检索结果-南通市图书馆

Enhanced transient photovoltaic characteristics of core–shell ZnSe/ZnS/L-Cys quantum-dot-sensitized TiO_2 thin-film

在线全文

学校读者我要写书评

暂无评论

Chinese Physics B 2018年第6期27卷 415-423页

作者： kui-ying li Lun Ren Tong-De Shen State Key Laboratory of Metastable Materials Science ＆ Technology Yanshan University Qinhuangdao 066004 China

Photoanodic properties greatly determine the overall performance of quantum-dot-sensitized solar cells（QDSCs）. In the present report, the microdynamic behaviors of carriers in the nanocomposite thin-film, a Zn Se QD-sensitized mesoporous La-doped nano-TiO2 thin-film, as a potential candidate for photoanode, are probed via nanosecond transient photovoltaic（TPV） spectroscopy. The results confirm that the L-Cys ligand has a dual function serving as a stabilizer and molecular linker. Large quantities of interface states are located at the energy level with a photoelectric threshold of1.58 eV and a quantum well（QW） depth of 0.67 eV. This QW depth is approximately 0.14 eV deeper than the depth of QW buried in the Zn Se QDs, and a deeper QW results in a higher quantum confinement energy. A strong quantum confinement effect of the interface state may be responsible for the excellent TPV characteristics of the photoanode. For example, the peak intensity of the TPV response of the QD-sensitized thin-film lasts a long time, from 9.40 × 10^（-7） s to 2.96 × 10^（-4） s,and the end time of the PTV response of the QD-sensitized thin-film is extended by approximately an order of magnitude compared with those of the TiO2 substrate and the QDs. The TPV characteristics of the QD-sensitized thin-film change from p-type to n-type for the QDs before and after sensitizing. These properties strongly depend on the extended diffusion length of the photogenerated carries and the reduced recombination rate of photogenerated electron-hole pairs, resulting in prolonged carrier lifetime and an increased level of electron injection into the TiO2 thin-film substrate.

关键词： sensitization core-shell ZnSe quantum dots mesoporous Ti02 thin-film time-resolution photo- voltage

SYNTHESIS AND CHARACTERISTIC OF POLYSILANES CONTAINING Si-H BOND

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 1992年第10期3卷 799-800页

作者： ying kui li Zhao Hui CHEN Department of Materials Science and Applied Chemistry Changsha Institute of TecbnologyChangsha 410003China.

Three kinds of polysilanes containing Si-H bond, ■CH_3SiCH_3■_x■CH_3SiH■_y■_n and■PhSiPh■_π■CH_3SiH■_y■CH_3SiCH_3■, have been synthesized. The structures of these copolymers were investigated by IR, ~1H-NM... 详细信息

关键词： Figure SYNTHESIS AND CHARACTERISTIC OF POLYSILANES CONTAINING Si-H BOND Si

Experimental and numerical study on protective effect of RC blast wall against air shock wave

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 567-579页

作者： Xin-zhe Nian Quan-min Xie Xin-li Kong ying-kang Yao kui Huang State Key Laboratory of Precision Blasting Jianghan UniversityWuhan430056China Hubei Key Laboratory of Blasting Engineering Jianghan UniversityWuhan430056China Hubei(Wuhan)Institute of Explosion and Blasting Technology Jianghan UniversityWuhan430056China College of Defense Engineering Army Engineering University of PLANanjing210007China Institute of Defense Engineering AMSPLALuoyang471023China

Prototype experiments were carried out on the explosion-proof performance of the RC blast *** mass of TNT detonated in the experiments is 5 kg and 20 kg *** shock wave overpressure was tested in different *** above experiments were numerically simulated,and the simulated shock wave overpressure waveforms were compared with that tested and given by CONWEP *** results show that the numerically simulated waveform is slightly different from the test waveform,but similar to CONWEP *** dimensional analysis and numerical simulation under different working conditions,the equation for the attenuation rate of the diffraction overpressure behind the blast wall was *** to the corresponding standards,the degree of casualties and the damage degree of the brick concrete building at a certain distance behind the wall can be determined when parameters are *** above results can provide a reference for the design and construction of the reinforced concrete blast wall.

关键词： Blast wall Shock wave Diffraction Overpressure Protection

lithium-induced graphene layer containing li_(3)P alloy phase to achieve ultra-stable electrode interface for lithium metal anode

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 562-574页

作者： Jia-Xin Chen Guo-Qiang Zhang Xian-ying Qin kui lin Zi-Jin Yang Ge-Meng liang Yue Xia Guo-Bin Zhang Hai-Kun Wu Qiu-Chan Cai Hai lin Bao-Hua li Shenzhen Key Laboratory on Power Battery Safety Research and Shenzhen Geim Graphene Center Tsinghua Shenzhen International Graduate SchoolShenzhen518055China Shenzhen Graphene Innovation Center Co. Ltd.Shenzhen518107China School of Chemical Engineering and Advanced Materials The University of AdelaideAdelaideSA5005Australia Department of Chemistry City University of Hong KongHong Kong990077China

Uncontrolled growth of lithium dendrite will lead to low Coulombic efficiency and poor cycle stability,which hinders the commercialization of lithium metal ***,a novel modified lithium anode with reduced graphene oxide conductive network containing trace lithiophilic phosphorus(P-rGO/Cu)is prepared by electrospraying technique combined with heat treatment *** rGO layer has a concave and undulating conductive structure,which can significantly improve the effective electrical contact between lithium metal and the current collector,speed up the kinetics of interfacial electron transport and reaction,and improve the resistance of the negative electrode to the internal stress caused by volume change of the lithium,which is advantageous for the stability of the SEI *** extremely small and uniformly distributed red phosphorus element avoids the volume change caused by lithiation to the maximum *** two-phase compound li_(3)P obtained by alloying P with li can directionally induce the homogeneous nucleation and dense deposition of lithium metal,address the issue of lithium dendrites and extend the cycle life of the *** obtained P-rGO/Cu exhibits excellent electrochemical performance with an average Coulombic efficiency(CE)of 98%at a current density of 1 mA·cm^(−2) for 400 cycles,and the capacity retention rate of the full cell matched with lithium iron phosphate(LFP)is 83%after 400 cycles at 1C.

关键词： lithium anode Dendrite-free lithiophilicity Induced nucleation deposition

Well-dispersed Sb particles embedded on N-doped carbon nanofibers toward high-performance li-ion battery

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 2994-3006页

作者： ying li Yi-Han Zhao Lu-Lu Zhao Peng-Fei Wang ying Xie Ting-Feng Yi School of Materials Science and Engineering Northeastern UniversityShenyang 110819China Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province School of Resources and MaterialsNortheastern University at QinhuangdaoQinhuangdao 066004China Key Laboratory of Functional Inorganic Material Chemistry Ministry of EducationSchool of Chemistry and Materials ScienceHeilongjiang UniversityHarbin 150080China

The alloy-type material Sb is widely used in the anode materials of lithium-ion batteries(liBs)due to its high theoretical specific ***,its serious volume expansion problem during alloying/dealloying of li~+limits its practical *** this work,C-Sb composite was constructed as anode material of liBs by electrospinning route for the first time,Sb was introduced into the polyacrylonitrile-based hard carbon and coal tar pitch-based soft carbon composite amorphous carbon fiber with a diameter of 300-600 nm,which realized high cycling *** C-Sb-2(the mass ratio of polyacrylonitrile to Sb source is 1:2)electrode displayed charge capacities of 1098.5,930.3,841.7,753.5,643.9 and 545.8 mAh·g^(-1)at 0.1,0.2,0.3,0.5,1 and 2 A·g^(-1),*** when the current density returned to 0.1 A·g^(-1),the charge capacity was 939.3 mAh·g^(-1),revealing good stability and *** introduction of Sb into the amorphous carbon improved its conductivity and addressed the volume expansion issue of high specific capacity Sb during charge/***-situ XRD analysis confirmed the high reversibility of the C-Sb-2 during charging and *** functional theory(DFT)calculations revealed the gradual enhancement of the interface interaction between Sb_(x)li_(y) and amorphous carbon(AMC)with increasing lithium content,contributing to the anchoring of alloy nanoparticles on the AMC surface and buffering the volume change of the ***,the gradual lithiation of Sb facilitated the electron transfer from Sb_(x)li_(y) to *** findings hold promise for designing lithium storage materials with exceptional performance,highlighting the potential of C-Sb composites as anode materials for efficient next-generation lithium storage.

关键词： li-ion battery Metallic Sb Carbon Electrospinning Cycling stability

Highly selective electrosynthesis of 3,4-dihydroisoquinoline accompanied with hydrogen production over three-dimensional hollow CoNi-based microarray electrocatalysts

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2509-2519页

作者： Yu Xin liyu Chen yingwei li kui Shen Guangdong Provincial Key Lab for Green Chemical Product Technology School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China State Key Laboratory of Pulp and Paper Engineering School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China

Electrocatalytic oxidation reaction of biomass-based derivatives is an excellent candidate to replace water oxidation for obtaining both value-added products and hydrogen(H_(2)),but the exploration of competent electrocatalysts is still highly ***,two new types of three-dimensional self-supported hollow microarrays containing CoNi layered double hydroxide(CoNi-LDH)and N-doped carbon nanosheets decorated with CoNi alloyed nanoparticles(CoNi-NC)on carbon cloth(CC)are prepared,which are further used as efficient electrocatalysts for tetrahydroisoquinoline(THIQ)electrooxidation and hydrogen evolution reaction(HER),*** demonstrate that the Co-modulated electronic environment for Ni(II)/Ni(Ⅲ)redox-looping in CoNi-LDH is the main factor to boost the selectivity of 3,4-dihydroisoquinoline(DHIQ)for the indirect electrooxidation process of *** functional theory(DFT)calculations reveal that the Ni(Ⅲ)/Co(Ⅲ)dual sites of CoNi-LDH exhibit enhanced adsorption for THIQ but poorer adsorption for DHIQ compared to pure Co(Ⅲ)or Ni(Ⅲ).Therefore,the Ni(Ⅲ)/Co(Ⅲ)dual sites can effectively inhibit the peroxidation of DHIQ to isoquinoline(IQ)over CoNi-LDH,thus improving the selectivity of DHIQ to nearly 100%,much higher than that of its pure Ni ***,CC@CoNi-NC can deliver high HER activity with low overpotential(40 mV@10 mA·cm^(-2))and high exchange current density(3.08 mA·cm^(-2)).Impressively,the assembled flow-cell device with CC@CoNi-LDH anode and CC@CoNi-NC cathode only requires low cell voltage and electricity consumption of 1.6 V and 3.50 kWh per cubic meter of H_(2)(@25 mA·cm^(-2)).

关键词： highly selective electrosynthesis dihydroisoquinolines hydrogen evolution reaction metal-organic frameworks hollow microarrays

Segmental nature of the Red River fault revealed by seismic anisotropy and geological structures

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第8期67卷 2423-2443页

作者： ying li Yuan GAO School of Earth and Space Sciences University of Science and Technology of ChinaHefei 230026China Key Laboratory of Earthquake Prediction Institute of Earthquake ForecastingChina Earthquake AdministrationBeijing 100036China

As the western boundary of the Sichuan-Yunnan block(SYB),the Red River fault(RRF)is a major fault that controls deep crustal movement and deformation in the southeast margin of the Tibetan Plateau and regulates middle-lower crustal *** data suggest that the RRF is segmented and exhibits distinct variations in seismicity,velocity structure and crustal deformation from north to *** anisotropy reveals a complex pattern of lateral spatial and vertical stratified distributions.(1)From the perspective of crustal stratification,in the upper crust,the fast wave polarization in the north segment of the RRF is complex and possibly influenced by the Sanjiang lateral collision zone and adjacent faults with varying *** fast wave polarization in the middle segment is in the NW-SE direction,indicating a localized area of closed down or locked up with consistent *** in the south segment,it presents a disordered pattern,signifying complex deep tectonics and stress conditions at the wedged intersection *** the middle-lower crust in the north and south segments of the RRF,the azimuthal anisotropy is strong and consistent with the spatial strike of the weak zone characterized by low-velocity and *** suggests a connection between the anisotropy and the material migration.(2)In the whole crustal scale,the fast wave directions in two sides of the RRF are consistent with the NW-SE tectonic *** indicates that the RRF,as a large fault potentially cutting through the whole crust,strongly controls the surrounding media.(3)In the lithospheric scale,the fast wave polarizations are oriented nearly E-W and independent of the fault strike,consistent with the low P-and S-wave velocity structures and positive radial anisotropy in the upper *** fast wave directions could be related to lithospheric olivine deformation and asthenospheric *** paper suggests a decoupling of deformation between the crust and the lithospheri

关键词： Red River fault Seismic anisotropy Geological structures lithosphere Fault segmentation

Secure resource allocation against colluding eavesdropping in a user-centric cell-free massive multiple-input multiple-output system

在线全文

学校读者我要写书评

暂无评论

Frontiers of Information Technology & Electronic Engineering 2024年第4期25卷 500-512页

作者： Na li Yuanyuan GAO kui XU Xiaochen XIA Huazhi HU Yang li Yueyue ZHANG College of Communication Engineering Army Engineering University of PLANanjing 210007China

We investigate the resource allocation problem of a cell-free massive multiple-input multiple-output system under the condition of colluding eavesdropping by multiple passive *** address the problem of limited pilot resources,a scheme is proposed to allocate the pilot with the minimum pollution to users based on access point selection and optimize the pilot transmission power to improve the accuracy of channel *** at the secure transmission problem under a colluding eavesdropping environment by multiple passive eavesdroppers,based on the local partial zero-forcing precoding scheme,a transmission power optimization scheme is formulated to maximize the system’s minimum security spectral *** results show that the proposed scheme can effectively reduce channel estimation error and improve system security.

关键词： Cell-free Colluding eavesdropping limited pilot resources Access point selection Security rate

Configuring single-layer MXene nanosheet onto natural wood fiber via C-Ti-C covalent bonds for high-stability li-S batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第8期95卷 701-711,I0016页

作者： Yangyang Chen Yu liao ying Wu Lei li Zhen Zhang Sha Luo Yiqiang Wu Yan Qing College of Materials Science and Technology Central South University of Forestry and TechnologyChangsha 410004HunanChina

lithium-sulfur batteries(LSBs)are considered promising candidates for next-generation battery technologies owing to their outstanding theoretical energy density and ***,the low conductivity and polysulfide shuttling effect of S cathodes severely hamper the practical performance of ***,in situ-generated single layer MXene nanosheet/hierarchical porous carbonized wood fiber(MX/PCWF)composites are prepared via a nonhazardous eutectic activation strategy coupled with pyrolysis-induced gas *** unique architecture,wherein single layer MXene nanosheets are constructed on carbonized wood fiber walls,ensures rapid polysulfide conversion and continuous electron transfer for redox *** C-Ti-C bonds formed between MXene and PCWF can considerably expedite the conversion of polysulfides,effectively suppressing the shuttle *** impressive capacity of 1301.1 m A h g^(-1)at 0.5 C accompanied by remarkable stability is attained with the MX/PCWF host,as evidenced by the capacity maintenance of 722.6 m A h g^(-1)after 500 ***,the MX/PCWF/S cathode can still deliver a high capacity of 886.8 m A h g^(-1)at a high S loading of 5.6 mg cm^(-2).The construction of two-dimensional MXenes on natural wood fiber walls offers a competitive edge over S-based cathode materials and demonstrates a novel strategy for developing high-performance batteries.

关键词： lithium-sulfur batteries S cathodes MXene nanosheets Wood fiber C-Ti-C bonds