machined *** alloy 7475-T7351 was chosen for this *** study was divided in two ***,the residual stresses(RS)induced by four different pneumatic hammer peening conditions(modifying the stepover distance and initial offset)were characterised in a test coupon,and one of the conditions was selected for the next *** the second stage,a fEM model was used to predict distortions caused by machining in a representative ***,the RS induced by hammer peening were included in an fEM model to define two hammer peening strategies(varying the coverage area)to analyse the capability to reduce *** workpieces were machined and then treated with the simulated hammer peening strategies for experimental *** in the test coupon showed that pneumatic hammer peening can generate high compressive RS(-50 to350 MPa)up to 800 lm depth,with their magnitude increasing with a reduced stepover *** of hammer peening over 4% of the surface of the representative workpiece reduced the machininginduced distortions by 37%,and a coverage area of 100% led to and overcorrection by a factor of *** confirms that hammer peening can be strategically applied(in target areas and changing the percentage of coverage)to correct low or severe distortions.

关键词： Aeronautics Machining,Hammer Peening Aluminium alloy Distortions Residual Stress

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical analysis of coupled sloshing and motion of a cylindrical fPSO in regular waves

引用

Journal of Hydrodynamics 2024年第3期36卷 457-465页

作者： Wei-wen Zhao Xiao-long Yang de-cheng Wan Computational Marine Hydrodynamics Lab(CMHL) School of Naval ArchitectureOcean and Civil EngineeringShanghai Jiao Tong UniversityShanghai200240China Offshore Oil Engineering Co.Ltd. Tianjin300461China

In this paper,the coupled sloshing and motion characteristics of a cylindrical floating production storage offloading(CfPSO)are numerically investigated by means of computational fluid dynamics(CfD)*** simulations are performed using an in-house CfD solver naoe-fOAM-SJTU which is developed based on *** active wave generating-absorbing boundary condition(GABC)is utilized for wave generation and *** stabilized k-omega SST turbulence model are used to avoid excessive eddy viscosity near the free *** with and without partially filled liquid tanks in regular waves with different wave periods are simulated and vertical planar motions such as surge,heave and pitch response amplitude operators(RAOs)are *** due to liquid sloshing and wave loads are extracted and *** free surface motions inside liquid tanks in one wave period presented to explain the motion characteristics.

关键词： Coupled analysis liquid sloshing wave motion cylindrical floating production storage offloading(CfPSO)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A remote sensing approach to estimate the load bearing capacity of soil

引用

Information Processing in Agriculture 2024年第1期11卷 109-116页

作者： Italo Rômulo Mendes de Souza Edson Eyji Sano Renato Paiva de Lima Anderson Rodrigo da Silva Statistics and Geoprocessing Laboratory Instituto Federal GoianoGeraldo Silva Nascimento RoadKm 2.575790-000 UrutaíGoiásBrazil Embrapa Cerrados BR-020 RoadKm 18Mailbox 0822373310-970 PlanaltinaDFBrazil department of Soil Science ‘Luiz de Queiroz’College of AgricultureUniversity of São PauloAv.Pádua Dias235-AgronomiaPiracicabaSP 13418-900Brazil

Preconsolidation pressure(σp)of soil can be considered as an indicator of the Load Bearing Capacity(LBC),which is the tolerated surface pressure before compaction,often caused by the traffic of agricultural *** this pioneering study,a remote sensing approach was introduced to estimate LBC throughσp from soils of the“Rio Preto”Hydrographic Basin,Bahia State,Brazil,in a monthly time lapse from 2016 to ***,σp is measured by a laborious and time demanding laboratory analysis,making it unfeasible to map large *** innovative methodology of this work consists of combining active–passive satellite data on soil moisture and pedotransfer functions of clay content and water matric potential to obtain geo-located estimates ofσ*** were analysed under different classes of soil use,land cover and slope;95%confidence intervals were built for the time series of mean values of LBC for each *** overall seasonal variation in LBC estimates is similar in areas with annual crops,grasslands and natural vegetation,and flat areas are less affected by soil moisture variations over the year(between seasons).LBC decreased,in general,at about 0.5%a year in flat ***,these areas demand attention,since they occupy 86%of the Basin and are mostly subjected to agricultural soil management and surface pressure by heavy machinery.

关键词： Soil compaction SMAP Preconsolidation stress Brazilian Cerrado

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Adhesion performance of alkali-activated material for 3-dimensional printing of tunnel linings at different temperatures

引用

frontiers of Structural and Civil Engineering 2024年第1期18卷 66-79页

作者： Yaxin TAO Xiaodi DAI Geert de SCHUTTER Kim Van TITTELBOOM department of Structural Engineering and Building Materials Ghent UniversityGhent 9052Belgium

Robotic-based technologies such as automated spraying or extrusion-based 3-dimensional(3D)concrete printing can be used to build tunnel linings,aiming at reducing labor and mitigating the associated safety issues,especially in the high-geothermal ***-based 3D concrete printing(3DCP)has additional advantages over automated sprayings,such as improved surface quality and no ***,the effect of different temperatures on the adhesion performance of 3D-printed materials for tunnel linings has not been *** study developed several alkali-activated slag mixtures with different activator modulus ratios to avoid the excessive use of Portland cement and enhance sustainability of 3D printable *** thermal responses of the mixtures at different temperatures of 20 and 40℃ were *** adhesion strength of the alkali-activated material was evaluated for both early and later ***,the structural evolution of the material exposed to different temperatures was *** was followed by microstructure *** indicate that elevated temperatures accelerate material reactions,resulting in improved early-age adhesion ***,higher temperatures contribute to the development of a denser microstructure and enhanced mechanical strength in the hardened stage,particularly in mixtures with higher silicate content.

关键词： alkali-activated material 3DCP tunnel lining high-geothermal environment adhesion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Structure and 2p decay mechanism of^(18)Mg

引用

Nuclear Science and Techniques 2024年第6期35卷 145-154页

作者： Long Zhou de-Qing fang Si-Min Wang Hui Hua Key Laboratory of Nuclear Physics and Ion-beam Application(MOE) Institute of Modern PhysicsFudan UniversityShanghai 200433China Shanghai Research Center for Theoretical Nuclear Physics NSFC and Fudan UniversityShanghai 200438China School of Physics and State Key Laboratory of Nuclear Physics and Technology Peking UniversityBeijing 100871China

The recently discovered,extremely proton-rich nuclide 18 Mg exhibits ground-state decay via two sequential two-proton(2p)emissions through the intermediate nucleus,*** study investigates the structure and the initial 2p decay mechanism of^(18)Mgby examining the density and correlations of the valence protons using a three-body Gamow coupled-channel *** results show that the ground state of^(18)Mgis significantly influenced by the continuum,resulting in a significant s-wave ***,based on the current framework,this does not lead to a significant deviation in mirror symmetry in either the structure or spectroscopy of the 18Mg-18C ***,the time evolution analysis of the^(18)Mgground state suggests a simultaneous 2p emission during the first step of *** observed nucleon-nucleon correlations align with those of the light-mass 2p emitters,indicating a consistent decay behavior within this nuclear region.

关键词： Structure of^(18)Mg Two-proton decay Proton-proton correlation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：