检索结果-南通市图书馆

Inflow and outflow permeability tests in a very soft clay under low stresses

在线全文

学校读者我要写书评

暂无评论

journal of Rock Mechanics and Geotechnical Engineering 2024年第8期16卷 3270-3283页

作者： j.W.s.Vargas F.A.B.Danziger F.R.Lopes T.Lunne Federal University of Rio de janeiro Rio de JaneiroBrazil Norwegian Geotechnical Institute OsloNorway

In situ inflow and outflow permeability tests with the BAT probe at sarapuíII soft clay test site are presented.A description of the BAT permeability test is provided,discussing its advantages and shortcomings,especially in the case of very soft clays under low *** pressures were monitored during probe installation and were found to be slightly lower than piezocone u2 pore pressures,consistent with the position of the *** role of filter tip saturation was investigated after the usual saturation procedure provided an unsatisfactory pore pressure response during probe *** show that the vacuum saturation procedure provides adequate response during installation and increases the reliability of the coefficient of permeability determination in early *** inflow and outflow tests yielded similar results,indicating that careful execution of the test can lead to good test repeatability regardless of the loading *** sequences of alternated inflow and outflow tests have yielded similar results,indicating that soil reconsolidation and filter clogging were negligible in the tests *** are presented concerning the relationship between index parameters and the in situ coefficient of permeability for sarapuíII clay,which plot outside the range of existing databases.

关键词： Permeability test soft clay BAT probe Inflow and outflow tests

Hybrid robust fault detection and isolation of satellite reaction wheel actuators

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Control and Decision 2024年第1期11卷 117-131页

作者： H.Abbasi Nozari s.j.sadati Rostami Paolo Castaldi silvio simani Faculty of Electrical and Computer Engineering Babol Noshirvani University of TechnologyBabolIran Department of Electrical Electronic and Information EngineeringUniversity of BolognaCesenaItaly Department of Engineering University of FerraraFerraraItaly

In this paper,a combined robust fault detection and isolation scheme is studied for satellite system subject to actuator faults,external disturbances,and parametric *** proposed methodology incorporates a residual generation module,including a bank of filters,into an intelligent residual evaluation ***,residual filters are designed based on an improved nonlinear differential algebraic approach so that they are not affected by external *** residual evaluation module is developed based on the suggested series and parallel ***,a new ensemble classification scheme defined as blended learning integrates heterogeneous classifiers to enhance the performance.A wide range of simulations is carried out in a high-fidelity satellite simulator subject to the constant and time-varying actuator faults in the presence of disturbances,manoeuvres,uncertainties,and *** obtained results demonstrate the effectiveness of the proposed robust fault detection and isolation method compared to the traditional nonlinear differential algebraic approach.

关键词： Robust fault detection and isolation reaction wheels blended learning series and parallel fault detection and isolation forms satellite attitude control system

sMILE soft X-ray Imager flight model CCD370 pre-flight device characterisation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第1期8卷 25-38页

作者： s.Parsons D.j.Hall O.Hetherington T.W.Buggey T.Arnold M.W.j.Hubbard A.Holland Centre for Electronic Imaging the Open UniversityMilton KeynesMK76AAUK

Throughout the sMILE mission the satellite will be bombarded by radiation which gradually damages the focal plane devices and degrades their *** order to understand the changes of the CCD370s within the soft X-ray Imager,an initial characterisation of the devices has been carried out to give a baseline performance *** CCDs have been characterised,the two flight devices and the flight spa *** has been carried out at the Open University in a bespo ke cleanroom measure ment *** results show that there is a cluster of bright pixels in the flight spa re which increases in size with tempe *** at the nominal ope rating tempe rature(-120℃) it is within the procure ment ***,the devices meet the specifications when ope rating at -120℃ in 6 × 6 binned frame transfer science *** se rial charge transfer inefficiency degrades with temperature in full frame *** any charge losses are recovered when binning/frame transfer is implemented.

关键词： CCD soft X-ray imager characterisation sMILE

Enabling Technologies for Autonomous Robotic systems in Manufacturing

在线全文

学校读者我要写书评

暂无评论

Transactions of Nanjing University of Aeronautics and Astronautics 2024年第4期41卷 403-431页

作者： ERDŐs Gábor ABAI Kristóf BEREGI Richárd CsEMPEsZ jános CsERTEG Tamás GODÓGábor HAjÓs Mátyás HÁY Borbála HORVÁTH Dániel HORVÁTH Gergely jUNIKIÁdám KEMÉNY Zsolt KOVÁCs András NACsA jános PANITI Imre PEDONE Gianfranco TAKÁCs Emma TIPARY Bence ZAHORÁN László VÁNCZA józsef Institute for Computer science and Control Hungarian Research Network(HUN-REN SZTAKI)BudapestHungary Department of Manufacturing science and Technology Budapest University of Technology and Economics(BME)BudapestHungary EPIC InnoLabs Nonprofit Ltd. BudapestHungary Eötvös Loránd University(ELTE) BudapestHungary

Research of autonomous manufacturing systems is motivated both by the new technical possibilities of cyber-physical systems and by the practical needs of the *** operation in semi-structured industrial environments can now be supported by advanced sensor technologies,digital twins,artificial intelligence and novel communication *** enable real-time monitoring of production processes,situation recognition and prediction,automated and adaptive(re)planning,teamwork and performance improvement by *** paper summarizes the main requirements towards autonomous industrial robotics and suggests a generic workflow for realizing such *** case studies will be presented from recent practice at HUN-REN sZTAKI in a broad range of domains such as assembly,welding,grinding,picking and placing,and *** various solutions have in common that they use a generic digital twin concept as their *** making general recommendations for realizing autonomous robotic solutions in the industry,open issues for future research will be discussed.

关键词： industrial robotics autonomy digital twin enabling technology

Complexed amino acid minerals ***-glycinate chelated minerals:Impact on the performance of old laying hens

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Animal Nutrition 2024年第1期16卷 395-408页

作者： Marcos j.B.santos Maria C.M.M.Ludke Leandro M.silva Carlos B.V.Rabello Mércia R.Barros Fabiano s.Costa Clariana s.santos jamille s.s.Wanderley Department of Animal science Rural Federal University of PernambucoRecifePEBrazil Department of Veterinary science Rural Federal University of PernambucoRecifePEBrazil

The present study was to evaluate the effect of trace minerals(Zn,Mn,and Cu)from complexed amino acid minerals(ZMCAA)and bis-glycinate chelated minerals(ZMCGly)in laying hen diets on performance,internal and external egg quality,yolk mineral deposition,intestinal morphometry,and bone *** 78 to 98 weeks of age,400 White LsL-Lite strain laying hens were distributed in a randomized design with 4 treatments with 10 replicates per *** were distributed in a 2×2 factorial arrangement using either Zn,Mn,and Cu of ZMCAA or ZMCGly source at 2 levels:low(20,20,and 3.5 mg/kg of Zn,Mn,and Cu,respectively)or high(40,40,and 7 mg/kg of Zn,Mn,and Cu,respectively).The analysis of variance was performed,and in cases where differences were observed,the means were compared using Tukey?s test(Psource and level of trace mineral supplementation had a significant impact on the performance of laying *** fed ZMCAA had higher egg production(P=0.01),egg weight(P=0.02),egg mass(P=0.01),and lower feed conversion ratio(P=0.05)compared to those fed *** ZMCAA supplementation showed higher albumen height(P=0.01),albumen weight(P=0.01),and eggshell thickness(Psition of Zn(Ps greater for hens received *** weight(P=0.04)and bone densitometry(Psmall intestine,ZMCAA resulted in longer villi(P=0.02)and shorter crypt depth(P=0.01)in the *** and ileum measurements were influenced by the level and source of trace minerals(Ps fed ZMCAA exhibited superior performance,egg quality,deposition of trace minerals in the egg yolk,and bone density compared to hens fed *** this study,older laying hens supplemented with ZMCAA at lower levels demonstrated adequate levels of supplementation.

关键词： Bis-glycinates Metal-amino acids Radiodensity Trace minerals

同方期刊数据库

Laser processing effects on Ti−45Nb alloy surface,corrosive and biocompatible properties

在线全文

学校读者我要写书评

暂无评论

Transactions of Nonferrous Metals society of China 2024年第8期34卷 2533-2551页

作者： I.CVIjOVIĆ-ALAGIĆ s.LAKETIĆ M.MOMČILOVIĆ j.CIGANOVIĆ Đ.VELjOVIĆ j.BAjAT V.KOjIĆ M.RAKIN Vinča Institute of Nuclear sciences-National Institute of thеRepublic of serbia University of BelgradeP.O.Box 52211001 BelgradeSerbia Faculty of Technology and Metallurgy University of BelgradeKarnegijeva 411120 BelgradeSerbia Oncology Institute of Vojvodina Faculty of MedicineUniversity of Novi SadPut Dr Goldmana 421204 Sremska KamenicaSerbia

The Ti−45Nb(wt.%)alloy properties were investigated in relation to its potential biomedical *** surface modification was utilized to improve its performance in biological *** a result of the laser treatment,(Ti,Nb)O scale was formed and various morphological features appeared on the alloy *** electrochemical behavior of Ti−45Nb alloy in simulated body conditions was evaluated and showed that the alloy was highly resistant to corrosion deterioration regardless of additional laser surface modification ***,the improved corrosion resistance after laser treatment was evident(the corrosion current density of the alloy before laser irradiation was 2.84×10^(−8)A/cm2,while that after laser treatment with 5 mj was 0.65×10^(−8)A/cm2)and ascribed to the rapid formation of a complex and passivating bi-modal surface oxide *** cytotoxicity and effects of the Ti−45Nb alloy laser surface modification on the MRC-5 cell viability,morphology,and proliferation were also *** Ti−45Nb alloy showed no cytotoxic ***,cells showed improved viability and adherence to the alloy surface after the laser irradiation *** highest average cell viability of 115.37%was attained for the alloy laser-irradiated with 15 *** showed that the laser surface modification can be successfully utilized to significantly improve alloy performance in a biological environment.

关键词： Ti−45Nb alloy laser surface scanning electrochemical properties biocompatibility cell morphology

同方期刊数据库

Olympic Games and 24-hour movement behaviors:A match worth making

在线全文

学校读者我要写书评

暂无评论

journal of sport and Health science 2024年第6期13卷 728-731页

作者： Mark s.Tremblay Nicholas Kuzik Markus j.Duncan Diego Augusto santos silva CHEO Research Institute OttawaON K1H 8L1Canada Department of Pediatrics University of OttawaOttawaON K1H 8L1Canada Federal University of santa Catarina FlorianopolisSanta Catarina 88040-900Brazil

*** The Olympic motto,"Faster,Higher,stronger-Together",represents the pursuit of athletic excellence,united as a global community."Excellence,respect and friendship"are the Olympic *** the motto and values are multifaceted and holistic in nature,and all-encompassing in their reach while recognizing no single entity rises above the ***,these foundational statements anchor the Olympic movement in its quest to build a better world through sport.

关键词： movement Together pursuit

Value Function Mechanism in WsNs-Based Mango Plantation Monitoring system

在线全文

学校读者我要写书评

暂无评论

Computers, Materials and Continua 2024年第3期80卷 3733-3759页

作者： sung W.-T. Isa I.G.T. Hsiao s.-j. Department of Electrical Engineering National Chin-Yi University of Technology Taichung 411030 Taiwan Department of Informatics Management Politeknik Negeri Sriwijaya Palembang 30139 Indonesia Department of Information Technology Takming University of Science and Technology Taipei City 11451 Taiwan

Mango fruit is one of the main fruit commodities that contributes to Taiwan’s income. The implementation of technology is an alternative to increasing the quality and quantity of mango plantation product productivity. In this study, a Wireless sensor Networks (“WsNs”)-based intelligent mango plantation monitoring system will be developed that implements deep reinforcement learning (DRL) technology in carrying out prediction tasks based on three classifications: “optimal,” “sub-optimal,” or “not-optimal” conditions based on three parameters including humidity, temperature, and soil moisture. The key idea is how to provide a precise decision-making mechanism in the real-time monitoring system. A value function-based will be employed to perform DRL model called deep Q-network (DQN) which contributes in optimizing the future reward and performing the precise decision recommendation to the agent and system behavior. The WsNs experiment result indicates the system’s accuracy by capturing the real-time environment parameters is 98.39%. Meanwhile, the results of comparative accuracy model experiments of the proposed DQN, individual Q-learning, uniform coverage (UC), and Naïve Bayes classifier (NBC) are 97.60%, 95.30%, 96.50%, and 92.30%, respectively. From the results of the comparative experiment, it can be seen that the proposed DQN used in the study has the most optimal accuracy. Testing with 22 test scenarios for “optimal,” “sub-optimal,” and “not-optimal” conditions was carried out to ensure the system runs well in the real-world data. The accuracy percentage which is generated from the real-world data reaches 95.45%. From the results of the cost analysis, the system can provide a low-cost system compared to the conventional system. Copyright © 2024 The Authors. Published by Tech science Press.

关键词： deep Q-network (DQN) deep reinforcement learning (DRL) Intelligent monitoring system wireless sensor networks (WsNs)

Enhanced photoluminescence of a microporous quantum dot color conversion layer by inkjet printing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第8期17卷 7717-7725页

作者： junchi Chen Qihao jin Yidenekachew.j.Donie Orlando.T.Perales Dmitry Busko Bryce.s.Richards Uli Lemmer Light Technology Institute(LTI) Karlsruhe Institute of Technology(KIT)Engesserstrasse 1376131 KarlsruheGermany Department of Chemical Engineering and Materials science University of Minnesota(UMN)421 Washington Ave.SEMinneapolisMN 55455-0132USA Institute for Microstructure Technology Karlsruhe Institute of Technology(KIT)Hermann-von-Helmholtz-Platz 176344 Eggenstein-LeopoldshafenGermany

Owing to their high color purity,tunable bandgap,and high efficiency,quantum dots(QDs)have gained significant attention as color conversion materials for high-end display ***,inkjet-printed QD pixels show great potential for realizing full-color mini/micro-light emitting diode(micro-LED)-based *** a color conversion layer,the photoluminescence intensity of QDs is limited by the insufficient absorptance of the excitation light due to the lack of *** scatterers,such as titanium dioxide microparticles,have been applied after additional surface engineering for sufficient dispersity to prevent nozzle clogging in inkjet printing *** our work,as an alternative approach,we use inkjet printing for depositing a phase separating polymer ink based on polystyrene(Ps)and polyethylene glycol(PEG).QD/polymer composite pixels with scattering micropores are *** morphology of the micropores can be tailored by the weight ratio between Ps and PEG which enables the manipulation of scattering *** the presence of the microporous structure,the photoluminescence intensity of the QD film is enhanced by 110%in drop-cast films and by 35.3%in inkjet-printed QD pixel arrays compared to the reference samples.

关键词： porous structure inkjet printing phase separation quantum dots display technology