检索结果-南通市图书馆

Occurrence and vertical distribution of aluminum and rare earths in weathered crust elution-deposited rare earth ore:Effect of soil solution pH and clay minerals

引用

Journal of Rare Earths 2024年第7期42卷 1394-1402,I0007页

作者： Jiaxin Pan Longsheng Zhao Zheng Li Xiaowei Huang Zongyu feng Jun Chen National Engineering Research Center for Rare Earth China GRINM Group Co.Ltd.Beijing100088China School of metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing100083China GRIREm Hi–Tech Co. Ltd.Langfang065201China GRIREm Advanced materials Co. Ltd.Beijing100088China GRImAT Engineering Institute Co. Ltd.Beijing101407China

Weathered crust elution-deposited rare earth ore is crucial source of medium and heavy rare earths,with in-situ leaching being the most common mining *** high contents of impurity of aluminum in the leach solution are a significant challenge for the subsequent enrichment process of rare earths.A comprehensive understanding of the occurrences and vertical distribution of aluminum and rare earths within typical vertical profiles can provide valuable insights into entire design of the in-situ *** paper improves a five-step sequential extraction method to analyze the occurrence and vertical distribution of rare earths and aluminum in vertical profiles from Chongzuo and *** results demonstrate that soil solution pH is the main factor affecting the vertical distribution of ionexchangeable rare *** samples have distinct areas of enrichment for ion-exchangeable rare earths or ***-exchangeable rare earths are primary concentrated in the middle and lower parts of the ore layer(4-13 m in Chongzuo,14-22 m in Longyan),while the ion-exchangeable aluminum is mainly enriched in the upper part of the ore layer(1-5 m in Chongzuo,and 2-14 m in Longyan).The vertical distribution of inorganic hydroxy aluminum is likely influenced by the micromorphology and particle size of the clay *** inorganic hydroxy aluminum concentration in Chongzuo samples decreases continuously from 415.65 to 120.95 mg/kg with increasing sampling depth,whereas the concentration in Longyan samples(110.55-171.27 mg/kg)is almost independence with sampling *** results provide direct guidance for the entire design of the injection well depth and the leaching parameters,thereby inhibiting the leaching of impurity of aluminum and lower the consumption of leaching agent.

关键词： Weathered crust elution-deposited rare earth ore Sequential extraction Occurrence Aluminum Rare earth elements

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Tailoring NH_(4)^(+)storage by regulating oxygen defect in ammonium vanadate

引用

Green Energy & Environment 2024年第7期9卷 1171-1182页

作者： Yanyan Liu Ziyi feng Hanmei Jiang Xueying Dong Changgong meng Yifu Zhang State Key Laboratory of Fine Chemicals School of Chemical EngineeringDalian University of TechnologyDalian116024China College of Environmental and Chemical Engineering Dalian UniversityDalian116622China

Defect engineering is an effective strategy for modifying the energy storage materials to improve their electrochemical ***,the impact of oxygen defect and its content on the electrochemical performances in the burgeoning aqueous NH_(4)^(+)storage field remains ***,for the first time in this work,an oxygen-defective ammonium vanadate[(NH_(4))_(2)V_(10)O_(25)·8H_(2)O,denoted as Od-NHVO]with a novel 3D porous flower-like architecture was achieved via the reduction of thiourea in a mild reaction condition,which is a facile method that can realize the intention to regulate the oxygen defect content,with the capability of *** as-prepared Od_m-NHVO with moderate oxygen defect content can deliver a stable specific capacitance output(505 F g^(-1),252 mAh g^(-1)at 0.5 A g^(-1)with~80% capacitance retention after 10,000 cycles),which benefits from extra active sites,unimpeded NH_(4)^(+)-migration path and relatively high structure *** contrast,low oxygen defect content will lead to the torpid electrochemical reaction kinetics while too high content of it will reduce the chargestorage capability and induce structural *** superior NH_(4)^(+)-storage behavior is achieved with the reversible intercalation/deintercalation process of NH_(4)^(+)accompanied by forming/breaking of hydrogen *** expected,the assembled flexible Odm-NHVO//PTCDI quasi-solid-state hybrid supercapacitor(FQSS HSC)also exhibits high areal capacitance,energy density and reliable *** work provides a new avenue for developing materials with oxygen-deficient structure for application in various aqueous non-metal cation storage systems.

关键词： Ammonium vanadate Oxygen defect Ammonium-ion storage Hybrid supercapacitors Electrochemical performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

microneedle patch loaded with ferritin-nanocaged doxorubicin for locally targeted drug delivery and efficient skin cancer treatment

引用

Particuology 2024年第5期88卷 282-289页

作者： feng Li Yuan Yang Hua Yue Shuang Wang Xiao Zhang Wei Wei State Key Laboratory of Biochemical Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China Key Laboratory of Biopharmaceutical Preparation and Delivery Chinese Academy of SciencesBeijing100190China School of Chemical Engineering University of Chinese Academy of SciencesBeijing100049China

Ferritin has emerged as a promising nanocarrier for delivering therapeutic agents to ***,the limited drug loading and the off-target impacts after systemic administration remain challenges for cancer treatment with ferritin-based ***,we develop a microneedle patch loaded with ferritin-nanocaged doxorubicin(DoxFe@Fn/mN)for skin cancer ***,doxorubicin(Dox)is encapsulated in ferritin(Fn)using an iron core-assisted strategy,which results in a 3.4-fold increase in Dox loading compared to the direct loading ***,a polyvinyl alcohol-based microneedle(mN)patch is used for the transdermal delivery of DoxFe@Fn,enabling targeted tumour accumulation of DoxFe@Fn and preventing off-target *** released DoxFe@Fn can bind to CD71 highly expressed on skin cancer cells,facilitating its *** a result,the DoxFe@Fn/mN therapy presents a robust antitumour effect in a melanoma tumour model,showing its potential as a promising therapeutic modality for skin cancer treatment.

关键词： Ferritin microneedle Skin cancer Drug delivery

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Adjustment Analysis method of the Active Surface Antenna Based on Convolutional Neural Network

引用

Research in Astronomy and Astrophysics 2024年第6期24卷 294-306页

作者： You Ban Shang Shi Na Wang Qian Xu Shufei feng School of mechanical Engineering Xinjiang UniversityUrumqi 830017China Xinjiang Astronomical Observatory Chinese Academy of SciencesUrumqi 830011China School of mechanical Engineering Dongguan University of TechnologyDongguan 523808China

Active surface technique is one of the key technologies to ensure the reflector accuracy of the millimeter/submillimeter wave large reflector *** antenna is complex,large-scale,and high-precision equipment,and its active surfaces are affected by various factors that are difficult to comprehensively deal *** this paper,based on the advantage of the deep learning method that can be improved through data learning,we propose the active adjustment value analysis method of large reflector antenna based on deep *** method constructs a neural network model for antenna active adjustment analysis in view of the fact that a large reflector antenna consists of multiple panels spliced *** on the constraint that a single actuator has to support multiple panels(usually 4),an autonomously learned neural network emphasis layer module is designed to enhance the adaptability of the active adjustment neural network *** classical 8-meter antenna is used as a case study,the actuators have a mean adjustment error of 0.00252 mm,and the corresponding antenna surface error is0.00523 *** active adjustment result shows the effectiveness of the method in this paper.

关键词： techniques:radar astronomy telescopes methods:analytical methods:numerical

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Intermittent disturbance mechanical behavior and fractional deterioration mechanical model of rock under complex true triaxial stress paths

引用

International Journal of mining Science and Technology 2024年第1期34卷 117-136页

作者： Zhi Zheng Hongyu Xu Kai Zhang Guangliang feng Qiang Zhang Yufei Zhao State Key Laboratory of Featured metal materials and Life-cycle Safety for Composite Structures Key Laboratory of Disaster Prevention and Structural Safety of Ministry of EducationCollege of Civil Engineering and ArchitectureGuangxi UniversityNanning 530004China State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan 430071China State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin China Institute of Water Resources and Hydropower ResearchBeijing 100080China State Key Laboratory for Geomechanics and Deep Underground Engineering China University of Mining and TechnologyXuzhou 221116China

mechanical excavation,blasting,adjacent rockburst and fracture slip that occur during mining excavation impose dynamic loads on the rock mass,leading to further fracture of damaged surrounding rock in three-dimensional high-stress and even causing ***,a novel complex true triaxial static-dynamic combined loading method reflecting underground excavation damage and then frequent intermittent disturbance failure is *** triaxial static compression and intermittent disturbance tests are carried out on *** effects of intermediate principal stress and amplitude on the strength characteristics,deformation characteristics,failure characteristics,and precursors of monzogabbro are analyzed,intermediate principal stress and amplitude increase monzogabbro strength and tensile fracture *** increases in microseismic parameters during rock loading can be precursors for intermittent rock *** on the experimental result,the new damage fractional elements and method with considering crack initiation stress and crack unstable stress as initiation and acceleration condition of intermittent disturbance irreversible deformation are proposed.A novel three-dimensional disturbance fractional deterioration model considering the intermediate principal stress effect and intermittent disturbance damage effect is established,and the model predicted results align well with the experimental *** sensitivity of stress states and model parameters is further explored,and the intermittent disturbance behaviors at different f are *** study provides valuable theoretical bases for the stability analysis of deep mining engineering under dynamic loads.

关键词： True triaxial static and disturbance test mechanical properties Failure mechanism and precursor Intermittent disturbance effect Fractional mechanical model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A novel high-Cr CoNi-based superalloy with superior high-temperature microstructural stability, oxidation resistance and mechanical properties

引用

International Journal of minerals,metallurgy and materials 2024年第6期31卷 1373-1381页

作者： Xiaorui Zhang min Zou Song Lu Longfei Li Xiaoli Zhuang Qiang feng Beijing Advanced Innovation Center for materials Genome Engineering State Key Laboratory for Advanced MetalsUniversity of Science and Technology BeijingBeijing 100083China

A novel multicomponent high-Cr CoNi-based superalloy with superior comprehensive performance was prepared,and the evaluation of its high-temperature microstructural stability,oxidation resistance,and mechanical properties was conducted mainly using its cast polycrystalline *** results disclosed that the morphology of theγ′phase remained stable,and the coarsening rate was slow during the long-term aging at 900–1000℃.The activation energy forγ′precipitate coarsening of alloy 9CoNi-Cr was(402±51)kJ/mol,which is higher compared with those of CmSX-4 and some other Ni-based and Co-based ***,there was no indica-tion of the formation of topologically close-packed phases during this *** these factors demonstrated the superior microstructural stability of the *** mass gain of alloy 9CoNi-Cr was 0.6 mg/cm^(2) after oxidation at 1000℃ for 100 h,and the oxidation resistance was comparable to advanced Ni-based superalloys CmSX-4,which can be attributed to the formation of a continuous Al_(2)O_(3) protective ***,the compressive yield strength of this cast polycrystalline alloy at high temperatures is clearly higher than that of the conventional Ni-based cast superalloy and the compressive minimum creep rate at 950℃ is comparable to that of the conventional Ni-based cast superalloy,demonstrating the alloy’s good mechanical properties at high *** is partially because high Cr is bene-ficial in improving theγandγ′phase strengths of alloy 9CoNi-Cr.

关键词： CoNi-based superalloys microstructure coarsening oxidation mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Bunching enhancement for coherent harmonic generation by using phase merging effects

引用

matter and Radiation at Extremes 2024年第5期9卷 10-21页

作者： Ke feng Kangnan Jiang Runshu Hu Shixia Luan Wentao Wang Ruxin Li State Key Laboratory of High Field Laser Physics and CAS Center for Excellence in Ultra-intense Laser Science Shanghai Institute of Optics and Fine Mechanics(SIOM)Chinese Academy of Sciences(CAS)ShanghaiPeople’s Republic of China School of Physical Science and Technology ShanghaiTech UniversityShanghaiPeople’s Republic of China Center of materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijingPeople’s Republic of China

In this paper,promising but simple schemes are investigated to enhance the micro-bunching of relativistic electron beams for coherent harmonic generation(CHG)by using phase merging *** contrast to the standard CHG scheme,two specially designed dispersion sections(DSs)are adopted with the DS-modulator–DS *** phase space of the e beam is appropriately coupled in the first DS,and the electrons within one seed wavelength can merge to the same phase with a matched second ***-bunching of the e beam can thus be enhanced by a large margin with much higher-harmonic *** e beams from laser wakefield accelerators(LWFAs)as an example,start-to-end simulations are performed to show the effectiveness and robustness of the proposed schemes with several *** beam current can be optimized to several tens to hundreds of kiloamperes,and the radiation power reaches hundreds of megawatts in the extreme ultraviolet regime within a 3.5 m-long *** proposed schemes offer new opportunities for future compact free-electron lasers driven by LWFAs and provides prospects for truly compact and widely applicable systems.

关键词： modulator harmonic phase

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fabrication of AZ31/mg3Y Composites with Excellent Strength and Plasticity via Accumulated Rolling Bonding and Diffusion Annealing

引用

Acta metallurgica Sinica(English Letters) 2024年第2期37卷 339-352页

作者： Yang feng Wenhuan Chen Zheng Xu Weijun He Bin Jiang Fusheng Pan College of materials Science and Engineering Chongqing UniversityChongqing400044China International Joint Laboratory for Light Alloys(ministry of Education) Chongqing UniversityChongqing400044China

AZ31/mg3Y composites with a layer thickness of 100-200μm were fabricated by accumulated rolling bonding(ARB),which was followed by diffusion annealing at 300℃ for 0-32 *** interface layer,containing numerous Al-Y precipitates,is formed in the mg3Y layer that is adjacent to the interface as a result of Al diffusing from the AZ31 layers into the mg3Y *** thickness of the interface layer gets increased and more precipitates are formed in the interface layer with the extension of the annealing *** microhardness of the AZ31 and mg3Y layer decreases firstly and then reaches a stable value,while the microhardness of the interface layer increases gradually with the extension of the annealing *** AZ31/mg3Y composites exhibit equivalent strength but increased ductility after diffusion annealing,in comparison to the as-rolled AZ31/mg3Y *** addition,the AZ31/mg3Y composites after annealing always present higher strength and ductility than AZ31/AZ31 composite,which was fabricated by the same process as that for the AZ31/mg3Y ***-deformation induced strengthening also plays an important role in the excellent strength and ductility of the annealed AZ31/mg3Y *** study can provide a direction for improving the plasticity and strength of magnesium alloys synergistically.

关键词： AZ31/mg3Y composite Accumulated rolling bonding Diffusion annealing Precipitates Strengthening

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Three-channel CmOS transimpedance amplifier for LiDAR sensor receiver

引用

Journal of Systems Engineering and Electronics 2024年第1期35卷 74-80页

作者： LIU Ruqing ZHU Jingguo JIANG Yan LI feng JIANG Chenghao mENG Zhe Photoelectric R&D Center Academy of Opto-ElectronicsChinese Academy of SciencesBeijing 100094China

For time-of-flight(TOF)light detection and ranging(LiDAR),a three-channel high-performance transimpedance amplifier(TIA)with high immunity to input load capacitance is presented.A regulated cascade(RGC)as the input stage is at the core of the complementary metal oxide semiconductor(CmOS)circuit chip,giving it more immunity to input photodiode detectors.A simple smart output interface acting as a feedback structure,which is rarely found in other designs,reduces the chip size and power consumption *** circuit is designed using a 0.5μm CmOS process technology to achieve low *** device delivers a 33.87 dB?transimpedance gain at 350 *** a higher input load capacitance,it shows a-3 dB bandwidth of 461 mHz,indicating a better detector tolerance at the front end of the *** a 3.3 V supply voltage,the device consumes 5.2 mW,and the total chip area with three channels is 402.8×597.0μm2(including the test pads).

关键词： transimpedance amplifier(TIA) three-channel regulated cascade(RGC) light detection and ranging(LiDAR)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Elliptical vibration chiseling:a novel process for texturing ultra-high-aspect-ratio microstructures on the metallic surface

引用

International Journal of Extreme manufacturing 2024年第2期6卷 449-467页

作者： Zhiwei Li Jianfu Zhang Zhongpeng Zheng Pingfa feng Dingwen Yu Jianjian Wang State Key Laboratory of Tribology in Advanced Equipment Department of Mechanical EngineeringTsinghua UniversityBeijing 100084People’s Republic of China Beijing Key Laboratory of Precision/Ultra-precision manufacturing Equipments and Control Department of Mechanical EngineeringTsinghua UniversityBeijing 100084People’s Republic of China Division of Advanced manufacturing Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055People’s Republic of China

High-aspect-ratio metallic surface microstructures are increasingly demanded in breakthrough applications,such as high-performance heat transfer enhancement and surface plasmon ***,the fast and cost-effective fabrication of high-aspect-ratio microstructures on metallic surfaces remains challenging for existing *** study proposes a novel cutting-based process,namely elliptical vibration chiseling(EV-chiseling),for the high-efficiency texturing of surface microstructures with an ultrahigh aspect *** conventional cutting,EV-chiseling superimposes a microscale EV on a backward-moving *** tool chisels into the material in each vibration cycle to generate an upright chip with a high aspect ratio through material *** to the tool’s backward movement,the chip is left on the material surface to form a microstructure rather than falling *** one microstructure is generated in one vibration cycle,the process can be highly efficient using ultrafast(>1 kHz)tool vibration.A finite element analysis model is established to explore the process mechanics of ***,a mechanistic model of the microstructured surface generation is developed to describe the microstructures’aspect ratio dependency on the process ***,surface texturing tests are performed on copper to verify the efficacy of *** micro ribs with a spacing of 1–10μm and an aspect ratio of 2–5 have been successfully textured on *** with the conventional EV-cutting that uses a forward-moving tool,EV-chiseling can improve the aspect ratio of textured microstructure by up to 40 *** experimental results also verify the accuracy of the developed surface generation model of ***,the effects of elliptical trajectory,depth of cut,tool shape,and tool edge radius on the surface generation of micro ribs have been discussed.

关键词： metallic microstructure high aspect ratio backward-moving cutting vibration cutting chiseling material deformation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：