检索结果-南通市图书馆

Friction 2019年第2期7卷 153-168页

作者： Anuj kumar SHARMA jitendra kumar katiyar Shubrajit BHAUMIK Sandipan ROY Tribology and Surface Interaction Research Lab Department of Mechanical EngineeringSRM Institute of Science and Technology Kattankulathur

A hybrid lubricant with improved thermal and tribological properties was developed by blending multiwalled carbon nanotubes(MWCNTs) with alumina-based nanoparticles into cutting fluid at fixed volumetric proportions(10:90). The hybrid cutting fluid was prepared in different volumetric concentrations(0.25, 0.75, and 1.25 vol%), and the tribological properties and contact angles were measured using pin-on-disc tribometry and goniometry, respectively. The study showed a reduction in wear and friction coefficient with increasing nanoparticle concentration. The cutting fluid performance was investigated using minimum quantity lubrication(MQL) in the turning of AISI 304 stainless steel. Regression models were developed for measuring the temperature and tool flank wear in terms of cutting speed, feed, depth of the cut, and nanoparticle concentration using response surface methodology. The developed hybrid nanolubricants significantly reduced the tool flank wear and nodal temperature by 11% and 27.36%, respectively, as compared to alumina-based lubricants.

关键词： hybrids nanolubricants MQL MWCNT tool wear friction coefficient

Prediction of bearing capacity of pile foundation using deep learning approaches

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第6期18卷 870-886页

作者： Manish kumar Divesh Ranjan kumar jitendra KHATTI Pijush SAMUI Kamaldeep Singh GROVER Department of Civil Engineering SRM Institute of Science and Technology Tiruchirappalli CampusTrichy 621105India Department of Civil Engineering National Institute of Technology PatnaBihar 800005India Department of Civil Engineering Faculty of EngineeringThammasat School of EngineeringThammasat UniversityBangkok10200Thailand Department of Civil Engineering Rajasthan Technical UniversityKota 324010India

The accurate prediction of bearing capacity is crucial in ensuring the structural integrity and safety of pile *** research compares the Deep Neural Networks(DNN),Convolutional Neural Networks(CNN),Recurrent Neural Networks(RNN),Long Short-Term Memory(LSTM),and Bidirectional LSTM(BiLSTM)algorithms utilizing a data set of 257 dynamic pile load tests for the first ***,this research illustrates the multicollinearity effect on DNN,CNN,RNN,LSTM,and BiLSTM models’performance and accuracy for the first time.A comprehensive comparative analysis is conducted,employing various statistical performance parameters,rank analysis,and error matrix to evaluate the performance of these *** performance is further validated using external validation,and visual interpretation is provided using the regression error characteristics(REC)curve and Taylor *** from the comparative analysis reveal that the DNN(Coefficient of determination(R^(2))_(training(TR))=0.97,root mean squared error(RMSE)_(TR)=0.0413;R^(2)_(testing(TS))=0.9,RMSE_(TS)=0.08)followed by BiLSTM(R^(2)_(TR)=0.91,RMSE_(TR)=0.782;R^(2)_(TS)=0.89,RMSE_(TS)=0.0862)model demonstrates the highest performance *** is noted that the BiLSTM model is better than LSTM because the BiLSTM model,which increases the amount of information for the network,is a sequence processing model made up of two LSTMs,one of which takes the input in a forward manner,and the other in a backward *** prediction of pile-bearing capacity is strongly influenced by ram weight(having a considerable multicollinearity level),and the effect of the considerable multicollinearity level has been determined for the model based on the recurrent neural network *** this study,the recurrent neural network model has the least performance and accuracy in predicting the pile-bearing capacity.

关键词： deep learning algorithms high-strain dynamic pile test bearing capacity of the pile

On the existence and stability of traversable wormhole solutions with novel shapefunctions in the framework of F(R,L_(m))gravity

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第5期76卷 114-127页

作者： Sourav Chaudhary jitendra kumar S K Maurya Sweeti Kiroriwal Abdul Aziz Department of Mathematics Central University of HaryanaJant-PaliMahendergarhIndia Department of Mathematical and Physical Sciences College of Arts and ScienceUniversity of NizwaP.O.Box 33Nizwa 616Oman

In this work,we have explored wormhole(WH)solutions in F(R,L_(m))gravity by assuming the Morris-Thorne WH metric and F(R,Lm)=R/2+(1+γR)L_(m),whereγis the free model *** determined the WH solutions by utilizing two newly developed shape functions(SF)that satisfy all basic conditions for a WH’s physical *** also observe that the null energy condition(NEC)behaves ***,for both models,we use the volume integral quantifier(VIQ)and Tolman-Oppenheimer-Volkoff(TOV)equation to determine how much exotic matter is needed near the WH throat and the stability of the *** extensive detailed discussions of the matter components have been done via graphical *** obtained WH geometries meet the physically acceptable conditions for a stable wormhole.

关键词： energy conditions wormhole exotic matter F(R L_(m))gravity

Thermo-mechanical and tribological properties of SU-8/h-BN composite with SN150/perfluoropolyether filler

在线全文

学校读者我要写书评

暂无评论

Friction 2020年第1期8卷 151-163页

作者： Anand Singh RATHAUR jitendra Kkatiyar Vinay kumar PATEL Department of Mechanical Engineering Govind Ballabh Pant Institute of Engineering and Technology GhurdauriPauri GarhwalUttarakhand 246194India Department of Mechanical Engineering SRM Institute of Science and TechnologyKattankulathur CampusChennaiTamil Nadu 603203India

In this study, SU-8 and its composites are fabricated by blending 10 wt.% hexagonal boron nitride(h-BN) fillers with/without lubricants, such as 10 wt.% base oil(SN150) and 20 wt.% perfluoropolyether(PFPE). The thickness of SU-8 and its composites coating is fabricated in the range ~100–105 μm. Further, SU-8 and its composites are characterized by a 3D optical profilometer, atomic force microscopy, scanning electron microscopy, a thermal gravimetric analyzer, a goniometer, a hardness tester, and an optical microscope. Under a tribology test performed at different normal loads of 2, 4, and 6 N and at a constant sliding speed of 0.28 m/s, the reduction in the initial and steady-state coefficient of friction is obtained to be ~0.08 and ~0.098, respectively, in comparison to SU-8(~0.42 and ~0.75), and the wear resistance is enhanced by more than 103 times that of pure SU-8. Moreover, the thermal stability is improved by ~80–120 ℃, and the hardness and elastic modulus by ~3 and ~2 times that of pure SU-8, respectively. The SU-8 composite reinforced with 10 wt.% h-BN and 20 wt.% PFPE demonstrated the best thermo-mechanical and tribological properties with a nano-textured surface of high hydrophobicity.

关键词： SU‐8 boron nitride perfluoropolyether(PFPE) base oil(SN 150) in‐situ lubrication

Recent progress and perspective on batteries made from nuclear waste

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2023年第3期34卷 1-8页

作者： Nirmal kumar katiyar Saurav Goel School of Engineering London South Bank UniversityLondonSE10 AAUK University of Petroleum and Energy Studies Dehradun248007India

Sustainable energy sources are an immediate need to cope with the imminent issue of climate change the world is facing *** particular,the long-lasting miniatured power sources that can supply energy continually to power handheld gadgets,sensors,electronic devices,unmanned airborne vehicles in space and extreme mining are some of the examples where this is an acute *** is known from basic physics that radioactive materials decay over few years and some nuclear materials have their half-life until thousands of *** past five decades of research have been spent harnessing the decay energy of the radioactive materials to develop batteries that can last until the radioactive reaction ***,an emergent opportunity of industrial symbiosis to make use of nuclear waste by using radioactive waste as raw material to develop bat-teries with long shelf life presents a great opportunity for sustainable energy resource ***,the current canon of research on this topic is *** perspective draws fresh discussions on the topic while highlighting future directions in this wealthy arena of *** abstract A long-lasting miniaturised nuclear battery utilising 14C radioactive isotope as fuel.

关键词： Sustainable energy Nuclear waste battery Nano-diamond

A new framework for population balance modeling of spray fluidized bed agglomeration

在线全文

学校读者我要写书评

暂无评论

Particuology 2015年第2期13卷 141-154页

作者： Mubashir Hussain jitendra kumar Evangelos Tsotsas Chair of Thermal Process Engineering Otto-von-Guericke University Magdeburg Department of Mathematics Indian Institute of Technology Kharagpur

Previous work （Hussain et al. （2013）. Chemical Engineering Science, 101, 35） has pointed out that the conventional, one-dimensional population balance equation for aggregation can be expanded to accurately reproduce the results of discrete simulations of spray fluidized bed agglomeration. However, some parameters had to be imported from the discrete simulation （Monte-Carlo）. The present paper shows how the expanded population balance can be run without importing parameters from the Monte-Carlo simulation. The expanded population balance still reproduces the results of Monte-Carlo simulations accurately, taking into account key micro-scale phenomena （sessile droplet drying, efficiency of collisions）, but with much lower computational cost. Required input parameters are just the drying time of sessile droplets （calculated in advance）, and the prefactor of an equation that correlates particle collision frequency with fluidized bed expansion. In this way, the expanded population balance is, apart from autonomous, also （nearly） predictive. Its performance is demonstrated by comparisons with both Monte-Carlo results and experimental data for various operating conditions （binder mass flow rate, gas temperature）. Despite formally being a one-dimensional expression, the expanded population balance captures additional properties, such as the number of wet particles and the number of droplets in the system, which are even difficult to measure in exoeriments.

关键词： Population balances Kinetics Aggregation Monte Carlo simulation Fluidized bed Modeling

All-optical adder/subtractor based on terahertz optical asymmetric demultiplexer

在线全文

学校读者我要写书评

暂无评论

Chinese Optics Letters 2009年第6期7卷 530-533页

作者： Dilip kumar Gayen Rajat kumar Pal jitendra Nath Roy Department of Computer Science College of Engineering and Management Department of Computer Science and Engineering Calcutta University Department of Physics College of Engineering and ManagementKolaghat KTPP Township

An all-optical adder/subtractor （A/S） unit with the （TOAD） is proposed. The all-optical A/S unit with help of terahertz optical asymmetric demultiplexer a set of all-optical full-adders and optical exclusive- ORs （XORs）, can be used to perform a fast central processor unit using optical hardware components. We try to exploit the advantages of TOAD-based optical switch to design an integrated all-optical circuit which can perform binary addition and subtraction. With computer simulation results confirming the described methods, conclusions are given.

关键词： EDFA XOR All-optical adder/subtractor based on terahertz optical asymmetric demultiplexer mode

Mechanical, tribological and anti-corrosive properties of polyaniline/graphene coated Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2019年第8期35卷 1767-1778页

作者： Rita Maurya Abdul Rahim Siddiqui Prvan kumar katiyar Kantesh Balani Materials Science and Engineering Indian Institute of Technology Kanpur Kanpur 208016 India Centre for Material Science & Engineering National Institute of Technology Hamirpur Hamirpur 177005 India China-Canada Institute for Advanced Surface & Interface Science and Engineering Jiangsu University of Technology Changzhou 213001 China

The mechanical,tribological and corrosion protection offered to Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn alloys by the epoxy coating containing polyaniline/graphene(PANI/Gr)pigments is undertaken in the current ***/Gr containing coatings were observed to be strongly adherent with a higher scratch hardness(Hs)and plowing hardness(Hp),*** 0.43 GPa,and Hpof 0.61 GPa,respectively when compared to that of neat epoxy coating(Hsof 0.17 GPa,and Hpof 0.40 GPa,respectively).Due to their higher Hsand Hpvalues,PANI/Gr based coatings displayed an enhanced wear resistance(Wear volume,Wv=4.53×10^-3 m^3)than that of neat epoxy coating(Wv=5.15×10^-3 m^3).The corrosion protection efficiency in corrosive environment of 3.5 wt%NaCl solution was obtained to be>99% for PANI/Gr containing coatings when compared to that of neat epoxy *** charge-transfer resistance(R(ct))of the PANI/Gr containing coatings were estimated to be>10^6 cm^2,which indicates their highly protective nature when compared to that of neat epoxy coating(R(ct)10^5 Ω cm^2).Hence,PANI/Gr containing coatings can be potentially used for wear resistance and corrosion protection applications in marine environments.

关键词： Mg-Li alloys Scratch hardness Plowing hardness Wear resistance Corrosion protection efficiency Charge transfer resistance

All-optical conversion scheme from binary to its MTN form with the help of nonlinear material based tree-net architecture

在线全文

学校读者我要写书评

暂无评论

Chinese Optics Letters 2007年第8期5卷 480-483页

作者： Anup kumar Maiti jitendra Nath Roy Sourangshu Mukhopadhyay Department of Electronics Panskura Banamali college MidnapurW.B.India Department of Physics College of Engineering & Management KolaghatKTPP Township.Midnapur(east)W.B.India Department of Physics University of Burdwan GolapbagBurdwanW.B.India

In the field of optical computing and parallel information processing, several number systems have been used for different arithmetic and algebraic operations. Therefore an efficient conversion scheme from one number system to another is very important. Modified trinary number （MTN） has already taken a significant role towards carry and borrow free arithmetic operations. In this communication, we propose a tree-net architecture based all optical conversion scheme from binary number to its MTN form. Optical switch using nonlinear material （NLM） plays an important role.

关键词： tree All-optical conversion scheme from binary to its MTN form with the help of nonlinear material based tree-net architecture net

All-optical prefix tree adder with the help of terahertz optical asymmetric demultiplexer

在线全文

学校读者我要写书评

暂无评论

Chinese Optics Letters 2011年第6期9卷 82-86页

作者： Dilip kumar Gayen Tanay Chattopadhyay Rajat kumar Pal jitendra Nath Roy Department of Computer Science College of Engineering and Management Kolaghat KTPP Township Mechanical Operation (Stage-II) Kolaghat Thermal Power Station WBPDCL Mecheda Purba Medinipur KTPP Sub Post Office Department of Computer Science and Engineering Calcutta University Department of Physics NIT Agartala

We propose and describe an all-optical prefix tree adder with the help of a terahertz optical asymmetric demultiplexer （TOAD） using a set of optical switches. The prefix tree adder is useful in compound adder implementation. It is preferred over the ripple carry adder and the carry lookahead adder. We also describe the principle and possibilities of the all-optical prefix tree adder. The theoretical model is presented and verified through numerical simulation. The new method promises higher processing speed and accuracy. The model can be extended for studying more complex all-optical circuits of enhanced functionality in which the prefix tree adder is the basic building block.

关键词： tree All-optical prefix tree adder with the help of terahertz optical asymmetric demultiplexer XOR SOA