检索结果-南通市图书馆

Solid-liquid extraction for yttrium recovery using porous polymeric resin（XAD-7） functionalized with D2EHPA

Journal of Rare Earths 2024年第9期42卷 1764-1773页

作者： P.A.martínez-montoya R.G.Sanchez-Alvarado D.Y.medina-Velazquez m.l.carrera-jota P.Garnica-Chávez A.de J.morales-Ramirez Higher School of Chemical Engineering and Extractive Industries ESIQIEIPNDepartment of Metallurgical Engineering metropolitan Autonomous University Department of MaterialsBasic Sciences and Engineering Center for Research and Technological Innovation CIITECIPN

The recovery of yttrium is proposed by applying a solid-liquid extraction process using di-2-ethyl hexylphosphoric acid（D2EHPA） as extracting *** extracting agents were supported on a macro porous polymeric resin XAD-7（solid phase）.Yttrium ions extraction and discharge tests were performed,firstly from a synthetic aqueous solution of 100 mg/l Y（liquid phase） at 25℃ with *** effects of pH of aqueous solutions bearing yttrium,volume fraction of extracting agents and the solid/liquid（S/l）ratio on the yttrium recovery were *** most favorable conditions for yttrium ions extraction are;20 vol% D2EHPA functionalized resin,pH=1.5 and an S/l ratio of 10 mg/ml The discharge of yttrium ions was done under the same conditions of extraction stage,using a 2 mol/l [H2SO4] as stripping *** to 80% yttrium is extracted,while 75% yttrium is recovered in the striping *** all experiments,the reaction equilibrium is reached after 20 min,and the kinetics for the extraction stage was determined as a second-order ***,experiments were carried out to discharge the yttriumloaded resins,and it has been determined that the best pH value to strip the Y ions is *** tests of extraction and discharge for yttrium ions show that the functionalized resin can work at least five cycles without decreasing its ***,the proposed process was tested in a real solution with Y ions fro m a waste fluorescent la mp powder leached in H2SO4,demonstrating the ability to effectively recover yttrium,separating it from various metals from the studied residue.

关键词： Fluorescent lamps recycling Rare earth solid-liquid extraction Solid-liquid kinetics extraction XAD-7 resin Yttrium recovery

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

出平面剪切波作用下弹性非均匀材料中圆孔受刚度影响的力学分析

引用

Acta mechanica Sinica 2024年第4期40卷 226-237页

作者：卞金来杨在林 Erasmo carrera College of Aerospace and Civil Engineering Harbin Engineering UniversityHarbin150001China Key laboratory of Advanced material of Ship and mechanics Ministry of Industry and Information TechnologyHarbin Engineering UniversityHarbin150001China Department of mechanical and Aerospace Engineering Politecnico di TorinoTurinItaly

基于复变函数理论,研究了出平面剪切波在非均匀直角域内的传播特性.介质的非均匀性体现在剪切模量是与空间坐标有关的函数.引入一个位移辅助函数和一对映射函数用以辅助推导控制方程.同时,在复坐标系下可以更方便的进行坐标变换.使用镜... 详细信息

基于复变函数理论,研究了出平面剪切波在非均匀直角域内的传播特性.介质的非均匀性体现在剪切模量是与空间坐标有关的函数.引入一个位移辅助函数和一对映射函数用以辅助推导控制方程.同时,在复坐标系下可以更方便的进行坐标变换.使用镜像法构造了介质内反射波和散射波的波场表达式.根据圆孔处的边界条件求解了散射波中的未知系数,并给出了直角域空间内波场的解析表达式.在动力学分析中,刚度可以用剪切模量来表示.在算例分析中,讨论了位移幅值和动应力集中系数对非均匀参数,参考波数以及圆孔位置的依赖关系.

关键词：动应力集中系数复变函数理论散射波辅助函数圆孔剪切模量映射函数镜像法

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of cold-working on corrosion induced damage in lug joints

引用

Defence Technology（防务技术） 2024年第6期36卷 175-182页

作者： Ramanath m.N Chikmath l. murthy H. Department of Aerospace Engineering Indian Institute of Technology-MadrasChennai 600036India Department of Aeronautical Engineering KLS Gogte Institute of TechnologyBelagavi 590008India

lug joints are preferred joineries for transferring heavy loads to parent components in aerospace *** experience corrosion due to environmental conditions,improper surface finishes and rubbing displacement between the pin and *** causes damage of different sizes and shapes near the *** degradation due to corrosion-induced damage is modelled as a through-pit at one of the identified critical locations through stress *** effect of this pit on fatigue crack initiation life is ***-hole is pre-stressed by cold-working and the benefits of inducing plastic wake on the intended performance of the lug joint during the damages due to corrosion are brought out and compared with non-cold-worked *** analysis is performed on this lug joint with *** results obtained highlight the benefits of cold-working and the methodology can be extended to damage growth and analyse the effect of surface treatments for better structural integrity of components of aerospace vehicles.

关键词： lug joint Corrosion Crack initiation Cold-working Structural integrity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

On calculating glacial isostatic adjustment

引用

Geodesy and Geodynamics 2024年第5期15卷 441-452页

作者： l.m.Cathles Cornell University

modeling the earth's fluid and elastic response to the melting of the glaciers of the last ice age is the most direct way to infer the earth's radial viscosity profile. Here, we compare two methods for calculating the viscoelastic response to surface loading. In one, the elastic equation of motion is converted to a viscoelastic equation using the Correspondence Principle. In the other, elastic deformation is added to the viscous flow as isostatic adjustment proceeds. The two modeling methods predict adjustment histories that are different enough to potentially impact the interpretation of the observed glacial isostatic adjustment(GIA). The differences arise from buoyancy and whether fluid displacements are subjected to hydrostatic pre-stress. The methods agree if they use the same equations and boundary conditions. The origin of the differences is determined by varying the boundary conditions and pre-stress application.

关键词： Correspondence principle Elastic buoyancy Glacial isostatic adjustment Hydrostatic pre-stress Viscoelastic normal modes

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Effect of radiative loss mechanisms on FIR thermometric parameters of Nd^(3+)-doped lithium tellurite glasses

引用

Journal of Rare Earths 2024年第7期42卷 1250-1257,I0002页

作者： C.Y.morassuti A.P.l Silva l.A.O.Nunes S.m.lima l.H.C.Andrade Optical and Photothermal Spectroscopy Group(GEOF) Center for Studies in Natural Resources(CERNA)State University of Mato Grosso do Sul(UEMS)C.P.351DouradosMSBrazil Renato Archer Information Technology Center Dom Pedro I Highway(SP-65)Km 1436-Chácaras Campos dos AmaraisCampinasSPBrazil Institute of Physics of São Carlos University of São PauloSão CarlosSPBrazil

Nd^(3+)-doped tellurite glasses are promising materials for thermometers based on the fluorescence intensity ratio(FIR)***,at high Nd^(3+)concentrations,energy transfer(ET)processes such as optical reabsorption and cross-relaxation can affect the Nd^(3+)emission,which has been little explored in the ***,the present work investigated the use of Nd^(3+)-doped tellurite glass(samples doped with Nd^(3+)at 0.2 mol%,0.5 mol%,2.0 mol%,and 4.0 mol%)in fluorescence thermometers,in the temperature range from 299 to 371 *** results indicate a strong dependence of the FIR parameters on the Nd^(3+)concentration,due to changes in the emission band profiles caused by optical reabsorption of the Nd^(3+)emissions and cross-relaxation processes.A decrease of the relative sensitivity of the ratio^(4)F_(5/2)→^(4)I_(9/2)/^(4)F_(3/2)→^(4)I_(9/2)is observed for samples doped with higher amounts of Nd^(3+).The maximum relative sensitivity at 299 K is 3.00%/K,which is the highest value among the reported Nd^(3+)ions.

关键词： Nd^(3+)-doped tellurite glass Fluorescence intensity ratio Optical thermometry Judd-Ofelt Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A comprehensive review on the processing-property relationships of laser strengthened magnesium

引用

Journal of magnesium and Alloys 2024年第1期12卷 1-34页

作者： Alessandro m.Ralls Aaksheta Agnel Pradeep l.menezes Department of mechanical Engineering University of Nevada RenoRenoNV 89557United States

Among the existing series of softer metals,magnesium(mg)has attracted much attention due to its impressive strength-to-weight ***,due to its ease of deformability,mg tends to suffer from rapid degradation in a wide variety of abrasive and electrochemical *** method of improving its surface properties is through surface modification *** the existing techniques,laser shock peening(lSP)has been one of the most widely utilized processes due to its surface-hardening-like *** this understanding,a comprehensive review has yet to exist that encapsulates the strengthening mechanism of lSP for mg and its influence in degradation *** review aims to encapsulate the existing research around the lSP field for ***,an understanding of the surface-strengthening effects in relation to its mechanical,tribological,corrosion,and tribo-corrosion characteristics is ***,the feasibility of lSP for mg materials in critical industries is also *** this work,a novel understanding of lSP for mg can be understood,which can provide a future direction for research in this field.

关键词： laser shock peening magnesium Surface deformation Tribology microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Spark Plasma Sintering of mg-based Alloys:microstructure,mechanical Properties,Corrosion Behavior,and Tribological Performance

引用

Journal of magnesium and Alloys 2024年第2期12卷 405-442页

作者： Alessandro m.Ralls mohammadreza Daroonparvar Pradeep l.menezes Department of mechanical Engineering University of Nevada RenoRenoNV89557United States

Within the past ten years,spark plasma sintering(SPS)has become an increasingly popular process for mg *** the SPS process,interparticle diffusion of compressed particles is rapidly achieved due to the concept of Joule *** to traditional and additive manufacturing(Am)techniques,SPS gives unique control of the structural and microstructural features of mg *** doing so,their mechanical,tribological,and corrosion properties can be *** great advancements in this field have been made,these pieces of knowledge are scattered and have not been contextualized into a single *** motivation of this work is to address this scientific gap and to provide a groundwork for understanding the basics of SPS manufacturing for *** do so,the existing body of SPS mg literature was first surveyed,with a focus on their structural formation and degradation *** was found that successful mg SPS fabrication highly depended on the processing temperature,particle size,and particle *** addition of metal and ceramic composites also affected their microstructural features due to the Zener pinning *** degradative environments,their performance depends on their structural features and whether they have secondary phased *** industrial applications,SPS'd mg was found to have great potential in biomedical,hydrogen storage,battery,automotive,and recycling *** prospects to advance the field include using mg as a doping agent for crystallite size refinement and using bulk metallic mg-based glass powders for amorphous SPS *** these findings,the interactions of multi-composites on the processing-structure-property relationships of SPS mg is not well *** total,this work will provide a useful direction in the SPS field and serve as a milestone for future mg-based SPS manufacturing.

关键词： Spark plasma sintering magnesium alloys Nanocrystalline Tribology mechanical properties Corrosion

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A seed and soil model of loneliness in Alzheimer's disease

引用

Neural Regeneration Research 2024年第12期19卷 2575-2576页

作者： Hannah l.Apostolou Ian m.mcDonough Department of Psychology The University of AlabamaTuscaloosaALUSA Department of Psychology Binghamton UniversityBinghamtonNYUSA

loneliness is classically defined as a result of perceiving a discrepancy between the desired quantity and quality of one's social life and actual social relationships(Perlman and Peplau,1984).lifespan research has indicated older adults are among the highest risk for experiencing loneliness because their social network size decreases more frequently than that of younger adults.

关键词： Alzheimer younger soil

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Corrosion testing of X52 and X80 steels immersed in stimulated emulsions using a real petroleum sample

引用

Petroleum Research 2024年第2期9卷 304-316页

作者： l.m.Quej-Ake J.l.Alamilla A.Contreras Instituto mexicano del Petróleo Eje Central Lázaro CárdenasNorte 152San Bartolo AtepehuacanGustavo A.MaderoCiudad de MéxicoC.P.07730México

The aim of this study is to evaluate the internal corrosion process on X52 and X80 steels/real petroleum interfaces containing condensed hydrocarbon plus oilfield-produced water,which were subjected to stimulated emulsions using 50/50 vol ratio mixtures at 45℃,different hydrodynamic conditions,1 h,and 24 h.A washing process by using deionized water was proposed to simulate and identify the corrosiveness of the hydrocarbon phase after 24 h of exposure *** characterization by electrochemical impedance spectroscopy and the monitoring of the polarization curves indicated that X80 steel/oilfield-produced water interfaces were more susceptible to corrosion than X52 steel exposed to oilfield-produced *** combined speed rotation of 600 rpm using a magnetic stirrer+600 rpm using a rotating disk electrode decreased the corrosion rate on X52 *** stimulated emulsions made of hydrocarbon+oilfield-produced water and hydrocarbon+deionized water at 24 h increased the corrosion rate on X80 steel(0.34 mm/year and 0.43 mm/year,respectively),promoting the formation of erosion and pitting *** types of corrosion depended mainly on the physicochemical properties of the hydrocarbon,oilfield-produced water,exposure times,and hydrodynamic systems in which the hydrocarbon was studied.

关键词： Corrosion Emulsions X52 steel X80 steel

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Semi-analytical investigation of heat transfer in a porous convective radiative moving longitudinal fin exposed to magnetic field in the presence of a shape-dependent trihybrid nanofluid

引用

Applied mathematics and mechanics(English Edition) 2024年第1期45卷 197-216页

作者： C.G.PAVITHRA B.J.GIREESHA m.l.KEERTHI Department of PG Studies and Research in mathematics Kuvempu UniversityShankaraghatta 577451India Department of mathematics and Statistics M.S.Ramaiah University of Applied SciencesBengaluru 560058India

The thermal examination of a non-integer-ordered mobile fin with a magnetism in the presence of a trihybrid nanofluid(Fe_3O_4-Au-Zn-blood) is carried out. Three types of nanoparticles, each having a different shape, are considered. These shapes include spherical(Fe_3O_4), cylindrical(Au), and platelet(Zn) configurations. The combination approach is utilized to evaluate the physical and thermal characteristics of the trihybrid and hybrid nanofluids, excluding the thermal conductivity and dynamic viscosity. These two properties are inferred by means of the interpolation method based on the volume fraction of nanoparticles. The governing equation is transformed into a dimensionless form, and the Adomian decomposition Sumudu transform method(ADSTm) is adopted to solve the conundrum of a moving fin immersed in a trihybrid nanofluid. The obtained results agree well with those numerical simulation results, indicating that this research is reliable. The influence of diverse factors on the thermal overview for varying noninteger values of γ is analyzed and presented in graphical representations. Furthermore, the fluctuations in the heat transfer concerning the pertinent parameters are studied. The results show that the heat flux in the presence of the combination of spherical, cylindrical, and platelet nanoparticles is higher than that in the presence of the combination of only spherical and cylindrical nanoparticles. The temperature at the fin tip increases by 0.705 759% when the value of the Peclet number increases by 400%, while decreases by 11.825 13% when the value of the Hartman number increases by 400%.

关键词： convection radiation moving longitudinal fin Adomian decomposition Sumudu transform method(ADSTm) trihybrid nanofluid magnetic field

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：