检索结果-南通市图书馆

Opto-Electronic Advances 2024年第3期7卷 26-34页

作者： Yahui liu Shunda Qiao Chao Fang Ying He Haiyue Sun jian liu Yufei Ma National Key Laboratory of Science and Technology on Tunable Laser Harbin Institute of TechnologyHarbin 150000China Zhengzhou Research Institute Harbin Institute of TechnologyZhengzhou 450000China Advanced Microscopy and Instrumentation Research Center School of Instrumentation Science and EngineeringHarbin Institute of TechnologyHarbin 150080China.

A highly sensitive light-induced thermoelectric spectroscopy(LITES)sensor based on a multi-pass cell(MPC)with dense spot pattern and a novel quartz tuning fork(QTF)with low resonance frequency is reported in this *** erbi-um-doped fiber amplifier(EDFA)was employed to amplify the output optical power so that the signal level was further *** optical path length(OPL)and the ratio of optical path length to volume(RLV)of the MPC is 37.7 m and 13.8 cm^(-2),respectively.A commercial QTF and a self-designed trapezoidal-tip QTF with low frequency of 9461.83 Hz were used as the detectors of the sensor,*** target gas selected to test the performance of the system was acetylene(C2H2).When the optical power was constant at 1000 mW,the minimum detection limit(MDL)of the C2H2-LITES sensor can be achieved 48.3 ppb when using the commercial QTF and 24.6 ppb when using the trapezoid-al-tip *** improvement of the detection performance by a factor of 1.96 was achieved after replacing the commer-cial QTF with the trapezoidal-tip QTF.

关键词： light-induced thermoelectric spectroscopy quartz tuning fork multi-pass cell gas sensing

Quantitative characterizations of anisotropic dynamic properties in organic-rich shale with different kerogen content

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 855-865页

作者： jian-Yong Xie Yan-Ping Fang Xing-Hua Wu jian'er Zhao Jun-cheng Dai Jun-Xing Cao Ji-Xin Deng State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation Chengdu University of TechnologyChengdu610059SichuanChina Key Lab of Earth Exploration&Information Techniques of Ministry of Education Geophysical InstituteChengdu University of TechnologyChengdu610059SichuanChina PetroChina Southwest Oil&Gasfield Company Chengdu610017SichuanChina

Understanding the quantitative responses of anisotropic dynamic properties in organic-rich shale with different kerogen content(KC)is of great significance in hydrocarbon exploration and *** controlled experiments with a single variable is challenging for natural shales due to their high variations in components,diagenesis conditions,or pore *** employed the hot-pressing technique to construct 11 well-controlled artificial shale with varying *** artificial shale samples were successive machined into prismatic shape for ultrasonic measurements along different *** revealed bedding perpendicular P-wave velocities are more sensitive to the increasing KC than bedding paralleling velocities due to the preferential alignments of *** elastic stiffnesses except C_(13)are generally decreasing with the increasing KC,the variation of C_(1) and C_(33)on kerogen content are more sensitive than those of C_(44)and C_(66).Apparent dynamic mechanical parameters(v and E)were found to have linear correlation with the true ones from complete anisotropic equations independent of KC,which hold value towards the interpretation of well logs consistently across formations,Anisotropic mechanical parameters(ΔE and brittlenessΔB)tend to decrease with the reducing KC,withΔB showing great sensitivity to KC *** the range of low KC(10%)shale,compilation of data from natural organic rich-shales globally verified the similar systematic relationships that can be empirically used to predict the fraction of KC in shales.

关键词： Elastic properties Organic shale Anisotropy Kerogen content Physical modeling

HUNK inhibits cargo uptake and lysosomal traffic in the caveolar pathway via the AGAP3/ARF6

在线全文

学校读者我要写书评

暂无评论

Science Bulletin 2024年第2期69卷 173-178页

作者： Siyuan jiang Xiaoqi Han Tihui liu Ying He Zidong Zhao Tongfeng liu Shuwen cheng Jihang Zhang Liqiang Duan Yajuan liu Tianyou cheng Yong liu Qinong Ye Shan Gao Zhongda Hospital Medical SchoolAdvanced Institute for Life and HealthSoutheast UniversityNanjing 20096China Medical School of Guizhou University Guiyang 550025China Shanxi Academy of Advanced Research and Innovation Taiyuan 030032China Zhongda Hospital School of Life Sciences and TechnologyAdvanced Institute for Life and HealthSoutheast UniversityNanjing 210096China Nanjing University Medical School Nanjing 210046China Hubei Key Laboratory of Cell Homeostasis College of Life SciencesTaiKang Center for Life and Medical SciencesWuhan UniversityWuhan 430072China Department of Medical Molecular Biology Beijing Institute of BiotechnologyCollaborative Innovation Center for Cancer MedicineBeijing 100850China

Endocytosis is a crucial cellular process that takes up cargos by enclosing them in membrane-bound vesicles,and transports cargos to different parts of the cell,such as the lysosomes[1].Endocytosis is classified into several mechanistically and morphologically pathways,including clathrin-mediated endocytosis(CME)and caveolae-mediated endocytosis(CavME)[1,2].

关键词： endocytosis cargo uptake

Investigation of stress distribution and damage behavior caused by forced installation of a composite bolted joint with a hole-location error

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第1期37卷 201-217页

作者： Chinan liu Yuan LI Yi cheng An’an ZHAO Kunpeng DU Yue SHI Ximing LI Hui cheng School of Mechanical Engineering Northwestern Polytechnical UniversityXi’an 710072China AVIC Xi’an Aircraft Industry Group Company LTD Xi’an 710089China

In this paper,the influence of forced installation caused by a hole-location error on the 3D stress distribution and damage of a composite bolted joint is *** analytical model of stress distributed on composite holes is promoted,in view of non-uniform extrusion caused by forced *** first,non-uniform extrusion of the hole edge caused by forced installation is *** to the contact state,expression of hole deformation is ***,based on Hertz theory,the maximum extrusion load is obtained with help of deformation *** constructing an elastic foundation beam model,3D stress distributed on a hole could be analyzed according to the extrusion ***,stress distribution predicted by the above analytical method is compared with that provided by FE considering composite ***,a forced installation experiment is carried out to analyze the damage distribution of the *** show that a central-symmetrically distributed stress is introduced by the hole-location *** an increment of the error,strength of composite decreases due to extrusion ***,stress presents a concave distribution on the *** the hole-location error exceeding 3%,stress decreases gradually due to failure of *** of holes does not exhibit a centrosymmetric *** damage is mainly distributed on the entrance of the hole at the lower sheet.

关键词： Hole-location error Composite joint Forced installation Stress distribution Damage

Phenylalanine deprivation inhibits multiple myeloma progression by perturbing endoplasmic reticulum homeostasis

在线全文

学校读者我要写书评

暂无评论

Acta Pharmaceutica Sinica B 2024年第8期14卷 3493-3512页

作者： Longhao cheng Xiaoxue Wang Aijun liu Ying Zhu Hu cheng jiangling Yu Lili Gong Honglin liu Guolin Shen Lihong liu Institute of Clinical Medical Sciences ChinaeJapan Friendship HospitalCapital Medical UniversityBeijing 100029China Department of Pharmacy ChinaeJapan Friendship HospitalBeijing 100029China Beijing Chao-Yang Hospital Capital Medical UniversityBeijing 100020China Institute of Chemicals Safety Chinese Academy of Inspection and QuarantineBeijing 100020China

Amino acid metabolic remodeling is a hallmark of cancer,driving an increased nutritional demand for amino *** acids are pivotal for energetic regulation,biosynthetic support,and homeostatic maintenance to stimulate cancer ***,the role of phenylalanine in multiple myeloma(MM)remains ***,we demonstrate that phenylalanine levels in MM patients are decreased in plasma but elevated in bone marrow(BM)*** the treatment,phenylalanine levels increase in plasma and decrease in *** suggests that changes in phenylalanine have diagnostic value and that phenylalanine in the BM microenvironment is an essential source of nutrients for MM *** requirement for phenylalanine by MM cells exhibits a similar *** phenylalanine utilization suppresses MM cell growth and provides a synergistic effect with Bortezomib(BTZ)treatment in vitro and murine ***,phenylalanine deprivation induces excessive endoplasmic reticulum stress and leads to MM cell apoptosis through the ATF3eCHOPeDR5 *** with ATF3 significantly affects phenylalanine deprivation *** conclusion,we have identified phenylalanine metabolism as a characteristic feature of MM metabolic *** is necessary for MM proliferation,and its aberrant demand highlights the importance of lowphenylalanine diets as an adjuvant treatment for MM.

关键词： Multiple myeloma Phenylalanine Amino acid metabolism Nutrient deprivation Cancer therapy Endoplasmic reticulum stress ATF3 Apoptosis

Environmental benefits and farmers' adoption of winter cover crops in the North China Plain

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Pedosphere 2024年第1期34卷 159-169页

作者： Shufang GUO Yitao ZHANG Limei ZHAI jian liu Hongyuan WANG Hongbin liu State Key Laboratory of Efficient Utilization of Arid and Semi-arid Arable Land in Northern China Key Laboratory of Nonpoint Source Pollution ControlMinistry of Agriculture and Rural AffairsInstitute of Agricultural Resources and Regional PlanningChinese Academy of Agricultural SciencesBeijing 100081China Institute of Agricultural Environment and Resources Yunnan Academy of Agricultural SciencesKunming 650205China Shandong Yucheng Agro-ecosystem National Observation Research Station Key Laboratory of Ecosystem Network Observation and ModelingInstitute of Geographic Sciences and Natural Resources ResearchChinese Academy of SciencesBeijing 100101China The Norwegian Institute of Bioeconomy Research(NIBIO) Akershus 1431Norway

The introduction of cover crops into monoculture systems to improve soil health has been widely adopted worldwide. However, little is known about the environmental risks and application prospects of different cover crops in spring maize(Zea mays L.) monocultures proposed in the North China Plain. A pot experiment was conducted to evaluate the effects of different winter cover crops on subsequent maize yield, soil fertility, and environmental risks of nitrogen(N) loss, and a questionnaire survey was conducted to examine factors influencing farmers' willingness to adopt cover crops in the North China Plain. Based on the same fertilization regime during the maize growing period, four winter cover crop treatments were set up, including bare fallow, hairy vetch(Vicia villosa Roth.), February orchid(Orychophragmus violaceus), and winter oilseed rape(Brassica campestris L.). The results indicated that winter cover crops significantly increased subsequent maize yield and soil organic carbon, total N, and microbial biomass carbon and N compared with the bare fallow *** incorporation of cover crops led to a negligible increase in nitrous oxide(N_(2)O) emissions and had a very limited effect on ammonia(NH_(3)) *** incorporation of February orchid and winter oilseed rape decreased nitrate leaching compared with the hairy vetch treatment in the maize growing *** N losses via N_(2)O and NH_(3) emissions and N leaching accounted for 71%–84% of the N surplus. However, yield increase and environmental benefits were not the main positive factors for farmers to accept cover crops. Financial incentive was rated by 83.9% of farmers as an “extremely important” factor, followed by other costs, when considering winter cover cropping. These results indicate that the environmental benefits depend on the type of cover crop. Maintaining high levels of soil fertility and maize yield, providing sufficient subsidies, and encouraging large-area cultivation of cover crops

关键词： cover crop N leaching NH_(3)emission N_(2)O emission spring maize willingness to accept

What benefit can be obtained from magnetic resonance imaging diagnosis with artificial intelligence in prostate cancer compared with clinical assessments?

在线全文

学校读者我要写书评

暂无评论

Military Medical Research 2024年第2期11卷 268-286页

作者： Li-Tao Zhao Zhen-Yu liu Wan-Fang Xie Li-Zhi Shao jian Lu Jie Tian jian-Gang liu School of Engineering Medicine Beihang UniversityBeijing 100191China School of Biological Science and Medical Engineering Beihang UniversityBeijing 100191China CAS Key Laboratory of Molecular Imaging Institute of AutomationBeijing 100190China University of Chinese Academy of Sciences Beijing 100080China Department of Urology Peking University Third HospitalPeking UniversityBeijing 100191China Key Laboratory of Big Data‑Based Precision Medicine(Beihang University) Ministry of Industry and Information Technology of the People's Republic of ChinaBeijing 100191China Beijing Engineering Research Center of Cardiovascular Wisdom Diagnosis and Treatment Beijing 100029China

The present study aimed to explore the potential of artificial intelligence(AI)methodology based on magnetic resonance(MR)images to aid in the management of prostate cancer(PCa).To this end,we reviewed and summarized the studies comparing the diagnostic and predictive performance for PCa between AI and common clinical assessment methods based on MR images and/or clinical characteristics,thereby investigating whether AI methods are generally superior to common clinical assessment methods for the diagnosis and prediction fields of ***,we found that,in the included studies of the present study,AI methods were generally equal to or better than the clinical assessment methods for the risk assessment of PCa,such as risk stratification of prostate lesions and the prediction of therapeutic outcomes or PCa *** particular,for the diagnosis of clinically significant PCa,the AI methods achieved a higher summary receiver operator characteristic curve(SROC-AUC)than that of the clinical assessment methods(0.87 vs.0.82).For the prediction of adverse pathology,the AI methods also achieved a higher SROC-AUC than that of the clinical assessment methods(0.86 vs.0.75).Second,as revealed by the radiomics quality score(RQS),the studies included in the present study presented a relatively high total average RQS of 15.2(11.0–20.0).Further,the scores of the individual RQS elements implied that the AI models in these studies were constructed with relatively perfect and standard radiomics processes,but the exact generalizability and clinical practicality of the AI models should be further validated using higher levels of evidence,such as prospective studies and open-testing datasets.

关键词： Clinically significant prostate cancer Adverse pathology Radiomics quality score Artificial intelligence Magnetic resonance imaging

Microstructures and mechanical properties of laser-directed energy deposited CrCoNi medium-entropy alloy

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3286-3300页

作者： Wen-Jie Zhao Chang-Yu liu Peng-cheng Che Zhi-Liang Ning Hong-Bo Fan jian-Fei Sun Yong-jiang Huang Alfonso H.W.Ngan National Key Laboratory for Precision Hot Processing of Metals Harbin Institute of TechnologyHarbin 150001China Space Environment Simulation Research Infrastructure Harbin Institute of TechnologyHarbin 150001China Department of Mechanical Engineering The University of Hong KongHong Kong 999077China

The distinctive intrinsic heat treatment(IHT)originating from cyclic reheating in the laser-directed energy deposition(LDED) has attracted growing attention in recent *** this investigation,simulations and experimental characterizations were performed to examine the impact of IHT on the micros true ture and mechanical properties of LDED-fabricated CrCoNi medium-entropy alloy(MEA).The results show that the intensity of the IHT is proportional to the utilized laser energy density(LED).As the LED increased,significant dynamic recrystallization and grain refinement occurred within the alloy due to the enhanced intensity of ***,the high LED leads to severe hot cracking within the as-built MEA,resulting in inferior *** decreasing LED,the hot cracking was effectively ***,low LED weakened the intensity of IHT and consequently inhibited kinetic conditions of dynamic recrystallization,resulting in a heterogeneous grain structure characterized by multi-scale-sized *** structure provides significant hetero-deformation-induced hardening during plastic deformation,enabling the alloy to have a sustainable work-hardening *** expect that this work will have implications in taking full advantage of the unique IHT of the LDED process to fabricate ME As with excellent metallurgical quality and mechanical performance.

关键词： Intrinsic heat treatment Laser-directed energy deposition CrCoNi MEA Dynamic recrystallization Heterogeneous grain structure

Graphene from microwave-initiated upcycling of waste polyethylene for electrocatalytic reduction of chloramphenicol

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第4期35卷 187-192页

作者： Qiang Cao Xue-Feng cheng Jia Wang Chang Zhou liu-Jun Yang Guan Wang Dong-Yun Chen Jing-Hui He jian-Mei Lu College of Chemistry Chemical Engineering and Materials ScienceCollaborative Innovation Center of Suzhou Nano Science and TechnologySoochow UniversitySuzhou 215123China

Waste polyolefin plastics, accounting for 50% of all plastic waste, represent a tremendously unexploited carbon source. Efficiently upcycling polyolefin waste into value-added carbon materials for waste water treatment avoiding using noble metals is challenging but economically and environmentally sustainable. In this work, MAX-Ti_(3)AlC_(2) supported Fe selectively catalyzes polyolefin into few-layered graphene in 5 min under microwave treatment. Graphene and MAX supported Fe(Fe@MLC) can completely(99.9%)degrade chloramphenicol(CAP) within 60 min, retain robust after 10 cycles and work efficiently at a wide p H range(3.87–13.03), avoiding the usage of noble metal. Moreover, the electrochemical active surface area(ECSA) of Fe@MLC is 2.7 times higher than that of commercial Pt/C. This work provides a cheap and efficient catalyst that promotes deconstruction of plastic wastes and indirectly degrades antibiotics thereby realizes the treatment of waste water with waste plastic.

关键词： Microwave Ti_(3)AlC_(2) Electrochemistry Dechlorination Chloramphenicol

Numerical simulation study on the mold strength of magnetic mold casting based on a coupled electromagnetic-structural method

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第5期21卷 577-587页

作者： Wei-li Peng jian-hua Zhao cheng Gu Ya-jun Wang College of Materials Science and Engineering Chongqing UniversityChongqing 400045China National Engineering Research Center for Magnesium Alloys Chongqing UniversityChongqing 400044China National Key Laboratory of Advanced Casting Technologies Chongqing UniversityChongqing 400044China

The properties of the magnetic mold in magnetic mold casting directly determine the quality of the final cast *** this study,the magnetic mold properties in magnetic mold casting,were studied utilizing a coupled electromagnetic-structural method through numerical *** study investigated key factors including equivalent stress,the distribution of tensile and compressive stresses,and the area ratio of tensile *** compared molds made entirely of magnetic materials with those made partially of magnetic *** results indicate that as current increases from 4 A to 8 A,both the initial magnetic mold and the material-replaced magnetic mold initially show an increasing trend in equivalent stress,tensile-compressive stress,and the area ratio of tensile stress,peaking at 6 A before *** material replacement,the area ratio of tensile stress at 6 A decreases to 19.84%,representing a reduction of 29.72%.Magnetic molds comprising a combination of magnetic and non-magnetic materials exhibit sufficient strength and a reduced area ratio of tensile stress compared to those made entirely from magnetic *** study provides valuable insights for optimizing magnetic mold casting processes and offers practical guidance for advancing the application of magnetic molds.

关键词： magnetic mold casting coupled electromagnetic-structural method numerical simulation stress analysis