检索结果-南通市图书馆

Europium recovery process by means of polymeric nanoparticles functionalized with acrylic acid,curcumin and fumaramide

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

journal of rare Earths 2024年第10期42卷 1950-1959页

作者： P.A.martínez-montoya j.m del río A.de j.morales-ramirez m.Corea Escuela Superior de Ingeniería Química e Industrias Extractivas ESIQIE-IPNDepartamento de Ingeniería Metalúrgica UPALM S/N Col.LindavistaGustao A.MaderoCDMXC.P.07738Mexico Escuela Superior de Ingenieria Química e Industrias Extractivas ESIQIE-IPNLaboratorio de Investigación en Polímeros y NanomaterialesUPALM S/N Col.LindavistaGustavoA.MaderoCDMXC.P.07738Mexico Centra de Investigación e Innovación Tecnológica CIITEC-IPNCda.de CECATIs/nSanta CatarinaAzcapotzalcoC.P.02250CDMXMexico

Polymeric nanoparticles of poly(methyl methacrylate)were obtained by emulsion polymerization techniques in a proce ss of two *** particles were functionalized with acrylic acid,curcumin,and fumaramide and three series of polymeric particles were *** incorporation of functional groups was confirmed by Fourier transform-infrared spectrosocopy(FT-Ir)and ultraviolet-visible(UV-Vis)*** spherical morphology of particles with an average diameter of 100 nm was observed by scartning electron microscopy(SEm).The polymeric materials were used for recovery of[Eu]from synthetic *** nanoparticles show excellent chelation capacity to trap rare-earth ions,because they recover more than 85%of[Eu]at pH of *** images of SEm after extraction process show arrays between particles with larger average particle sizes to 1.5 *** addition,the particles have a good stripping capacity,exceeding 50%of it,maintaining their homogeneity in morphology and good stability in dispersion for the recovery and stripping processes.A pseudo-second model order is obtained for the extraction and stripping processes while the best results of stripping process are obtained at pH of 6.

关键词： [Eu]recovery Chelating effect Extraction process Stripping process Emulsion polymerization rare earths

Influence of the zigzag fins and inlet arrangements on the cooling proficiency of the mini-channel heat sink

在线全文

学校读者我要写书评

暂无评论

Propulsion and Power research 2024年第2期13卷 194-206页

作者： A.Torbatinezhad Y.Pahamli m.j.Hosseini r.Bahrampoury School of mechanical Engineering Babol University of TechnologyBabolIran Department of mechanical Engineering Semnan UniversitySemnanIran Department of mechanical Engineering Faculty of EngineeringGolestan UniversityGorganIran Department of mechanical Engineering K.N.Toosi University of TechnologyTehranIran

mini-channel heatsinks are one of the most effective thermal management methods for high heatﬂux devices due to the high performance of convective heat *** recent years,various techniques have been innovated to improve the thermal proﬁciency of the mini-channel *** of these are taking advantage ofﬁns’structural designs and ar-rangements of inlets and *** zigzagﬁns and channels were considered in the previous works in heatsinks,and researchers analyzed their cooling enhancement ***,in the present work,a combined cooling technique,considering new-type zigzagﬁns’geometrical parameters(arrangement,length,and height)causes turbulenceﬂow and higher convective heat transfer along with different positionings ofﬂow inlet and outlets resulting in superior temper-ature uniformity,is proposed to evaluate their impacts on the cooling proﬁciency of the heat sink versus different reynolds *** assess the thermal and hydraulic performance of the proposed heatsink,different parameters,including temperature contours,Nusselt numbers,thermal resistance,and entropy generation are *** a result,it is observed that in the case demonstrating the best thermal performance,the Nusselt number,pressure drop,thermal resistance,and entropy generation are respectively 37.13,4586.46 Pa,0.000078 m^(2)·K/W,and 0.1078 W/K in the best *** well,it is found that by changing the arrangements of inlets and outlets,the Nusselt number,and thermal resistance are improved by 12%and 13%,***,the proposed mini-channel heat sink could be used as a high-performance thermal management system for electronic devices in different industries,including energy,solar,and medical sectors.

关键词： Thermal management Heat transfer enhancement mini-channel heatsink Zigzagﬁn Entropy generation Electronic cooling

Structural effects induced by dialysis-based purification of carbon nanomaterials

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano materials Science 2024年第4期6卷 475-483页

作者： A.D.Veloso A.m.Ferraria A.m.Botelho do rego A.S.Viana A.j.S.Fernandes A.j.Fielding r.A.Videira m.C.Oliveira CQ-Vr and Chemistry Department University of Trás-os-Montes e Alto Douro BSIrG iBB-Institute for Bioengineering and BiosciencesDepartment of Chemical Engineeringand Associate Laboratory i4HB-Institute for Health and BioeconomyInstituto Superior TécnicoUniversidade de Lisboa Centro de Química Estrutural Institute of Molecular SciencesDepartamento de Química e BioquímicaFaculdade de CiênciasUniversidade de Lisboa I3N and Physics Department University of AveiroCampus de Santiago Faculty of Science Pharmacy and Biomolecular SchoolLiverpool John Moores University rEQUImTE/LAQV Laborat orio de FarmacognosiaDepartamento de QuímicaFaculdade de Farm aciaUniversidade do Porto

Dialysis plays a crucial role in the purification of nanomaterials but its impact on the structural properties of carbon nanomaterials was never ***,a carbon-based nanomaterial generated electrochemically in potassium phosphate buffer,was characterized before and after dialysis against pure *** is shown that dialysis affects the size of the carbon domains,structural organization,surface functionalization,oxidation degree of carbon,and grade of ***,dialysis drives the nanomaterial organization from discrete roundish carbon domains,with sizes ranging from 70 to 160 nm,towards linear stacking structures of small nanoparticles （m）.In parallel,alcohol and ether （epoxide） surface groups evolve into more oxidized carbon groups （e.g.,ketone and ester groups）.Investigation of the as-prepared nanomaterial by electron paramagnetic resonance （EPr） revealed a resonance signal consistent with carbon-oxygen centred ***,this study brings to light the selective affinity of the carbon nanomaterial under study to capture Na+ions,a property greatly enhanced by the dialysis process,and its high ability to trap oxygen,particularly before *** findings open new perspectives for the application of carbon-based nanomaterials and raise awareness of the importance of structural changes that can occur during the purification of carbon-based nanomaterials.

关键词： Nanocarbon Surface functionalization Nmr XPS Hydrophilic carbon Paramagnetic

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFArD m.j.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

Comparative analysis of microstructure,mechanical,and corrosion properties of biodegradable mg-3Y alloy prepared by selective laser melting and spark plasma sintering

在线全文

学校读者我要写书评

暂无评论

journal of magnesium and Alloys 2024年第4期12卷 1496-1510页

作者： P.minárik m.Zemková S.Šašek j.Dittrich m.Knapek F.Lukáˇc D.Koutný j.jaroš r.Král Faculty of mathematics and Physics Charles UniversityKe Karlovu 5Praha 12116Czech Republic research Centre University ofŽilinaUniverzitná8215/1Žilina 01026Slovakia Institute of Plasma Physics of the Czech Academy of Sciences Za Slovankou 1782/318200 Praha 8Czech Republic Institute of machine and Industrial Design Brno University of TechnologyTechnická2896/2Brno 61669Czech Republic

This work explored possibilities of biodegradable magnesium alloy mg-3Y preparation by two modern powder metallurgy techniques–spark plasma sintering(SPS)and selective laser melting(SLm).The powder material was consolidated by both methods utilising optimised parameters,which led to very low porosity(∼0.3%)in the SLm material and unmeasurably low porosity in the SPS *** main aim of the study was the thorough microstructure characterisation and interrelation between the microstructure and the functional properties,such as mechanical strength,deformability,and corrosion *** materials showed comparable strength of∼110 mPa in tension and compression and relatively good deformability of∼9%and∼21%for the SLm and SPS materials,*** corrosion resistance of the SPS material in 0.1 m NaCl solution was superior to the SLm one and comparable to the conventional extruded *** digital image correlation during loading and the cross-section analysis of the corrosion layers revealed that the residual porosity and large strained grains have the dominant negative effect on the functional properties of the SLm *** the other hand,one of the primary outcomes of this study is that the SPS consolidation method is very effective in the preparation of the W3 biodegradable alloy,resulting in material with convenient mechanical and degradation properties that might find practical applications.

关键词： magnesium Yttrium Powder metallurgy microstructure mechanical strength Corrosion resistance

Adaptation in brain structure and respiratory and olfactory structures across environmental gradients in African and North American muroid rodents

在线全文

学校读者我要写书评

暂无评论

Integrative Zoology 2024年第1期19卷 165-181页

作者： Peter j.TAYLOr Aluwani NENGOVHELA Christiane DENYS Graham r.SCOTT Catherine m.IVY Department of Zoology School of Natural and Mathematical SciencesUniversity of VendaThohoyandouSouth Africa Afromontane Unit Department of Zoology and EntomologyUniversity of the Free StatePhuthaditjhabaSouth Africa Department of mammalogy National MuseumBloemfonteinSouth Africa Institut de Systématique EvolutionBiodiversité(ISYEB)Muséum National d’Histoire NaturelleCNRSSorbonne UniversitéEPHEUniversitéDes AntillesParisFrance Department of Biology McMaster UniversityHamiltonOntarioCanada Guglielmo and Shoemaker Labs Advanced Facility for Avian ResearchUniversity of Western OntarioLondonOntarioCanada

morphometric studies of 3D micro CT-scanned images can provide insights into the evolution of the brain and sensory structures but such data are still scarce for the most diverse mammalian order of *** reviewed and new data,we tested for convergence to extreme aridity and high elevation in the sensory and brain morphology of rodents,from morphometric data from micro-CT X-ray scans of 174 crania of 16 species of three distantly re-lated African murid(soft-furred mice,Praomyini,laminate-toothed rats,Otomyini,and gerbils,Gerbillinae)clades and one North American cricetid(deer mice and white-footed mice,Peromyscus)*** studies demon-strated convergent evolution acting on the oval window area of the cochlea(enlarged in extremely arid-adapted species of Otomyini and Gerbillinae)and on endocranial volume(reduced in high elevation taxa of Otomyini and Peromyscus).However,contrary to our predictions,we did notfind evidence of convergence in brain struc-ture to aridity,or in the olfactory/respiratory system(turbinate bones)to high *** structure differed,particularly in the petrosal lobules of the cerebellum and the olfactory bulbs,between Otomyini and Gerbillinae,with extreme arid-adapted species in each clade being highly divergent(not convergent)from other species in the same *** observed greater“packing”of the maxillary turbinate bones,which have important respiratory functions,in Peromyscus mice from high and low elevations compared to the high-elevation African Praomyini,but more complex patterns within Peromyscus,probably related to trade-offs in respiratory physiology and heat exchange in the nasal epithelium associated with high-elevation adaptation.

关键词： 3D morphometrics Africa brain size North America rodentia sensory evolution

Generation of polarized electron beams through self-injection in the interaction of a laser with a pre-polarized plasma

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第3期12卷 62-68页

作者： L.r.Yin X.F.Li Y.j.Gu N.Cao Q.Kong m.Büscher S.m.Weng m.Chen Z.m.Sheng Key Laboratory of Nuclear Physics and Ion-beam Application(moE) Institute of Modern PhysicsDepartment of Nuclear Science and TechnologyFudan UniversityShanghaiChina State Key Laboratory of High Field Laser Physics Shanghai Institute of Optics and Fine MechanicsChinese Academy of SciencesShanghaiChina SANKEN(Institute of Scientific and Industrial research) Osaka UniversityOsakaJapan Sichuan research Institute Shanghai Jiao Tong UniversityChengduChina Peter Grünberg Institut(PGI-6) Forschungszentrum JülichJülichGermany Institut für Laser-und Plasmaphysik Heinrich-Heine-Universität DüsseldorfDüsseldorfGermany Key Laboratory for Laser Plasmas(moE) School of Physics and AstronomyShanghai Jiao Tong UniversityShanghaiChina Collaborative Innovation Center of IFSA Shanghai Jiao Tong UniversityShanghaiChina Tsung-Dao Lee Institute Shanghai Jiao Tong UniversityShanghaiChina

Polarized electron beam production via laser wakefield acceleration in pre-polarized plasma is investigated by particlein-cell *** evolution of the electron beam polarization is studied based on the Thomas±Bargmann±michel±Telegdi equation for the transverse and longitudinal self-injection,and the depolarization process is found to be influenced by the injection *** the case of transverse self-injection,as found typically in the bubble regime,the spin precession of the accelerated electrons is mainly influenced by the ***,in the case of longitudinal injection in the quasi-1D regime(for example,*** et al.,***.110,135002(2013)),the direction of electron spin oscillates in the laser *** the electrons move around the laser axis,the net influence of the laser field is nearly zero and the contribution of the wakefield can be ***,an ultra-short electron beam with polarization of 99%can be obtained using longitudinal self-injection.

关键词： laser wakefield acceleration longitudinal self-injection particle-in-cell simulation polarized electron beam

First-principles calculations to investigate structural,electronic,magnetic,optical and thermodynamic properties of rE_(2)rh_(3)Ge(rE=Pr,Sm)

在线全文

学校读者我要写书评

暂无评论

journal of rare Earths 2024年第7期42卷 1385-1393,I0007页

作者： A.Ezaier r.masrour m.Hamedoun j.Kharbach A.rezzouk A.Hourmatallah N.Benzakour K.Bouslykhane Laboratory of Solid Physics Faculty of Sciences Dhar El MehrazSidi Mohamed Ben Abdellah UniversityBP 1796FezMorocco Equipe de Physique du Solide LaboratoiresLIPIEcole Normale SupérieureBensoudaFèsMorocco

In this paper,we analyzed the physical characteristics of the ternary alloys rE_(2)rh_(3)Ge(rE=Pr and Sm)using the first principles calculation based on functional density theory integrated in the Wien2k *** calculated formation energies of Pr_(2)rh_(3)Ge and Sm_(2)rh_(3)Ge are−5.3827 and−5.2782 eV/atom,respectively,showing that these alloys may exist *** results of the band structure and density of states indicate that all of the compounds tested are magnetic metals,and their magnetism is mostly related to the contribution of Pr and Sm *** total magnetic moments of Pr_(2)rh_(3)Ge and Sm_(2)rh_(3)Ge are 4.07245 and 11.16161μB/f.u,*** parameters such as heat capacity at constant pressure,entropy,Debye temperature,lattice volume,compressibility coefficients,and Grüneisen parameter alloys were calculated using the Gibbs algorithm and studied in depth over a large temperature range of 0-900 *** Debye temperature increases with increasing pressure and decreases with decreasing ***,the Debye temperatures calculated at p=0 GPa and T=300 K are equal to be 342 and 322 K for Pr_(2)rh_(3)Ge and Sm_(2)rh_(3)Ge,*** optical characteristics such as the real and imaginary portions of the dielectric function,the absorption coefficient,the energy-loss function,and the refractive index were investigated and discussed in more depth.

关键词： magnetic metals Functional density theory Density of states magnetic moment Optical and thermodynamic properties rare earths

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPrAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing