检索结果-南通市图书馆

The effects of deformation parameters and cooli.g rates on the aging behavior of AZ80+0.4%Ce

Journal of Magnesium and Alloys 2024年第2期12卷 639-658页

作者： Yongbiao Yang Jinxuan guo Cuiying Wang Ting Yan Zhang Wenxuan Jiang Zhimin Zhang Qiang Wang guojun li jun Wang College of Materials Science and Engineering North University of ChinaLane 3Xueyuan RoadTaiyuanShanxiChina030051 State Key Laboratory of Advanced Stainless Steel Materials Taiyuan Iron Steel(Group)Co.Ltd.Taiyuan 030003China Technology Center Shanxi Taigang Stainless Steel Co.Ltd.Taiyuan 030003China

The extruded AZ80+0.4%Ce magnesium alloy was twisted in the temperature range of 300-380℃by using a gleeble 3500 thermal simulation test machine with a torsion *** deformed cylindrical specimens were cooled at a cooli.g rate of 10℃/s or 0.1℃/s,respectively,and aged at 170℃.The microstructure analysis results showed that the grain size decreased with increasing specimen radial position from center(SRPC),and that the strong initial basal texture of the extruded magnesium alloy was *** continuous and discontinuous dynamic recrystallization mechanisms were involved in contributing to the grain refinement for all specimens *** a novel extension twinning induced dynamic recrystallization mechanism was proposed for specimen deformed at 300℃.For the specimens deformed at 300℃and 340℃followed by a slow cooli.g rate(0.1℃/s),precipitates of various shapes(β-Mg_(17)Al_(12)),with the dominant precipitates being on the grains boundaries,appeared on the surface *** specimen deformed at 380℃,lamellar precipitates(LPS)in the interiors of the grains were *** aging,the LPS still dominated for specimens twisted at 380℃;however,the LPS gradually decreased with decreasing deformation temperatures from 380℃to 300℃.Dynamically precipitatedβ,especially those decorating the grain boundaries,changed the competition pictures for the LPS and precipitates of other shapes after ***,LPS dominated the areas for the center section of the specimens after aging regardless of deformation *** temperature deformation with high SRPC followed by rapid cooli.g rate increased the micro hardness of the alloy after aging due to refined grain,reduced precipitates size,decreased lamellar spacing as well as strain hardening.

关键词： AZ80+0.4%Ce magnesium alloy Hot torsion Deformation parameters Cooli.g rate Aging Micro hardness

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Efficacy of recombinant human epidermal growth factor plus sodium hyaluronate eye drops in diabetic dry eye post-cataract surgery

引用

World Journal of Diabetes 2024年第6期15卷 1234-1241页

作者： jun-li.g li Jin Zhao Zhen-Feng guo Chang Xiao Xuan liu Department of Ophthalmology Tianjin Beichen HospitalThe Affiliated Hospital of Nankai UniversityTianjin 300400China Department of Ophthalmology Xianyang First People’s HospitalXianyang 712000Shaanxi ProvinceChina

BACKgROUND Dry eye syndrome(DES)after diabetic cataract surgery can seriously affect the patient’s quality of ***,effective alleviation of symptoms in patients with this disease has important clinical *** To explore the clinical effect of recombinant human epidermal growth factor(rhEgF)plus sodium hyaluronate(SH)eye drops on DES after cataract surgery in patients with *** We retrospectively evaluated 82 patients with diabetes who experienced DES after cataract surgery at Tianjin Beichen Hospital,Affiliated Hospital of Nankai University between April 2021 and April *** were classified into an observation group(42 cases,rhEgF+SH eye drops)and a control group(40 cases,SH eye drops alone),depending on the different treatment *** therapeutic efficacy,dry eye symptom score,tear film breakup time(TFBUT),basic tear secretion score[assessed using Schirmer I test(SIt)],corneal fluorescein staining(FL)score,tear inflammatory markers,adverse reactions during treat-ment,and treatment satisfaction were compared between the two *** Therapeutic efficacy was higher in the observation group compared with the control *** groups showed improved TFBUT and dry eye,as well as improved SIt and FL scores after treatment,with a more pronounced improvement in the observation *** no marked differences in adverse reactions were observed between the two groups,treatment satisfaction was higher in the observation *** rhEgF+SH eye drops rendered clinical benefits to patients by effectively ameliorating dry eye and visual impairment with favorable efficacy,fewer adverse reactions,and high safety ***,this treatment should be promoted in clinical practice.

关键词： Recombinant human epidermal growth factor Sodium hyaluronate eye drops Diabetic patients Dry eye syndrome after cataract surgery Therapeutic efficacy

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Visible light promoted aerobic selective photo-oxidation of cyclohexene on LaCo_(x)Cu_(1−x)O_(3) catalyst

引用

Nano Research 2024年第8期17卷 6940-6950页

作者： Xu guo liru Song Wenyu Wang Fengfeng li Minh Ngoc Ha jun Tang Qiang li.g Ping Cui Qingping Ke College of Chemistry and Chemical Engineering Anhui University of TechnologyMaanshan 243000China VNU Key Laboratory of Advanced Material for green growth Faculty of ChemistryUniversity of ScienceVietnam National UniversityHanoi 100000Vietnam

Heterogeneously catalyzed liquid oxidation of olefins with O_(2) provides an alternative way for synthesizing high-value added ***,we report a straightforward urea-redox and sol-gel process for synthesizing LaCo_(x)Cu_(1−x)O_(3) for aerobic photooxidation of *** research highlights a marked increase in the proportions of Co^(2+) and Cu+species in a low chemical state,as well as enhanced visible light absorption through this *** investigations suggest that the catalytic process,particularly with LaCo_(0.7)Cu_(0.3)O_(3),involves a radical pathway mediated by reactive oxygen *** presence of Cu+/Co^(2+) species and surface oxygen vacancies is proposed to boost O_(2) adsorption and activation on the catalyst,facilitating the formation of ***,Cu^(2+)/Co^(3+) species are thought to aid in generating cyclohexenederived radical *** efficient aerobic oxidation of cyclohexene on LaCo_(0.7)Cu_(0.3)O_(3) catalyst relies on the formation of reactive oxygen species and carbon radicals,facilitated by its strong visible light *** achieves a cyclohexene conversion of 89.4% and selectivity to cyclohex-2-ene-1-one of 72.2%,along with stable recyclability after six *** creation of nano-structured LaCo_(x)Cu_(1−x)O_(3) through the urea-redox and sol-gel process offers a promising avenue for the development of highly efficient catalysts for the aerobic photo-oxidation of cyclohexene to cyclohex-2-ene-1-one in the future.

关键词： perovskite oxide photocatalysis oxidation cyclohexene LaCoCuO_(3) cyclohex-2-ene-1-one

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Design and fabrication of lightweight AlCrFeNiTi_(x) compositionally complex alloys with exceptional specific strength

引用

Rare Metals 2024年第7期43卷 3314-3328页

作者： jun-Zhi li Wei-Zong Bao Jie Chen Bo-Hua Yu Kun Zuo Tian gao Ze-Yun Cai guo-Qiang Xie School of Materials Science and Engineering Harbin Institute of Technology(Shenzhen)Shenzhen 518055China State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China

This study focuses on compositionally complex alloys(CCAs),aiming to achieve a balance between high strength and low density for new energy and aerospace *** composition of AlCrFeNiTi_(x) CCAs is strategically guided by employing density functional theory and the theoretical design of thermodynamic *** CCAs,particularly AlCrFeNiTi_(0.25) alloy,demonstrate remarkable specific yield strength(1640.8 MPa) and 22.7% maximum *** incorporation of Ti facilitates the formation of lightweight and high-strength L2_(1)phase,contributing to the overall high specific *** effects of grain boundary strengthening,solid solution strengthening,Orowan strengthening and Peierls flow stress further enhance *** exploration of micros tructural changes during fracture reveals the role of ordered phases in suppressing crack propagation and absorbing energy within disordered phases,thereby improving the toughness and fracture resistance of *** methods and discoveries establish a robust foundation for advancing the development of novel lightweight CCAs.

关键词： lightweight Compositionally complex alloys Specific yield strength

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Recent advances of high-entropy electrocatalysts for water electrolysis by electrodeposition technology:a short review

引用

Rare Metals 2024年第6期43卷 2371-2390页

作者： Han-Ming Zhang Shao-Fei Zhang li-Hao Zuo Jia-Kang li jun-Xia guo Peng Wang Jin-Feng Sun Lei Dai Hebei Key Laboratory of Flexible Functional Materials School of Materials Science and EngineeringHebei University of Science and TechnologyShijiazhuang 050018China Department of Chemistry National University of SingaporeSingapore117543Singapore

Hydrogen is considered as the promising energy carrier to substitute traditional fossil fuel,due to its cleanliness,renewability and high energy *** electrolysis is a simple and eonvenient technology for hydrogen *** efficiency of water electrolysis for hydrogen production is limited by the electrocatalytic performances on hydrogen evolution reaction(HER)and oxygen evolution reaction(OER).The exorbitant Pt-and Ir-/Ru-based electrocatalysts as optimal HER and OER electrocatalysts,respectively,restrict water electrolysis ***,non-precious metal-based high-entropy electrocatalysts have exhibited excellent electrocatalytic activities and long-term stabilities for water electrolysis,as promising precious cataly st ***,the construction of the high-entropy electroc atalysts is vital to water electrolysis *** technology is an efficient method for the preparation of high-entropy electrocatalysts due to its simple,fast,energy-saving and environmental-friendly ***-component co-precipitation facilely occurs during the electroredox in electrodeposition ***-entropy alloys,oxides,(oxy)hydroxides,phosphides and phosphorus sulfide oxides have been successfully prepared by galvanostatic,potentiostatic electrodeposition,cyclic voltammetry,pulse,nanodroplet-mediated and cathodic plasma electrodeposition ***,introduction of the development of high-entropy electrocatalysts synthesized by electrodeposition technology is significant to researchers and *** and outlooks are also concluded to boost the industrial application of electrodeposition in water electrolysis and other energy conversion areas.

关键词： High-entropy electrocatalysts Electrodeposition technology Water electrolysis Multi-component co-precipitation Excellent electrocatalytic performances

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Carbon dots-derived three-dimensional-ordered macroporous host with high penetrability and catalytic activity for LSBs under lean electrolyte

引用

Rare Metals 2024年第6期43卷 2560-2573页

作者： Jiao-Zi Duan Hua-Yu Pei Quan Yang Xue li Xin Ba Xue Yong jun-li.g guo Si-Yu Lu green Catalysis Center College of ChemistryZhengzhou UniversityZhengzhou 450001China Country State Center for International Cooperation On Designer Low-Carbon&Environmental Materials School of Materials Science and EngineeringZhengzhou UniversityZhengzhou 450001China Hubei Institute of Quality Supervision Inspection Wuhan 430061China Department of Chemistry University of SheffieldSheffeld S37HFUK

The practical energy density of lithium-sulfur batteries(LSBs)is seriously limited by the high electrolyte-to-sulfur ratios(E/S).The E/S can be reduced by employing hosts with easy-to-infiltrate structure that ensures the uniform distribution of a lean electrolyte and high catalytic activity that can suppress"shuttle effect"via accelerating the slow conversion of soluble poly sulfides to insoluble *** the easy-to-infiltrate structures,the three-dimensional-ordered macroporous(3DOM)structure is easier to scale preparation and more suitable for the existing industrial ***,it is difficult to obtain the 3DOM with(1)high penetrability due to the high viscosity of frequently-used organic polymer precursors and(2)high catalytic activity due to the low confinement effect,meaning that uniformly dispersed small-sized catalytic materials are difficult to load on ***,using carbon dots(CDs)with both organic and inorganic properties as a precursor and aggregation limiting agent,a 3DOM host with high penetrability and homodispersed Ni particles of small sizes(Ni-CDs-3DOM)was *** this host:(1)CDs precursor with suitable viscosity can improve the penetrability.(2)CDs can effectively inhibit the agglomeration of Ni particles.(3)Uniformly dispersed small-size Ni particles offer high-efficiency catalytic activity toward sulfur ***,the Ni-CDs-3DOM/sulfur cathode exhibits high sulfur utilization and stable cycli.g performance even under high sulfur loading(5.5 mg·cm^(-2))and low E/S(6.5μl·mg^(-1)).This work indicates the usefulness of CDs in constructing hosts for LSBs with high energy density.

关键词： lithium-sulfur batteries Carbon dots Catalytic action Easy-to-infiltrate structure Lean electrolyte

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

引用

Nano Research 2024年第1期17卷 333-343页

作者： Jing Zhang Jiapei li Longhao Cao Wenhua Cheng Ziyin guo Xiuxia Zuo Chao Wang Ya-jun Cheng Yonggao Xia Yudai Huang State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources College of ChemistryXinjiang UniversityUrumqi 830017China Ningbo Institute of Materials Technology&Engineering Chinese Academy of SciencesNingbo 315201China School of Materials Science and Engineering Tongji UniversityShanghai 200240China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China

liNi0.8Co0.1Mn0.1O_(2)(NCM811),a Ni-rich layered oxide,is a promising cathode material for high-energy density lithium-ion batteries(liBs).However,its structural instability,caused by adverse phase transitions and continuous oxygen release,as well as deteriorated interfacial stability due to excessive electrolyte oxidative decomposition,limits its widespread *** address these issues,a new concept is proposed that surface targeted precise functionalization(STPF)of the NCM811 cathode using a synergistic slurry additive(SSA)*** approach involves coating the NCM811 particle surface with 3-aminopropyl dimethoxy methyl silane(3-ADMS),followed by the precise deposition of ascorbic acid via an acid-base *** slurry additives induce the formation of an ultra-thin spinel surface layer and a stable cathode–electrolyte interface(CEI),which enhances the electrochemical kinetics and inhibits crack *** STPF strategy implemented by the SSA approach significantly improves the cyclic stability and rate performance of the NCM811 cathode in both half-cell and full-cell *** work establishes a promising strategy to enhance the structural stability and electrochemical performance of nickel-rich cathodes and provides a feasible route to promote practical applications of high-energy density lithium-ion battery technology.

关键词： nickel-rich cathode slurry additive lithium-ion battery cathode–electrolyte interface ascorbic acid phase transition

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stability analysis of longwall top-coal caving face in extra-thick coal seams based on an innovative numerical hydraulic support model

引用

International Journal of Mining Science and Technology 2024年第4期34卷 491-505页

作者： jun guo Wenbo Huang guorui Feng Jinwen Bai lirong li Zi Wang Luyang Yu Xiaoze Wen Jie Zhang Wenming Feng College of Mining Engineering Taiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Shanxi Province for Mine Rock Strata Control and Disaster Prevention Taiyuan University of TechnologyTaiyuan 030024China Shanxi Coking Coal group Co. Ltd.Taiyuan 030024China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030024China

The relationship between support and surrounding rock is of great significance to the control of surrounding rock in mining *** view of the fact that most of the existing numerical simulation methods construct virtual elements and stress servo control to approximately replace the hydraulic support problem,this paper establishes a new numerical model of hydraulic support with the same working characteristics as the actual hydraulic support by integrating numerical simulation software Rhino,griddle and FLAC3D,which can realize the simulation of different working *** on this model,the influence mechanism of the supporting strength of hydraulic support on surrounding rock stress regulation and coal stability in front of the top coal caving face in extra thick coal seam were ***,under different support intensity,the abutment pressure of the bearing coal and the coal in front of it presents the “three-stage”evolution *** influence range of support intensity is 15%–30%.Secondly,1.5 MPa is the upper limit of impact that the support strength can have on the front coal failure ***,within a displacement range of 2.76 m from the coal wall,a support strength of1.5 MPa provides optimal control of the horizontal displacement of the coal.

关键词： Extremely thick coal seam Fully mechanized top coal caving Support strength Support-surrounding rock interaction

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Achieving high carrier mobility and low lattice thermal conductivity in geTe-based alloys by cationic/anionic co-doping

引用

Rare Metals 2024年第6期43卷 2784-2795页

作者： Xiao-Qiang Wang Xiao-Quan Hu jun-Yan lin Chu-Bin li Xiao-Tong Yu Qi-Yong Chen li-li Xi Qi-Shuo Yang Han li Ji-Ye Zhang Shuan-Kui li Kai guo School of Physics and Materials Science Guangzhou UniversityGuangzhou 510006China Research Center for Advanced Information Materials(CAIM) Huangpu Research&Graduate School of Guangzhou UniversitySino-Singapore Guangzhou Knowledge CityGuangzhou510555China School of Materials Science and Engineering Shanghai UniversityShanghai 200444China Materials genome Institute Shanghai UniversityShanghai 200444China School of Mechanical and Mining Engineering University of QueenslandBrisbaneQLD 4072Australia Key Laboratory of Si-Based Information Materials&Devices and Integrated Circuits Design Department of Education of Guangdong ProvinceGuangzhou 510006China

TheⅣ-Ⅵcompound geTe is considered as a promising alternative to the toxic PbTe for high-efficiency mid-temperature thermoelectric ***,pristine geTe suffers from a high concentration of ge vacancies,resulting in an excessively high hole concentration(>1×10^(21)cm^(-3)),which greatly limits its thermoelectric *** address this issue,CuBiTe_(2)alloying is introduced to increase the formation energy of ge vacancies in geTe,thereby inhibiting the high carrier *** carrier scattering caused by the electronegativity difference between different elements is suppressed due to the similar electronegativity of Cu and ge atoms.A relatively high hole mobility is obtained,which ultimately leads to a high power ***,by introducing Se as an alloying element at the anionic site in geTe,dense point defects with mass/strainfield fluctuations are *** contributes to the strengthening of phonon scattering,thereby reducing the lattice thermal conductivity from 1.44 W·m^(-1)·K^(-1)for pristine geTe to 0.28 W·m^(-1)·K^(-1)for ge_(0.95)Cu_(0.05)Bi_(0.05)Te_(0.9)Se_(0.15)compound at 623 K.

关键词： geTe Carrier mobility CuBiTe_(2)alloying Lattice thermal conductivity Thermoelectric properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Demonstration of controlled high-dimensional quantum teleportation

引用

Science China(Physics,Mechanics & Astronomy) 2024年第3期67卷 1-6页

作者： Min-Yu Lv Xiao-Min Hu Neng-Fei gong Tie-jun Wang Yu guo Bi-Heng liu Yun-Feng Huang Chuan-Feng li.guang-Can guo CAS Key Laboratory of Quantum Information University of Science and Technology of ChinaHefei 230026China CAS Centerfor Excellence in Quantum Information and Quantum Physics University of Science and Technology of ChinaHefei230026China Hefei National Laboratory University of Science and Technology of ChinaHefei 230088China State Key Laboratory of Information Photonics and Optical Communications School of ScienceBeijing University of Posts and TelecommunicationsBeijing 100876China

Controlled quantum teleportation(CQT), which is regarded as the prelude and backbone for a genuine quantum internet, reveals the cooperation, supervision, and control relationship among the sender, receiver, and controller in the quantum network within the simplest unit. Compared with low-dimensional counterparts, high-dimensional CQT can exhibit larger information transmission capacity and higher superiority of the controller's authority. In this article, we report a proof-of-principle experimental realization of three-dimensional(3D) CQT with a fidelity of 97.4% ± 0.2%. To reduce the complexity of the circuit, we simulate a standard 4-qutrit CQT protocol in a 9×9-dimensional two-photon system with high-quality operations. The corresponding control powers are 48.1% ± 0.2% for teleporting a qutrit and 52.8% ± 0.3% for teleporting a qubit in the experiment, which are both higher than the theoretical value of control power in 2-dimensional CQT protocol(33%). The results fully demonstrate the advantages of high-dimensional multi-partite entangled networks and provide new avenues for constructing complex quantum networks.

关键词： high dimension quantum information quantum teleportation quantum nonlocality

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：