检索结果-南通市图书馆

Anisotropic time-dependent behaviors of shale under direct shearing and associated empirical creep models

Journal of Rock Mechanics and Geotechnical Engineering 2024年第4期16卷 1262-1279页

作者： Yachen Xie Michael z.Hou Hejuan liu Cunbao Li Shenz.en Key Laboratory of Deep Engineering Sciences and Green Energy Shenzhen UniversityShenzhen518060China Institute of Subsurface Energy Systems Clausthal University of TechnologyClausthal-Zellerfeld38678Germany State Key Laboratory of Geomechanics and Geotechnical Engineering Institute of Rock and Soil MechanicsChinese Academy of SciencesWuhan430071China

Understanding the anisotropic creep behaviors of shale under direct shearing is a challenging *** this context,we conducted shear-creep and steady-creep tests on shale with five bedding orientations (i.e.0°,30°,45°,60°,and 90°),under multiple levels of direct shearing for the first *** results show that the anisotropic creep of shale exhibits a significant stress-dependent *** a low shear stress,the creep compliance of shale increases linearly with the logarithm of time at all bedding orientations,and the increase depends on the bedding orientation and creep *** high shear stress conditions,the creep compliance of shale is minimal when the bedding orientation is 0°,and the steady-creep rate of shale increases significantly with increasing bedding orientations of 30°,45°,60°,and 90°.The stress-strain values corresponding to the inception of the accelerated creep stage show an increasing and then decreasing trend with the bedding orientation.A semilogarithmic model that could reflect the stress dependence of the steady-creep rate while considering the hardening and damage process is *** model minimiz.s the deviation of the calculated steady-state creep rate from the observed value and reveals the behavior of the bedding orientation's influence on the steady-creep *** applicability of the five classical empirical creep models is quantitatively *** shows that the logarithmic model can well explain the experimental creep strain and creep rate,and it can accurately predict long-term shear creep *** on an improved logarithmic model,the variations in creep parameters with shear stress and bedding orientations are *** abovementioned findings,a mathematical method for constructing an anisotropic shear creep model of shale is proposed,which can characteriz. the nonlinear dependence of the anisotropic shear creep behavior of shale on the bedding orientation.

关键词： Rock anisotropy Direct shear creep Creep compliance Steady-creep rate Empirical model Creep constitutive model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Editorial for Special Issue on Commonsense Knowledge and Reasoning:Representation,Acquisition and Applications

引用

Machine Intelligence Research 2024年第2期21卷 215-216页

作者： Kang liu Yangqiu Song Jeff z.Pan Institute of Automation Chinese Academy of SciencesChina Hongkong University of Science and Technology China The University of Edinburgh UK

Commonsense knowledge is an important resource for humans to understand the meanings or semantics of the *** ability to learn and own commonsense knowledge is one of the major gaps between humans and *** recent research progresses about deep learning,like Transformer,pre-trained models,etc.,have made amaz.ng breakthroughs in many fields,including computer version,natural language learning,etc.,letting the machines have rich commonsense knowledge and possess the reasoning ability is still difficult and under-resolved.

关键词： own let breakthrough

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

NUMERICAL SIMULATION OF ROUND TO OVAL ROLLING PROCESS

引用

Acta Metallurgica Sinica(English Letters) 2000年第2期13卷 428-433页

作者： Y. W. Wang, Y. L. King, D. H. Yuan, S. G. liu and z. Y. Yu 1 ) University of Science and Technology Beijing, Beijing 100083, China 2) Daye Special Steel Co., Huangshi 435001, China

Three dimensional thermal-mechanical coupled elasto-plastic FEM has been used for simulation of round to oval single pass rolling. The analysis was conducted using MARC/AUTOFORCE1. 2 code. The material is assumed to be elasto-plastic and it obey the Von Mises yield criterion and Prandtl- Reuss rule. Deformation of the workpiece is simulated in a step-by-step manner,updating the coordinates of material points and the property after each step, so that both nonsteady-state and stendy-state deformation can be simulated. The heat transfter between the workpiece, the rolls, and enviroment and the heat generation due to plastic work and friction force, are considered in the analys- *** the deformation shape of the workpiece, distributions of strains, stresses, strain rates and temperatures, roll-separating force and roll torque are presented.

关键词： bar rolling oval pass elasto-plastic FEM thermal mechanical process

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Compressive property and energy absorption characteristic of interconnected porous Mg-z.-Y alloys with adjusting Y addition

引用

Journal of Magnesium and Alloys 2024年第1期12卷 171-185页

作者： J.A.liu S.J.liu B.Wang W.B.Sun X.J.liu z.W.Han College of Materials Science and Engineering Key Laboratory of Automobile Materials(Ministry of Education)Jilin UniversityChangchun 130022PR China Key Laboratory of Bionic Engineering(Ministry of Education) College of Biological and Agricultural EngineeringJilin UniversityChangchun130022PR China Weihai Institute for Bionics-Jilin University Weihai 264205PR China

In this study,interconnected porous Mg-2z.-xY alloys with different phase compositions were prepared by various Y additions(x=0.4,3,and 6 wt.%)to adjust the compressive properties and energy absorption *** characteriz.tion methods were then applied to identify the microstructure of the porous Mg-z.-Y and describe the details of the second *** tests were performed at room temperature(RT),200℃,and 300℃to study the impact of the Y addition and testing temperature on the compressive properties of the porous *** experimental results showed that a high Y content promotes a microstructure refinement and increases the volume fraction of the second *** the Y content increases,different Mg-z.-Y ternary phases appear:I-phase(Mg_(3)z._(6)Y),W-phase(Mg_(3)z._(3)Y_(2)),and LPSO phase(Mg_(12)z.Y).When the Y content ranges between 0.4%and 6%,the compressive strength increases from 6.30MPa to 9.23 MPa,and the energy absorption capacity increases from 7.33 MJ/m^(3)to 10.97 MJ/m^(3)at RT,which is mainly attributed to the phase composition and volume fraction of the second ***,the average energy absorption efficiency is independent of the Y *** addition,the compressive deformation behaviors of the porous Mg-z.-Y are altered by the testing *** compressive strength and energy absorption capacity of the porous Mg-z.-Y decrease due to the softening effect of the high temperature on the *** deformation behaviors at different temperatures are finally observed to reflect the failure mechanisms of the struts.

关键词： Porous magnesium Rare earth elements Microstructure Compressive behavior Energy absorption characteristic

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Studies on coexpression of human BMP-2 and OPG and the feasibility of gene treatment for osteoporosis

引用

中国临床康复 2002年第20期6卷 3130-3131页

作者： liu J.-z. Hu Y.-Y. Ji z.-L. Chen S.-M. Tao H.-R. Institute of Orthopedic Surgery Xijing Hospital Xi'an 710032 China Department of Biochemistry Molecular Biology Fourth Military Medical University Xi'an 710032 China

Objectives To construct human BMP-2 and OPG coexpressing vector and determine its expression in mannalian cells in vitro. Methods Using the isolated total RNA from osteosacoma cell line MG63 as a template,the cDNA encoding hOPG was amplified by reverse transcription-polymerase chain reation (RT-PCR) method and cloned into mammalian expression vector pIRES2-EGFP endonucleases sites EcoR I and BamH I, and the BMP-2 encoding region gene was cloned into endonucleases site BstX *** the recombinant plasmid pIRES2-OPG-BMP2 was transformed into COS-7 cell line,OPG and BMP-2 expression were determined by Western blot *** (1) The sequence of OPG cDNA obtained in this experiment was the same as that of reported, recombinant plasmid pIRES-BMP2-OPG was constructed successfully. (2) Human OPG and BMP-2 overexpression cell line COS-7 was selected and confirmed by Western blot analysis .Conclusion Human OPG encoding *** and BMP-2 coexpressing vector and cell lineage expressed OPG and BMP-2 were obtained. These datas suggested coexpressing human OPG and BMP-2 may be a promising and logical apporach for treatment of osteoporosis.

关键词：骨质疏松基因治疗 BMP2 OPG 真核载体

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Rational design of AgGaS/z.S/z.S quantum dots with a near-unity photoluminescence quantum yield via double shelling scheme

引用

Journal of Materials Science & Technology 2024年第2期169卷 235-242页

作者： H.X.Lu H.liu z.z.Fu Y.Y.Chen H.Q.Dai z.Hu W.L.z.ang R.Q.Guo Institute for Electric Light Sources School of Information Science and TechnologyFudan UniversityShanghai 200433China Institute of Future Lighting Academy for Engineering and TechnologyFudan UniversityShanghai 200433China Yiwu Research Institute of Fudan University YiwuZhejiang 322000China z.ongshan-Fudan Joint Innovation Center Zhongshan 528437China

In this study,a two-step method was used to synthesiz. highly luminescent AgGaS/z.S/z.S quantum dots(QDs).In the first step,an inner z.S shell was formed via a one-pot method,which resulted in a smaller lattice mismatch between the AgGaS core and the outer z.S shell,thereby facilitating the formation of a thick outer *** the two-step shelling process,the synthesiz.d AgGaS/z.S/z.S QDs showed an excellent photoluminescence quantum yield(PLQY)of 96.4%with a peak wavelength of 508 nm,repre-senting the highest PLQY reported thus far for AgGaS ***,the effect of halogen ions in z. precursors on the shelling process was *** was proposed that the capacity of halogen ions to coordinate with the QDs influenced the balance between z. cation diffusion and z.S shelling ***,the z.S shelling reaction was dominant when z.Cl_(2)was employed,while z. cation diffusion was the dominant process under the I^(−)-rich *** work provides insights into the interfacial restructuring during the z.S shelling and offers a clear map for the tailored synthesis of core/shell QDs.

关键词： AgGaS Quantum dots Photoluminescence Core/shell Alloyed core/shell interface

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

引用

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.Cai B.M.Shi N.Li Y.liu z.G.z.ang Y.N.z.n Q.z.Wang B.L.Xiao z.Y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utiliz.d as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utiliz.ng oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utiliz.ng spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain siz.,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with different prestrain levels

引用

Journal of Materials Science & Technology 2024年第4期171卷 80-93页

作者： Y.H.z.ang H.Li z.W.Yang X.liu Q.F.Gu State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Shaanxi Key Laboratory of High-Performance Precision Forming Technology and Equipment Northwestern Polytechnical UniversityXi’an 710072China

Ni_(47)Ti_(44)Nb_(9)shape memory alloy(SMA)is a promising material in the aerospace field due to its wide transformation *** application of shape memory effect depends on multistep thermomechan-ical loading,viz.,low-temperature deformation and subsequent heating to ***-temperature deformation prestrain plays a pivotal role in shape memory properties tailoring of SMA ***,microstructure evolution and deformation mechanisms of Ni_(47)Ti_(44)Nb_(9)SMA subjected to vari-ous prestrain levels are still *** this end,microstructure evolution and shape memory behaviors of Ni_(47)Ti_(44)Nb_(9)alloy subjected to multistep thermomechanical loading with prestrain levels of 8%-16%at-28℃(M_(s)+30℃)were *** results demonstrate that the stress-strain curve of the specimen exhibits four distinct stages at a maximal prestrain of 16%.Whereas stageⅡand stageⅢend at prestrains of∼8%and∼12%,*** stageⅡ,the stress-induced martensitic transformation is accompanied by the dislocation slip of the NiTi matrix andβ-Nb *** stageⅢ,in addition to the higher density of dislocations and further growth of stress-induced martensite variants(SIMVs),(001)compound twins are introduced as a result of the(001)deformation twinning in stress-induced ***{20-1}martensite twins are gradually introduced in stageⅣ.Correspondingly,after subsequent unloading and heating,a higher density of{114}austenite twins form in the specimen with a larger prestrain of 16%.With increasing prestrain from 8%to 16%,the recoverable strainε_(re)^(T)upon heating increases first and then ***ε_(re)^(T)obtains a maximum of 7.03%at 10%prestrain and de-creases to 6.17%at 16%*** increase ofε_(re)^(T)can be attributed to the formation of new SIMVs,the further growth of existing SIMVs,and the recoverable(001)compound *** the decrease ofε_(re)^(T)is mainly associated with the irrecoverable strain by{20−1}martensite *** effe

关键词： Ni_(47)Ti_(44)Nb_(9)shape memory alloy Wide transformation hysteresis Thermomechanical loading Microstructure evolution Shape memory behaviors Stress-induced martensitic transformation Deformation twinning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

NUMERICAL SIMULATION OF STRESS-STRAIN DISTRIBUTIONS FOR WELD METAL SOLIDIFICATION CRACKING IN STAINLESS STEEL

引用

Acta Metallurgica Sinica(English Letters) 2000年第1期13卷 133-138页

作者： Y. H. Wei R. P. liu and z. J. Dong( 1) National Key Laboratory of Advanced Welding Production Technology, HIT, Harbin 150001, China 2) Harbin Research institute of Welding,Harbin 150080, China)

This paper analyz.d the characteristics of welding solidification crack of stainless steels,and clearly re- vealed the the of the deformation in the molten - the pool and the solidification shrinkage on the stress - strain fields in the trail of molten - weld ***, rheologic properties of the alloys in solid - liquid z.ne were also obtained by measuring the hading and unloading deform curves of the *** a result, a numerical model for simulation of stress - strain distributions of welding solidifi- cation crack was developed. On the basis of the model,the thesis simulated the driving force of solidifi- cation crack of stainless steels, that is, stress - strain fields in the trail of molten-weld pool with fi- nite element method.

关键词： welding solidification crack welding solidification crack driving force,finite element method stress - strain field,numerical simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

引用

Journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.Y.Huang z.Yang S.Y.Yang z.H.Dai Y.J.liu J.H.Liao G.Y.z.ong z.J.Xie Y.P.Fang S.S.z.ang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utiliz.tion of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure Heterostructure Photothermal effect Photocatalyst Hydrogen evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：