检索结果-南通市图书馆

journal of Rare Earths 2024年第10期42卷 1920-1926页

作者： R.Martínez-López M.pérez-Labra j.A.Romero-Serrano f.R.Barrientos-Hernández M.Reyes-pérez M.I.Valenzuela-Carrillo G.Urbano-Reyes V.E.Reyes-Cruz G.I.Dávila-pulido Academic Area of Earth Sciences and Materials Autonomous University of Hidalgo State Metallurgy and Materials Department ESIQIE-IPNUPALM Autonomous University of Coahuila Boulevard Adolfo López Mateos S/n

In this paper,the synthesis,structural evolution,and dielectric properties of BaTiO3solid solutions codoped with rare earth elements(Gd3+and Eu3+) prepared using the solid-state reaction method are *** pure precursor powders of BaCl3,TiO2,Gd2O3,and Eu2O3were mixed in stoichiometric proportions,ground in an agate mortar before being uniaxially pressed at 250 Mpa and sintered at 1300℃ in air atmosphere for 6 h to obtain Ba1-3xGd2xTi1-3xEu4xO3（x=0,0.0015,0.01 and0.1）.X-ray diffraction（XRD） and Rietveld's refinement results reveal the crystal phase ferroelectric tetragonal BaTiO3for the samples with x=0,0.0015 and 0.01, as well as a consistent increment in the lattice parameters caused by the *** solubility limit of Gd3+and Eu3+in the BaTiO3structure is reached for the sample with x>0.01,and the orthorhombic Eu2TiO5and monoclinic BaTi2O5secondary phases were *** Raman results show the characteristic peaks of ferroelectric tetragonal BaTiO3around 716 cm-1（LO of A1 symmetry）,515 cm-1（TO of A1 symmetry）,and 305 cm-1（B1）.The maximum relative permittivity measured at 1 kHz was recorded to be 6151.8 for the sample with x=0.0015,and a decrease in the Curie temperature to 105℃ with respect to the undoped sample was *** punctual microanalysis for the samples with x=0.0015,0.01,and 0.1 reveals grains composed of Ba,Ti,O,Gd,and Eu homogeneously distributed in the *** Ba/Ti ratios for samples with x=0.0015,0.01 and 0.1 are 2.86,2.91,and 0.68,respectively,indicating substitution at the Ti site for samples with x=0.0015 and 0.01 and a substitution at the Ba site for the sample with x=0.1.

关键词： BaTiO3 Doping Europium Gadolinium Rare earths Synthesis

日粮中蛋白质和纤维水平对仔猪生产性能和健康状况的影响

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

国外畜牧学（猪与禽） 2009年第6期29卷 1-7页

作者：冯占雨 R.G.Hermes f.Molist M.Ywazaki M.Nofrarías A.Gomez de Segura j.Gasa j.f.pérez

为了研究日粮的蛋白质和纤维水平对仔猪生产性能和健康状况的互作,特选择96头35日龄的仔猪(体重为9.11±0.60kg),分32个栏饲养,每栏3头,分成4个日粮处理组,饲喂期21d。在设定的2×2因子处理中,4种日粮以大米、奶制品和大豆粕为基础配制... 详细信息

为了研究日粮的蛋白质和纤维水平对仔猪生产性能和健康状况的互作,特选择96头35日龄的仔猪(体重为9.11±0.60kg),分32个栏饲养,每栏3头,分成4个日粮处理组,饲喂期21d。在设定的2×2因子处理中,4种日粮以大米、奶制品和大豆粕为基础配制,日粮蛋白质设两个水平(15.4%与19.4%,风干基),纤维也设两个水平[低水平纤维(Lf)为含5.3%中性洗涤纤维,高水平纤维(Hf)为含7.15%中性洗涤纤维,风干基]。高水平纤维日粮组在基础日粮中添加了40g/kg的小麦麸和20g/kg的甜菜浆。每周测定动物生产性能,试验第1天和最后一天收集粪样进行微生物学分析,并且按1(液态)到4(硬实)的评分体系对粪便进行评分。在试验最后1d,每栏选1头猪采集血液,分析急性期反应蛋白(acute-phase protein)和主要急性期反应蛋白(major acute-phase prot)(即pig-MAp)的含量,随后进行屠宰,对消化道(包括内容物)进行称重,并进行结肠组织学分析。饲喂高水平纤维日粮的仔猪具有较大的平均日增重(390g与457g,p≤0.001)和大肠重量(以占体重比例衡量为4.4%与5.4%,p≤0.05)。这与较高的短链脂肪酸浓度(尤其是乙酸和丁酸)、较少的大肠杆菌数量(每克粪便含7.77与6.86logcfu,p≤0.05)和较高乳酸杆菌与肠道细菌比(0.76与1.37,p≤0.05)是相符的。虽然日粮蛋白质水平没有改变猪的生产性能,但是20%的蛋白质水平提高(p≤0.05)了小肠(6.5与7.7)和大肠(3.8与4.3)的相对重量(占体重的百分比)。在大肠内,含20%蛋白质的日粮使仔猪杯状细胞数量增加(4.6/100与5.4/100μm;p≤0.05),并使肠上皮内淋巴细胞数量减少(1.8/100与1.3/100μm;p≤0.05)。在健康状况方面,提高日粮纤维水平所产生的效果与日粮中的蛋白质含量有关。在含16%蛋白质的日粮中增加纤维水平可降低粪便评分值、增加抗生素治疗次数,然而在含20%蛋白的日粮中增加纤维水平,所产生的情况与此相反。与蛋白质含量为16%的日粮组仔猪相比,蛋白质含量为20%的日粮组仔猪血液pig-MAp浓度较低(p≤0.05)。总的来说,日粮蛋白质对消化道重量和肠壁完整性起主要作用,然而日粮纤维可提高仔猪生产性能,并且促进了肠道微生物区系和发酵指标的改善。

关键词：日粮纤维仔猪蛋白质甜菜浆小麦麸

On the analytical solution of transient friction in channel flows

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第8期45卷 1447-1466页

作者： f.j.GARCíA-GARCíA p.fARINAS-ALVARINO Department of Naval&Industrial Engineering Polytechnic School of EngineeringUniversity of A CorunaCampus Industrial de FerrolFerrol 15403A CorunaSpain Integraciones Técnicas de Seguridad S.A.Pol.Ind.Espiritu SantoC/Nobel15Cambre 15650A CorunaSpain

The transient friction in channel mean flows is the sum of two contributions,i.e.,the underlying laminar flow(ULf)and the purely turbulent component(pTC),and the contributions are analyzed separately by theoretical *** is found that,the transient friction may be higher or remarkably lower than that in equal-Reynolds number steady-state *** universal time constant for plane-parallel laminar flows is reported,and the role of the time constant in a turbulent mean flow is *** is shown that the time constant is related to the turbulence's frozen ***,a study of the logarithmic layer during the transient flow is accomplished,which shows that the logarithmic layer is destroyed.

关键词： transient friction transient flow unsteady channel flow

Robust hybrid bismuth perovskites as potential photocatalysts for overall water splitting

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4593-4601页

作者： Antonio j.Chacón-García Herme G.Baldovi Artem A.Babaryk Antonio Rodríguez-Diéguez Sergio Navalón Yolanda pérez Hermenegildo García patricia Horcajada Advanced porous Materials Unit IMDEA Energy InstituteAvda.Ramón y Cajal 328935 MóstolesMadridSpain Departamento de Química Universitat Politècnica de València46022 ValènciaSpain Departamento Química Inorgánica Universidad de Granada1807GranadaSpain Departamento de Biología y Geología Física y Química Inorgánica.ESCET.Universidad Rey Juan Carlos28933 MóstolesMadridSpain Instituto de tecnología química CSIC-UpV Universitat Politècnica de València(UPV)46022Spain

Organic-inorganic hybrid perovskites have gained great attention as promising photocatalysts for hydrogen ***,due to their poor stability in water,the use of aqueous hydrohalic acid solutions is specifically required for an efficient hydrogen ***,three novel photoactive lead-free hybrid perovskites based on bismuth and triazolium cations(denoted as IEf-15,IEf-16,and IEf-17(IEf stands for IMDEA energy frameworks))were synthesized and fully characterized(structural,compositional,optical,etc.).further,these solids were proposed as photocatalysts for the challenging gas phase overall water splitting(OWS)***,IEf-16 thin films exhibited a remarkable photocatalytic activity in both H_(2) and O_(2) evolution,as a consequence of its appropriate bandgap and energy-band alignment,achieving hydrogen evolution rates ofμmol·g_(H_(2))^(-)1846 and 360 after 24 h under ultraviolet-visible(UV-vis)irradiation or simulated solar irradiation,*** study additionally highlights the remarkable structural and photochemical stability of IEf-16 under different operational conditions(*** volume,irradiation and temperature),paving the way for green hydrogen production from OWS using perovskite-based photocatalysts.

关键词： bismuth-based hybrid perovskites thin films photocatalysis overall water splitting green hydrogen

Biomass gasification,catalytic technologies and energy integration for production of circular methanol:New horizons for industry decarbonisation

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Environmental Sciences 2024年第6期140卷 306-318页

作者： Luis f.Bobadilla Lola Azancot Miriam González-Castañ Estela Ruíz-López Laura pastor-pérez francisco j.Durán-Olivencia Runping Ye Katie Chong paula HBlanco-Sánchez Zenthao Wu Tomás R.Reina joséA.Odriozola Departamento de Química Inorgánica e Instituto de Ciencia de Materiales de Sevilla Centro Mixto CSIC-Universidad de SevillaAvda.Américo Vespucio 49Sevilla 41092Spain Departamento de Ingeniería Universidad Loyola AndalucíaAvda.de Las Universidades s/nSevilla 41704Spain Key Laboratory of jiangxi province for Environment and Energy Catalysis School of Chemistry and Chemical EngineeringNanchang UniversityNanchang330031China Energy and Bioproducts Research Institute(EBRI) Aston UniversityBirminghamB47ETUnited Kingdom Department of Chemical and process Engineering University of SurreyGuildfordGU27XHUnited Kingdom

The Intergovernmental panel on Climate Change(IpCC)recognises the pivotal role of renewable energies in the future energy system and the achievement of the zero-emission *** implementation of renewables should provide major opportunities and enable a more secure and decentralised energy supply *** fuels provide long-term solutions for the transport sector,particularly for applications where fuels with high energy density are *** addition,it helps reducing the carbon footprint of these sectors in the *** on biomass characteristics feedstock is essential for scaling-up gasification from the laboratory to *** review deals with the transformation biogenic residues into a valuable bioenergy carrier like biomethanol as the liquid sunshine based on the combination of modified mature technologies such as gasification with other innovative solutions such as membranes and microchannel *** abatement is a critical process in product gas upgrading since tars compromise downstream processes and equipment,for this,membrane technology for upgrading syngas quality is discussed in this *** reactor technology with the design of state-of-the-art multifunctional catalysts provides a path to develop decentralised biomethanol synthesis from biogenic ***,the development of a process chain for the production of(i)methanol as an intermediate energy carrier,(ii)electricity and(iii)heat for decentralised applications based on biomass feedstock flexible gasification,gas upgrading and methanol synthesis is analysed.

关键词： Biogenic residues Gasification Biomethanol Circular Economy Microreactors

Modelling dynamic pantograph loads with combined numerical analysis

在线全文

学校读者我要写书评

暂无评论

Railway Engineering Science 2024年第1期32卷 81-94页

作者： f.f.jackson R.Mishra j.M.Rebelo j.Santos p.Antunes j.pombo H.Magalhaes L.Wills M.Askill School of Computing and Engineering University of HuddersfieldHuddersfieldUK School of Computing and Engineering Institute of Railway ResearchUniversity of HuddersfieldHuddersfieldUK IDMEC Instituto Superior TecnicoUniversidade de LisboaLisbonPortugal ISEL Instituto Politecnico de LisboaLisbonPortugal Hitachi Rail Newton AycliffeUK Wabtec/Brecknell Willis ChardUK

Appropriate interaction between pantograph and catenary is imperative for smooth operation of electric *** heights of overhead lines to accommodate level crossings,overbridges,and tunnels pose significant challenges in maintaining consistent current collection performance as the pantograph aerodynamic profile,and thus aerodynamic load changes significantly with operational *** research aims to analyse the global flow characteristics and aerodynamic forces acting on individual components of an HSX pantograph operating in different configurations and orientations,such that the results can be combined with multibody simulations to obtain accurate dynamic insight into contact ***,computational fluid dynamics simulations are used to investigate the pantograph component loads in a representative setting,such as that of the recessed cavity on a Class 800 *** an aerodynamic perspective,this study indicates that the total drag force acting on non-fixed components of the pantograph is larger for the knuckle-leading orientation rather than the knuckle-trailing,although the difference between the two is found to reduce with increasing pantograph *** the aerodynamic loads acting on individual components with multibody tools allows for realistic dynamic insight into the pantograph *** results obtained show how considering aerodynamic forces enhance the realism of the models,leading to behaviour of the pantograph-catenary contact forces closely matching that seen in experimental tests.

关键词： pantograph-catenary interaction pantograph aerodynamics Computational fluid dynamics pantograph loads Current collection performance

Bulking Up the Bay-position Substituents Enables Enhanced Selectivity of C_(s)‑Symmetric Boron Subphthalocyanine−Subnaphthalocyanine Hybrids

在线全文

学校读者我要写书评

暂无评论

precision Chemistry 2024年第4期2卷 161-181页

作者： Nina f.farac Alan j.Lough Timothy p.Bender Department of Chemical Engineering and Applied Chemistry University of TorontoTorontoOntario M5S 3E5Canada Department of Chemistry University of TorontoTorontoOntario M5S 3H6Canada Department of Materials Science and Engineering University of TorontoTorontoOntario M5S 3E4Canada Department of Mechanical and Industrial Engineering University of TorontoTorontoOntario M5S 3G8Canada

The precise synthesis of subporphyrinoid hybrids withπ-expanded topologies and unique material properties plays a promising role in the design of functional ***,selective,and controllable routes to boron subphthalocyanine−subnaphthalocyanine hybrids,Bsub(pc_(3‑p)-Nc_(p))s,are desirable for this purpose yet synthetically challenging due to random mixtures of C_(s-),C_(3v-),and,in some cases,C_(1)-symmetric compounds that form during traditional statistical mixed ***,we addressed this issue by developing a sterically driven mixed cyclotrimerization with enhanced selectivity for the targeted C_(s)-symmetric hybrid and complete suppression of sterically crowded macrocyclic *** process,coupled with a rationally designed precursor bearing bulky phenyl substituents,enabled the synthesis and characterization of bay-position phenylated ph_(2)-(R_(p))_(8)Bsub(pc_(2)-Nc_(1))hybrids with halogens(Rp=Cl or f)in their peripheral isoindole *** selectivity ranged between 59 and 72%with remarkable yields,significantly higher than that of conventional mixed *** findings were augmented by theoretical calculations on precursor Lewis basicity as guiding principles into hybrid macrocycle ***,the incorporation of unfused phenyl groups and halogen atoms into the hybrid framework resulted in fine-tuned optical,structural,electronic,and electrochemical *** straightforward approach achieved improved selectivity and controlled narrowing of the product distribution,affording the efficient synthesis of structurally sophisticated Bsub(pc_(2)-Nc_(1))*** then expands the library of 3-dimensionalπ-extended macrocycles for use in a range of applications,such as in optoelectronic devices with precisely tailored optical properties.

关键词： subphthalocyanine hybrids low-symmetry aromatic macrocycle selective cyclotrimerization sterically driven chemistry broad absorption material properties

Towards efficient strain engineering of 2D materials:A four-points bending approach for compressive strain

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5317-5325页

作者： Hao Li félix Carrascoso Ana Borrás Gloria p.Moreno francisco j.Aparicio Ángel Barranco Andrés Castellanos Gómez Campus de Cantoblanco Instituto de Ciencia de Materiales de MadridC.Sor Juana Inés de la Cruz328049 MadridSpain Nanotechnology on Surfaces and plasma Lab Instituto de Ciencia de Materiales de Sevilla(CSIC-Universidad de Sevilla).C/Americo Vespucio 49E-41092 SevilleSpain Departamento de física Aplicada I Escuela Politécnica SuperiorUniversidad de Sevillac/Virgen deÁfrica 7E-41011 SevilleSpain

Strain engineering,as a powerful strategy to tune the optical and electrical properties of two-dimensional(2D)materials by deforming their crystal lattice,has attracted significant interest in recent years.2D materials can sustain ultra-high strains,even up to 10%,due to the lack of dangling bonds on their surface,making them ideal brittle *** remarkable mechanical resilience,together with a strong strain-tunable band structure,endows 2D materials with a broad optical and electrical response upon ***,strain engineering based on 2D materials is restricted by their nanoscale and strain quantification *** this study,we have modified a homebuilt three-points bending apparatus to transform it into a four-points bending apparatus that allows for the application of both compressive and tensile strains on 2D *** approach allows for the efficient and reproducible construction of a strain system and minimizes the buckling effect caused by the van der Waals interaction by adamantane encapsulation *** results demonstrate the feasibility of introducing compressive strain on 2D materials and the potential for tuning their optical and physical properties through this approach.

关键词： uniaxial compressive strain polymer encapsulation differential reflectance spectroscopy exciton tunability

Numerical analysis of high‑speed railway slab tracks using calibrated and validated 3D time‑domain modelling

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Railway Engineering Science 2024年第1期32卷 36-58页

作者： A.f.Esen O.Laghrouche p.K.Woodward D.Medina‑pineda Q.Corbisez j.Y.Shih D.p.Connolly Institute for High‑Speed Rail and System Integration University of LeedsLeeds LS29JTUK Institute for Infrastructure and Environment Heriot-Watt UniversityEdinburgh EH144ASUK Alstom Transport Saint‑OuenFrance Birmingham Centre for Railway Research and Education University of BirminghamBirmingham B152TTUK

Concrete slabs are widely used in modern railways to increase the inherent resilient quality of the tracks,provide safe and smooth rides,and reduce the maintenance *** this paper,the elastic performance of a novel slab trackform for high-speed railways is investigated using three-dimensional finite element modelling in *** is then compared to the performance of a ballasted ***,slab and ballasted track models are developed to replicate the full-scale testing of track *** the models are calibrated with the experimental results,the novel slab model is developed and compared against the calibrated slab track *** slab and ballasted track models are then extended to create linear dynamic models,considering the track geodynamics,and simulating train passages at various speeds,for which the Ledsgard documented case was used to validate the *** travelling at low and high speeds are analysed to investigate the track deflections and the wave propagation in the soil,considering the issues associated with critical *** train loading methods are discussed,and the most practical approach is retained and ***,correlations are made between the geotechnical parameters of modern high-speed rail and conventional *** is found that considering the same ground condition,the slab track deflections are considerably smaller than those of the ballasted track at high speeds,while they show similar behaviour at low speeds.

关键词： High-speed railways Slab track New ballastless track Ballasted track Critical speeds finite element modelling Calibration of numerical models