检索结果-南通市图书馆

Nuclear Science and Techniques 2019年第5期30卷 59-69页

作者： Hyeong-Yeon Lee Seok-Kwon Son Min-Gu Won ji-young jeong Korea Atomic Energy Research Institute National Fusion Research Institute School of Mechanical Engineering Sungkyunkwan University

This study investigates the risks of non-conservative piping design according to ASME B31.1 for hightemperature piping subjected to long-term operation at high temperature in a creep regime based on a sensitivity analysis of the hold time. Design evaluations of hightemperature piping were conducted over a range of hold times in the creep regime according to ASME B31.1,which implicitly considers the creep effects, and the French high-temperature design code of the RCC-MRx, which explicitly considers the creep effects. Conservatisms were quantified among the codes in terms of the hold times. In the case of B31.1, the design evaluation results do not change depending on the hold time at high temperature,whereas in the case of RCC-MRx, they do. It was shown that the design limits of RCC-MRx were exceeded when the hold time exceeded certain values, whereas those of B31.1 were satisfied regardless of the hold times. Thus, the design evaluations according to B31.1 did not consistently yield conservative results and might lead to non-conservative results in the case of long-term operations in the creep range.

关键词： ASME B31.1 Creep Hold time Hightemperature piping RCC-MRx Sensitivity analysis

Disordered Structure and Reversible Phase Transformation from K-Birnessite to Zn-Buserite Enable High-Performance Aqueous Zinc-lon Batteries

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 100-111页

作者： Nibagani Naresh Suyoon Eom Sang Jun Lee Su Hwan jeong ji-Won Jung young Hwa Jung Joo-Hyung Kim Department of Materials Engineering and Convergence Technology Gyeongsang National University(GNU)Jinju 52828South Korea School of Material Science and Engineering(Ceramic Engineering) Gyeongsang National University(GNU)Jinju 52828South Korea School of Materials Science and Engineering University of Ulsan(UOU)Ulsan 44776South Korea PLS-ⅡBeamline Division Pohang Accelerator Laboratory(PAL)Pohang 37673South Korea

The layeredδ-MnO_(2)(dMO)is an excellent cathode material for rechargeable aqueous zinc-ion batteries owing to its large interlayer distance(~0.7 nm),high capacity,and low cost;however,such cathodes suffer from structural degradation during the long-term cycling process,leading to capacity *** this study,a Co-doped dMO composite with reduced graphene oxide(GC-dMO)is developed using a simple cost-effective hydrothermal *** degree of disorderness increases owing to the hetero-atom doping and graphene oxide *** is demonstrated that layered dMO and GC-dMO undergo a structural transition from K-birnessite to the Zn-buserite phase upon the first discharge,which enhances the intercalation of Zn^(2+)ions,H_(2)O molecules in the layered *** GC-dMO cathode exhibits an excellent capacity of 302 mAh g^(-1)at a current density of 100 mAg^(-1)after 100 cycles as compared with the dMO cathode(159 mAhg^(-1)).The excellent electrochemical performance of the GC-dMO cathode owing to Co-doping and graphene oxide sheets enhances the interlayer gap and disorderness,and maintains structural stability,which facilitates the easy reverse intercalation and de-intercalation of Zn^(2+)ions and H_(2)O ***,GC-dMO is a promising cathode material for large-scale aqueous ZIBs.

关键词： aqueous zinc-ion batteries birnessite buserite disordered structure phase transformation

The SARS-CoV-2 spike protein induces lung cancer migration and invasion in a TLR2-dependent manner

在线全文

学校读者我要写书评

暂无评论

Cancer Communications 2024年第2期44卷 273-277页

作者： Mi-jeong Kim ji young Kim ji Hye Shin Juhee Son Yeeun Kang Soo-Kyung jeong Duk-Hwan Kim Kyun-Hwan Kim Eunyoung Chun Ki-young Lee Department of Immunology Samsung Biomedical Research InstituteSungkyunkwan University School of MedicineSuwonRepublic of Korea Research and Development Center CHA Vaccine InstituteSeongnam-siRepublic of Korea Department of Molecular Cell Biology Sungkyunkwan University School of MedicineSuwonRepublic of Korea Department of Precision Medicine Sungkyunkwan University School of MedicineSuwonRepublic of Korea Department of Health Sciences and Technology Samsung Advanced Institute for Health Sciences&TechnologySamsung Medical CenterSungkyunkwan UniversitySeoulRepublic of Korea

Dear editor,Severe acute respiratory syndrome coronavirus2(SARS-CoV-2)infection can lead to severe outcomes in patients with cancer[1].It has been reported that patients with lung cancers disproportionately manifest severe COVID-19 with a high rate of hospitalization and death[2].Notably,the SARS-CoV-2 Spike(S)protein can induce hyper-inflammation in both epithelial cells and macrophages through toll-like receptor(TLR)1/TLR2 or TLR2/6-dependent nuclear factor-kappaB(NF-κB)path-way[3].However,molecular and cellular evidence on whether the SARS-CoV-2 virus affects the severity of lung cancer patients through TLR1/2 or TLR2/6 signaling remains unclear.

关键词： lung TLR2 invasion

Multiphase cooperation for multilevel strain accommodation in a single-crystalline BiFeO3 thin film

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第9期33卷 57-66页

作者： Wooseon Choi Bumsu Park Jaejin Hwang Gyeongtak Han Sang-Hyeok Yang Hyeon Jun Lee Sung Su Lee ji young Jo Albina Y.Borisevich Hu young jeong Sang Ho Oh Jaekwang Lee young-Min Kim Department of Energy Science Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Samsung Electronics Hwaseong 18448Republic of Korea Department of Physics Pusan National UniversityBusan 46241Republic of Korea LG Energy Solution Daejeon 34122Republic of Korea Department of Materials Science and Engineering Kangwon National UniversityRepublic of Korea School of Materials Science and Engineering Gwangju Institute of Science and Technology(GIST)Gwangju 61005Republic of Korea Center for Nanophase Materials Sciences Oak Ridge National LaboratoryTN 37831USA Graduate School of Semiconductor Materials and Devices Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy Engineering KENTECH Institute for Energy Materials and DevicesKorea Institute of Energy Technology(KENTECH)Naju 58330Republic of Korea

The functionalities and diverse metastable phases of multiferroic BiFeO3(BFO)thin films depend on the misfit *** mixed phase-induced strain relaxation in multiphase BFO thin films is well known,it is unclear whether a singlecrystalline BFO thin film can accommodate misfit strain without the involvement of its ***,understanding the strain relaxation behavior is key to elucidating the lattice strain–property *** this study,a correlative strain analysis based on dark-field inline electron holography(DIH)and quantitative scanning transmission electron microscopy(STEM)was performed to reveal the structural mechanism for strain accommodation of a single-crystalline BFO thin *** nanoscale DIH strain analysis results indicated a random combination of multiple strain states that acted as a primary strain relief,forming irregularly strained *** STEM-based bond length measurement of the corresponding strained nanodomains revealed a unique strain accommodation behavior achieved by a statistical combination of multiple modes of distorted structures on the unit-cell *** globally integrated strain for each nanodomain was estimated to be close to􀀀1.5%,irrespective of the nanoscale strain states,which was consistent with the fully strained BFO film on the SrTiO3 *** functional theory calculations suggested that strain accommodation by the combination of metastable phases was energetically favored compared to single-phase-mediated *** discovery allows a comprehensive understanding of strain accommodation behavior in ferroelectric oxide films,such as BFO,with various low-symmetry polymorphs.

关键词： BiFeO_(3) scanning transmission electron microscopy electron holography multiferroic material strain mapping

Bone-targeted lipoplex-loaded three-dimensional bioprinting bilayer scaffold enhanced bone regeneration

在线全文

学校读者我要写书评

暂无评论

Regenerative Biomaterials 2024年第4期3卷 138-148页

作者： Woo-jin Kim jeong-Hyun Ryu ji Won Kim Ki-Tae Kim Hye-Rim Shin Heein Yoon Hyun-Mo Ryoo young-Dan Cho Department of Molecular Genetics School of Dentistry and Dental Research InstituteSeoul National UniversitySeoul03080Republic of Korea Department of Periodontology School of Dentistry and Dental Research InstituteSeoul National University and Seoul National University Dental HospitalSeoul03080Republic of Korea

Clinical bone-morphogenetic protein 2(BMP2)treatment for bone regeneration,often resulting in complications like soft tissue inflammation and ectopic ossification due to high dosages and non-specific delivery systems,necessitates research into improved biomaterials for better BMP2 stability and *** tackle this challenge,we introduced a groundbreaking bone-targeted,lipoplex-loaded,three-dimensional bioprinted bilayer scaffold,termed the polycaprolactone-bioink-nanoparticle(PBN)scaffold,aimed at boosting bone *** encapsulated BMP2 within the fibroin nanoparticle based lipoplex(Fibroplex)and functionalized it with DSS6 for bone tissue-specific targeting.3D printing technology enables customized,porous PCL scaffolds for bone healing and soft tissue growth,with a two-step bioprinting process creating a cellular lattice structure and a bioink grid using gelatin-alginate hydrogel and DSS6-Fibroplex,shown to support effective nutrient exchange and cell growth at specific pore *** PBN scaffold is predicted through in silico analysis to exhibit biased BMP2 release between bone and soft tissue,a finding validated by in vitro osteogenic differentiation *** PBN scaffold was evaluated for critical calvarial defects,focusing on sustained BMP2 delivery,prevention of soft tissue cell infiltration and controlled fiber membrane pore size in *** PBN scaffold demonstrated a more than eight times longer BMP2 release time than that of the collagen sponge,promoting osteogenic differentiation and bone regeneration in a calvarial defect *** findings suggest that the PBN scaffold enhanced the local concentration of BMP2 in bone defects through sustained release and improved the spatial arrangement of bone formation,thereby reducing the risk of heterotopic ossification.

关键词： 3D bioprinting bone-targeting lipoplex BMP2 bone regeneration

Direct 4D printing of functionally graded hydrogel networks for biodegradable,untethered,and multimorphic soft robots

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第2期6卷 407-416页

作者： Soo young Cho Dong Hae Ho Sae Byeok Jo jeong Ho Cho Department of Chemical and Biomolecular Engineering Yonsei UniversitySeoul 03722Republic of Korea Department of Mechanical Engineering Virginia TechBlacksburgVA 24061United States of America School of Chemical Engineering Sungkyunkwan UniversitySuwon 16419Republic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwon 16419Republic of Korea

Recent advances in functionally graded additive manufacturing(FGAM)technology have enabled the seamless hybridization of multiple functionalities in a single *** robotics can become one of the largest beneficiaries of these advances,through the design of a facile four-dimensional(4D)FGAM process that can grant an intelligent stimuli-responsive mechanical functionality to the printed ***,we present a simple binder jetting approach for the 4D printing of functionally graded porous multi-materials(FGMM)by introducing rationally designed graded multiphase feeder *** graded cross-linking agents gradually form stable porous network structures within aqueous polymer particles,enabling programmable hygroscopic deformation without complex mechanical ***,a systematic bed design incorporating additional functional agents enables a multi-stimuli-responsive and untethered soft robot with stark stimulus *** biodegradability of the proposed 4D-printed soft robot further ensures the sustainability of our approach,with immediate degradation rates of 96.6%within 72 *** proposed 4D printing concept for FGMMs can create new opportunities for intelligent and sustainable additive manufacturing in soft robotics.

关键词： intelligent and sustainable additive manufacturing multi-material four-dimensional printing untethered soft robot multi-stimuli-responsive soft robot biodegradable soft robotics

Combined Insights from Leachate Structure and Microstructure Characteristics for Eating Quality of Convenience Rice Processed by Super-Heated and Pressurized Steam Technologies

在线全文

学校读者我要写书评

暂无评论

Rice science 2024年第4期31卷 475-488,I0035,I0036页

作者： Mingyo HA Hyo-young jeong Ju Hun LEE Hyun-Jung CHUNG Division of Food and Nutrition Chonnam National UniversityGwangju 61186South Korea Department of Biotechnology College of Life Sciences and BiotechnologyKorea UniversitySeoul 02841South Korea Division of Food Science&Culinary Arts Shinhan UniversityGyeonggi 11644South Korea

Convenience rice has become widely popular due to its easy availability for cooking. This study investigated the starch structure and composition of leachate and the microstructure of reheated convenience rice using novel processing technologies: super-heated steaming(SHS), auto-electric cooking(AEC), and pressurized-steam cooking(PSC). Additionally, the effect of two different target water contents(58% and 63%) was also evaluated. The PSC_63% sample had the highest total solids and amylopectin amount in the leachate. The amylopectin amount in the leachate differed significantly based on the targeted water content. Morphological characterization revealed that the swelling of starch and the coated layer on the surface of rice grains were most pronounced in the PSC_63% sample due to the pressure processing. The textural hardness of the AEC_58% sample was much higher than that of the other samples. The PSC_63% sample had the highest textural adhesiveness value, which can be attributed to the highest amylopectin amount in the leachate. Sensory characterization showed that the PSC_63% sample had the highest glossiness, whiteness, moistness, and overall acceptability. The principal component analysis score plots presented substantial differences in the leachate and textural and sensory characteristics of reheated convenience rice among the different processing technologies.

关键词： reheated convenience rice starch structure leachate multi-scale structure eating quality processing technology

Flexible thermocouple using a thermoelectric graphene fiber with a seamless junction

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第5期172卷 15-22页

作者： Seungwon Kim Soomook Lim Myeong Hee jeong Wonjoon Kim Seunghyun Baik ji Won Suk School of Mechanical Engineering Sungkyunkwan UniversitySuwonGyeonggi-do 16419Republic of Korea Department of Smart Fab.Technology Sungkyunkwan UniversitySuwonGyeonggi-do 16419Republic of Korea SKKU Advanced Institute of Nanotechnology(SAINT) Sungkyunkwan UniversitySuwonGyeonggi-do 16419Republic of Korea

Temperature is an important physical variable that indicates the condition of the human body and artificial *** wearable applications require the development of temperature sensors with different form *** this study,a fiber-shaped thermoelectric temperature sensor is fabricated using a continuous graphene fiber whose two halves possess different reduction states.A seamless junction is formed by partially reducing a wet-spun graphene oxide fiber with hydroiodic acid(HI)solutions of different ***-half of the fiber is mildly reduced with 0.97 wt%HI,while the other half is highly reduced with 30.6 wt%*** different reduction states of the graphene composite fiber result in different Seebeck coefficients,allowing for the fabrication of a fiber-shaped graphene thermocou-ple without any laborious *** flexible graphene thermocouple exhibits high sensitivity with a thermopower of 12.5μV K^(-1)in the temperature range of room temperature to∼70℃.Furthermore,it exhibits high linearity with a correlation coefficient exceeding 0.995 and fast response with a time constant of 0.24 *** to its mechanical robustness and flexibility,the stand-alone graphene ther-mocouple can be knitted into a cotton fabric glove,which presents a fast response to environmental changes without any external power *** work offers a unique fabrication method for producing a high-performance,flexible thermocouple that features a seamless and clear junction without the use of additional *** alternative method eliminates the complicated assembly processes typically required for conventional thermocouples.

关键词： Graphene fiber Thermocouple Reduced graphene oxide Flexible temperature sensor Seebeck coefficient

The CUL3A–LFH1–UBC15 ubiquitin ligase complex mediates SHORT VEGETATIVE PHASE degradation to accelerate flowering at high ambient temperature

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Plant Communications 2024年第4期5卷 224-238页

作者： Suhyun jin Geummin Youn Sun young Kim Taewook Kang Hyun-young Shin ji-Yul Jung Pil Joon Seo ji Hoon Ahn Department of Life Sciences Korea UniversitySeoul 02841Republic of Korea Department of Chemistry Seoul National UniversitySeoul 08826Republic of Korea These authors contributed equally to this article.

Ambient temperature affects flowering time in plants,and the MADS-box transcription factor SHORT VEGETATIVE PHASE(SVP)plays a crucial role in the response to changes in ambient *** protein stability is regulated by the 26S proteasome pathway and decreases at high ambient temperature,but the details of SVP degradation are ***,we show that SVP degradation at high ambient temperature is mediated by the CULLIN3–RING E3 ubiquitin ligase(CRL3)complex in Arabidopsis *** identified a previously uncharacterized protein that interacts with SVP at high ambient temperature and contains a BTB/POZ *** named this protein LATE FLOWERING AT HIGH TEMPERATURE 1(LFH1).Single mutants of LFH1 or CULLIN3A(CUL3A)showed late flowering specifically at 27***1 protein levels increased at high ambient *** found that LFH1 interacts with CUL3A in the cytoplasm and is important for SVP–CUL3A complex *** in CUL3A and/or LFH1 led to increased SVP protein stability at high ambient temperature,suggesting that the CUL3–LFH1 complex functions in SVP *** E2 ubiquitin-conjugating enzymes(UBCs)using RING-BOX PROTEIN 1(RBX1),a component of the CRL3 complex,as bait identified ***15 mutants also showed late flowering at high ambient *** vitro and in vivo ubiquitination assays using recombinant CUL3A,LFH1,RBX1,and UBC15 showed that SVP is highly ubiquitinated in an ATP-dependent ***,these results indicate that the degradation of SVP at high ambient temperature is mediated by a CRL3 complex comprising CUL3A,LFH1,and UBC15.

关键词： temperature-responsiveflowering SVP CUL3 proteasomal degradation ubiquitination

Novel fabrication techniques for ultra-thin silicon based flexible electronics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第4期6卷 116-149页

作者： Ju young Lee jeong Eun Ju Chanwoo Lee Sang Min Won Ki Jun Yu School of Electrical and Electronic Engineering Yonsei University50 Yonsei-roSeodaemunguSeoul 03722Republic of Korea Department of Electrical and Computer Engineering Sungkyunkwan UniversitySuwon 16419Republic of Korea YU-Korea Institute of Science and Technology(KIST)Institute Yonsei University50Yonsei-roSeodaemun-guSeoul 03722Republic of Korea

Flexible electronics offer a multitude of advantages,such as flexibility,lightweight property,portability,and high *** unique properties allow for seamless applications to curved and soft surfaces,leading to extensive utilization across a wide range of fields in consumer *** applications,for example,span integrated circuits,solar cells,batteries,wearable devices,bio-implants,soft robotics,and biomimetic ***,flexible electronic devices have been developed using a variety of materials such as organic,carbon-based,and inorganic semiconducting ***(Si)owing to its mature fabrication process,excellent electrical,optical,thermal properties,and cost efficiency,remains a compelling material choice for flexible ***,the research on ultra-thin Si in the context of flexible electronics is studied rigorously *** thinning of Si is crucially important for flexible electronics as it reduces its bending stiffness and the resultant bending strain,thereby enhancing flexibility while preserving its exceptional *** review provides a comprehensive overview of the recent efforts in the fabrication techniques for forming ultra-thin Si using top-down and bottom-up approaches and explores their utilization in flexible electronics and their applications.

关键词： flexible electronics silicon fabrication technique top-down approach bottom-up approach