检索结果-南通市图书馆

journal of magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.Y.Xue X.j.li j.h.Chu m.m.li d.N.Zou l.B.Tong School of metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key laboratory of Advanced design and manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of mg alloys.

关键词： mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

Interaction of photons with silver and indium nuclei at energies up to 20 meV

在线全文

学校读者我要写书评

暂无评论

Chinese Physics C 2024年第2期48卷 135-140页

作者： j.h.khushv.ktov.m.a.demichev.d.l.demin S.A.Evseev m.I.Gostkin V.V.Kobets F.A.Rasu-lova S.V.Rozov E.T.Ruziev A.A.Solnyshkin T.N.Tran E.A.Yakushev B.S.Yuldashev joint Institute for Nuclear Research(jINR) DubnaRussia Institute of Nuclear Physics of the Academy of Sciences of the Republic of Uzbekistan(INP ASRU) TashkentUzbekistan Institute of Physics of the Vietnam Academy of Science and Technology(IP VAST) HanoiVietnam

The yields of photonuclear reactions in the 107Ag,113In,and 115In nuclei were *** Carlo simulations were performed using the Geant4 code,and the results were compared with the experimental *** isomeric ratios of the yields in the reactions 107Ag(γ,n)106m,gAg and 113In(γ,m)112m,gIn were determined,and the cross sections for the reactions 107Ag(γ,n)106gAg and 107Ag(γ,2n)105Ag at an energy of 20 meV were calculated based on the experimental data.

关键词： 107Ag(γ,n)10mgAg and I13In(γ,n)12m-2In reactions cross section yield isomeric ratio simula-tion Geant4 TAlYS

On an isotropic porous solid cylinder:the analytical solution and sensitivity analysis of the pressure

在线全文

学校读者我要写书评

暂无评论

Applied mathematics and mechanics(English Edition) 2024年第9期45卷 1499-1522页

作者： h.ASGhARI l.mIllER R.PENTA j.mEROdIO departamento de matematica Aplicada a las TIC ETS de Ingenieria de Sistemas InformaticosUniversidad Politecnica de MadridMadrid 28031Spain School of mathematics and Statistics University of GlasgowGlasgow G128QQU.K.

Within this work,we perform a sensitivity analysis to determine the influence of the material input parameters on the pressure in an isotropic porous solid *** provide a step-by-step guide to obtain the analytical solution for a porous isotropic elastic cylinder in terms of the pressure,stresses,and elastic *** obtain the solution by performing a laplace transform on the governing equations,which are those of Biot's poroelasticity in cylindrical polar *** enforce radial boundary conditions and obtain the solution in the laplace transformed domain before reverting back to the time *** sensitivity analysis is then carried out,considering only the derived pressure *** analysis finds that the time t,Biot's modulus m,and Poisson's ratio ν have the highest influence on the pressure whereas the initial value of pressure P_(0) plays a very little role.

关键词： sensitivity analysis laplace transform cylindrical polar coordinate Biot's modulus cylinder

Radioisotope production using lasers:From basic science to applications

在线全文

学校读者我要写书评

暂无评论

matter and Radiation at Extremes 2024年第3期9卷 31-44页

作者： m.R.d.Rodrigues A.Bonasera m.Scisciò j.A.Pérez-hernández m.Ehret F.Filippi P.l.Andreoli m.huault h.larreur d.Singappuli d.molloy d.Raffestin m.Alonzo G.G.Rapisarda d.lattuada G.l.Guardo C.Verona Fe.Consoli G.Petringa A.mcNamee m.la Cognata S.Palmerini T.Carriere m.Cipriani G.di Giorgio G.Cristofari R.de Angelis G.A.P.Cirrone d.margarone l.Giuffrida d.Batani P.Nicolai K.Batani R.lera l.Volpe d.Giulietti S.Agarwal m.Krupka S.Singh Fa.Consoli Cyclotron Institute Texas A&M UniversityCollege StationTexas 77840USA laboratori Nazionali del Sud Istituto Nazionale di Fisica Nucleare(LNS-INFN)CataniaItaly ENEA Fusion and Technologies for Nuclear Safety and Security Department-CFrascatiItaly Centro de láseres Pulsados(clpu) VillamayorSpain Universidad de Salamanca SalamancaSpain Centre lasers Intenses et Applications(CElIA) Universitéde BordeauxCNRSCEATalenceFrance hB11 Energy holdings Pty FreshwaterNew South WalesAustralia School of mathematics and Physics Queen’s University BelfastBelfastUnited Kingdom dipartimento di Fisica e Astronomia“E.majorana ”Università di CataniaCataniaItaly Facoltàdi Ingegneria e Architettura Universitàdegli Studi di Enna“Kore”EnnaItaly dipartimento di Ingegneria Industriale Universitàdi Roma“Tor Vergata”RomaItaly dipartimento di Fisica e Geologia Universitàdegli Studi di PerugiaPerugiaItaly Istituto Nazionale di Fisica Nucleare Sezione di PerugiaPerugiaItaly ElI Beamlines Facility the Extreme Light Infrastructure ERICDolni BrezanyCzech Republic ETSIA Universidad Politécnica de MadridMadridSpain dipartimento Fisica “E.Fermi”Universitàdi Pisa and INFNPisaItaly FZU–Institute of Physics of Czech Academy of Sciences PragueCzech Republic Institute of Plasma Physics of Czech Academy of Sciences PragueCzech Republic

The discovery of chirped pulse amplification has led to great improvements in laser technology,enabling energetic laser beams to be compressed to pulse durations of tens of femtoseconds and focused to a few *** with energies of tens of meV can be accelerated using,for instance,target normal sheath acceleration and focused on secondary *** such conditions,nuclear reactions can occur,with the production of radioisotopes suitable for medical *** use of high-repetition lasers to produce such isotopes is competitive with conventional methods mostly based on *** this paper,we study the production of^(67)Cu,^(63)Zn,^(18)F,and^(11)C,which are currently used in positron emission tomography and other *** the same time,we study the reactions^(10)B(p,α)^(7)Be and^(70)Zn(p,4n)^(67)Ga to put further constraints on the proton distributions at different angles,as well as the reaction^(11)B(p,α)^(8)Be relevant for energy *** experiment was performed at the 1 PW laser facility at VegaⅢin Salamanca,*** distributions of radioisotopes in the forward(with respect to the laser direction)and backward directions were measured using a high purity germanium *** results are in reasonable agreement with numerical estimates obtained following the approach of Kimura and Bonasera[*** ***.,Sect.A 637,164–170(2011)].

关键词： purity estimates backward

Corrosion testing of X52 and X80 steels immersed in stimulated emulsions using a real petroleum sample

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Research 2024年第2期9卷 304-316页

作者： l.m.Quej-Ake j.l.Alamilla A.Contreras Instituto mexicano del Petróleo Eje Central Lázaro CárdenasNorte 152San Bartolo AtepehuacanGustavo A.MaderoCiudad de MéxicoC.P.07730México

The aim of this study is to evaluate the internal corrosion process on X52 and X80 steels/real petroleum interfaces containing condensed hydrocarbon plus oilfield-produced water,which were subjected to stimulated emulsions using 50/50 vol ratio mixtures at 45℃,different hydrodynamic conditions,1 h,and 24 h.A washing process by using deionized water was proposed to simulate and identify the corrosiveness of the hydrocarbon phase after 24 h of exposure *** characterization by electrochemical impedance spectroscopy and the monitoring of the polarization curves indicated that X80 steel/oilfield-produced water interfaces were more susceptible to corrosion than X52 steel exposed to oilfield-produced *** combined speed rotation of 600 rpm using a magnetic stirrer+600 rpm using a rotating disk electrode decreased the corrosion rate on X52 *** stimulated emulsions made of hydrocarbon+oilfield-produced water and hydrocarbon+deionized water at 24 h increased the corrosion rate on X80 steel(0.34 mm/year and 0.43 mm/year,respectively),promoting the formation of erosion and pitting *** types of corrosion depended mainly on the physicochemical properties of the hydrocarbon,oilfield-produced water,exposure times,and hydrodynamic systems in which the hydrocarbon was studied.

关键词： Corrosion Emulsions X52 steel X80 steel

modelling dynamic pantograph loads with combined numerical analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Railway Engineering Science 2024年第1期32卷 81-94页

作者： F.F.jackson R.mishra j.m.Rebelo j.Santos P.Antunes j.Pombo h.magalhaes l.Wills m.Askill School of Computing and Engineering University of HuddersfieldHuddersfieldUK School of Computing and Engineering Institute of Railway ResearchUniversity of HuddersfieldHuddersfieldUK IdmEC Instituto Superior TecnicoUniversidade de LisboaLisbonPortugal ISEl Instituto Politecnico de LisboaLisbonPortugal hitachi Rail Newton AycliffeUK Wabtec/Brecknell Willis ChardUK

Appropriate interaction between pantograph and catenary is imperative for smooth operation of electric *** heights of overhead lines to accommodate level crossings,overbridges,and tunnels pose significant challenges in maintaining consistent current collection performance as the pantograph aerodynamic profile,and thus aerodynamic load changes significantly with operational *** research aims to analyse the global flow characteristics and aerodynamic forces acting on individual components of an hSX pantograph operating in different configurations and orientations,such that the results can be combined with multibody simulations to obtain accurate dynamic insight into contact ***,computational fluid dynamics simulations are used to investigate the pantograph component loads in a representative setting,such as that of the recessed cavity on a Class 800 *** an aerodynamic perspective,this study indicates that the total drag force acting on non-fixed components of the pantograph is larger for the knuckle-leading orientation rather than the knuckle-trailing,although the difference between the two is found to reduce with increasing pantograph *** the aerodynamic loads acting on individual components with multibody tools allows for realistic dynamic insight into the pantograph *** results obtained show how considering aerodynamic forces enhance the realism of the models,leading to behaviour of the pantograph-catenary contact forces closely matching that seen in experimental tests.

关键词： Pantograph-catenary interaction Pantograph aerodynamics Computational fluid dynamics Pantograph loads Current collection performance

A facile strategy for tuning the density of surface-grafted biomolecules for melt extrusion-based additive manufacturing applications

在线全文

学校读者我要写书评

暂无评论

Bio-design and manufacturing 2024年第3期7卷 277-291页

作者： I.A.O.Beeren G.dos Santos P.j.dijkstra C.mota j.Bauer h.Ferreira Rui l.Reis N.Neves S.Camarero-Espinosa m.B.Baker l.moroni department of Complex Tissue Regeneration MERLN Institute for Technology-Inspired Regenerative MedicineMaastricht University6229 ER MaastrichtThe Netherlands 3B’s Research Group I3Bs–Research Institute on BiomaterialsBiodegradables and BiomimeticsHeadquarters of the European Institute of Excellence on Tissue Engineering and Regenerative MedicineUniversity of MinhoAveParkZona Industrial da Gandra4805-017 BarcoGuimarãesPortugal ICVS/3B’s-PT Government Associate laboratory 4806-909 Braga/GuimarãesPortugal POlYmAT University of the Basque Country UPV/EHU20018 Donostia/San SebastiánSpain IKERBASQUE Basque Foundation for Science48009 BilbaoSpain

melt extrusion-based additive manufacturing(mE-Am)is a promising technique to fabricate porous scaffolds for tissue engi-neering ***,most synthetic semicrystalline polymers do not possess the intrinsic biological activity required to control cell *** of biomolecules on polymeric surfaces of Am scaffolds enhances the bioactivity of a construct;however,there are limited strategies available to control the surface ***,we report a strategy to tune the surface density of bioactive groups by blending a low molecular weight poly(ε-caprolactone)5k(PCl5k)containing orthogonally reactive azide groups with an unfunctionalized high molecular weight PCl75k at different *** porous three-dimensional(3d)scaf-folds were then fabricated using a high weight percentage(75 wt.%)of the low molecular weight PCl *** a proof-of-concept test,we prepared films of three different mass ratios of low and high molecular weight polymers with a thermopress and reacted with an alkynated fluorescent model compound on the surface,yielding a density of 201-561 pmol/cm^(2).Subsequently,a bone morphogenetic protein 2(BmP-2)-derived peptide was grafted onto the films comprising different blend compositions,and the effect of peptide surface density on the osteogenic differentiation of human mesenchymal stromal cells(hmSCs)was *** two weeks of culturing in a basic medium,cells expressed higher levels of BmP receptor II(BmPRII)on films with the conjugated *** addition,we found that alkaline phosphatase activity was only significantly enhanced on films contain-ing the highest peptide density(i.e.,561 pmol/cm^(2)),indicating the importance of the surface *** together,these results emphasize that the density of surface peptides on cell differentiation must be considered at the cell-material ***,we have presented a viable strategy for mE-Am community that desires to tune the bulk and surface functionality via blending of(m

关键词： Additive manufacturing Blending Surface functionalization Surface density Click chemistry human

STCF conceptual design report (Volume 1): Physics & detector

在线全文

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第1期19卷 1-154页

作者： m.Achasov X.C.Ai l.P.An R.Aliberti Q.An X.Z.Bai Y.Bai O.Bakina A.Barnyakov V.Blinov V.Bobrovnikov d.Bodrov A.Bogomyagkov A.Bondar I.Boyko Z.h.Bu F.m.Cai h.Cai j.j.Cao Q.h.Cao X.Cao Z.Cao Q.Chang K.T.Chao d.Y.Chen h.Chen h.X.Chen j.F.Chen K.Chen l.l.Chen P.Chen S.l.Chen S.m.Chen S.Chen S.P.Chen W.Chen X.Chen X.F.Chen X.R.Chen Y.Chen Y.Q.Chen h.Y.Cheng j.Cheng S.Cheng T.G.Cheng j.P.dai l.Y.dai X.C.dai d.dedovich A.denig I.denisenko j.m.dias d.Z.ding l.Y.dong W.h.dong V.druzhinin d.S.du Y.j.du Z.G.du l.m.duan d.Epifanov Y.l.Fan S.S.Fang Z.j.Fang G.Fedotovich C.Q.Feng X.Feng Y.T.Feng j.l.Fu j.Gao Y.N.Gao P.S.Ge C.Q.Geng l.S.Geng A.Gilman l.Gong T.Gong B.Gou W.Gradl j.l.Gu A.Guevara l.C.Gui A.Q.Guo F.K.Guo j.C.Guo j.Guo Y.P.Guo Z.h.Guo A.Guskov K.l.han l.han m.han X.Q.hao j.B.he S.Q.he X.G.he Y.l.he Z.B.he Z.X.heng B.l.hou T.j.hou Y.R.hou C.Y.hu h.m.hu K.hu R.j.hu W.h.hu X.h.hu Y.C.hu j.hua G.S.huang j.S.huang m.huang Q.Y.huang W.Q.huang X.T.huang X.j.huang Y.B.huang Y.S.huang N.hüsken V.Ivanov Q.P.ji j.j.jia S.jia Z.K.jia h.B.jiang j.jiang S.Z.jiang j.B.jiao Z.jiao h.j.jing X.l.Kang X.S.Kang B.C.Ke m.Kenzie A.Khoukaz I.Koop E.Kravchenko A.Kuzmin Y.lei E.levichev C.h.li C.li d.Y.li F.li G.li G.li h.B.li h.li h.N.li h.j.li h.l.li j.m.li j.li l.li l.li l.Y.li N.li P.R.li R.h.li S.li T.li W.j.li X.li X.h.li X.Q.li X.h.li Y.li Y.Y.li Z.j.li h.liang j.h.liang Y.T.liang G.R.liao l.Z.liao Y.liao C.X.lin d.X.lin X.S.lin B.j.liu C.W.liu d.liu F.liu G.m.liu h.B.liu j.liu j.j.liu j.B.liu K.liu K.Y.liu K.liu l.liu Q.liu S.B.liu T.liu X.liu Y.W.liu Y.liu Y.l.liu Z.Q.liu Z.Y.liu Z.W.liu I.logashenko Y.long C.G.lu j.X.lu N.lu Q.F.lü Y.lu Y.lu Z.lu P.lukin F.j.luo T.luo X.F.luo Y.h.luo h.j.lyu X.R.lyu j.P.ma P.ma Y.ma Y.m.ma F.maas S.malde d.matvienko Z.X.meng R.mitchell A.Nefediev Y.Nefedov S.l.Olsen Q.Ouyang P.Pakhlov G.Pakhlova X.Pan Y.Pan E.Passemar Y.P.Pei h.P.Peng l.Peng X.Y.Peng X.j.Peng K.Peters S.Pivovarov E.Pyata B.B.Qi Y.Q.Qi W.B.Qian Y.Qian C.F.Qiao j.j.Qin j.j.Qin l.Q.Qin X.S.Qin T.l.Qiu j.Rademacker C.F.Redmer h.Y.Sang Anhui University Hefei 230039China Beihang University Beijing 100191China Budker Institute of Nuclear Physics Novosibirsk 630090Russia CAS Key laboratory of Theoretical Physics Institute of Theoretical PhysicsChinese Academy of SciencesBeijing 100190China Cavendish laboratory University of CambridgeJJ Thomson AveCambridge CB30HEUnited Kingdom Central China Normal University Wuhan 430079China Central South University Changsha 410083China China University of Geosciences Wuhan 430074China China University of mining and Technology Xuzhou 221116China École Polytechnique Fédérale de lausanne(EPFl) LausanneSwitzerland Fudan University Shanghai 200433China Goethe University Frankfurt D-60325 Frankfurt am MainGermany Guangxi Normal University Guilin 541004China Guangxi Uninversity Nanning 530004China hangzhou Institute for Advanced Study UCASHangzhou 310024China hebei Normal University Shijiazhuang 050024China hebei University Baoding 071002China hefei University of Technology Hefei 230601China helmholtz Institute mainz Staudinger Weg 18D-55099 MainzGermany henan Normal University Xinxiang 453007China henan University Kaifeng 475004China high Energy Physics Center Chung-Ang UniversitySeoul 06974Korea higher School of Economy 11 Pokrovsky Bulvar Moscow 109028Russia huangshan University Huangshan 245000China hubei University of Automotive Technology Shiyan 442002China hunan Normal University Changsha 410081China hunan University of Science and Technology Xiangtan 411201China hunan University Changsha 410082China Indiana University BloomingtonIndiana 47405USA Inner mongolia University Hohhot 010021China Institute of Advanced Science Facilities Shenzhen 518107China Institute of high Energy Physics Chinese Academy of SciencesBeijing 100049China Institute of modern Physics Chinese Academy of SciencesLanzhou 730000China Institute of Physics Academia SinicaTaipeiTaiwan 11529China Institute of Theoretical Physics Chinese Academy of SciencesBeijing 100190China jilin University Changch

The superτ-charm facility(STCF)is an electron–positron collider proposed by the Chinese particle physics *** is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5×10^(35) cm^(–2)·s^(–1) or *** STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory—the BEPCII,providing a unique platform for exploring the asymmetry of matter-antimatter(charge-parity violation),in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions,as well as searching for exotic hadrons and physics beyond the Standard *** STCF project in China is under development with an extensive R&d *** document presents the physics opportunities at the STCF,describes conceptual designs of the STCF detector system,and discusses future plans for detector R&d and physics case studies.

关键词： electron–positron collider tau-charm region high luminosity STCF detector conceptual design

Atomistic Investigation of Shock-Induced Amorphization within micro-shear Bands in hexagonal Close-Packed Titanium

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta metallurgica Sinica(English letters) 2024年第9期37卷 1590-1600页

作者： Z.C.meng K.G.Wang T.Ali d.li C.G.Bai d.S.Xu S.j.li A.h.Feng G.j.Cao j.h.Yao Q.B.Fan h.Wang R.Yang Institute of metal Research Chinese Academy of SciencesShenyang 110016China School of materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Interdisciplinary Centre for Additive manufacturing(ICAm) School of Materials and ChemistryUniversity of Shanghai for Science and TechnologyShanghai 200093China School of materials Science and Engineering Tongji UniversityShanghai 201804China Key laboratory for light-Weight materials Nanjing Tech UniversityNanjing 210009China National Key laboratory of Science and Technology on materials Under Shock and Impact School of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401135China

The mechanical response of a single crystal titanium sample against(0001)α surface impact was investigated using molecular dynamics ***,non-uniform plastic deformation was observed in the *** high strain rates,amorphization occurred near the edge of the contact region where severe shear strain induced a large number of stacking faults(SFs)and *** contrast,the central part of the contact region underwent less deformation with significantly fewer ***,instead of amorphization by consuming SFs and dislocations,there was a gradual increase in the density of dislocations and SFs during the process of *** local amorphous regions eventually grew into shear bands.

关键词： Shock compression Amorphization Shear band Titanium molecular dynamics

Further investigation on the fusion of ^(6)li with ^(209)Bi target at near-barrier energies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics C 2024年第7期48卷 106-117页

作者：张高龙焦振威张广鑫 m.R.Cortes 胡世鹏钱建强 d.mengoni 屈卫卫李聪博郑云张焕乔孙慧斌王楠张春雷 j.j.Valiente-dobón d.Testov m.mazzocco A.Gozzelino C.Parascandolo d.Pierroutsakou m.la Commara A.Goasduff d.Bazzacco d.R.Napoli F.Galtarossa F.Recchia A.Illana S.Bakes I.Zanon S.Aydin G.de Angelis m.Siciliano R.menegazzo S.m.lenzi j.l.Ferreira j.Rangel Serkan Akkoyun l.F.Canto j.lubian School of Physics Beihang UniversityBeijing 100191China Sino-French Institute of Nuclear Engineering and Technology Sun Yat-Sen UniversityZhuhai 519082China Instituto de Física Universidade Federal Fluminense24210-340NiteróiRio de JaneiroBrazil Institute for Advanced Study in Nuclear Energy&Safety Shenzhen UniversityShenzhen 518060China Shenzhen Key laboratory of Research and manufacture of high Purity Germanium materials and Fetectors Shenzhen UniversityShenzhen 518060China INFN Sezione di PadovaPadovaItaly dipartimento di fisica Astronomia dell'Universita di padova PadovaItaly State Key laboratory of Radiation medicine and Protection School of Radiation Medicine and ProtectionSoochow UniversitySuzhou 215123China China Institute of Atomic Energy Beijing 102413China The Key laboratory of Beam Technology and material modification of ministry of Education College of Nuclear Science and TechnologyBeijing Normal UniversityBeijing 100875China INFN Laboratori Nazionali di LegnaroI-35020 LegnaroItaly INFN Sezione di NapoliI-80126 NapoliItaly dipartimento di Farmacia Universitàdi Napoli"Federico II"I-80131 NapoliItaly department of Natural and mathematical Sciences Faculty of EngineeringTarsus University33480 MersinTurkiye Physics division Argonne National LaboratoryLemont-ILUSA departamento de matemaética Física e Computaç˜ao Universidade do Estado do Rio de JaneiroFaculdade de Tecnologia27537-000ResendeRio de JaneiroBrazil department of Physics Sivas Cumhuriyet UniversitySivasTurkey Instituto de Física Universidade Federal do Rio de JaneiroCP 6852821941-972Rio de JaneiroBrazil

The complete and incomplete fusion cross sections for ^(6)li+^(209)Bi were measured using the in-beamγ-ray method around the Coulomb *** cross sections of(deuteron captured)incomplete fusion(ICF)products were re-quantified experimentally for this reaction *** results reveal that the ICF cross section is equivalent to that of complete fusion(CF)above the Coulomb barrier and dominant near or below the Coulomb barrier.A theoretical calculation based on the continuum discretized coupled channel(CdCC)method was performed for the aforementioned CF and ICF cross sections;the result is consistent with the *** universal fusion function(UFF)was also compared with the measured CF cross section for different barrier parameters,demonstrating that the CF suppression factor is significantly influenced by the choice of potential,which can reflect both dynamic and static effects of breakup on the fusion process.

关键词： cross section incomplete fusion suppression factor weakly bound nuclei