检索结果-南通市图书馆

无线传感器网络中非平面监测区域的分簇路由算法

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

计算机与数字工程 2018年第4期46卷 769-771,801页

作者：付菁波杨凌职业技术学院咸阳712100

论文讨论了一个非平面监测区域中无线传感器网络的分簇路由算法,提出了一个考虑节点剩余能量、提高重要数据转发效率的簇首选举和成簇算法。通过实验仿真可以看到算法明显的提高了成簇的有效性,降低了丢包率。尤其是在大规模的稀疏网络... 详细信息

论文讨论了一个非平面监测区域中无线传感器网络的分簇路由算法,提出了一个考虑节点剩余能量、提高重要数据转发效率的簇首选举和成簇算法。通过实验仿真可以看到算法明显的提高了成簇的有效性,降低了丢包率。尤其是在大规模的稀疏网络中丢包率相比其它算法降低了很多。

关键词：非平面监测区域分簇路由算法

在线全文

学校读者我要写书评

暂无评论

基于热加工图的钼金属热变形特征研究

稀有金属材料与工程 2009年第8期38卷 1358-1362页

作者：王玉凤李付国赵伟刘趁意付静波西北工业大学陕西西安710072 金堆城钼业股份有限公司陕西西安710068

通过热压缩试验研究钼金属在应变速率为0．01～10s^-1，变形温度为900～1450℃条件下的热变形性能，建立了基于流变应力的钼金属热变形的本构方程。综合考虑应变速率和变形温度对材料微观结构及性能的影响，根据动态材料模型（DMM）建... 详细信息

通过热压缩试验研究钼金属在应变速率为0．01～10s^-1，变形温度为900～1450℃条件下的热变形性能，建立了基于流变应力的钼金属热变形的本构方程。综合考虑应变速率和变形温度对材料微观结构及性能的影响，根据动态材料模型（DMM）建立了钼金属的热加工图，并利用加工图确定了热变形时的流变失稳区，分析了不同区域钼金属的高温变形特征。

关键词：钼金属加工图本构关系变形特征

黏结剂含量对喷雾造粒钼粉形貌和物理性能的影响

在线全文

学校读者我要写书评

暂无评论

中国粉体技术 2013年第4期19卷 81-83页

作者：付静波庄飞张晓金堆城钼业股份有限公司技术中心

采用离心式喷雾干燥法对钼粉进行造粒,研究浆料黏结剂含量对造粒钼粉的形貌和松装密度的影响规律。结果表明:当浆料黏结剂质量分数小于2.2%时,造粒钼粉颗粒细小,多数呈破损状态,其松装密度随着黏结剂含量的增加而增大;当浆料黏结剂质量... 详细信息

采用离心式喷雾干燥法对钼粉进行造粒,研究浆料黏结剂含量对造粒钼粉的形貌和松装密度的影响规律。结果表明:当浆料黏结剂质量分数小于2.2%时,造粒钼粉颗粒细小,多数呈破损状态,其松装密度随着黏结剂含量的增加而增大;当浆料黏结剂质量分数大于2.2%时,造粒钼粉颗粒球形度差,表面粗糙度大,其松装密度随着黏结剂含量的增加而减小。

关键词：钼粉黏结剂喷雾造粒

Development of component stiffness equations for thread-fixed one-side bolt connections to an enclosed rectangular hollow section column under tension

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第4期18卷 568-586页

作者： fu-Wei WU Yuan-Qi LI Department of Structural Engineering Tongji UniversityShanghai 200092China State Key Laboratory of Disaster Reduction in Civil Engineering Tongji UniversityShanghai 200092China

The derivation and validation of analytical equations for predicting the tensile initial stiffness of threadfixed one-side bolts(TOBs),connected to enclosed rectangular hollow section(RHS)columns,is presented in this *** unknown stiffness components are considered:the TOBs connection and the enclosed RHS ***,the trapezoidal thread of TOB,as an equivalent cantilevered beam subjected to uniformly distributed loads,is analyzed to determine the associated *** on the findings,the thread-shank serial-parallel stiffness model of TOB connection is *** analysis of the tensile stiffness of the enclosed RHS face due to two bolt forces,the four sidewalls are treated as rotation constraints,thus reducing the problem to a two-dimensional plate *** to the load superposition method,the deflection of the face plate is resolved into three components under various boundary and load *** to the plate deflection theory of Timoshenko,the analytical solutions for the three deflections are derived in terms of the variables of bolt spacing,RHS thickness,height to width ratio,***,the validity of the above stiffness equations is verified by a series of finite element(FE)models of T-stub *** proposed component stiffness equations are an effective supplement to the component-based method.

关键词： initial stiffness component based method thread-fixed one-side bolt rectangular hollow sections analytical equation

Solar evaporation for simultaneous oil-water separation and electricity generation with Janus wood-based absorbers

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Environmental Science & Engineering 2024年第2期18卷 13-23页

作者： Yue Yang Ze fu Qi Zhang Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse School of Environmental and Biological EngineeringNanjing University of Science&TechnologyNanjing 210094China Key Laboratory of Industrial Ecology and Environmental Engineering(Ministry of Education) School of Environmental Science and TechnologyDalian University of TechnologyDalian 116024China National Laboratory of Solid State Microstructures Collaborative Innovation Center of Advanced MicrostructuresCollege of Engineering and Applied SciencesKey Laboratory of Intelligent Optical Sensing and Manipulation(Ministry of Education)Jiangsu Key Laboratory of Artificial Functional MaterialsNanjing UniversityNanjing 210093China

Oily wastewater from ocean oil spills endangers marine ecosystems and human health. Therefore, developing an effective and sustainable solution for separating oil-water mixtures is urgent. Interfacial solar photothermal evaporation is a promising approach for the complete separation of two-phase mixtures using only solar energy. Herein, we report a carbonized wood-based absorber with Janus structure of comprising a hydrophobic top-layer and an oleophobic bottom-layer for simultaneous solar-driven oil-water separation and electricity generation. Under sunlight irradiation, the rapid evaporation of seawater will induce a separation of oil-water mixtures, and cause a high salt concentration region underlying the interface, while the bottom “bulk water” maintains in a low salt concentration, thus forming a salinity gradient. Electricity can be generated by salinity gradient power. Therefore, oil-water separation efficiency of > 99% and derived extra electricity power of ~0.1 W/m2 is achieved under solar radiation, demonstrating the feasibility of oil-water separation and electricity production synchronously directly using solar energy. This work provides a green and cost-effective path for the separation of oil-water mixtures.

关键词： Oily wastewater Carbonized wood Salinity gradient Electricity generation Solar irradiation

A Survey on Distributed Network Localization from a Graph Laplacian Perspective

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第1期37卷 273-293页

作者： HAN Zhimin LIN Zhiyun fu Minyue Artificial Intelligence Institute School of AutomationHangzhou Dianzi UniversityHangzhou 310018China Shenzhen Key Laboratory of Control Theory and Intelligent Systems School of System Design and Intelligent ManufacturingSouthern University of Science and TechnologyShenzhen 518055China Peng Cheng Laboratory Shenzhen 518000China

Network localization serves as a fundamental component for enabling various position based operations in multi-agent systems,facilitating tasks like target searching and formation control by providing accurate position information for all nodes in the *** localization focuses on the challenge of determining the positions of nodes within a network,relying on the known positions of anchor nodes and internode relative *** the past few decades,distributed network localization has garnered significant attention from *** paper aims to provide a review of main results and advancements in the field of distributed network localization,with a particular focus on the perspective of graph *** to its favorable characteristics,graph Laplacian unifies various network localization,even when dealing with diverse types of internode relative measurements,into a unified protocol framework,which can be constructed by a linear method and ensure the global convergence.

关键词： Distributed network localization graph Laplaian sensor network

Deep Guided Attention Network for Joint Denoising and Demosaicing in Real Image

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Electronics 2024年第1期33卷 303-312页

作者： Tao ZHANG Ying fu Jun ZHANG School of Computer Science and Technology Beijing Institute of Technology Advanced Reasearch Institute of Multidisciplinary Science Beijing Institute of Technology

Denoising(DN) and demosaicing(DM) are the first crucial stages in the image signal processing pipeline. Recently, researches pay more attention to solve DN and DM in a joint manner, which is an extremely undetermined inverse problem. Existing deep learning methods learn the desired prior on synthetic dataset, which limits the generalization of learned network to the real world data. Moreover, existing methods mainly focus on the raw data property of high green information sampling rate for DM, but occasionally exploit the high intensity and signalto-noise(SNR) of green channel. In this work, a deep guided attention network(DGAN) is presented for real image joint DN and DM(JDD), which considers both high SNR and high sampling rate of green information for DN and DM, respectively. To ease the training and fully exploit the data property of green channel, we first train DN and DM sub-networks sequentially and then learn them jointly, which can alleviate the error accumulation. Besides, in order to support the real image JDD, we collect paired raw clean RGB and noisy mosaic images to conduct a realistic dataset. The experimental results on real JDD dataset show the presented approach performs better than the state-of-the-art methods, in terms of both quantitative metrics and qualitative visualization.

关键词： Training Visualization Inverse problems Green products Noise reduction Pipelines Signal processing

Photoinduced Dehalocyclization to Access Oxindoles Using Formate as a Reductant

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemistry 2024年第11期42卷 1203-1208页

作者： Wei Ge Jia-Xin Wang Ming-Chen fu Yao fu Hefei National Research Center for Physical Sciences at the Microscale iChEMCAS Key Laboratory of Urban Pollutant ConversionAnhui Province Key Laboratory of Biomass Clean EnergyUniversity of Science and Technology of ChinaHefeiAnhui230026 China Anhui Province Key Laboratory of Value-Added Catalytic Conversion and Reaction Engineering Hefei University of TechnologyHefeiAnhui230009 China

Herein,we report an efficient and practical protocol for the photoinduced dehalocyclization of ortho-halophenylacrylamides with formate by the engagement of a CO_(2) radical anion to access substituted *** method proceeds smoothly under mild conditions and exhibits a wide range of substrate as well as remarkable functional group compatibility.

关键词： Formate CO_(2)Radical ions Oxindole Photocatalysts Cyclization Organohalides

3D printed grafts with gradient structures for organized vascular regeneration

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第3期6卷 505-520页

作者： Yuewei Chen Zhongfei Zou Tao fu Zhuang Li Zhaojie Zhang Meng Zhu Qing Gao Shaofei Wu Guosheng fu Yong He Jiayin fu State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310027People’s Republic of China School of Mechanical Engineering Guizhou UniversityGuiyang 550025People’s Republic of China Key Laboratory of Cardiovascular Intervention and Regenerative Medicine of Zhejiang Province Department of CardiologySir Run Run Shaw HospitalZhejiang UniversityHangzhou 310016People’s Republic of China School of Mechanical Engineering Guizhou Institute of TechnologyGuiyang 550003People’s Republic of China Department of Oral and Maxillofacial Surgery The Second Affiliated Hospital of Zhejiang University School of MedicineSchool of Stomatologyand Key Laboratory of Oral Biomedical Research of Zhejiang ProvinceHangzhouZhejiang 310006People’s Republic of China

Synthetic vascular grafts suitable for small-diameter arteries(<6 mm) are in great ***,there are still no commercially available small-diameter vascular grafts(SDVGs) in clinical practice due to thrombosis and stenosis after in vivo *** designing SDVGs,many studies emphasized reendothelization but ignored the importance of reconstruction of the smooth muscle layer(SML).To facilitate rapid SML regeneration,a high-resolution 3D printing method was used to create a novel bilayer SDVG with structures and mechanical properties mimicking natural *** by the collagen alignment of SML,the inner layer of the grafts had larger pore sizes and high porosity to accelerate the infiltration of cells and their circumferential alignment,which could facilitate SML reconstruction for compliance restoration and spontaneous *** outer layer was designed to induce fibroblast recruitment by low porosity and minor pore size and provide SDVG with sufficient mechanical *** month after implantation,the arteries regenerated by 3D-printed grafts exhibited better pulsatility than electrospun grafts,with a compliance(8.9%) approaching that of natural arteries(11.36%) and significantly higher than that of electrospun ones(1.9%).The 3D-printed vascular demonstrated a three-layer structure more closely resembling natural arteries while electrospun grafts showed incomplete endothelium and immature *** study shows the importance of SML reconstruction during vascular graft regeneration and provides an effective strategy to reconstruct blood vessels through 3D-printed structures rapidly.

关键词： small-diameter vascular graft smooth muscle layer 3D printing endothelialization