检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2011年第3期18卷 344-351页

作者： Gao-feng Liu Shang-zhou Zhang Li-qing Chen jian-xun qiu School of Environmental and Materials Engineering Yantai University Yantai 264005 China State Key Laboratory of Rolling and Automation Northeastern University Shenyang 110004 China

The effect of processing parameters on the flow response and microstructural evolution of the a＋b titanium alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si has been studied by conducting isothermal hot compressive tests at a strain rate of 0.01-10 s-1 at 860-1100°C. The true stress-true strain curves of the sample hot-compressed in the a＋b phase region exhibit a peak stress followed by continuous flow softening, whereas in the b region, the flow stress attains a steady-state regime. At a strain rate of 10 s-1, the alloy exhibits plastic flow insta-bilities. According to the kinetic rate equation, the apparent activation energies are estimated to be about 674-705 kJ/mol in the a＋b region and 308-335 kJ/mol in the b region, respectively. When deformed in the a＋b region, the globularization process of the a colony structure occurs, and a dynamic recrystallized microstructures are observed to show bimodal. Dynamic recrystallization can take place in the b region irrespective of starting deformed structures.

关键词： titanium alloys hot pressing deformation microstructural evolution activation energy

Effect of Electric Potentials on Microstructure, Corrosion and Wear Characteristic of the Nitrided Layer Prepared on 2Cr13 Stainless Steel by Plasma Nitriding

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2019年第6期32卷 733-745页

作者： Yang Li Shang-Zhou Zhang jian-xun qiu Yong-Yong He Jun-Jie Xiu Qian-Wen Ye Zhong-Li Liu School of nuclear equipment and nuclear engineering Yantai University.Yantai 264005China State Key Laboratory of Tribology Tsinghua UniversityBeijing 100084China

Plasma nitriding is a widely used technology to enhance the surface performance and extend the service life of alloy *** current research mainly focuses on the influences of time,temperature,gas type and pressure parameters on nitriding behavior,while fewer studies have been conducted on the electric *** paper mainly reports the effect of the electric potential on nitriding *** conditions were set using cathodic,anodic and floating potentials in a plasma nitriding furnace.2Cr13 stainless steel was nitrided at 450°C for 5h in an NH3 *** experimental results show that the nitriding treatment can be well performed under the different electric potentials,but differences exist in microstructures,morphologies and performance results of the modified *** thickness and hardness values of the nitrided layer are ranked as follows:cathodic[anodic[floating *** anodic nitrided surface has an obvious particle deposition layer composed of nitrides and *** and tribological experiments show that the corrosion resistance and wear resistance were significantly improved after a nitriding treatment using the three electric ***,the floating nitriding treatment resulted in the best tribological performance and corrosion resistance.

关键词： Nitriding Stainless steel Wear Corrosion

Enhanced service stability and thermoelectric performance in Cu_(2)−δSebased composites

在线全文

学校读者我要写书评

暂无评论

Science China Materials 2024年第7期67卷 2369-2370页

作者： Pengfei qiu xun Shi State Key Laboratory of High Performance Ceramics and Superfine Microstructure Shanghai Institute of CeramicsChinese Academy of SciencesShanghai 200050China

Thermoelectric(TE)materials can directly convert the industrial waste heat into useful electricity based on the Seebeck effect,providing a promising way to tackle the environmental pollution and global energy crisis[1].In the past several decades,many new high-performance TE materials have been discovered to enrich the TE *** them,Cu_(2)−δSe-based TE materials,which are in line with the“phonon-liquid electron-crystal”concept,have sparked widespread interest due to the high TE figure-of-merit(ZT)and the combination of elements that are nontoxic and earth-abundant[2].In 2012,Liu et al.[3]reported a ZT of 1.5 at 1000 K in the stoichiometric Cu_(2)*** alloying S at the Se-site,the ZT was enhanced to around 2.0 at 1000 K[4].Via incorporating carbon nanotubes,the ZT was further enhanced to 2.4 at 1000 K[5].Moreover,Yang et al.[6]and Zhou et al.[7]reported that the ZT of Cu_(2)Se/BiCuSeO composites can reach 2.7–2.8 around 1000 K.

关键词： composites BiCuSeO performance

Corrosion behavior of pure metals(Ni and Ti)and alloys(316H SS and GH3535)in liquid GaInSn

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第3期35卷 70-83页

作者： jian-Hui Yu Hong-Xia Xu Xiang-Xi Ye Bin Leng Han-xun qiu Xing-Tai Zhou School of Materials and Chemistry University of Shanghai for Science and TechnologyShanghai 200093China Shanghai Institute of Applied Physics Chinese Academy of SciencesShanghai 201800China

In this study,the interactions between a Ga-based liquid metal,GaInSn,and several metal materials,including pure metals(Ni and Ti)and alloys(316H stainless steel(SS)and GH3535),at 650℃were *** aim was to evaluate the corrosion performance and select a suitable candidate material for use as a molten salt manometer diaphragm in thermal energy storage *** results indicated that the alloys(316H SS and GH3535)exhibited less corrosion than pure metals(Ni and Ti)in liquid ***-rich binary intermetallic compounds were found to form on the surfaces of all the tested metal materials exposed to liquid GaInSn,as a result of the decomposition of liquid GaInSn and its reaction with the constituent elements of the metal *** corrosion mechanism for all the tested materials exposed to liquid GaInSn was also investigated and proposed,which may aid in selecting the optimal candidate material when liquid GaInSn is used as the pressure-sensing medium.

关键词： Metal materials Liquid GaInSn Corrosion Intermetallic compounds Thermal energy storage systems

Novel rockburst prediction criterion with enhanced explainability employing CatBoost and nature-inspired metaheuristic technique

在线全文

学校读者我要写书评

暂无评论

Underground Space 2024年第6期19卷 101-118页

作者： Yingui qiu jian Zhou School of Resources and Safety Engineering Central South UniversityChangsha 410083China

Rockburst is a major challenge to hard rock engineering at great *** and timely assessment of rockburst risk can avoid unnecessary casualties and property *** the existence of various methods for rockburst assessment,there remains an urgent need for a comprehensive and reliable criterion that is easy to both apply and *** a new rockburst criterion based on simple parameters can potentially fill this *** its advantages,this criterion can facilitate a more effective and efficient prediction of rockburst potential,thereby contributing significantly to enhancing safety *** this paper,combined with the internal and external factors of rockburst,four control variables(i.e.,integrity index,stress index,brittleness index,and elastic energy index)were selected to be incorporated into a comprehensive rockburstability index(RBSI).Based on 116 sets of rockburst cases,the rockburst potential was accurately quantified and predicted using the categorical boosting(CatBoost)model and the nature-inspired metaheuristic African vultures optimization algorithm(AVOA).In its performance validation,the criterion achieved the highest accuracy of 90.48%,verifying the reliability and effectiveness of the proposed RBSI ***,an interpretive method was applied to analyze the variable influence on the criterion,facilitating the explanation of predictions and the analysis of the formula’s robustness under different *** general,compared with existing criterion methods involving relevant indicators,the newly proposed RBSI criterion enhances the accuracy of rockburst potential prediction,and it can effectively and swiftly evaluate the preliminary risk of ***,a graphical user interface was developed to provide a clear visualization of the assessment of rockburst potential.

关键词： Rockburst criterion CatBoost Metaheuristic optimization Model interpretation Graphical user interface

Phase-field lattice-Boltzmann study on fully coupled thermal-solute-convection dendrite growth of Al-Cu alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Foundry 2024年第2期21卷 125-136页

作者： Yin-qi qiu Meng-wu Wu xun-peng Qin Shou-mei Xiong Hubei Key Laboratory of Advanced Technology for Automotive Components Wuhan University of TechnologyWuhan 430070China Hubei Longzhong Laboratory Xiangyang 441000HubeiChina School of Materials Science and Engineering Tsinghua UniversityBeijing 100084China

Dendrite growth is a complex liquid-solid phase transition process involving multiple physical factors.A phase-field lattice-Boltzmann method was developed to simulate the two-and three-dimension dendrite growth of Al-Cu *** effect of fully coupled thermal-solute-convection interaction on the dendrite growth was investigated by incorporating a parallel-adaptive mesh refinement algorithm into the numerical *** accurately reproducing the latent heat release,solute diffusion and convective transport behaviors at the liquidsolid interface,the interaction mechanism among thermal-solute-convection transport as well as their coupling effects on the dendrite growth dynamics were *** simulation results show that the release of latent heat slows down the dendrite growth rate,and both natural and forced convection disrupt the symmetrical growth of *** combination makes the growth of dendrites more complex,capturing important physical aspects such as recalescence,dendrite tip splitting,dendrite tilting,dendrite remelting,and solute plume in the simulation *** on the robustness and powerful ability of the numerical model,the formation mechanisms of these physical aspects were revealed.

关键词： simulation phase field dendrite growth thermal-solute-convection interaction

Neuronomodulation of Excitable Neurons

在线全文

学校读者我要写书评

暂无评论

Neuroscience Bulletin 2024年第1期40卷 103-112页

作者： Yizhang Chen Lin Xiao jian qiu Institute of Neuroscience Second Military Medical UniversityShanghai 200433China Institute for Brain Research and Rehabilitation Key Laboratory of BrainCognition and Education Sciences of Ministry of EducationSouth China Normal UniversityGuangzhou 510631China Department of Chemical Physiology and Biochemistry Oregon Health and Science UniversityPortlandOR 97239USA

Neuronomodulation refers to the modulation of neural conduction and synaptic transmission(i.e.,the conduction process involved in synaptic transmission)of excitable neurons via changes in the membrane potential in response to chemical substances,from spillover neuro-transmitters to paracrine or endocrine hormones circulating in the *** can be direct or indirect,depending on the transduction pathways from the ligand binding site to the ion pore,either on the same molecule,*** ion channel,or through an intermediate step on different *** major players in direct neurono-modulation are ligand-gated or voltage-gated ion *** key process of direct neuronomodulation is the binding and chemoactivation of ligand-gated or voltage-gated ion channels,either orthosterically or allosterically,by various *** neuronomodulation involves metabotropic receptor-mediated slow potentials,where steroid hormones,cytokines,and chemokines can implement these *** neuronomodulation is of great significance for understanding the physiological mechanisms of brain function,and the occurrence and treatment of diseases.

关键词： Neuron Membrane potential Excitability Chemoactivation Neuronomodulation

Reaction mechanism between Al_(2)O_(3)–MgO refractory materials and rare earth high-carbon heavy rail steel

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1153-1163页

作者： Yi Wang Guang-jie Song Ping Shen jian-zhong He Da-xian Zhang jian-xun Fu Center for Advanced Solidification Technology(CAST) School of Materials Science and EngineeringState Key Laboratory of Advanced Special SteelShanghai UniversityShanghai200444China State Key Laboratory of Baiyunebo Rare Earth Resources Research and Comprehensive Utilization Baotou014030Inner MongoliaChina Inner Mongolia Baotou Steel Union Co. Ltd.Baotou014030Inner MongoliaChina

Submerged entry nozzle(SEN)clogging is a major problem affecting the production quality of rare earth steel,and finding a suitable refractory outlet can significantly reduce production *** explore the relationship between refractory composition and interface interaction,unprotected coated Al_(2)O_(3)–MgO refractories and SiO2-coated Al_(2)O_(3)–MgO refractories were added to rare earth high-carbon heavy rail steel under laboratory conditions,and the Al_(2)O_(3)–MgO refractory was found to be more *** results show that,from the epoxy resin side to the refractory side,the contour of the refractory interface reaction layer can be divided into two main layers:an iron-rich reaction layer and an iron-poor reaction *** based on the spherical model suggest that the adhesion force is proportional to the size of the refractory particles and inclusions,and the same result applies to the surface *** the inclusions at a smaller size has a specific effect on alleviating the erosion of *** with the erosion mechanism of Al_(2)O_(3)–MgO refractories,the interface reaction mechanism between Al_(2)O_(3)–MgO refractories and molten steel was proposed,which provides ideas for solving SEN clogging.

关键词： Rare earth high-carbon heavy rail steel Al_(2)O_(3)-MgO refractory Adhesion Surface tension Interface interaction

On the Quantum Cohomology of Blow-ups of Four-dimensional Quadrics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第1期40卷 313-328页

作者： jian xun HU Hua Zhong KE Chang Zheng LI Lei SONG School of Mathematics Sun Yat-sen UniversityGuangzhou 510275P.R.China

We propose a conjecture relevant to Galkin’s lower bound conjecture,and verify it for the blow-ups of a four-dimensional quadric at a point or along a projective *** also show that Conjecture O holds in these two cases.

关键词： Quantum cohomology blow-up quadric hypersurface

Mechanical and thermoelectric properties in Te-rich Ag_(2)(Te,S)metaphases

在线全文

学校读者我要写书评

暂无评论

Journal of Materiomics 2024年第3期10卷 543-551页

作者： Yumeng Wang Pengfei qiu Shiqi Yang Zhiqiang Gao Lidong Chen xun Shi State Key Laboratory of High Performance Ceramics and Superfine Microstructure Shanghai Institute of CeramicsChinese Academy of SciencesShanghai200050China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing100049China State Key Laboratory of Metal Matrix Composites School of Materials Science and EngineeringShanghai Jiao Tong UniversityShanghai200240China

Ductile Ag_(2)(Te,S)pseudobinary compounds have attracted great attention in thermoelectric community since they can be fabricated into high-performance flexible and hetero-shaped thermoelectric ***,in spite of the numerous studies,the‘brittleeductile’transition boundary in Ag_(2)(Te,S)is still *** this work,a series of Te-rich Ag_(2)(Te,S)pseudobinary compounds have been *** structure characterizations confirm they belong to the new-concept of *** systematically investigation on the mechanical properties demonstrate that the‘brittl-eductile’transition boundary appears around x=*** good ductility is observed in the Te-rich Ag_(2)Te_(1-x)S_(x)crystalizing in the Ag_(2)Te room-temperature monoclinic structure and high-temperature cubic structure,which are thought to be brittle ***,Ag content is found to be a very critical parameter determining the ductility of Te-rich Ag_(2)Te_(1-x)S_(x).Very slight Ag-deficiency can greatly deteriorate the *** ther-moelectric properties of these ductile Te-rich Ag_(2)Te_(1-x)S_(x)pseudobinary compounds are investigated.A maximum thermoelectric figure-of-merit of 0.6 is obtained for Ag_(2)Te_(0.9)S_(0.1)at 600 *** work sheds light on the future investigation of Ag_(2)(Te,S)pseudobinary compounds.

关键词： Thermoelectric Ductility Ag_(2)S Mechanical property