检索结果-南通市图书馆

World Journal of Clinical Cases 2023年第29期11卷 7200-7206页

作者： jin Yan ting jin Li wang School of Medicine Jianghan UniversityWuhan 430056Hubei ProvinceChina Department of Hematology The Central Hospital of WuhanWuhan 430014Hubei ProvinceChina

BACKGROUND Immunosuppressive therapy and matched sibling donor hematopoietic stem cell transplantation(MSD-HSCT)are the preferred treatments for aplastic anemia(AA).CASE SUMMARY In this report,we describe a 43-year-old male patient with severe AA who carried BRIP1(also known as FANCJ),TINF2,and TCIRG1 *** of the family pedigree revealed the same TINF2 mutation in his mother and older brother,with his older brother also carrying the BRIP1 variant and demonstrating normal telomere length and hematopoietic *** patient was successfully treated with oral cyclosporine A,eltrombopag,and acetylcysteine,achieving remission 4 years after receiving MSD-HSCT from his older *** This case provides a valuable clinical reference for individuals with suspected pathogenic gene mutations,normal telomere length,and hematopoietic function,highlighting them as potential donors for patients with AA.

关键词： Aplastic anemia Hematopoietic stem cell transplantation BRIP1 gene TINF2 gene Telomere length Case report

Temperature-Dependent Characteristics of GaN Schottky Barrier Diodes with TiN and Ni Anodes

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics Letters 2019年第5期36卷 54-58页

作者： ting-ting wang Xiao wang Xiao-Bo Li jin-Cheng Zhang jin-Ping Ao Key Laboratory of Wide Band-Gap Semiconductor Materials and Devices School of MicroelectronicsXidian UniversityXi’an 710071 Institute of Technology and Science Tokushima UniversityTokushima 770-8506Japan

The effect of temperature on the characteristics of gallium nitride (GaN) Schottky barrier diodes (SBDs) with TiN and Ni anodes is evaluated. With increasing the temperature from 25 to 175℃, reduction of the turn-on voltage and increase of the leakage current are observed for both GaN SBDs with TiN and Ni anodes. The performance after thermal treatment shows much better stability for SBDs with Ti N anode, while those with Ni anode change due to more interface states. It is found that the leakage currents of the GaN SBDs with TiN anode are in accord with the thermionic emission model whereas those of the GaN SBDs with Ni anode are much higher than the model. The Silvaco TCAD simulation results show that phonon-assisted tunneling caused by interface states may lead to the instability of electrical properties after thermal treatment, which dominates the leakage currents for GaN SBDs with Ni anode. Compared with GaN SBDs with Ni anode, GaN SBDs with TiN anode are beneficial to the application in microwave power rectification fields due to lower turn-on voltage and better thermal stability.

关键词： GaN SBD Temperature-Dependent Characteristics of GaN Schottky Barrier Diodes with TiN and Ni Anodes TiN Ni

Differences in rheological and fractal properties of conditioned and raw sewage sludge

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2013年第6期25卷 1145-1153页

作者： Hui jin Yili wang ting Li Yujing Dong Junqing Li Beijing Key Laboratory for Source Control Technology of Water Pollution Beijing Forestry University

Rheological tests for raw and conditioned activated sludge （AS） or anaerobic digested sludge （ADS） show that power-law relationships can be used to describe the evolution of several rheological parameters, i.e., limiting viscosity （η∞）, yield stress （τy）, cohesion energy of the sludge network （Ec）, and storage modulus （G＇）, with total suspended solid （TSS） content in raw and conditioned sludge. A gel-like structure that behaves similar to weak-link flocs/aggregates was observed in AS and ADS. As derived from the double-logarithmic plots of G＇-TSS content, the mass fractal dimensions of the raw and conditioned AS or ADS flocs/aggregates were 2.70 and 2.53 or 2.85 and 2.79, respectively. The theological tests also indicate that both polymer conditioning and increased TSS content led to improved elastic behavior, cohesion energy, and yield stress of the sludge network, as well as expanded the corresponding linear viscoelastic range. The porosity of AS or ADS flocs/aggregates will be improved by polymer conditioning.

关键词： sewage sludge conditioning rheology power law fractal total suspended solid

Different Mechanisms of ε-M and α'-M Variant Selection and the Influencing Factors of ε-M Reversion During Dynamic Tension in TRIP Steel

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2018年第5期31卷 449-455页

作者： Li-Na wang Ping Yang ting jin Wei-Min Mao School of Materials Science and Engineering University of Science and Technology Beijing Department of Materials School of Tianjin University of Science and Technology Beijing

The variant selection of martensites（ε-M and α＇-M） and ε-M reversion in dynamic tensile high-manganese TRIP steel were investigated. α＇-M variant pairs with a zigzag morphology frequently formed, and the pairs of neighboring α＇-M variants were examined in terms of mechanical work and strain energy reduction. The occurrence of a primary α＇-M variant is determined by mechanical work, but high products of mechanical work and strain energy reduction are essential for secondary variant selection. In contrast to α＇-M variant pair selection, ε-M variant selection can be attributed to the highest mechanical work. During ε-M→α＇-M transformation, the mechanical work of ε-M reversion is higher than that of α＇-M variant, thereby implying that ε-M reversion in h110 icgrain is possible. e-M plate distribution also affects the feasibility of ε-M reversion.

关键词： TRIP-assisted steel Dynamic plastic deformation Martensitic transformation Variantselection Orientation relationship

Swelling and diffusion model of a hydrophilic film coating on controlled-release urea particles

在线全文

学校读者我要写书评

暂无评论

Particuology 2017年第1期15卷 73-82页

作者： Ling Yang Di An ting-Jie wang Chengyou Kan Yong jin Department of Chemical Engineering Tsinghua University Beijing 100084. China

Controlled-release urea was fabricated by coating urea particles with a polymer latex in a fluidized bed. The latex film coated on the urea particle surface was hydrophilic and swelled in water. The film swelling in water and urea solution and properties of the swollen film were studied. The film swelling in urea solution followed the Lagergren＇s pseudo-first order kinetics with the swelling coefficient depending on the film material and experimental conditions. The effects of swelling on film structure and permeability were studied. The film permeability coefficient decreased with increasing swelling ratio with an approx- imately linear relationship. Based on the film formation process and structure of the swollen film. a film structure model consisting of dense and swollen phases was proposed. The permeability coefficient of the spherical film and cumulative release of urea from the coated particles were calculated from the swelling ratio of the spherical film. which was determined from the expansion curve of the coated particle during the release process, The calculated and measured release curves agreed well, This research indicates that the swelling of the hydrophilic film and the controlled-release mechanism are important factors in the development of controlled-release urea.

关键词： Coating Controlled -release Particle Permeability Swelling Urea

Effect of Nb-V microalloying on the hot deformation behavior of medium Mn steels

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 360-368页

作者： Yumeng wang Qinyi Guo Bin Hu Haiwen Luo School of Metallurgical and Ecological Engineering University of Science and Technology BeijingBeijing 100083China

The influence of Nb-V microalloying on the hot deformation behavior and microstructures of medium Mn steel(MMS)was investigated by uniaxial hot compression *** establishing the constitutive equations for simulating the measured flow curves,we successfully constructed deformation activation energy(Q)maps and processing maps for identifying the region of flow *** concluded the following consequences of Nb-V alloying for MMS.(i)The critical strain increases and the increment diminishes with the increasing deformation temperature,suggesting that NbC precipitates more efficiently retard dynamic recrystallization(DRX)in MMS compared with solute Nb.(ii)The deformation activation energy of MMS is significantly increased and even higher than that of some reported high Mn steels,suggesting that its ability to retard DRX is greater than that of the high Mn content.(iii)The hot workability of MMS is improved by narrowing the hot processing window for the unstable flow stress,in which fine recrystallized and coarse unrecrystallized grains are present.

关键词： medium manganese steel niobium-vanadium microalloying flow behavior dynamic recrystallization hot workability

High-energy-density lithium manganese iron phosphate for lithium-ion batteries: Progresses, challenges, and prospects

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 1-17页

作者： Bokun Zhang Xiaoyun wang Shuai wang Yan Li Libo Chen Handong Jiao Zhijing Yu Jiguo Tu State Key Laboratory of Advanced Metallurgy University of Science and Technology Beijing Research Institute for Intelligent Wearable Systems The Hong Kong Polytechnic University Institute of Advanced Structure Technology Beijing Institute of Technology

The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion *** manganese iron phosphate (LiMnxFe1-xPO4) has garnered significant attention as a promising positive electrode material for lithium-ion batteries due to its advantages of low cost,high safety,long cycle life,high voltage,good high-temperature performance,and high energy *** LiMnxFe1-xPO4has made significant breakthroughs in the past few decades,there are still facing great challenges in poor electronic conductivity and Li-ion diffusion,manganese dissolution affecting battery cycling performance,as well as low tap *** review systematically summarizes the reaction mechanisms,various synthesis methods,and electrochemical properties of LiMnxFe1-xPO4to analyze reaction processes accurately and guide material ***,the main challenges currently faced are concluded,and the corresponding various modification strategies are discussed to enhance the reaction kinetics and electrochemical performance of LiMnxFe1-xPO4,including multi-scale particle regulation,heteroatom doping,surface coating,as well as microscopic morphology ***,in view of the current research challenges faced by intrinsic reaction processes,kinetics,and energy storage applications,the promising research directions are *** importantly,it is expected to provide key insights into the development of high-performance and stable LiMnxFe1-xPO4materials,to achieve practical energy storage requirements.

关键词： Lithium manganese iron phosphate High energy density Lithium-ion batteries Reaction mechanism Tap density

Flexible molecules dedicate to release strain of inverted inorganic perovskite solar cell

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 87-93页

作者： Hongrui Sun Sanlong wang Pengyang wang Yali Liu Shanshan Qi Biao Shi Ying Zhao Xiaodan Zhang Institute of Photoelectronic Thin Film Devices and Technology Renewable Energy Conversion and Storage Center State Key Laboratory of Photovoltaic Materials and CellsNankai University Key Laboratory of Photoelectronic Thin Film Devices and Technology of Tianjin Haihe Laboratory of Sustainable Chemical Transformations Engineering Research Center of Thin Film Photoelectronic Technology of Ministry of Education Collaborative Innovation Center of Chemical Science and Engineering (Tianjin)

The tensile strain in inorganic perovskite films induced by thermal annealing is one of the primary factors contributing to the inefficiency and instability of inorganic perovskite solar cells （IPSCs）,which reduces the defect formation ***,a flexible molecule 5-maleimidovaleric acid （5-MVA） was introduced as a strain buffer to release the residual strain of *** anhydride and carboxyl groups in 5-MVA interact strongly with the uncoordinated Pb2+through Lewis acid-base reaction,thus tightly“pull”the perovskite *** in-between soft carbon chain increased the structural flexibility of CsPbI2.85Br0.15perovskite materials,which effectively relieved the intrinsic internal strain of CsPbI2.85Br0.15,resisted the corrosion of external strain,and also reduced the formation of defects such as VIand *** addition,the introduction of 5-MVA improved crystal quality,passivated residual defects,and narrowed energy level ***,power conversion efficiency （PCE） of NiOxbased inverted IPSCs increased from 19.25% to 20.82% with the open-circuit voltage enhanced from 1.164 V to 1.230 *** release of strain also improved the stability of CsPbI2.85Br0.15perovskite films and devices.

关键词： Inverted inorganic perovskite solar cells Flexible molecules Strain release Crystallization Energy barrier High PCE

番泻叶、聚乙二醇和二甲基硅油联合应用对胶囊内镜检查可见度及检出率的影响

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

中国内镜杂志 2019年第10期25卷 49-55页

作者：俞海洋万元春王金婷王兆军淮安市淮阴医院消化内科江苏淮安223300 淮安市淮阴医院中医科江苏淮安223300

目的探讨番泻叶、聚乙二醇和二甲基硅油联合应用对于胶囊内镜(CE)检查可见度及检出率的影响。方法选取该院2016年6月-2018年9月拟行CE检查的患者126例,采用随机数表法分为对照组(n=62)与观察组(n=64),两组检查前禁食3 d,对照组予以聚乙... 详细信息

目的探讨番泻叶、聚乙二醇和二甲基硅油联合应用对于胶囊内镜(CE)检查可见度及检出率的影响。方法选取该院2016年6月-2018年9月拟行CE检查的患者126例,采用随机数表法分为对照组(n=62)与观察组(n=64),两组检查前禁食3 d,对照组予以聚乙二醇和二甲基硅油作为肠道准备,观察组在此基础上给予口服番泻叶。比较两组胃排空时间、小肠转运时间、胃和小肠的染色节段长度、绿色条带长度、肠道清洁程度、两组病变检出情况及不良反应发生情况。结果两组患者胃排空时间、小肠转运时间、胃和小肠的染色节段无明显差异(P>0.05);观察组全小肠和远端小肠绿色条带长度短于对照组,差异均有统计学意义[(5.53±2.93)vs(6.74±2.76)cm;t=2.39,P=0.019;(3.37±2.04)vs(5.56±2.13)cm;t=5.90,P=0.000];两组近端小肠清洁程度差异无统计学意义(P>0.05),观察组远端小肠(89.06%vs 59.68%,χ^2=14.35,P=0.000)和全小肠(87.50%vs 48.39%,χ^2=22.23,P=0.000)清洁率明显高于对照组,差异有统计学意义;观察组病变总检出率明显高于对照组(92.18%vs 72.58%,χ^2=8.40,P=0.004);两组不良反应发生率差异无统计学意义(17.74%vs 18.75%,P>0.05)。结论添加番泻叶可有效提高聚乙二醇和二甲基硅油对于CE的检查可见度和检出率。

关键词：小肠疾病番泻叶聚乙二醇二甲基硅油胶囊内镜可见度

Analysis of cytosine methylation in early generations of resynthesized Brassica napus

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2016年第6期15卷 1228-1238页

作者： RAN Li-ping FANG ting-ting RONG Hao JIANG jin-jin FANG Yu-jie wang You-ping Jiangsu Provincial Key Laboratory of Crop Genetics and Physiology Yangzhou University

DNA methylation, an important epigenetic modification, serves as a key function in the polyploidization of numerous crops. In this study, early generations of resynthesized Brassica napus （F1,S1-S3）, ancestral parents B. rapa and B. oleracea were analyzed to characterize their DNA methylation status during polyploidization, applying DNA methylation-sensitive amplifica- tion polymorphism （MSAP） and high-performance liquid chromatography methods. In F, 53.4% fragments were inherited from both A- and C-genomes. Besides, 5.04 and 8.87% fragments in F were inherited from A- and C- genome, respectively. 5.85 and 0.8% fragments were newly appeared and disappeared in resynthesized B. napus, respectively. 13.1% of these gene sites were identified with methylation changes in F, namely, hypermethylation （7.86%） and hypomethylation （5.24%）. The lowest methylation status was detected in F （38.7%） compared with in S1-S3. In S3, 40.32% genes were methylated according to MSAP analysis. Sequencing of methylated fragments indicated that genes involved in multiple biological processes were modified, including transcription factors, protein modification, and transporters. Expression ananlysis of DNA methyltransferase I and DNA methyltransferase chromomethylase 3 in different materials was consistent to the DNA methylation status. These results can generally facilitate dissection of how DNA methylation contributes to genetic stability and improvement of B. napus during polypLoidization.

关键词： resynthesized Brassica napus DNA methylation epigenetics polyploidization