检索结果-南通市图书馆

Compressive property and energy absorption characteristic of interconnected porous mg-Zn-Y alloys with adjusting Y addition

在线全文

学校读者我要写书评

暂无评论

journal of magnesium and Alloys 2024年第1期12卷 171-185页

作者： j.A.liu S.j.liu B.Wang W.B.Sun X.j.liu Z.W.Han College of materials Science and Engineering Key Laboratory of Automobile Materials(Ministry of Education)Jilin UniversityChangchun 130022PR China Key Laboratory of Bionic Engineering(ministry of Education) College of Biological and Agricultural EngineeringJilin UniversityChangchun130022PR China Weihai Institute for Bionics-jilin University Weihai 264205PR China

In this study,interconnected porous mg-2Zn-xY alloys with different phase compositions were prepared by various Y additions(x=0.4,3,and 6 wt.%)to adjust the compressive properties and energy absorption *** characterization methods were then applied to identify the microstructure of the porous mg-Zn-Y and describe the details of the second *** tests were performed at room temperature(RT),200℃,and 300℃to study the impact of the Y addition and testing temperature on the compressive properties of the porous *** experimental results showed that a high Y content promotes a microstructure refinement and increases the volume fraction of the second *** the Y content increases,different mg-Zn-Y ternary phases appear:I-phase(mg_(3)Zn_(6)Y),W-phase(mg_(3)Zn_(3)Y_(2)),and LPSO phase(mg_(12)ZnY).When the Y content ranges between 0.4%and 6%,the compressive strength increases from 6.30mPa to 9.23 mPa,and the energy absorption capacity increases from 7.33 mj/m^(3)to 10.97 mj/m^(3)at RT,which is mainly attributed to the phase composition and volume fraction of the second ***,the average energy absorption efficiency is independent of the Y *** addition,the compressive deformation behaviors of the porous mg-Zn-Y are altered by the testing *** compressive strength and energy absorption capacity of the porous mg-Zn-Y decrease due to the softening effect of the high temperature on the *** deformation behaviors at different temperatures are finally observed to reflect the failure mechanisms of the struts.

关键词： Porous magnesium Rare earth elements microstructure Compressive behavior Energy absorption characteristic

Interactive mechanism and friction modelling of transient tribological phenomena in metal forming processes: A review

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第3期12卷 375-395页

作者： Xiao YANG Heli liu Lemeng ZHANG Yiran HU Denis j.POLITIS mohammad m.GHARBI Liliang WANG Department of mechanical Engineering Imperial College LondonLondon SW72AZUK Department of mechanical and manufacturing Engineering University of CyprusNicosia 1678Cyprus Quaker Houghton Deutschland GmbH Dortmund 44319Germany

The accurate representation of tribological boundary conditions at the tool–workpiece interface is crucial for analysis and optimization of formability,material flow,and surface quality of components during metal forming *** has been found that these tribological conditions vary spatially and historically with process parameters and contact *** time-dependent tribological behaviours are also known as transient tribological phenomena,which are widely observed during forming processes and many other manufacturing application ***,constant friction values are usually assigned to represent complex and dynamic interfacial conditions,which would introduce deviations in the relevant *** this paper,transient tribological phenomena and the contemporary understanding of the interaction between friction and wear are reviewed,and it has been found that these phenomena are induced by the transitions of friction mechanisms and highly dependent on complex loading conditions at the *** modelling techniques for transient behaviours for metal forming applications are also *** accurately describe the evolutionary friction values and corresponding wear during forming,the advanced interactive friction modelling has been established for different application scenarios,including lubricated condition,dry sliding condition(metal-on-metal contact),and coated system.

关键词： transient tribological phenomena interactive friction mechanism modelling techniques metal forming

Interfacial stress engineering toward enhancement of ferroelectricity in Al doped HfO_(2)thin films

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第9期33卷 637-643页

作者： S X Chen m m Chen Y liu D W Cao G j Chen Department of microelectronics Jiangsu UniversityZhenjiang 212013China Department of Physics Jiangsu UniversityZhenjiang 212013China Guangdong–Hong Kong–macao joint Laboratory for Intelligent micro-Nano Optoelectronic Technology Foshan UniversityFoshan 528225China

Ferroelectric HfO_(2)has attracted much attention owing to its superior ferroelectricity at an ultra-thin thickness and good compatibility with Si-based complementary metal-oxide-semiconductor(CmOS)***,the crystallization of polar orthorhombic phase(o-phase)HfO_(2)is less competitive,which greatly limits the ferroelectricity of the as-obtained ferroelectric HfO_(2)thin ***,the crystallization of o-phase HfO_(2)can be thermodynamically modulated via interfacial stress *** this paper,the growth of improved ferroelectric Al doped HfO_(2)(HfO_(2):Al)thin films on(111)-oriented Si substrate has been *** analysis has suggested that nonpolar monoclinic HfO_(2):Al grown on(111)-oriented Si substrate suffered from a strong compressive strain,which promoted the crystallization of(111)-oriented o-phase HfO_(2)in the as-grown HfO_(2):Al thin *** addition,the in-plane lattice of(111)-oriented Si substrate matches well with that of(111)-oriented o-phase HfO_(2),which further thermally stabilizes the o-phase HfO_(2).Accordingly,an improved ferroelectricity with a remnant polarization(2P_(r))of 26.7C/cm^(2) has been *** results shown in this work provide a simple way toward the preparation of improved ferroelectric HfO_(2)thin films.

关键词： improved ferroelectricity interfacial stress engineering compressive strain HfO_(2)

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第3期45卷 407-424页

作者： m.SAFI m.VAKILIFARD m.j.mAHmOODI Faculty of Civil Water&Environmental EngineeringShahid Beheshti UniversityTehran ***Iran Faculty of mechanical and Energy Engineering Shahid Beheshti UniversityTehran ***Iran

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency *** different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into ***,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss *** the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COmSOL *** parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse *** results show that considering the rubber viscoelasticity enhances the wave attenuation ***,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal *** 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

关键词： layered metamaterial periodic foundation complex dispersion curve wave transmission diagram

Uncovering the hierarchical clusters in the heat-affected zone of an electron beam weldedα/βtitanium alloy joint

在线全文

学校读者我要写书评

暂无评论

journal of materials Science & Technology 2024年第7期174卷 120-132页

作者： C.Xu X.H.Shao H.j.Yang m.Lv H.Q.liu X.L.ma Shenyang National Laboratory for materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Suzhou laboratory Suzhou 215028China Department of mechanical Engineering Kyushu UniversityFukuoka 819-0395Japan Bay Area Center for Electron microscopy Songshan Lake Materials LaboratoryDongguan 523808China

Using high-resolution transmission Kikuchi diffraction(TKD)and transmission electron microscopy(TEm),we examined the hierarchical clusters that form in situ in the heat-affected zone(HAZ),which are com-monly referred to as“ghost”structures,of bimodal titanium alloy Ti-5Al-2Sn-2Zr-4mo-4Cr(wt%,TC17).The ghost structures are enriched with Al elements but poor in mo and Cr compared to the surroundingβ*** results show that the ghost structure in middle-HAZ mainly consists ofα_(L)laths with a high-angle grain boundary,which exhibits the classic Burgers orientation relationship(BOR)with the host matrix,while it encircles theα_(P)grains in *** the ghost structure is evidenced to form via in-complete martensitic *** results further confirm that the ghost structure is composed ofαL and tinyβ_(L)laths with BOR,with the former being enriched with Al and poor with Cr and mo,while the latter is the ***,twoα_(L)variant clusters with a check-mark morphology are fre-quently observed viewed along[0001]_(αL)//[110]_(βL)directions,which are dominated by the crystallographic and geometrical relationships betweenαandβ*** on the microstructural characterization,it is hypothesized that the ghost structure is transformed from the initialα_(P)phase,due to the coupling ef-fect of high thermal stress(which induces the formation of a large number of dislocations)and element diffusion caused by sudden temperature increase and plunge cooling in the HAZ during the welding pro-cess.

关键词： TC17 titanium alloy Electron beam welding(EBW) The ghost structure Transmission Kikuchi diffraction(TKD) Transmission electron microscopy(TEm)

Physics-constrained graph modeling for building thermal dynamics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy and AI 2024年第2期16卷 150-157页

作者： Ziyao Yang Amol D.Gaidhane ján Drgoňa Vikas Chandan mahantesh m.Halappanavar Frank liu Yu Cao School of Electrical Computer and Energy EngineeringArizona State UniversityTempeAZ 85287USA Pacific Northwest National Laboratory RichlandWA 99354USA Oak Ridge National Laboratory Oak RidgeTN 37830USA

In this paper,we propose a graph model embedded with compact physical equations for modeling the thermal dynamics of *** principles of heat flow across various components in the building,such as walls and doors,fit the message-passing strategy used by Graph Neural networks(GNNs).The proposed method is to represent the multi-zone building as a graph,in which only zones are considered as nodes,and any heat flow between zones is modeled as an edge based on prior knowledge of the building ***,the thermal dynamics of these components are described by compact models in the *** are further employed to train model parameters from collected *** model training,our proposed method enforces physical constraints(e.g.,zone sizes and connections)on model parameters and propagates the penalty in the loss function of *** constraints are essential to ensure model robustness and *** evaluate the effectiveness of the proposed modeling approach on a realistic dataset with multiple *** results demonstrate a satisfactory accuracy in the prediction of multi-zone ***,we illustrate that the new model can reliably learn hidden physical parameters with incomplete data.

关键词： Physics-constrained learning Graph Neural Networks Compact model Building thermal dynamics

Selection of digital fabrication technique in the construction industry--A multi-criteria decision-making approach

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 977-997页

作者： m.P.SALAImANImAGUDAm j.jAYAPRAKASH Department of Structural and Geotechnical Engineering School of Civil EngineeringVellore Institute of TechnologyVellore 632014India

Digital fabrication techniques,in recent decades,have provided the basis of a sustainable revolution in the construction ***,selecting the digital fabrication method in terms of manufacturability and functionality requirements is a complex *** paper presents alternatives and criteria for selection of digital fabrication techniques by adopting the multi-criteria decision-making *** alternatives considered in the study are concrete three-dimensional(3D)printing,shotcrete,smart dynamic casting,material intrusion,mesh molding,injection concrete 3D printing,and thin forming *** criteria include formwork utilization,reinforcement incorporation,geometrical complexity,material enhancement,assembly complexity,surface finish,and build *** demonstrates different multi-criteria decision-making techniques,with both subjective and objective weighting *** given ranking is based on the current condition of digital fabrication in the construction *** study reveals that in the selection of digital fabrication techniques,the criteria including reinforcement incorporation,build area,and geometrical complexity play a pivotal role,collectively accounting for nearly 70% of the overall *** the evaluated techniques,concrete 3D printing emerged as the best performer,however the shotcrete and mesh molding techniques in the second and third positions.

关键词： digital fabrication multicriteria decision-making concrete 3D printing

Structural characterization and electrochemical properties of Ba0.5Sr0.5Co0.8Fe0.2O3-δ and its application for anode of SOEC

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Structural characterization and electrochemical properties o...

Lattice Boltzmann method formulation for simulation of thermal radiation effects on non-Newtonian Al_(2)O_(3) free convection in entropy determination

第九届全国氢能学术会议

作者： B.Yu,m.Y.liu,j.m.Xu,j.Chen Tsinghua University,China

＜正＞High temperature steam electrolysis（HTSE） has received increasing interest in recent years,which provides a potential way for the large-scale production of *** oxide electrolysis cells（SOEC） coupled with advanced high temperature nuclear reactor could achieve a competitive thermal-to-hydrogen conversion *** consumes less

关键词：

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第6期45卷 1085-1106页

作者： m.NEmATI m.SEFID A.KARImIPOUR A.j.CHAmKHA Faculty of mechanical Engineering Yazd UniversityYazd ***Iran Department of mechanical Engineering Najafabad BranchIslamic Azad UniversityNajafabad ***Iran Faculty of Engineering Kuwait College of Science and TechnologyDoha 35004Kuwait

The simultaneous investigation on the parameters affecting the flow of electrically conductive fluids such as volumetric radiation,heat absorption,heat generation,and magnetic field(mF)is very vital due to its existence in various sectors of industry and *** present research focuses on mathematical modeling to simulate the cooling of a hot component through power-law(PL)nanofluid convection *** temperature reduction of the hot component inside a two-dimensional(2D)inclined chamber with two different cold wall shapes is *** formulation of the problem is derived with the lattice Boltzmann method(LBm)by code writing via the FORTRAN *** variables such as the radiation parameter(0–1),the Hartmann number(0–75),the heat absorption/generation coefficient(−5–5),the fluid behavioral index(0.8–1.2),the Rayleigh number(103–105),the imposed mF angle(0°–90°),the chamber inclination angle(−90°–90°),and the cavity cold wall shape(smooth and curved)are *** findings indicate that the presence of radiation increases the mean Nusselt number value for the shear-thickening,Newtonian,and shear thinning fluids by about 6.2%,4%,and 2%,*** most cases,the presence of nanoparticles improves the heat transfer(HT)rate,especially in the cases where thermal conduction dominates *** is the lowest cooling performance index and mF effect for the cavity placed at an angle of 90°.The application in the design of electronic coolers and solar collectors is one of the practical cases of this numerical research.

关键词： thermal performance analysis heat absorption/generation power-law(PL)Al_(2)O_(3)nanofluid magnetohydrodynamics natural convection volumetric radiation inclined cavity