检索结果-南通市图书馆

microstructure and mechanical Properties of Dissimilar Double-Side Friction Stir Welds Between medium-Thick 6061-T6 Aluminum and Pure Copper Plates

引用

Acta metallurgica Sinica(English Letters) 2022年第12期35卷 2027-2046页

作者： J.x.Tang L.Shi C.S.wu m.x.wu S.Gao mOE Key Lab for Liquid-Solid Structure Evolution and materials Processing Institute of Materials JoiningShandong UniversityJinan 250061China State Grid Henan Electric Power Research Institute Zhengzhou 450052China School of mechanical Engineering Qilu University of Technology(Shandong Academy of Sciences)Jinan250353China

It is difficult to achieve Al/Cu dissimilar welds with good mechanical properties for medium-thick plates due to the inherent high heat generation rate at the shoulder-workpiece contact interface in conventional friction stir ***,doubleside friction stir welding is innovatively applied to join 12-mm medium-thick 6061-T6 aluminum alloy and pure copper dissimilar plates,and the effect of welding speeds on the joint microstructure and mechanical properties of Al/Cu welds is systematically *** reveals that a sound Al/Cu joint without macroscopic defects can be achieved when the welding speed is lower than 180 mm/min,while a nonuniform relatively thick intermetallic compound(ImC)layer is formed at the Al/Cu interface,resulting in lots of local microcracks within the first-pass weld under the plunging force of the tool during friction stir welding of the second-pass,and seriously deteriorates the mechanical properties of the *** the increase of welding speed to more than 300 mm/min void defects appear in the joint,but the joint properties are still better than the welds performed at low welding speed conditions since a continuous uniform thin ImCs layer is formed at the Al/Cu *** maximum tensile strength and elongation of Al/Cu weld are,respectively,135.11 mPa and 6.06%,which is achieved at the welding speed of 400 mm/*** addition,due to the influence of welding distortion of the first-pass weld,the secondpass weld is more prone to form void defects than the first-pass weld when the same plunge depth is applied on both *** double-side friction stir welding is proved to be a good method for dissimilar welding of medium-thick Al/Cu plates.

关键词： Double-side friction stir welding medium-thick plate Dissimilar welding microstructures Intermetallic compounds mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Plasmonic tandem heterojunctions enable high-efficiency charge transfer for broad spectrum photocatalytic hydrogen production

引用

Journal of Energy Chemistry 2025年第1期100卷 710-720页

作者： Wenxuan Chen xiu-Qing Qiao Guo Hui Bojing Sun Dongfang Hou meidi Wang xueqian wu Tao wu Dong-Sheng Li College of materials and Chemical Engineering Key Laboratory of Inorganic Nonmetallic Crystalline and Energy Conversion Materials China Three Gorges University Hubei Three Gorges Laboratory College of Chemistry and materials Science and Guangdong Provincial Key Laboratory of Supramolecular Coordination Chemistry Jinan University

Rational engineering of semiconductor photocatalysts for efficient hydrogen production is of great significance but still challenging,primarily due to the limitations in charge transfer ***,a fascinating plasmonic tandem heterojunction with the hc-CdS/mo2C@C heterostructure is aimfully prepared for effectively promoting the charge separation kinetics of the CdS photocatalyst via the synergistic strategy of phase junction,Schottky junction,and photothermal *** difference in atomic configuration between cubic-CdS （c-CdS） and hexagonal-CdS （h-CdS） leads to effective charge separation through a typical Ⅱ charge transfer mechanism,and plasmonic Schottky junction further extracts the electrons in the hc-CdS phase junction to realize gradient charge ***,the photothermal effect of mo2C@C helps to expand the light absorption,accelerate charge transfer kinetics,and reduce the hydrogen evolution energy *** carbon layer provides a fast channel for charge transfer and protects the photocatalyst from *** a result,the optimized hc-CmC photocatalyst exhibits a significantly high photocatalytic H2production activity of 28.63 mmol/g/h and apparent quantum efficiency of 61.8%,surpassing most of the reported *** study provides a feasible strategy to enhance the charge transfer kinetics and photocatalytic activity of CdS by constructing plasmonic tandem heterogeneous junctions.

关键词： Heterojunctions LSPR Photocatalyst Phase junction Schottky junction Photothermal effect

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Ammonia pyrolysis oxidation excited by nanosecond pulsed discharge:Global/fluid models hybrid solution

引用

Journal of Energy Chemistry 2025年第1期100卷 385-396页

作者： mingming Zhang Hanyu wu Qi Chen Jiaxin Yang Bonan Liu School of mechanical Electronic and Control Engineering Beijing Jiaotong University China University of Petroleum

The kinetic characteristics of plasma-assisted oxidative pyrolysis of ammonia are studied by using the global/fluid models hybrid solution ***,the stable products of plasma-assisted oxidative pyrolysis of ammonia are *** results show that the consumption of NH3/O2and the production of N2/H2change linearly with the increase of voltage,which indicates the decoupling of nonequilibrium molecular excitation and oxidative pyrolysis of ammonia at low ***,the detailed reaction kinetics mechanism of ammonia oxidative pyrolysis stimulated by a nanosecond pulse voltage at low pressure and room temperature is *** on the reaction path analysis,the simplified mechanism is *** detailed and simplified mechanism simulation results are compared with experimental data to verify the accuracy of the simplified ***,based on the simplified mechanism,the fluid model of ammonia oxidative pyrolysis stimulated by the nanosecond pulse plasma is established to study the pre-sheath/sheath behavior and the resultant consumption and formation of key *** results show that the generation,development,and propagation of the pre-sheath have a great influence on the formation and consumption of *** consumption of NH3by the cathode pre-sheath is greater than that by the anode pre-sheath,but the opposite is true for OH and O（1S）.However,within the sheath,almost all reactions do not ***,by changing the parameters of nanosecond pulse power supply voltage,it is found that the electron number density,electron current density,and applied peak voltages are not the direct reasons for the structural changes of the sheath and ***,the discharge interval has little effect on the sheath structure and gas mixture *** research results of this paper not only help to understand the kinetic promotion of non-equilibrium excitation in the process of oxidative pyrolysis but also help to explore th

关键词： Nanosecond pulsed discharge Ammonia Oxidative pyrolysis Fluid model Global model

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Co-production of hydrogen, oxygen, and electricity via an integrated solar-driven system with decoupled water electrolyzer and Na-Zn ion battery

引用

Journal of Energy Chemistry 2025年第1期100卷 621-627页

作者： Fei Lv Longjie Liu Jiazhe wu Pengfei Wang Lixia Pan Dengwei Jing Yubin Chen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

Combining water electrolysis and rechargeable battery technologies into a single system holds great promise for the co-production of hydrogen （H2） and ***,the design and development of such systems is still in its ***,an integrated hydrogen-oxygen （O2）-electricity co-production system featuring a bipolar membrane-assisted decoupled electrolyzer and a Na-Zn ion battery was established with sodium nickelhexacyanoferrate （NaNiHCF） and Zn2+/Zn as dual redox *** decoupled electrolyzer enables to produce H2and O2in different time and space with almost 100%Faradaic efficiency at 100 mA ***,the charged NaNiHCF and Zn electrodes after the electrolysis processes formed a Na-Zn ion battery,which can generate electricity with an average cell voltage of 1.75 V at 10 m A *** connecting Si photovoltaics with the modular electrochemical device,a well-matched solar driven system was built to convert the intermittent solar energy into hydrogen and electric energy with a solar to hydrogen-electricity efficiency of 16.7%,demonstrating the flexible storage and conversion of renewables.

关键词： Hydrogen Electricity Decoupled water electrolyzer Na-Zn ion battery Solar energy

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of perforation on flow past a conic cylinder at Re =100: wavy vortex and sign laws

引用

Acta mechanica Sinica 2018年第5期34卷 812-829页

作者： L.m.Lin x.F.Zhong Y.x.wu Key Laboratory for mechanics in Fluid Solid Coupling Systems Institute of MechanicsChinese Academy of SciencesBeijing 100190China School of Engineering Sciences University of Chinese Academy of SciencesBeijing 100049China

In order to find the intrinsic physical mechanism of the original Kármán vortex wavily distorted across the span due to the introduction of three-dimensional (3-D) geometric disturbances,a flow past a peak-perforated conic shroud is numerically simulated at a Reynolds number of *** on previous work by meiburg and Lasheras (1988),the streamwise and vertical interactions with spanwise vortices are introduced and *** vortex-shedding patterns in the near wake for different flow regimes are reinspected and illustrated from the view of these two ***,in regime Ⅰ,spanwise vortices are a little distorted due to the weak *** in regime Ⅱ,spanwise vortices,even though curved obviously,are still shed synchronously with moderate streamwise and vertical *** in regime Ⅲ,violently wavy spanwise vortices in some vortex-shedding patterns,typically an Ω-type vortex,are mainly attributed to the strong vertical interactions,while other cases,such as multiple vortex-shedding patterns in sub-regime Ⅲ-D,are resulted from complex streamwise and vertical interactions.A special phenomenon,spacial distribution of streamwise and vertical components of vorticity with specific signs in the near wake,is analyzed based on two models of streamwise and vertical vortices in explaining physical reasons of top and bottom shear layers wavily varied across the *** these two models and above two interactions are *** two sign laws are summarized:the first sign law for streamwise and vertical components of vorticity is positive in the upper shear layer,but negative in the lower shear layer,while the second sign law for three vorticity components is always negative in the wake.

关键词： Vortex-shedding pattern Flow control Vortex dynamics Conic disturbance Perforation Sign law

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of perforation on flow past a conic cylinder at Re=100:vortex-shedding pattern and force history

引用

Acta mechanica Sinica 2018年第2期34卷 238-256页

作者： L.m.Lin x.F.Zhong Y.x.wu Key Laboratory for mechanics in Fluid Solid Coupling Systems Institute of Mechanics Chinese Academy of Sciences

The flow past a circular-section cylinder with a conic shroud perforated with four holes at the peak was simulated numerically at Re = 100, considering two factors, *** angle of attack and the diameter of the holes. The effects of the perforated conic shroud on the vortex shedding pattern in the near wake was mainly investigated, as well as the time history of the drag and lift forces. In the investigated parameter space, three flow regimes were generally identified, corresponding to weak, moderate, and strong disturbance *** regime I, the wake can mainly be described by alternately shedding Kármán or Kármán-like vortices. In regime II, the spanwise vortices are obviously disturbed along the span due to the appearance of additional vorticity components and their interactions with the spanwise vortices, but still shed in synchronization along the spanwise direction. In regime III,the typical Kármán vortices partially or totally disappear,and some new vortex shedding patterns appear, such as-type, obliquely shedding, and crossed spanwise vortices with opposite sign. Corresponding to these complex vortex shedding patterns in the near wake, the fluid forces no longer oscillate regularly at a single vortex shedding frequency, but rather with a lower modulation frequency and multiple amplitudes. An overview of these flow regimes is presented.

关键词： Vortex shedding pattern Fluid forces Flow control Conical shroud Perforation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Observation of acoustic hybrid topological phases induced by the p-d orbital interactions

引用

Science China(Physics,mechanics & Astronomy) 2025年第1期Mechanics & Astronomy) .卷 132-139页

作者： xiao xiang Feng Gao Yu-Gui Peng Peng wu Zong-Lin Li xue-Feng Zhu School of Physics and Innovation Institute Huazhong University of Science and Technology

In spinless systems,growing attention has recently been attracted to synthetic gauge fields,which redefine the fundamental crystal symmetries by utilizing the projective algebraic ***,synthetic gauge fields have been commonly investigated in single orbital systems,and explorations on hybrid orbitals remain elusive in ***,we report the experimental observation of hybrid topological phases induced by hybrid synthetic gauge flux,which is formed by the interaction between p and d orbitals embedded in acoustic *** breaking the translation symmetries of Lxand/or Ly,we unambiguously demonstrate the first-order m?bius edge states and higher-order corner *** work establishes a platform for seeking exotic topological phases induced by hybrid-orbitals interactions and initializing the framework of hybrid-orbitalsrelated topological *** applications can be anticipated in scenarios such as high-quality sensing and robust wave trapping due to the stepwise energy distribution of the hybrid topological phase.

关键词： topological insulator synthetic gauge field projective symmetry corner states

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Review of precipitation strengthening in ultrahigh-strength martensitic steel

引用

International Journal of minerals,metallurgy and materials 2025年第2期32卷 256-269页

作者： Zhihao Tian Chunlei Shang Chaolei Zhang xiaoye Zhou Honghui wu Shuize Wang Guilin wu Junheng Gao Jiaming Zhu xinping mao Institute for Carbon Neutrality University of Science and Technology BeijingBeijing 100083China Institute of Steel Sustainable Technology Liaoning Academy of MaterialsShenyang 110004China Department of materials Science and Engineering Shenzhen MSU-BIT UniversityShenzhen 518172China Institute of materials Intelligent Technology Liaoning Academy of MaterialsShenyang 110004China School of Civil Engineering Shandong UniversityJinan 250061China

martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic *** considerable research efforts devoted to this area,a systematic summary of these advancements is *** review focuses on the precipitates prevalent in ultrahigh-strength martensitic steel,primarily carbides(e.g.,mC,m_(2)C,and m_(3)C)and intermetallic compounds(e.g.,Ni Al,Ni_(3)x,and Fe_(2)mo).The precipitation-strengthening effect of these precipitates on ultrahigh-strength martensitic steel is discussed from the aspects of heat treatment processes,microstructure of precipitate-strengthened martensite matrix,and mechanical ***,a perspective on the development of precipitation-strengthened martensitic steel is presented to contribute to the advancement of ultrahigh-strength martensitic *** review highlights significant findings,ongoing challenges,and opportunities in the development of ultrahigh-strength martensitic steel.

关键词： ultrahigh-strength martensitic steel precipitation strengthening mechanical property carbide intermetallic compound

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Processing, microstructure and mechanical Properties of Ti6Al4V Particles-Reinforced mg matrix Composites

引用

Acta metallurgica Sinica(English Letters) 2016年第10期29卷 940-950页

作者： x.m.Wang x.J.Wang x.S.Hu K.wu m.Y.Zheng School of materials Science and Engineering Harbin Institute of Technology

Novel Ti6Al4V particles-reinforced AZ91 mg matrix composites were successfully fabricated by stir casting method. The stirring time in semisolid condition directly affected the particle distribution and the quality of the ingots. Furthermore, the optimal speed of the heating and the liquid stirring could overcome particle settlement caused by the density difference between the matrix and the particles. Ti6Al4V particles distributed uniformly in the composites with different particle contents. The average grain size decreased with the increase in the particle contents. The Ti6A14V particles bonded pretty well with the alloy matrix. In addition, there were some interfacial reactions in the composites. There were rod-like A13Ti phases at the interface. The precipitates extended from the particle surface to the matrix, and they might improve the interfacial bonding strength. The ultimate tensile strength, yield strength and elastic modulus were enhanced as the particle contents increased, and the elongation was much better than that of the same matrix material reinforced with SiC particles. Thus, the novel composites exhibit better comprehensive mechanical properties.

关键词： magnesium matrix composites Ti6Al4V particles Stir casting microstructure mechanicalproperties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A new model for the expansion tube considering the stress coupling:Theory,experiments and simulations

引用

Defence Technology（防务技术） 2022年第7期18卷 1190-1204页

作者： m.Z.wu x.W.Zhang Q.m.Zhang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyHaidian DistrictBeijing10081China

Based on the two-arc profile assumption,the expansion deformation and energy absorption of circular tubes compressed by conical-cylindrical dies were ***,the deformation of the two arcs was analyzed independently and an improved model denoted as model-I was ***,by further involving the coupling between the bending moment and membrane forces,a more elaborate model,i.e.,model-II was ***,experiments and simulations were conducted to verify the models,which show that,compared with previous theoretical models,model-II could not only capture the prominent features of the deformation,but also improve the prediction accuracy of the steady driving force *** means of this model,it was found that the critical semi-conical angle,which makes the driving force minimum,increases with the increase of the friction coefficient,expansion ratio as well as the radius/thickness ratio of the ***,the energy dissipation due to stretching is always greater than that of bending,while the friction dissipation can account for the largest proportion at small semi-conical angle or large friction *** a certain friction and die conditions,the specific energy absorption of expanded tubes can be much higher than that under progressive collapse mode.

关键词： Expansion Circular tube Stress coupling Strain hardening Energy absorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：