检索结果-南通市图书馆

Prediction of flow patterns during silo discharges using a finite element approach and its preliminary experimental verification

引用

Particuology 2015年第1期13卷 42-49页

作者： S.Ding H.Li j.y.ooi j.M.Rotter Faculty of Science and Engineering University of AgderGrimstadand Tel-TekPorsgrunnNorway School of Material & Mineral Resources Xi'an University of Architecture & Technology Institute for Infrastructure and Environment School of EngineeringUniversity of Edinburgh

Obtaining a reliable discharge of particulate solids from a storage silo is a prerequisite to securing oper- ational adequacy in solids handling processes. If a silo is poorly designed, an unreliable interrupted discharge often occurs. In this study, an in-house finite element （FE） program was modified to predict the particulate solids flow patterns during discharges from silos, and the effect of a double-cone insert on such flow patterns. In FE modeling, a Eulerian approach was adopted with an assumption of steady-state flow-a state that greatly facilitated investigations on the effects of double-cone inserts on the flow of particulate solids. Predictions were carried out on whether the discharge was in mass flow or funnel flow, associated with the inclination angle of the silo＇s hopper. Predicted results were in agreement with the jenike Chart, and proved that an upper lateral pressure ratio value gave a better critical hopper half angle to achieve mass flow （EN 1991-4, 2006）. The shape and size of the stagnant zone were further discussed to address the flow channel boundary between the flowing and static solids if the discharge was in a funnel pattern. Results also showed the effects of a double-cone insert on the flow patterns which con- verted silos from funnel flow to mass flow up to a certain hopper inclination angle and would improve the flow pattern even for shallower angles. Experiments were carried out to verify some of the predicted results. Some qualitative comparisons were made between the predicted results and experimental mea- surements, which indicated that further efforts are needed in predicting the shape of the stagnant zone （flow channel boundary） during funnel flow discharges.

关键词： Discharge pattern Flow boundary Double-cone insert FE analysis Preliminary verification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

引用

journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.y.Huang Z.yang S.y.yang Z.H.Dai y.j.Liu j.H.Liao G.y.Zhong Z.j.Xie y.P.Fang S.S.Zhang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure Heterostructure Photothermal effect Photocatalyst Hydrogen evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Supposition of graphene stacks to estimate the contact resistance and conductivity of nanocomposites

引用

Applied Mathematics and Mechanics(English Edition) 2024年第4期45卷 663-676页

作者： y.ZARE M.T.MUNIR G.j.WENG K.y.RHEE Biomaterials and Tissue Engineering Research Group Department of Interdisciplinary TechnologiesBreast Cancer Research CenterMotamed Cancer InstituteTehran ***Iran College of Engineering and Technology American University of the Middle EastEgaila 54200Kuwait Department of Mechanical and Aerospace Engineering Rutgers UniversityNew BrunswickNJ 08903U.S.A. Department of Mechanical Engineering(BK21 Four) College of EngineeringKyung Hee UniversityYongin 446701Republic of Korea

In this study,the effects of stacked nanosheets and the surrounding interphase zone on the resistance of the contact region between nanosheets and the tunneling conductivity of samples are evaluated with developed equations superior to those previously *** contact resistance and nanocomposite conductivity are modeled by several influencing factors,including stack properties,interphase depth,tunneling size,and contact *** developed model's accuracy is verified through numerous experimental *** further validate the models and establish correlations between parameters,the effects of all the variables on contact resistance and nanocomposite conductivity are ***,the contact resistance is primarily dependent on the polymer tunnel resistivity,contact area,and tunneling *** dimensions of the graphene nanosheets significantly influence the conductivity,which ranges from 0 S/m to90 S/*** increased number of nanosheets in stacks and a larger gap between them enhance the nanocomposite's ***,the thicker interphase and smaller tunneling size can lead to higher sample conductivity due to their optimistic effects on the percolation threshold and network efficacy.

关键词： graphene polymer composite stacked nanosheet tunneling conductivity contact resistance interphase

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermo-kinetic characteristics on stabilizing hetero-phase interface of metal matrix composites by crystal plasticity finite element method

引用

journal of Materials Science & Technology 2024年第2期169卷 53-67页

作者： y.B.Zhang S.j.Song F.Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China

Using dislocation-based constitutive modeling in three-dimension crystal plasticity finite element(3D CPFE)simulations,co-deformation and instability of hetero-phase interface in different material systems were herein studied for polycrystalline metal matrix composites(MMCs).Local stress and strain fields in two types of 3layer MMCs such as fcc/fcc Cu-Ag and fcc/bcc Cu-Nb have been predicted under simple compressive ***,more severe strain-induced interface instability can be observed in the fcc/bcc systems than in the fcc/fcc systems upon refining to metallic nanolayered composites(MNCs).By detailed analysis of stress and strain localization,it has been demonstrated that the interface instability is always accompanied by high-stress concentration,i.e.,thermodynamic characteristics,or high strain prevention i.e.,kinetic characteristics,at the hetero-phase *** then follows that the thermodynamic driving forceG and the kinetic energy barrier Q during dislocation and shear banding can be adopted to classify the deformation modes,following the so-called thermo-kinetic *** by inserting a high density of high-energy interfaces into the Cu-Nb composites,such thermo-kinetic integration at the hetero-phase interface allows a successful establishment of MMCs with the high△G-high Q deformation mode,which ensures high hardening and uniform strain distri-bution,thus efficiently suppressing the shear band,stabilizing the hetero-phase interface,and obtaining an exceptional combination in strength and *** hetero-phase interface chosen by a couple of thermodynamics and kinetics can be defined as breaking the thermo-kinetic correlation and has been proposed for artificially designing MNCs.

关键词： Thermodynamics and kinetics Physics-based constitutive modeling Hetero-phase interface Crystal plasticity finite element

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

引用

journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： y.Fu G.G.Wang A.Hu y.Li K.B.Thacker j.P.Weiler H.Hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada Global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(Sy)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** Physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition Process parameter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

引用

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： j.X.Cai B.M.Shi N.Li y.Liu Z.G.Zhang y.N.Zan Q.Z.Wang B.L.Xiao Z.y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Influence of the zigzag fins and inlet arrangements on the cooling proficiency of the mini-channel heat sink

引用

Propulsion and Power Research 2024年第2期13卷 194-206页

作者： A.Torbatinezhad y.Pahamli M.j.Hosseini R.Bahrampoury School of Mechanical Engineering Babol University of TechnologyBabolIran Department of Mechanical Engineering Semnan UniversitySemnanIran Department of Mechanical Engineering Faculty of EngineeringGolestan UniversityGorganIran Department of Mechanical Engineering K.N.Toosi University of TechnologyTehranIran

Mini-channel heatsinks are one of the most effective thermal management methods for high heatﬂux devices due to the high performance of convective heat *** recent years,various techniques have been innovated to improve the thermal proﬁciency of the mini-channel *** of these are taking advantage ofﬁns’structural designs and ar-rangements of inlets and *** zigzagﬁns and channels were considered in the previous works in heatsinks,and researchers analyzed their cooling enhancement ***,in the present work,a combined cooling technique,considering new-type zigzagﬁns’geometrical parameters(arrangement,length,and height)causes turbulenceﬂow and higher convective heat transfer along with different positionings ofﬂow inlet and outlets resulting in superior temper-ature uniformity,is proposed to evaluate their impacts on the cooling proﬁciency of the heat sink versus different Reynolds *** assess the thermal and hydraulic performance of the proposed heatsink,different parameters,including temperature contours,Nusselt numbers,thermal resistance,and entropy generation are *** a result,it is observed that in the case demonstrating the best thermal performance,the Nusselt number,pressure drop,thermal resistance,and entropy generation are respectively 37.13,4586.46 Pa,0.000078 m^(2)·K/W,and 0.1078 W/K in the best *** well,it is found that by changing the arrangements of inlets and outlets,the Nusselt number,and thermal resistance are improved by 12%and 13%,***,the proposed mini-channel heat sink could be used as a high-performance thermal management system for electronic devices in different industries,including energy,solar,and medical sectors.

关键词： Thermal management Heat transfer enhancement Mini-channel heatsink Zigzagﬁn Entropy generation Electronic cooling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Creep-induced redistribution of alloying elements in CZ1 zirconium alloys

引用

journal of Materials Science & Technology 2024年第6期173卷 31-44页

作者： W.T.Lin Q.y.Lv D.jiao L.B.Zhang j.Tan G.Sha j.Hu China Nuclear Power Technology Research Institute Shenzhen 518026China School of Material Science and Engineering Nanjing University of Science and TechnologyNanjing 210094China

Introducing minor alloying elements is an effective strategy to improve the corrosion and mechanical properties of zirconium alloys for nuclear *** in-reactor service,external environment and stress can affect the distribution of alloying elements,substantially changing the degradation process of zirconium *** date,there is a lack of in-depth understanding of the interaction between creep and microchemistry ***,we conducted systematic transmission electron microscopy(TEM)and atom probe tomography(APT)investigations to address creep-induced redistribution of alloying elements in CZ1(Zr-Sn-Nb-Fe-Cr-Cu)zirconium alloy with different initial ***,Fe,Sn,and Cu are found to co-segregate at grain *** higher the intermediate annealing temperature,the larger the Gibbsian interfacial excesses of solute elements *** further demonstrate that creep can reduce the excess value of Fe at grain boundaries due to the coarsening of Zr-Fe-Cr second phase particles via grain boundary and dislocation pipe *** the same time,the excess value of Sn is increased by diffusing from the matrix to grain ***,Cu as a minor element in the concentration range of 0.05-0.3 wt.%is found to segregate at dislocations to form the Cottrell atmosphere and develop Cu-rich nanoclusters for suppressing dislocation *** new understanding of the segregation and clustering of minor alloying elements provides guidance for developing zirconium alloys with enhanced creep resistance.

关键词： Zirconium alloy Thermal creep Grain boundary segregation Dislocation segregation Cu-rich nanoclusters

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Four Late-type Galaxies with Double Radio Lobes and Properties of Such Galaxies

引用

Research in Astronomy and Astrophysics 2024年第4期24卷 84-90页

作者： Z.S.yuan X.y.Gao Z.L.Wen j.L.Han National Astronomical Observatories Chinese Academy of SciencesBeijing 100101China CAS Key Laboratory of FAST National Astronomical ObservatoriesChinese Academy of SciencesBeijing 100101China School of Astronomy and Space Sciences University of Chinese Academy of SciencesBeijing 100049China

The triggering mechanism for radio lobes from late-type galaxies is not fully *** samples are desired for a thorough investigation and *** utilizing the optical data from the newly released Dark Energy Spectroscopic Instrument imaging surveys and the radio sources from the NRAO VLA Sky Survey and the Faint Images of the Radio Sky at Twenty-centimeter,we identify four Late-type Galaxies with double Radio Lobes(La GRLs):j0217-3645,j0947+6220,j1412+3723 and j1736+*** previously known La GRLs,we confirm the correlation between radio power P_(1.4GHz)and stellar mass M_(*)of host ***(25/35)La GRLs belong to the blue cloud galaxies,while the newly identified cases in this work are located within the region of the red *** find a clear correlation between the differential radio power,i.e.,the offset from the P_(1.4GHz)-M_(*)relation,and the galaxy color,indicating that bluer galaxies at a fixed M_(*)tend to host more powerful radio ***,the majority(31/36)of La GRLs are either located in a galaxy group or displaying a disturbed *** suggest that all of the galaxy mass,color and surrounding environment could play important roles in triggering radio lobes in late-type galaxies.

关键词： galaxies:active galaxies:jets galaxies:spiral radio continuum:galaxies

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

引用

journal of Magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.y.Xue X.j.Li j.H.Chu M.M.Li D.N.Zou L.B.Tong School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

关键词： Mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：