检索结果-南通市图书馆

Oxidation behavior and improvement in nonflammability of LPSO-type Mg–Zn–Y–Sr alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 742-749页

作者： Shin-ichi Inoue kazumasa Iwanaga Yoshihito kawamura Magnesium Research Center Kumamoto University2-39-1 KurokamiChuo-kuKumamoto 860-8555Japan Department of Materials Science Graduate School of Science and TechnologyKumamoto University2-39-1 KurokamiChuo-kuKumamoto 860-8555Japan

Mg_(97)Zn_(1)Y_(2)alloys with high ignition temperatures were developed by adding *** addition of Sr resulted in the formation of a uniform and thin Y_(2)O_(3)***–Zn–Y alloys containing at least 0.25 at.%Sr exhibited ignition temperatures of 1270–1320 *** a result of EDS measurement,Sr was found to be concentrated in the Y_(2)O_(3)*** addition,a mixed film of MgO and Sr O formed on the outer layer in the 1.5 at.%Sr-containing Mg_(97)Zn_(1)Y_(2)*** findings suggest that the uniform and thin Y_(2)O_(3)film that maintains high soundness at high temperatures was formed owing to valence control and the formation of a protective outer oxide film.

关键词： Magnesium alloy Yttrium Strontium High-temperature oxidation nonflammability

In-situ study of the microstructure evolution during tension of a Mg-Y-Zn-Al alloy processed by rapidly solidified ribbon consolidation technique

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 2024-2040页

作者： Jeno Gubicza kristián Máthis Péter nagy Péter Jenei Zoltán Hegedus Andrea Farkas Jozef Vesely Shin-ichi Inoue Daria Drozdenko Yoshihito kawamura Department of Materials Physics Faculty of ScienceEotvos Loránd UniversityPázmány P.sétány 1/ABudapest H-1117Hungary Department of Physics of Materials Faculty of Mathematics and PhysicsCharles UniversityKe Karlovu 512116 Praha 2Czech Republic Deutsches Elektronen-Synchrotron DESY Notkestr.85Hamburg 22603Germany Magnesium Research Center Kumamoto University2-39-1 KurokamiChuo-kuKumamoto 860-8555Japan

Mg-Y-Zn-Al alloys processed by rapidly solidified ribbon consolidation(RSRC)technique exhibit an exceptional mechanical performance indicating promising application *** material has a bimodal microstructure consisting of fine recrystallized and coarse non-recrystallized grains with solute-rich stack.ng faults forming cluster arranged layers(CALs)and nanoplates(CAnaPs),or complete long period stack.ng ordered(LPSO)*** order to reveal the deformation mechanisms,in-situ synchrotron X-ray diffraction line profile analysis was employed for a detailed study of the dislocation arrangement created during tension in Mg-0.9%Zn-2.05%Y-0.15%Al(at%)*** uncovering the effect of the initial microstructure on the mechanical performance,additional samples were obtained by annealing of the as-consolidated specimen at 300 and 400℃ for 2 *** heat treatment at 300℃ had no significant effect on the initial microstructure,its evolution during tension and,thus,the overall deformation behavior under tensile *** the other hand,annealing at 400℃ resulted in a significant increase of the recrystallized grains fraction and a decrease of the dislocation density,leading to only minor degradation of the mechanical *** maximum dislocation density at the failure of the samples corresponding to the plastic strain of 10-25% was estimated to be about 16-20×10^(14)m^(-2).The diffraction profile analysis indicated that most dislocations formed during tension were of non-basal and pyramidal types,what was also in agreement with the Schmid factor values revealed independently from orientation *** was also shown that the dislocation-induced Taylor hardening was much lower below the plastic strain of 3% than above this value,which was explained by a model of the interaction between prismatic dislocations and CAnaPs/LPSO plates.

关键词： Mg-Zn-Y-Al alloy Long period stack.ng ordered(LPSO)phase Cluster arranged nanoplates(CAnaPs) Annealing Tension Dislocation density Hardening

Compression properties of cost-efficient porous expanded clay reinforced AA7075 syntactic foams fabricated by industrial-oriented die casting technology

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第1期21卷 60-70页

作者： İsmail Cem Akgün Çağın Bolat Ali Gökşenli Faculty of Mechanical Engineering Istanbul Technical University34437İstanbulTurkey Faculty of Engineering Samsun University55420SamsunTurkey

In today’s manufacturing industries,hard competition between rival firms makes it compulsory for researchers to design lighter and cheaper machine components due to the megatrends of cost-effectiveness and *** this point,aluminum syntactic foams(ASFs)are new-generation engineering composites and come into the upfront as a *** to their features like low density,sufficient elongation,and perfect energy absorption ability,these advanced foams have been considerably seductive for many industrial sectors *** this study,an industrial-oriented automatic die casting technology was used for the first time to manufacture the combination of AA7075/porous expanded clay(PEC).Micro evaluations(optical and FESEM)reveal that there is a homogenous particle distribution in the foam samples,and inspections are compatible with the other ASF ***,T6 aging heat treatment was operated on one half of the produced foams to explore the probable impact of aging on the compressive *** results show that PEC particles can be an alternative to expensive hollow spheres used in the previous ***,a favorable relationship is ascertained between the aging treatment and mechanical properties such as compression strength and plateau strength.

关键词： die casting porous materials metal matrix sytanctic foams expanded clay compressive deformation

natural Convection Melting in a Rectangular Heat Storage Tank of Carbon nanotube Dispersed Latent Heat Storage Material

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 847-855页

作者： Shin-ichi MORITA Tomoya SAITO kazunori TAkAI Yasutaka HAYAMIZU naoto HARUkI Division of Mechanical and Electrical Engineering Kitami Institute of Technology165 Koen-choKitami-shiHokkaido090-8507Japan national Institute of Technology Yonago College4448 Hikona-cyoYonago-shiTottori683-8502Japan Okayama Prefectural University 111 KubokiSoja-shiOkayama719-1197Japan

A dispersion system fluid can convect even if the dispersoid is a solid ***,heat exchange performance can be improved while maintaining fluidity using a material with high thermal conductivity as the *** study presents the melting performance evaluation results of a latent heat storage material with a carbon nanotube(CnT)dispersion system with high thermal conductivity,which enhances the thermal conductivity of the latent heat storage material and does not limit free *** the thermal conductivity and enhancing the melting convection of the heat storage material result in increased latent heat storage *** this study,the thermal conductivity of the latent heat storage material was successfully increased by dispersing CnTs in the *** 0.1%(in mass)of multi-wall CnT(MWCnT)was dispersed in a paraffin-based latent heat storage material,the shear stress increased by 1.5 times at a shear rate of 500 s^(-1),while tak.ng into account the potential effects of convective ***,a latent heat storage experiment was conducted in a rectangular heat storage tank using the CnT dispersion composition ratio as a parameter.A rectangular vessel with a heated vertical surface was used for the latent heat storage *** melting speed was determined by comparing the amount of latent heat stored in a CnT-dispersed latent heat storage material and a single-phase latent heat storage material *** experimental results show that the time required for the latent heat storage material to completely melt in the heat storage tank was the shortest for the single-phase latent heat storage material ***,the fastest melting progress was observed for the sample with 0.02%(in mass)MWCnT content in the melting rate range of up to approximately 40%in the *** results indicate that this phenomenon is caused by the difference in the melting rates in the upper part of the *** generated data are useful for det

关键词： latent heat storage phase change carbon nano tube free convection heat transfer

Optimizing piezoelectric performance of complex perovskite through increasing diversity of B-site cations

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第3期170卷 78-86页

作者： Mengdi Cheng Dongyan Zhang Yangxi Yan Zhimin Li Pangpang Wang Ri-ichi Murakami School of Advanced Materials and nanotechnology Xidian UniversityXi’an 710126China nanomaterials Group Institute of SystemInformation Technologies and Nanotechnologies(ISIT)Fukuoka Industry-Academia Symphonicity(FiaS)4-1 KyudaishinmachiNishi-kuFukuoka 819-0388Japan School of Mechanical Engineering Chengdu UniversityChengdu 610106China

Piezoelectric materials with unique properties are hugely appealing for high sensitivity sensors and ultrasonic ***,Pb(ni_(1/3)nb_(2/3))O_(3)-Pb(Yb_(1/2)nb_(1/2))O_(3)-PbTiO_(3)piezoelectric system was designed and investigated in *** optimized piezoelectric response(d_(33)=826 pC/n,d_(33)∗=1017 pm/V)together with good temperature stability and negligible performance degradation up to 10^(6) cycles was achieved in 0.58Pnn-0.10PYn-0.32PT *** analysis revealed the amplification of intrinsic and extrinsic contributions in MPB region due to more spontaneous polarization orientations and an increase in chemical disorder of system after the introduction of *** origin of high piezoelectric response was investigated through the combination of scanning electron microscopy and piezoresponse force *** diversity of B-site cations was shown to enhance local structural heterogeneity,weak.n long-range ferroelectric ordered domains,and lower free energy barrier via the formation of nanodomain configuration that promoted polarization rotation,thereby improving piezoelectric properties of the ***,it is suggested that increasing the diversity of B-site cations is an effective strategy for achieving outstanding piezoelectric performance.

关键词： Pnn-PYn-PT ceramics Piezoelectricity enhancement Relaxation behavior Domain structure

Evaluation of slope stability through rock mass classification and k.nematic analysis of some major slopes along nH-1A from Ramban to Banihal, north Western Himalayas

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第1期16卷 167-182页

作者： Amit Jaiswal A.k.Verma T.n.Singh Department of Civil and Environmental Engineering Indian Institute of Technology PatnaPatna801106India

The network of Himalayan roadways and highways connects some remote regions of valleys or hill slopes,which is vital for India’s socio-economic *** to natural and artificial factors,frequency of slope instabilities along the networks has been increasing over last few *** of stability of natural and artificial slopes due to construction of these connecting road networks is significant in safely executing these roads throughout the *** rock mass classification methods are generally used to assess the strength and deformability of rock *** study assesses slope stability along the nH-1A of Ramban district of north Western *** structurally and non-structurally controlled rock mass classification systems have been applied to assess the stability conditions of 14 *** evaluating the stability of these slopes,k.nematic analysis was performed along with geological strength index(GSI),rock mass rating(RMR),continuous slope mass rating(CoSMR),slope mass rating(SMR),and Q-slope in the present *** SMR gives three slopes as completely unstable while CoSMR suggests four slopes as completely *** stability of all slopes was also analyzed using a design chart under dynamic and static conditions by slope stability rating(SSR)for the factor of safety(FoS)of 1.2 and 1 respectively.Q-slope with probability of failure(PoF)1%gives two slopes as stable *** slope angle has been determined based on the Q-slope safe angle equation and SSR design chart based on the *** value ranges given by different empirical classifications were RMR(37-74),GSI(27.3-58.5),SMR(11-59),and CoSMR(3.39-74.56).Good relationship was found among RMR&SSR and RMR&GSI with correlation coefficient(R 2)value of 0.815 and 0.6866,***,a comparative stability of all these slopes based on the above classification has been performed to identify the most critical slope along this road.

关键词： Rock mass classification k.nematic analysis Slope stability Himalayan road Static and dynamic conditions

RBC aggregation,deformation and adhesion to endothelium:Role of nitric oxide derived from L-Arginine and sodium nitroprusside

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Innovative Optical Health Sciences 2024年第5期17卷 53-65页

作者： M.k.Maksimov P.B.Ermolinskiy O.n.Scheglovitova n.n.Sklyank.na A.V.Muravyov A.E.Lugovtsov A.V.Priezzhev Faculty of Physics M.V.Lomonosov Moscow State University bld.1subbuilding.2Leninskie goryMoscow 11991Russia n.F.Gamaleya national Research Center for Epidemiology and Microbiology 18 Gamaleya StreetMoscow 123098Russia k.D.Ushinsky Yaroslavl State Pedagogical University 108/1 Respublikanskaya StreetYaroslavl 150000Russia

Red blood cells(RBCs)are the most abundant human blood *** aggregation and deformation strongly determine blood viscosity which impacts hemorheology and *** turn,RBC properties depend on di®erent endogenous and exogenous *** such factor is nitric oxide(nO),which is mainly produced by endothelial cells(EC)from L-arginine amino acid in the circulatory *** the mechanisms of the RBC-endothelium interplay are not clear up to date and considering its possible clinical importance,the aims of this study are to investigate in vitro:(1)The e®ect of L-arginine induced nO on RBC aggregation and adhesion to endothelium;(2)the nO e®ect on RBC aggregation and deformation induced by L-arginine and sodium nitroprusside without the presence of endothelium in the *** RBC aggregation and adhesion to a monolayer of EC were studied using optical tweezers(OT).The RBC deformability and aggregation without endothelium in the samples were studied using the°ow chamber method and Myrenne *** con¯rmed that nO increases deformability and decreases aggregation of *** showed that the soluble guanylate cyclase pathway appears to be the only nO signaling pathway *** the samples with the endothelium,the\bell-shaped"dependence of RBC aggregation force on L-arginine concentration was observed,which improves our knowledge about the process of nO production by ***,data related to L-arginine accumulation by endothelium were obtained:necessity of the presence of extracellular L-arginine stated by other authors was put under *** our study,nO decreased the RBC-endothelium adhesion,however,the tendency appeared to be weak and was not con¯rmed in another set of *** our knowledge,this is the¯rst attempt to measure the forces of RBC adhesion to endothelium monolayer with OT.

关键词： Red blood cells aggregation L-arginine endothelium optical tweezers Myrenne flow chamber

Stability Analysis of DC Microgrid Clusters Based on Step-by-step System Matrix Building Algorithm

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Modern Power Systems and Clean Energy 2024年第3期12卷 900-912页

作者： k.Jithin n.Mayadevi R.Hari kumar V.P.Mini the Department of Electrical Engineering College of Engineering TrivandrumAPJ Abdul Kalam Technological University(APJAKTU)ThiruvananthapuramIndia

DC microgrids(DCMGs)are made up of a network of sources and loads that are connected by a number of power electronic converters(PECs).The increase in the number of these PECs instigates major concerns in system *** interconnecting the microgrids to form a cluster,the system stability must be *** paper proposes a novel stepby-step system matrix building(SMB)algorithm to update the system matrix of an existing DCMG cluster when a new microgrid is added to the cluster through a distribution *** stability of the individual DCMGs and the DCMG cluster is analyzed using the eigenvalue ***,the particle swarm optimization(PSO)algorithm is used to retune the controller gains if the newly formed cluster is not *** simulation of the DCMG cluster is carried out in MATLAB/Simulink environment to test the proposed *** results are also validated using the OP4510 real-time simulator(RTS).

关键词： Converter DC microgrid cluster eigenvalue interconnection particle swarm optimization system stability system matrix

Optimum Profiles of Endwall Contouring for Enhanced net Heat Flux Reduction and Aerodynamic Performance

在线全文

学校读者我要写书评

暂无评论

Journal of Harbin Institute of Technology(new Series) 2024年第2期31卷 80-92页

作者： Arjun k S Tide P S Biju n Division of Mechanical Engineering School of EngineeringCochin University of Science&TechnologyKalamassery 682022India

Successfully utilized non-axisymmetric endwalls to enhance turbine efficiencies(aerodynamic and turbine inlet temperatures)by controlling the characteristics of the secondary flow in a blade *** is accomplished by steady-state numerical hydrodynamics and deep knowledge of the field of *** of the interaction between mainstream and purge flow contributing supplementary losses in the stage,non-axisymmetric endwalls are highly susceptible to the inception of purge flow exit compared to the flat and any advantage rapidly *** conclusions reveal that the supreme endwall pattern could yield a lowering of the gross pressure loss at the design stage and is related to the size of the top-loss location being productively *** has led to diminished global thermal exchange lowered in the passage of the vane *** reverse flow adjacent to the suction side corner of the endwall is migrated farther from the vane surface,as the deviated pressure spread on the endwall accelerates the flow and progresses the reverse flow core still *** depleted association between the tornado-like vortex and the corner vortex adjacent to the suction side corner of the endwall is the dominant mechanism of control in the contoured end *** this publication,we show that the non-axisymmetric endwall contouring by selective numerical shape change method at most prominent locations is advantageous in lowering the thermal load in turbines to augment the net heat flux reduction as well as the aerodynamic performance using multi-objective optimization.

关键词： endwall contouring turbine vane heat transfer phantom cooling coolant injection net heat flux reduction aerodynamic performance