检索结果-南通市图书馆

Beamspace maximum likelihood algorithm based on sum and difference beams for elevation estimation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Engineering and Electronics 2024年第3期35卷 589-598页

作者： chen sheng ZHAO Yongbo HU Yili PANG Xiaojiao National Laboratory of Radar Signal Processing Xidian UniversityXi’an 710071China

Beamspace super-resolution methods for elevation estimation in multipath environment has attracted significant attention, especially the beamspace maximum likelihood(BML)algorithm. However, the difference beam is rarely used in superresolution methods, especially in low elevation estimation. The target airspace information in the difference beam is different from the target airspace information in the sum beam. And the use of difference beams does not significantly increase the complexity of the system and algorithms. Thus, this paper applies the difference beam to the beamformer to improve the elevation estimation performance of BML algorithm. And the direction and number of beams can be adjusted according to the actual needs. The theoretical target elevation angle root means square error(RMSE) and the computational complexity of the proposed algorithms are analyzed. Finally, computer simulations and real data processing results demonstrate the effectiveness of the proposed algorithms.

关键词： elevation estimation beamspace multipath environment maximum likelihood

Construct a 3D microsphere of HMX/B/Al/PTFE to obtain the high energy and combustion reactivity

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第2期32卷 45-54页

作者： Jian Wang Jie chen Yaofeng mao Yongjun Deng Wei Cao Fude Nie Jun Wang Institute of Chemical Materials China Academy of Engineering PhysicsMianyang 621999PR China Shock and Vibration of Engineering Materials and Structures Key Lab of Sichuan Province Mianyang 621010PR China

Metal(aluminum and boron)based energetic materials have been wildly applied in various fields including aerospace,explosives and micro-devices due to their high energy ***,the low combustion efficiency and reactivity of metal fuels,especially boron(B),severely limit their practical ***,multi-component 3D microspheres of HMX/B/Al/PTFE(HBA)have been designed and successfully prepared by emulsion and solvent evaporation method to achieve superior energy and combustion *** reactivity and energy output of HBA are systematically measured by ignitionburning test,constant-volume explosion vessel system and bomb *** to the increased interfacial contact and reaction area,HBA shows higher flame propagation rate,faster pressurization rate and larger combustion heat of 29.95 cm/s,1077 kPa/s,and 6164.43 J/g,which is 1.5 times,3.5 times,and 1.03 times of the physical mixed counterpart(HBA-P).Meanwhile,HBA also shows enhanced energy output and reactivity than 3D microspheres of HMX/B/PTFE(HB)resulting from the high reactivity of *** reaction mechanism of 3D microspheres is comprehensively investigated through combustion emission spectral and thermal analysis(TG-DSC-MS).The superior reactivity and energy of HBA originate from the surface etching of fluorine to the inert shell(Al_(2)O_(3) and B_(2)O_(3))and the initiation effect of Al to *** work offers a promising approach to design and prepare high-performance energetic materials for the practical applications.

关键词： HMX/B/Al/PTFE 3D microspheres Surface etching Reaction mechanism

Nonlinear Impact Damage Evolution of Charpy Type and Analysis of Its Key Influencing Factors

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第1期37卷 254-264页

作者： Jianfeng mao Qian Xu Jiadong Yang Chi Cao Dasheng Wang Fengping Zhong Mingya chen Institute of Process Equipment and Control Engineering Zhejiang University of TechnologyHangzhou 310032China Taizhou Key Laboratory of Advanced Manufacturing Technology Taizhou InstituteZhejiang University of TechnologyTaizhou 318014China State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment Shenzhen 518172China Zhejiang Academy of Special Equipment Science Hangzhou 310020China Suzhou Nuclear Power Research Institute Suzhou 215004China

The current research of Charpy impact mainly focuses on obtaining the ductile brittle transition temperature of materials by *** with experiments,numerical simulation can study many problems with harsh ***,there are still few studies on the influence of geometric factors such as side *** this paper,the geometry of standard Charpy impact test is *** with different widths and side grooves are *** finite element model of Charpy impact was established by ABAQUS *** test results and simulation results to verify each *** effects of sample width,side groove depth and side groove bottom fillet on the impact fracture resistance of the sample were *** results show that the specimen width is positively correlated with the impact toughness of the *** side groove greatly reduces the impact toughness of the material;the toughness of side groove decreases with the increase of depth;the fracture toughness of side groove decreases with the increase of fillet at the bottom of side *** proportion of toughness energy to impact energy of samples was *** results show that the toughness energy accounts for about 70%of the impact energy of the sample,which has little to do with the geometric characteristics of the *** study presents a reliable method for studying Charpy impact *** influence of geometric parameters is obtained,which provides a reference method for the study of impact toughness of high toughness materials.

关键词： Johnson-Cook model Impact toughness Charpy impact

Effect of short-time low-temperature austenitizing on microstructure and mechanical properties of DT300 ultra-high strength steel fabricated by laser powder bed fusion

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1763-1777页

作者： chen-yang Jiang Xiao-qiang Li Jin-tao Wang Hao Luo sheng-qing Gao sheng-guan Qu Chao Yang National Engineering Research Centre of Near-Net-Shape Forming for Metallic Materials South China University of TechnologyGuangzhou 510640GuangdongChina Institute of New Materials Guangdong Academy of ScienceGuangzhou 510650GuangdongChina

To address the inhomogeneous microstructure and improve the mechanical properties of DT300 ultra-high strength steel specimens fabricated by laser powder bed fusion,different post-heat treatment schedules are *** the increase in austenitizing temperature and time,the migration rate of austenite grain boundaries continuously increases with the dissolution of nano-carbides,and the formation of nano-oxides and twin martensite is also inhibited *** rapid growth in the size of prior austenite grains and martensite laths,as well as the decrease in the content of nano-oxides and twin martensite,led to a rapid decrease in the strength(yield strength and ultimate tensile strength)from HT2 to HTF *** HT1 specimens(austenitizing at 830℃for 30 min,then oil quenching and tempering at 300℃for 120 min and finally air cooling)display excellent mechanical properties of yield strength of 1572 MPa,ultimate tensile strength of 1847 MPa,elongation of 9.84%,and fracture toughness of 106 MPa m^(1/2),which are counterparts to those of conventional DT300 steel forgings after heat treatment.

关键词： DT300 ultra-high strength steel Laser powder bed fusion-Short-time low-temperature austenitizing Microstructure Mechanical property

An analytical transient coal permeability model:Sorption non-equilibrium index-based swelling switch

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第4期16卷 1175-1191页

作者： Xingxing Liu Jishan Liu Liang chen Jinchang sheng Huimin Wang College of Civil and Transportation Engineering Hohai UniversityNanjing210098China School of Engineering The University of Western Australia35 Stirling HighwayCrawleyWA6009Australia College of Water Conservancy and Hydropower Engineering Hohai UniversityNanjing210098China

Long-term permeability experiments have indicated that sorption-induced swelling can switch from internal to bulk depending on the evolutive sorption ***,this sorption swelling switch mechanism has not been considered in current analytical permeability *** study introduces a normalized sorption non-equilibrium index(SNEI)to characterize the sorption status,quantify the dynamical variations of matrix swelling accumulation and internal swelling partition,and formulate the sorption swelling switch *** incorporation of this index into the extended total effective stress concept leads to an analytical transient coal permeability *** results show that the sorption swelling switch itself results in the permeability switch under stress-constrained conditions,while the confined bulk swelling suppresses the permeability recovery to the continuous reduction under displacement-constrained *** verifications show that current experimental observations correspond to the early stages of the transient process,and they could be extended to the whole process with these *** study demonstrates the importance of the sorption swelling switch in determining permeability evolution using simple boundary *** provides new insights into experimentally revealing the sorption swelling switch in the future,and underscores the requirement of a rigorous model for complex coupled processes in large-scale coal seams.

关键词： Coal permeability Sorption swelling switch Sorption non-equilibrium Boundary conditions

Isotropic sintering shrinkage of 3D glass-ceramic nanolattices:backbone preforming and mechanical enhancement

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第2期6卷 418-426页

作者： Nianyao Chai Yunfan Yue Xiangyu chen Zhongle Zeng sheng Li Xuewen Wang Center of Femtosecond Laser Manufacturing for Advanced Materials and Devices State Key Laboratory of Advanced Technology for Materials Synthesis and ProcessingWuhan University of TechnologyWuhan 430070People’s Republic of China National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies Foshan Xianhu LaboratoryFoshan 528000People’s Republic of China International School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070People’s Republic of China

There is a perpetual pursuit for free-form glasses and ceramics featuring outstanding mechanical properties as well as chemical and thermal *** is a promising idea to shape inorganic materials in three-dimensional(3D)forms to reduce their weight while maintaining high mechanical properties.A popular strategy for the preparation of 3D inorganic materials is to mold the organic–inorganic hybrid photoresists into 3D micro-and nano-structures and remove the organic components by subsequent ***,due to the discrete arrangement of inorganic components in the organic-inorganic hybrid photoresists,it remains a huge challenge to attain isotropic shrinkage during ***,we demonstrate the isotropic sintering shrinkage by forming the consecutive–Si–O–Si–O–Zr–O–inorganic backbone in photoresists and fabricating 3D glass–ceramic nanolattices with enhanced mechanical *** femtosecond(fs)laser is used in two-photon polymerization(TPP)to fabricate 3D green body *** subsequent sintering at 1000℃,high-quality 3D glass–ceramic microstructures can be obtained with perfectly intact and smooth ***-suit compression experiments and finite-element simulations reveal that octahedral-truss(oct-truss)lattices possess remarkable adeptness in bearing stress concentration and maintain the structural integrity to resist rod bending,indicating that this structure is a candidate for preparing lightweight and high stiffness glass–ceramic nanolattices.3D printing of such glasses and ceramics has significant implications in a number of industrial applications,including metamaterials,microelectromechanical systems,photonic crystals,and damage-tolerant lightweight materials.

关键词： 3D printing isotropic shrinkage femtosecond laser two-photon polymerization structural glass-ceramics

Experimental investigation on coal pore-fracture variation and fractal characteristics synergistically affected by solvents for improving clean gas extraction

在线全文

学校读者我要写书评

暂无评论

International Journal of Mining Science and Technology 2024年第3期34卷 413-425页

作者： Feilin Han sheng Xue Chunshan Zheng Zhongwei chen Guofu Li Bingyou Jiang Key Laboratory of Safe and Effective Coal Mining of Ministry of Education Anhui University of Science and TechnologyHuainan 232001China School of Safety Science and Engineering Anhui University of Science and TechnologyHuainan 232001China School of Mechanical and Mining Engineering University of QueenslandQLD 4072Australia State Key Laboratory of Coal and Coalbed Methane Co-Mining Jincheng 048012China

Chemical solvents instead of pure water being as hydraulic fracturing fluid could effectively increase permeability and improve clean methane extraction ***,pore-fracture variation features of lean coal synergistically affected by solvents have not been fully *** testing,nuclear magnetic resonance analysis,liquid phase mass spectrometry was adopted to comprehensively analyze pore-fracture change characteristics of lean coal treated by combined solvent(NMP and CS_(2)).Meanwhile,quantitative characterization of above changing properties was conducted using geometric fractal *** model between permeability,fractal dimension and porosity were *** indicate that the end face fractures of coal are well developed after CS2and combined solvent treatments,of which,end face box-counting fractal dimensions range from 1.1227 to *** decreases in ultrasonic longitudinal wave velocity of coal affected by NMP,CS_(2)and combined solvent are 2.700%,20.521%,22.454%,*** treatments could lead to increasing amount of both mesopores and *** ratio of fractal dimension Dsis 0.259%–2.159%,while permeability increases ratio of NMR ranges from 0.1904 to ***,combined solvent could dissolve coal polar and non-polar small molecules and expand flow *** could provide reference for solvent selection and parameter optimization of permeability-enhancement technology.

关键词： Clean gas extraction Chemical solvent Experimental investigation Fractal characteristics Pore fracture

Green manufacturing for achieving carbon neutrality goal requires innovative technologies:A bibliometric analysis from 1991 to 2022

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第6期140卷 255-269页

作者： sheng Zhang Xintian Wang Jiayu Xu Qinqin chen Meng Peng Jiming Hao School of Environment Tsinghua UniversityBeijing 100084China School of Environment&Natural Resources Renmin University of ChinaBeijing 100872China State Environmental Protection Key Laboratory of Sources and Control of Air Pollution Complex Beijing 100084China

Recent years have seen a significant increase in interest in green manufacturing as a key driver of global carbon-neutral efforts and sustainable *** find the research hotspots of green manufacturing and reveal future research trends,this study reviewed and analyzed research articles from the Web of Science database on green manufacturing from1991 to 2022 using a bibliometric *** findings indicate a significant rise in the number of articles related to green manufacturing since the ***,there has been an increase in the involvement of scholars from developing countries such as China and India in this *** on the literature review and bibliometric cluster analysis on green manufacturing,we believed that future research may continue following the lines of intelligent technology integration,adoption of frontier engineering techniques,and industry development in line with carbon reduction targets.A framework for future green manufacturing development is proposed,with a focus on Chinese *** framework could provide policy implications for developing countries looking to pursue opportunities for development in green manufacturing.

关键词： Green manufacturing Carbon neutrality Sustainable development Innovative technologies China

Copper-coated Porous Polyimide as Ultralight and Safe Current Collectors for Advanced LIBs

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第4期42卷 521-531页

作者： Cun-sheng Liu Jun-Qi Hu Ting-Ting mao Song-Yi Liao Ru-Ming Feng Yi-Dong Liu Yong-Gang Min School of Materials and Energy Guangdong University of TechnologyGuangzhou510006China College of Chemistry and Chemical Engineering Zhongkai University of Agriculture and EngineeringGuangzhou510225China Shanwei Branch of Advanced Energy Science and Technology Guangdong Laboratory Shanwei516600China

Metallic copper is widely used as current collector(CC) for graphite anode of lithium-ion batteries(LIBs) due to its high electrical conductivity and electrochemical stability. However, the large volume density of commercial copper foil(~8.9 g·cm^(-3)) limits the increase of energy density of battery. Here, copper-coated porous polyimide(Cu@PPI) was prepared by vacuum evaporation as collector for the graphite anode. The sandwich structure connects the copper metal on both sides of the collector with excellent electrical conductivity. Compared to commercial Cu foil, Cu@PPI has lighter mass(≤3.9 mg for disc of 12 mm diameter versus 9.9 mg of ~10 μm Cu foil) and lower volume density(≤3.3 g·cm^(-3)). In addition, the porous structure allows of better adhesion of reactive substances and electrochemical properties than pure Cu foils. It is estimated that the energy density of Cu@PPI should be much higher than that of Cu foil. This strategy should be applicable for other current collectors.

关键词： Copper-coated Vacuum evaporation Porous polyimide(PPI) Current collector(CC) LIBs