检索结果-南通市图书馆

在线全文

学校读者我要写书评

暂无评论

涉水基础设施综合灾害管理平台

涉水基础设施综合灾害管理平台

Analysis of the current density characteristics in through-mask electrochemical micromachining(TMEMM) for fabrication of micro-hole arrays on invar alloy film

水库大坝高质量建设与绿色发展——中国大坝工程学会2018学术年会

作者： Dong-Hoon Shin jin-kwang lee Ki-Young Kim 韩国水资源公社(K-water)基础设施安全研究中心

根据亚洲减灾中心(ADRC,2016)提供的1987～2016年自然灾害统计数据,水(如洪水和暴雨)引发的灾害为第一大灾害,其发生次数、死亡人数、受灾人数和经济损失的占比分别达到了70.9%、78.9%、84.5%和38.7%,而韩国的灾害变化趋势与之相同。在... 详细信息

根据亚洲减灾中心(ADRC,2016)提供的1987～2016年自然灾害统计数据,水(如洪水和暴雨)引发的灾害为第一大灾害,其发生次数、死亡人数、受灾人数和经济损失的占比分别达到了70.9%、78.9%、84.5%和38.7%,而韩国的灾害变化趋势与之相同。在此背景下,各国灾害管理工作的重点自然都集中在应对洪灾、雨灾和震灾而非其他类型的灾害上。因此,本研究提出了一个涉水基础设施灾害管理平台(WINS)。WINS可以提供灾害管理全过程所需的多种功能,即预防—准备—响应—恢复、实时安全评估、损失信息传送以及通过单一平台为受损涉水基础设施提供应急恢复行动。本灾害管理平台是基于《联合国减灾风险行动计划:可持续发展的风险指引和综合方法》的理念而建,预计其应用将有助于提高城市和涉水基础设施本身的复原力。

关键词：安全管理涉水基础设施灾害平台水坝

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2017年第3期30卷 1231-1241页

作者： Da-som jin kwang-ho CHUN Eun-sang lee School of Mechanical Engineering Inha University Incheon 22212 Republic of Kore Department of Mechanical Engineering Inha University Incheon 22212 Republic of Korea

Invar alloy consisting of 64% iron and 36% nickel has been widely used for the production of shadow masks for organic light emitting diodes（OLEDs） because of its low thermal expansion coefficient（1.86 × 10^-6cm/°C）.To fabricate micro-hole arrays on 30 lm invar alloy film,through-mask electrochemical micromachining（TMEMM） was developed and combined with a portion of the photolithography etching *** precise hole shapes,patterned photoresist（PR） film was applied as an insulating *** investigate the relationship between the current density and the material removal rate,the principle of the electrochemical machining was studied with a focus on the *** finite element method（FEM） was used to verify the influence of each parameter on the current density on the invar alloy film *** parameters considered were the thickness of the PR mask,inter-electrode gap（IEG）,and electrolyte *** of experiments（DOE） was used to figure out the contribution of each parameter.A simulation was conducted with varying parameters to figure out their relationships with the current *** was conducted to select the suitable *** experiment was carried out to verify the simulation *** was possible to fabricate micro-hole arrays on invar alloy film using TMEMM,which is a promising method that can be applied to fabrications of OLEDs shadow masks.

关键词： Electrochemical Invar alloy film Micromachining OLED shadow mask Photoresist film mask(PR film mask) Through-mask electrochemical micromachining(TMEMM)

Techniques for overcoming atretic changes of the portal vein in living donor liver transplantation

在线全文

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2020年第4期19卷 311-317页

作者： Jeong-Moo lee kwang-Woong lee Department of Surgery Seoul National University College of Medicine101 Daehak-roJongno-guSeoul 03080Korea

Background:Spontaneous diversion of the portal flow through collateral vessels into the systemic circulation is frequently observed in liver transplant recipients with severe portal *** induces main portal vein atretic change and modifies flow into the collateral even after donor graft *** atretic changes make liver transplantation *** this article we described several methods for overcoming this challenge by appropriate surgical ***:Three anastomotic techniques for living donor liver transplantation were performed in patients with atretic changes in the portal ***:The three techniques were(1)venoplasty to widen the diameter by using the recipient’s portal vein,and the diameter of the recipient’s portal vein was enlarged using their own portal vein stump patch;(2)conduit with cryopreserved vessels,and we dissected around the superior mesenteric vein and splenic vein junction and a conduit was built using the cryopreserved vessels;and(3)left gastric varix to portal vein anastomosis,if the recipients had large gastric varix and variceal wall was sufficiently thick for ***:Selection of optimal methods for portal vein anastomosis is essential in patients with atrophic change on the portal *** these methods are used aptly,they can be considered as favorable methods for overcoming each situation.

关键词： Atretic portal vein Liver transplantation Anastomosis

Bleeding after endoscopic papillectomy and its risk factors:A single center experience of 196 cases

在线全文

学校读者我要写书评

暂无评论

Hepatobiliary & Pancreatic Diseases International 2024年第6期23卷 613-619页

作者： jin Ho Choi Won Chul Kim Joo Kyung Park Jong Kyun lee Kyu Taek lee kwang Hyuck lee Department of Medicine Division of GastroenterologySamsung Medical CenterSungkyunkwan University School of MedicineSeoul 06351Korea

Background:Endoscopic papillectomy(EP)is an effective method to remove an ampulla of Vater(AoV)adenoma with minimal *** reviewed the clinical outcomes and prognosis of patients undergoing EP,including tumor recurrence and adverse ***:A total of 196 patients who underwent EP from January 2004 to December 2017 were *** information was collected through electronic medical records,and risk factors to predict postprocedural bleeding were analyzed using a multivariate logistic regression ***:A total of 93.9%patients(184/196)underwent complete *** the follow-up period,14.7%patients(27/184)experienced tumor recurrence,and two of seven surgically resected tumors were malignant.A total of 45.4%patients(89/196)experienced adverse events related to *** bleeding occurred in 16.3%of the patients(32/196),and they were all successfully treated with endoscopic hemostasis and conservative *** most frequent site of delayed bleeding was the distal end of the papillary orifice,and 56.3%(18/32)patients of delayed bleeding were classified as having mild severity,the others had moderate *** adenomatous polyposis(FAP)[odds ratio(OR)=3.80,95%confidence interval(CI):1.01-14.29;Pleeding was increased in patients with FAP syndrome and male patients,and post-EP bleeding occurred most commonly in the distal part of the AoV.

关键词： Ampullary neoplasm Endoscopic papillectomy Post-procedural bleeding Risk factor

Plasma Post Oxidation of Plasma Nitrocarburized SKD 61 Steel

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2008年第1期24卷 136-138页

作者： Insup lee kwang-Ho Jeong Department of Advanced Materials Engineering Dongeui University Busan 614-714 Korea

Plasma nitrocarburizing and plasma oxidizing treatments were performed to improve the wear and corrosion resistance of SKD 61 *** nitrocarburizing was conducted for 12 h at 540℃in the nitrogen, hydrogen and methane atmosphere to produce theε-Fe-（2-3）（N,C） *** compound layer produced by plasma nitrocarburising was predominantly composed ofε-phase,with a small proportion ofγ′-Fe-4 （N,C） phase. The thickness of the compound layer and the diffusion layer are about 10μm and about 200μm,respectively. Plasma post oxidation was performed on the nitrocarburized samples with various oxygen/hydrogen ratio at constant temperature of 500℃for 1 *** very thin magnetite （Fe-3O-4） layer of 1-2μm in thickness on top of the compound layer was *** polarization test revealed that plasma nitrocarburizing process contributed a significant improvement of corrosion resistance of SKD 61 ***,the corrosion characteristics of the nitrocarburized compound layer was deteriorated by oxidation treatment.

关键词： Plasma nitrocarburizing Post oxidation ε-Fe2-3(N,C) γ′-Fe4(N,C) Fe3O4

Friction Behavior of Magnetorheological Fluids with Different Material Types and Magnetic Field Strength

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2016年第1期29卷 84-90页

作者： ZHANG Peng lee kwang-Hee lee Chul-Hee Department of Mechanical Engineering Inha University

Magnetorheological （MR） fluid is a type of a smart material that can control its mechanical properties under a magnetic field. Iron particles in MR fluid form chain structures in the direction of an applied magnetic field, which is known as MR effect, resulting in variation of stiffness, shear modulus, damping and tribological characteristics of MR fluid. As MR effect depends on the density of particles in the fluid or the strength of a magnetic field, the experiments are conducted to evaluate the friction property under reciprocating motion by changing the types of MR fluid and the strength of a magnetic field. The material of aluminum, brass, and steel are chosen for specimen as they are the most common material in mechanical applications. The surfaces of specimen are also observed by optical microscope before and after experiments to compare the surfaces with test conditions. The comparing results show that the friction coefficient increases as the strength of a magnetic field increases in regardless of types of MR fluid or the material. Also the density of particle in MR fluid affects the friction characteristic. The results from this research can be used to improve the performance of mechanical applications using MR fluid.

关键词： Magnetorheological (MR) fluid friction characteristics smart material magnetic field

Pyrometallurgical recycling of end-of-life lithium-ion batteries

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1554-1571页

作者： Juheon lee kwang Won Park Il Sohn Sanghoon lee Department of Materials Science and Engineering Seoul 03722Korea Yonsei Industry Cooperation Center Yonsei UniversitySeoul 03722Korea RD Solution Wanju gunJeollabuk do 55365Korea

The global importance of lithium-ion batteries(LIBs)has been increasingly underscored with the advancement of high-performance energy storage ***,the end-of-life of these batteries poses significant challenges from environmental,economic,and resource management *** review paper focuses on the pyrometallurgy-based recycling process of lithium-ion batteries,exploring the fundamental understanding of this process and the importance of its *** on the high energy consumption and emission gas issues of the pyrometallurgical recycling process,we systematically analyzed the capital-intensive nature of this process and the resulting technological ***,we conducted an in-depth discussion on the future research directions to overcome the existing technological barriers and *** review will provide valuable insights for researchers and industry stakeholders in the battery recycling field.

关键词： spent lithium-ion batteries recycling sustainability lithium valuable metal

Recent research progress on magnesium alloys in Korea:A review

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2023年第10期11卷 3545-3584页

作者： Sung Hyuk Park Ye jin Kim Hyun Ji Kim Sang-Cheol jin Jong Un lee Alexander Komissarov kwang Seon Shin School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Laboratory of Hybrid Nanostructured Materials National University of Science and TechnologyMoscow 119049Russia Laboratory of Medical Bioresorption and Bioresistance Moscow State University of Medicine and DentistryMoscow 127473Russia Magnesium Technology Innovation Center School of Materials Science and EngineeringSeoul National UniversitySeoul 08826Republic of Korea

This review highlights the recent advancements in Mg research in South Korea with a prime focus on high-speed-extrudable Mg–Bi-based alloys for high productivity and strength,innovative techniques utilizing{10–12}twinning for improved mechanical properties,and alloying and processing methods for enhanced corrosion ***-alloyed Mg–Bi-based alloys possess thermally stableα-Mg matrix and secondary phase,which ensures high-speed extrusion of these alloys at elevated temperatures without hot ***,they exhibit outstanding extrudability with a maximum extrusion speed of up to 70 m/***,their high alloying contents offer excellent strength even after high-speed extrusion through strong solid solution hardening and particle hardening effects,making them suitable for high-performance extruded Mg *** pre-twinning process utilizing{10–12}twinning and the combined process of pre-twinning and subsequent annealing have shown promise in controlling microstructure and texture of wrought Mg alloys and thus enhancing their mechanical *** pre-twinning process enhances tensile strength,fatigue properties,and age-hardening rate of Mg ***,the combined processes of pre-twinning and subsequent annealing considerably improve their ductility,stretch formability,bending formability,and damping *** have been made to improve the corrosion resistance of Mg alloys through alloying additions,process treatments,and surface *** elements like Ca,Sc,and Sm alter the microstructural features(such as secondary phases and grain size)that affect the corrosion *** treatments such as multidirectional forging,screw rolling,and pulse electron beam can also improve the corrosion resistance by refining the ***,advanced surface coating technologies can create durable and corrosion-resistant layers for effectively protecting the Mg *** these research activities conducted

关键词： South Korea Mg–Bi alloys {10–12}twinning Corrosion Mechanical properties

Effect of light scattering on the performance of a direct absorption solar collector

在线全文

学校读者我要写书评

暂无评论

Frontiers in Energy 2018年第1期12卷 169-177页

作者： kwang Hyun WON Bong Jae lee Department of Mechanical Engineering Korea Advanced Institute ofScience and Technology Daejeon 34141 South Korea

Recently, a solar thermal collector often employs nanoparticle suspension to absorb the solar radiation directly by a working fluid as well as to enhance its thermal performance. The collector efficiency of a direct absorption solar collector （DASC） is very sensitive to optical properties of the working fluid, such as absorption and scattering coefficients. Most of the existing studies have neglected particle scattering by assuming that the size of nanoparticle suspension is much smaller than the wavelength of solar radiation （i.e., Rayleigh scattering is applicable）. If the nanoparticle suspension is made of metal, however, the scattering cross-section of metallic nanoparticles could be comparable to their absorption cross-section depending on the particle size, especially when the localized surface plasmon （LSP） is excited. Therefore, for the DASC utilizing a plasmonic nanofluid supporting the LSP, light scattering from metallic particle suspension must be taken into account in the thermal analysis. The present study investigates the scattering effect on the thermal performance of the DASC employing plasmonic nanofluid as a working fluid. In the analysis, the Monte Carlo method is employed to numerically solve the radiative transfer equation considering the volume scatter- ing inside the nanofluid. It is found that the light scattering can improve the collector performance if the scattering coefficient of nanofluid is carefully engineered depending on its value of the absorption coefficient.

关键词： direct absorption solar collector plasmonicnanofluid light scattering