检索结果-南通市图书馆

中国有色金属学会会刊：英文版 1998年第4期8卷 135-141页

作者： Wang, XY Zhang, YS Yan, j Yuan, HT song, DY Nankai Univ Inst New Energy Mat Chem Tianjin 300071 Peoples R China

ＩＮＴＲＯＤＵＣＴＩＯＮＮｉｃｋｅｌｈｙｄｒｏｘｉｄｅｅｌｅｃｔｒｏｄｅｓｈａｖｅｂｅｅｎｗｉｄｅｌｙｕｓｅｄａｓｐｏｓｉｔｉｖｅｅｌｅｃｔｒｏｄｅｉｎＮｉＣｄ，ＮｉＨ２ａｎｄＮｉＭＨｓｅｃｏｎｄａｒｙｂａｔ... 详细信息

ＩＮＴＲＯＤＵＣＴＩＯＮＮｉｃｋｅｌｈｙｄｒｏｘｉｄｅｅｌｅｃｔｒｏｄｅｓｈａｖｅｂｅｅｎｗｉｄｅｌｙｕｓｅｄａｓｐｏｓｉｔｉｖｅｅｌｅｃｔｒｏｄｅｉｎＮｉＣｄ，ＮｉＨ２ａｎｄＮｉＭＨｓｅｃｏｎｄａｒｙｂａｔｅｒｉｅｓ．Ｉｍｐｒｏｖｅｍｅｎｔ...

关键词： nickel hydroxide electrode electroless plating cobalt electrode performance electrochemical impedance conductivity

基于多尺度融合金字塔焦点网络的接触网零部件检测

在线全文

学校读者我要写书评

暂无评论

工程科学学报 2025年第2期47卷 315-327页

作者：朱新宇崔浩锐宋洋中国民用航空飞行学院航空电子电气学院广汉618307 西南交通大学利兹学院成都611756

作为高铁牵引供电系统的重要组成部分,接触网系统承担着向动车组传输电能的重要功能.实际工程运营表明,受弓网交互产生的持续冲击以及外部环境的影响,接触网支撑部件可能会出现“松、脱、断、裂”等缺陷,导致接触网结构可靠性下降,严重... 详细信息

作为高铁牵引供电系统的重要组成部分,接触网系统承担着向动车组传输电能的重要功能.实际工程运营表明,受弓网交互产生的持续冲击以及外部环境的影响,接触网支撑部件可能会出现“松、脱、断、裂”等缺陷,导致接触网结构可靠性下降,严重影响接触网系统稳定运行.因此,及时精确定位接触网支撑部件(CSCs),对保障高铁安全运行和完善接触网检修维护策略具有重大意义.然而,CSCs的检测通常面临着零部件种类多、尺度差异大、部分零部件微小的问题.针对以上问题,本文提出一种基于多尺度融合金字塔焦点网络的接触网零部件检测算法,将平衡模块和特征金字塔模块相结合,提高对小目标的检测性能.首先,设计了可分离残差金字塔聚合模块(SRPAM),用于优化模型多尺度特征提取能力、扩大感受野,缓解CSCs检测的多尺度问题;其次,设计了一种基于平衡特征金字塔的路径聚合网络(PA-BFPN),用于提升跨层特征融合效率和小目标检测性能.最后,通过对比试验、可视化实验和消融实验证明了所提方法的有效性和优越性.其中,所提的MFPFCOS在CSCs数据集上的检测精度(mAP)能够在达到48.6%的同时,实现30的FLOPs(Floating point operations per second),表明所提方法能够在检测精度和检测速度之间保持良好的平衡.

关键词：深度学习目标检测接触网支撑组件(CSCs) 路径聚合特征金字塔(PA-FPN) 空洞空间卷积池化金字塔(ASPP)

同方期刊数据库

A rapid and cost effective protocol for plant genomic DNA isolation using regenerated silica columns in combination with CTAB extraction

在线全文

学校读者我要写书评

暂无评论

journal of Integrative Agriculture 2017年第8期16卷 1682-1688页

作者： FU Ze-yu song jian-cheng Paula e.jameson School of Biological Sciences University of Canterbury School of Life Sciences Yantai University

Isolation of high quality DNA from multiple samples can be both time-consuming and expensive. We have developed a combined protocol to reduce the time component of the hexadecyltrimethylammonium bromide （CTAB） extraction method and reduced costs by regenerating the silica columns used to purify genomic DNA. We present data that shows, by in- creasing the temperature used during the CTAB method, the time required to extract crude genomic DNA can be reduced. We show that silica columns can be regenerated using HCI and still maintain their DNA-binding capacity. Furthermore, we show both spectrophotometrically, and by restriction enzyme cutting, that the quality of the eluted DNA is high. Critically, using both genomic DNA from pea and perennial ryegrass we demonstrate, using species-specific PCR primers, that there is no carry-over of DNA from repeated use of a single column. The main advantages of the method are high yield, high quality, cost effectiveness and time-saving. This method could satisfy demand when large numbers of plant genomic DNA samples are required, for example from targeting induced local lesions in genomes （TILLING） populations.

关键词： CTAB DNA isolation silica columns

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

在线全文

学校读者我要写书评

暂无评论

journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： Y.B.Zhang S.j.song F.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPFe)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

Solutions to the nonhomogeneous generalized Sylvester quaternion j-conjugate matrix equation 36

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Solutions to the nonhomogeneous generalized Sylvester quater...

Improving the electrochemical performance of α-MoO_(3) electrode using aluminium trifluoromethanesulfonate water-in-salt electrolyte

第36届中国控制会议

作者： Caiqin song jun-e Feng Xiaodong Wang School of Mathematical Sciences University of Jinan School of Mathematics Shandong University School of Management Science and engineering Shandong Normal University

ISBN: (纸本)9781538629185

In this article, we develop a real representation method for computing the solution pair(X, Y) to the nonhomogeneous generalized Sylvester quaternion j-conjugate matrix equation XB-AX = CY + R. Compared to the existing complex representation method [***, ***, Acta Mathematica Scientia 2012, 32(B)(5):1967-1982], the advantage of this new approach is that there is no special requirement on the any coefficient matrix. In this sense, we generalize the existing results. Finally, a numerical example is provided to support the theoretical findings and to testify the effectiveness and usefulness of the developed algorithm.

关键词： quaternion matrix equation explicit solution real representation

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

journal of energy Chemistry 2023年第3期78卷 123-134,I0004页

作者： Ayman e.elkholy Timothy T.Duignan Ruth Knibbe Xiu song Zhao School of Chemical engineering The University of QueenslandSt Lucia CampusBrisbane 4072Australia School of Mechanical and Mining engineering The University of QueenslandSt Lucia CampusBrisbane 4072Australia

Orthorhombic molybdenum trioxide(α-MoO_(3)) electrode material experiences severe capacity fading and poor cycling stability in aqueous *** investigated the charge-storage performance of α-MoO_(3) electrode in aluminium trifluoromethanesulfonate(Al(OTf)_(3))-based salt-in-water electrolyte(SiWe) and water-in-salt electrolyte(WiSe).It was found that α-MoO_(3) electrode exhibits significantly different cycling stabilities in both electrolytes with capacity retentions of 8% using the former and87% using the *** is because α-MoO_(3) electrode maintains its crystal structure upon cycling in WiSe,but experiences substantial structural collapses and partial dissolution upon cycling in *** behaviour was inferred from both operando electrogravimetry and ex situ *** results suggest that the predominant charge-storage mechanism in a-MoO_(3) electrode using WiSe is the intercalation of protons produced from electrolyte hydrolysis with some contribution from surface pseudocapacitance enabled by Al3+ions.A two-volt full cell fabricated from α-MoO_(3) electrode as anode and copper hexacyanoferrate(CuHCF) electrode as cathode using WiSe delivers volumetric and gravimetric energies of 10.4 Wh/L and 26.5 Wh/kg,respectively,with 78% capacity retention after 2500 *** study provides an insightful understanding of the electrochemical performance of α-MoO_(3) electrode in Al(OTf)_(3)-based electrolytes.

关键词： Molybdenum oxide Aqueous electrolyte Water-in-salt electrolyte Aqueous batteries Pseudocapacitance

effect of ceria surface facet on stability and reactivity of isolated platinum atoms

在线全文

学校读者我要写书评

暂无评论

Nano Research 2022年第7期15卷 5922-5932页

作者： Bochuan song Shuxin Si Asiye Soleymani Yan Xin Helena e.Hagelin-Weaver Department of Chemical engineering University of FloridaGainesville 32611USA National High Magnetic Field Laboratory Florida State UniversityTallahassee 32310USA

Well-defined surface structures and uniformity are key factors in exploring structure–activity relationships in heterogeneous catalysts.A modified atomic layer deposition method and three well-defined CeO_(2) nanoshapes,octahedra with(111)surfaces,cubes exposing(100)facets,and rods with(100)and(110)surface facet terminations,were utilized to synthesize ultra-low loading Pt/CeO_(2) catalysts and allow investigations on the influence of ceria surface facet on isolated Pt species under reducing conditions.A mild reduction temperature(150℃)reduces the initial platinum ions present on the surfaces of the ceria support but preserves the isolated Pt atoms on all ceria surface *** contrast,a reduction temperature of 350°C,reveals very different interactions between the initial single Pt atoms and the various ceria surface facets,leading to dissimilar and nonuniform Pt ensembles on the three ceria *** isolate facet dependent Pt–CeO_(2) interactions and avoid variations between Pt species,the Pt1/CeO_(2) catalysts after reduction at 150°C were subjected to CO oxidation *** isolated Pt atoms on the CeO_(2) octahedra and cubes are less active in the CO oxidation reaction,compared with Pt on CeO_(2) *** the case of Pt on the CeO_(2) octahedra this is due to strongly bound CO blocking active sites together with a stable CeO_(2)(111)surface limiting the oxygen supply from the *** the CeO_(2) cubes,some Pt is not available for reaction and CO is bound strongly on the available Pt *** addition,the Pt catalysts supported on the CeO_(2) cubes are not stable with time on *** isolated Pt atoms on the CeO_(2) rods are considerably more active under these conditions and this is due to a weaker Pt–CO bond strength and more facile reverse oxygen spillover from the defect-rich(110)surfaces of the rods due to the lower energy of oxygen vacancy formation on this CeO_(2) *** Pt supported on the CeO_(2) rods is also remarkably stable with t

关键词： single atom catalyst CeO_(2)shapes facet effects Pt1/CeO_(2) diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS)

experimental and Numerical Investigation on Impact Performance of Carbon Reinforced Aluminum Laminates

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Materials Science & Technology 2010年第4期26卷 327-332页

作者： S.H. song Y.S. Byun T.W. Ku W.j. song j. Kim B.S. Kang National Core Research Center Pusan National University Busan 609-735 Korea Dept. of Aerospace engineering Pusan National University Busan 609-735 Korea Industrial Liaison Innovation Cluster Pusan National University Busan 609-735 Korea

It is known that fiber metal laminates （FML） as one of hybrid materials with thin metal sheets and fiber/epoxy layers have the characteristics of the excellent damage tolerance, fatigue and impact properties with a relatively low density. Therefore, the mechanical components using FML can contribute the enhanced safety level of the sound construction toward the whole body. In this study, the impact performance of carbon reinforced aluminum laminates （CARAL） is investigated by experiments and numerical simulations. Drop weight tests are carried out with the weight of 4.7 kg at the speed of 1 and 2 m/s, respectively. Dynamic non-linear transient analyses are also accomplished using a finite element analysis software, ABAQUS. The experiment results and numerical results are compared with impact load-time histories. Also, energy-time histories are applied to investigate the impact performance of CARAL.

关键词： Fiber metal laminates (FML) Carbon reinforced aluminum laminates (CARAL) Numerical simulation Impact performance

Note on higher-point correlation functions of the TT or jT deformed CFTs

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2021年第9期64卷 15-28页

作者： song He Center for Theoretical Physics College of PhysicsJilin UniversityChangchun 130012China Max Planck Institute for Gravitational Physics(Albert einstein Institute) Am M¨uhlenberg 1Golm 14476Germany

We investigate generic n-point correlation functions of conformal field theories(CFTs),with TT and jT deformations,in terms of the perturbative CFT *** systematically obtain the first order correction to the generic correlation functions of CFTs with TT or jT *** compute the out of time ordered correlation function(OTOC)in the Ising model with TT or j.eformation,which confirms that these deformations do not change the integrable property up to the first order level.

关键词： integrable deformation conformal field theory quantum chaos quantum integrability quantum entanglement

Overview and Lessons Learned for Increasing Influenza Vaccination Coverage Among Healthcare Workers in the United States

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China CDC weekly 2020年第44期2卷 862-866页

作者： Ying song Alexander j.Millman Influenza Division Centers for Disease Control and PreventionAtlantaGAUSA

Vaccinating healthcare workers(HCWs)annually against influenza is a key strategy for protecting HCWs,preventing nosocomial outbreaks and mortality(particularly among high-risk patient populations),and reducing work absenteeism during the influenza season(1–4).Vaccinated HCWs have also been shown to be more likely to recommend influenza vaccination to their patients(5–7).

关键词： mortality annually vaccination