检索结果-南通市图书馆

Waste Disposal and Sustainable Energy 2024年第1期6卷 85-94页

作者： Demetra Tsiamis Fabio Poretti Stefano Consonni Marco j.Castaldi Earth Engineering Center Department of Chemical EngineeringThe City College of New YorkNew YorkNYUSA Dipartimento Di Energetica Politecnico Di MilanoPiazza Leonardo da Vinci 3220133MilanItaly

The European Union(EU)and the United States(US)determine municipal solid waste(MSW)statistics *** EU applies a site-specific methodology that directly measures waste whereas the US employs a materials flow methodology that estimates MSW statistics indirectly based on production and recovery data from *** study dissects the materials flow methodology and presents quantitative materials flow Sankey diagrams for the primary MSW materials to highlight data gaps that can be addressed to improve the methodology’s *** industry plastics data were applied to the materials flow methodology,and the results were within 10%of the plastics statistics reported by the US Environmental Protection Agency(US EPA).Drawbacks to the methodologies include EU measurement inaccuracies due to double-counting and not accounting for residual waste in the *** latter may partially explain why landfilling tonnages reported by the US EPA were approximately 60%less than the tonnages reported by the Waste to Energy Research and Technology Council(WTERT)in its national MSW survey that applied the EU methodology in the *** the EU,there is no US national policy that requires states to measure and report state-level waste data to the US *** improvements in US MSW statistics rely heavily on the implementation of national policies to homogenize the measurement and collection of waste data from states.

关键词： Materials flow methodology Site-specific methodology United States European Union Municipal solid waste Discrepancy

Synthesis and characterization of ultra-soft alginate hydrogel mimicking lung tissue

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International journal of Smart and Nano Materials 2024年第3期15卷 593-609页

作者： Xiangpeng Li jihua Gou Chiranjit Maiti Olusegun j.Ilegbusi Department of Mechanical and Aerospace Engineering University of Central FloridaOrlandoFLUSA

Alginate hydrogels possess properties analogous to those of the extracellular matrix(ECM).Thus,their mechanical behavior approx-imates soft tissue,which makes them desirable for the production of tissue-equivalent soft deformable *** study aims to determine the synthesis-structure-property relationship for alginate hydrogel with the Young’s modulus in the range of 10°~101 kPa,mimicking to that of human lung ***,a 3D polymer network embedded in a water-rich *** alginate hydrogels are synthesized by a direct mixture of sodium alginate and CaCO3,followed by the addition of D-glucono-δ-lactone(GDL)to initiate in-situ Ca^(2+)release and *** influence of alginate concentration and molar ratio of the constitu-ent calcium ion to carboxyl group from alginate monomer are evaluated while the Young’s modulus of the hydrogel is carefully controlled within the desired *** and SEM are used to characterize the influence of synthesis parameters at the molecular and microstructure *** and compression testing are performed to determine the Young’s modulus of the *** relations are established between synthesis parameters and the mechanical *** result of the study will be subse-quently used to guide the additive manufacturing of soft deform-able structures based on alginate hydrogels.

关键词： Alginate hydrogels Ultra-low modulus lung tissue-mimicking materials

Performance enhancement of futuristic airplanes by nature inspired biomimetic fish scale arrays--A design approach

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Biomimetic Intelligence & Robotics 2022年第2期2卷 32-47页

作者： Ganesh Natarajan S Bruce Ralphin rose j Department of Mechanical Engineering Anna University Regional Campus TirunelveliTamilnaduIndia

Biomimetics has an immense potential to drive the next generation of technologies forward by propounding competent solutions from *** decades,the nonsmooth topography of most living creatures has been critical to their existence and *** to human-made smooth surfaces,when adapted for fluid flow applications,nonsmooth surfaces can enhance the overall aerodynamic performance by reducing the drag ***,the bioinspired scale structure of fish has been identified as a key biomimetic derivative for improving the aerodynamic efficiency in various cross-domain *** study investigates the aerodynamics of a fish scale array(FSA)NACA 0021 model at a specific Reynolds number(Re)of approximately 2.46×105 that is meant for laminar flow conditions using Computational Fluid Dynamics(CFD)tools and a subsonic wind tunnel facility.A 3D printed biomimetic FSA film is developed and affixed on the NACA 0021 wing profile for the experimental investigation,followed by flow visualization through the smoke tunnel *** proved qualitatively under specific aerodynamic conditions,the creation of velocity streaks has a major role in the drag reduction *** obtain a clear perspective of flow across the overlapping fish scale structures,the results are focused on the central and overlapping regions of the FSA *** experiment has proved the existence of a combined formation of low and high velocity streaks in central and overlapping *** FSA 0021 model showed a maximum drag reduction of 9.57%,which was attributed to the streak formation phenomenon observed in the overlapping FSA configuration.

关键词： Biomimetics Aerodynamics Fish scale arrays Drag reduction Bioinspired design

Emerging high-entropy strategy: A booster to the development of cathode materials for power batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Advanced Ceramics 2024年第8期13卷 1093-1118页

作者： Liping Huang jinging Zhu j-Xuan Liu Houzheng Wu Guo-jun Zhang State Key Laboratory for Modification of Chemical Fibers and Polymer Materials Institute of Functional MaterialsCollege of Materials Science and EngineeringDonghua UniversityShanghai 201620China SIAMC Advanced Materials Cooperation Huzhou 313100China

The coordinated development of new energy vehicles and the energy storage industry has become essential for reducing carbon *** cathode material is the key material that determines the energy density and cost of a power battery,but currently developed and applied cathode materials cannot meet the requirements for high specific capacity,low cost,safety,and good ***-entropy materials(HEMs)are a new type of single-phase material composed of multiple principal elements in equimolar or near-equimolar *** interaction between multiple elements can play an important role in improving the comprehensive properties of the material,which is expected to solve the limitations of battery materials in practical ***,this review provides a comprehensive overview of the current development status and modification strategies of power batteries(lithium-ion batteries(LiBs)and sodium-ion batteries(SIBs)),proposes a high-entropy design strategy,and analyses the structure-activity relationship between the high-entropy effects and battery ***,future research topics related to high-entropy cathode materials,including computational guide design,specific synthesis methods,high-entropy electrochemistry,and high-throughput databases,are *** review aims to provide practical guidance for the development of high-entropy cathode materials for next-generation power batteries.

关键词： cathode materials lithium-ion battery(LIB) sodium-ion battery(SIB) high-entropy strategy

Stable diffusion gradients in microfluidic conduits bounded by fluid walls

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第3期10卷 357-367页

作者： Federico Nebuloni Cyril Deroy Peter R.Cook Edmond j.Walsh Department of Engineering Science Osney Thermo-Fluids InstituteUniversity of OxfordOxford OX20ESUK Sir William Dunn School of Pathology University of OxfordOxford OX13REUK

Assays mimicking in vitro the concentration gradients triggering biological responses like those involved in fighting infections and blood clotting are essential for biomedical *** assays prove especially attractive as they allow precise control of gradient shape allied to a reduction in *** microfluidic devices are fabricated using solid plastics that prevent direct access to responding ***-walled microfluidics allows the manufacture of circuits on standard Petri dishes in seconds,coupled to simple operating methods;cell-culture medium sitting in a standard dish is confined to circuits by fluid walls made of an immiscible *** develop and experimentally validate an analytical model of diffusion between two or more aqueous streams flowing at different rates into a fluid-walled conduit with the cross-section of a circular *** solid walls,fluid walls morph during flows as pressures fall,with wall shape changing down the *** model is validated experimentally for Fourier numbers<0.1 using fluorescein diffusing between laminar *** enables a priori prediction of concentration gradients throughout a conduit,so allowing rapid circuit design as well as providing bioscientists with an accurate way of predicting local concentrations of bioactive molecules around responsive and nonresponsive cells.

关键词： walls diffusion attractive

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 316-331页

作者： H.T.jeong S.W.Lee W.j.Kim Department of Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

The superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy(LAZ1011)with a grain size of 3.2μm,primarily composed of the BCCβphase and a small amount of the HCPαphase,were examined in a temperature range of 473 K to 623 *** microstructural refinement of this alloy was achieved by employing high-ratio differential speed *** best superplasticity was achieved at 523 K and at strain rates of 10^(-4)-5×10^(-4)s^(-1),where tensile elongations of 550±600%were *** the heating and holding stage of the tensile samples prior to tensile loading,a significant increase in grain size was observed at temperatures above 573 ***,it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and *** the investigated strain rate range,the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding,while at high strain rates,lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation *** was concluded that solute drag creep is unlikely to *** the late stages of deformation at 523 K,it was observed that grain boundary sliding led to the agglomeration of theαphase,resulting in significant strain *** mechanism maps were constructed forβ-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate,stress,temperature,and grain size,using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

关键词： Magnesium-lithium alloy Superplasticity Severe plastic deformation Grain size Grain growth

Semitransparent organic solar cells with high light utilization efficiency and color rendering index

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第7期67卷 2248-2256页

作者： Ni Gao Haijun Bin Shangrong Wu RenéA.j.janssen Yongfang Li Laboratory of Advanced Optoelectronic Materials Suzhou Key Laboratory of Novel Semiconductor Materials and DevicesCollege of ChemistryChemical Engineering and Materials ScienceSoochow UniversitySuzhou 215123China jiangsu Key Laboratory of Advanced Negative Carbon Technologies Soochow UniversitySuzhou 215123China Molecular Materials and Nanosystems&Institute for Complex Molecular Systems Eindhoven University of TechnologyEindhoven 5600 MBthe Netherlands

Semitransparent organic solar cells(ST-OSCs)have garnered considerable attention as promising renewable energy technology for integrating photovoltaics into ***,there is a trade-off between power conversion efficiency(PCE)and average visible transmittance(AVT),which hinders the achievement of a high light utilization efficiency(LUE).In this study,we propose a valuable method to address this challenge by replacing the transparent top electrode,Ag,with a 20 nm layer of *** ST-OSCs based on the 20 nm Au electrode demonstrate superior exciton extraction,more efficient charge collection,and higher color-rendering index(CRI)due to their smoother surface,higher conductivity,and enhanced visible light transmittance,resulting in a significantly higher PCE of 13.67%and an enhanced AVT of 30.17%,contributing to a high LUE of 4.15%.Additionally,optically transparent dielectric layers,applied on the front and back sides of the ST-OSCs to further boost performance,delivered an impressive LUE of 4.93%,with PCE and AVT values reaching 14.44%and 34.12%,***,the champion ST-OSCs also exhibited a favorable CRI value of *** achievements represent the bestperforming ST-OSCs to date with both high LUE and CRI and hold significant implications for the prospective commercialization of ST-OSCs.

关键词： semitransparent organic solar cells power conversion efficiency average visible transmittance light utilization efficiency color-rendering index

Dynamic stability characterization of re-entry modules at hypersonic mach numbers

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

International journal of Modeling, Simulation, and Scientific Computing 2017年第1期8卷 153-164页

作者： j.Vinoth j.Bruce Ralphin rose Department of Aeronautical Engineering Regional Campus Anna UniversityTirunelveli Tamil Nadu 627007India

At the time of re-entry modules entering into the atmosphere from space,a small perturbation introduces dynamic oscillations on the vehicle because of their extreme traveling *** dynamic stability characteristics of re-entry modules at hypersonic Mach numbers is of considerable relevance to their initial *** the present paper,the dynamic stability of blunt cone model about 10◦is examined with wide range of design parameters such as nose bluntness,semi-vertex angle and center of rotation through theoretical and experimental *** approximations are made over a model based on the standard Newtonian *** are conducted at 0.25m hypersonic wind tunnel at M=8.3 and the following trends are observed from the experimental ***,the incremental higher nose bluntness,semi-vertex angle and center of rotation reduce the dynamic *** higher hypersonic Mach numbers(M>10),dynamic stability characteristics of the re-entry module are insensitive to the free stream Mach ***,it is observed that the dynamic stability is increased in proportion to the vibration amplitude at hypersonic speeds.

关键词： Re-entry dynamic stability Newtonian theory flexure pivot center of rotation least square method

CO oxidation under lean and stoichiometric conditions over ceriazirconia with very low metal contents(Cu,Co,Ag and Pt)

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第9期42卷 1669-1681,I0002页

作者： j.C.Martínez-Munuera M.P.Yeste A.García-García MCMA Group Department of Inorganic Chemistry and Institute of MaterialsUniversity of AlicanteCarretera de San Vicente del Raspeig s/n03690San Vicente del RaspeigAlicanteSpain Solid Chemistry and Catalysis Group Department of Materials ScienceMetallurgic Engineering and Inorganic ChemistryInstitute of Electronic Microscopy and Materials ResearchUniversity of CádizAp.40E-11510Puerto RealCádizSpain

In this work,several ceria-zirconia based catalysts with very lo w(and equimolar) metal contents were prepared,characterised and tested for the CO oxidatio n reaction(under lean and stoichiometric conditions),trying to emulate those conditions found in a diesel oxidation catalyst(DOC) system from a diesel engine and those encountered under gasoline exhaust(λ=1).The metals chosen are Cu,Co,Ag and Pt(as a reliable benchmark).The results reveal enormous differences among reducibility and catalytic activity despite quite similar structural and textural properties of the catalysts,showing differences among dispersion(Ag-catalyst seems to present a low level of dispersion).This catalyst seems to be characterised,as well,by a strong electronic interaction between Ce and Ag centres which is suggested to yield an improved reducibility under H_(2)-TPR ***,the order in catalytic activity(Cu>Ag>Co≈Pt>>support) seems not to follow the order found in reducibility and the Cu-catalyst seems to be the most active independently on the reaction conditions,yielding nearly overlapped CO oxidation catalytic *** restingly,a stro ng correlation between the catalytic activity under the two conditions tested and the OSC values of the Ce_(0.8)Zr_(0.2)O_(2)-supported metal catalysts is ***,OSC parameter measured at 150℃ can be used as a relevant descriptor to evaluate the CO oxidation activity at low and medium conversions for the investigated catalysts,much better than the H_(2)-TPR measurements.

关键词： CO oxidation Low metal content Ceria-zirconia Copper species OSC parameter Rare earths

Effects of pyrethroid and organophosphate insecticides on reared black soldier fly larvae(Hermetia illucens)

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Insect Science 2024年第3期31卷 817-834页

作者： Nathan Meijer Lisa Zoet Theo de Rijk Paul Zomer Deborah Rjkers H.j.van der Fels-Klerx joop j.A.van Loon Wageningen Food Safety Research(WFSR) Part of Wageningen University and ResearchWageningenThe Netherlands Bestico B.V. Industrieweg 6Berkel en RodenrjsThe Netherlands Plant Sciences Group Laboratory of EntomologyWageningen UniversityWageningenTheNetherlands

Black soldier fly larvae(Hermetia illucens)receive growing interest as a potential alternative animal feed *** insects may be exposed to insecticide residues in the rearing *** study aimed to investigate the effects of six different pyrethroid and organophosphate insecticides on this insect species'*** toxicity of two"model"substances for each of these classes(cypermethrin;pirimiphosmethyl)was quantified,with and without the synergist piperonyl butoxide(PBO).Critical effect doses corresponding to 10%yield(CED10)for cypermethrin(0.4 mg/kg)and pirimiphos-methyl(4.8 mg/kg)were *** addition of PBO to cypermethrin enhanced its relative potency with a factor *** data were compared against the relative toxicity of two analogue substances in each class(permethrin,deltamethrin;chlorpyrifosmethyl,malathion).Results suggest that exposure to concentrations complying with legal limits can cause significant reductions in *** to multiple substances at lower concentrations resulted in negative additive and synergistic *** the tested substances,deltamethrin was most toxic,causing 94%yield at 0.5 mg/*** results suggested that transfer of tested substances to the larval biomass was substance-and concentration-specific,but appeared to be correlated to reduced yields and the presence of *** of organophosphates was overall low(justing legally allowed maximum residue levels in insect feed.

关键词： feed insects pesticides rearing substrate