检索结果-南通市图书馆

Inflow and outflow permeability tests in a very soft clay under low stresses

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

j.urnal of Rock Mechanics and Geotechnical Engineering 2024年第8期16卷 3270-3283页

作者： j.W.S.Vargas f.A.B.Danziger f.R.Lopes T.Lunne federal University of Rio de j.neiro Rio de JaneiroBrazil Norwegian Geotechnical Institute OsloNorway

In situ inflow and outflow permeability tests with the BAT probe at SarapuíII soft clay test site are presented.A description of the BAT permeability test is provided,discussing its advantages and shortcomings,especially in the case of very soft clays under low *** pressures were monitored during probe installation and were found to be slightly lower than piezocone u2 pore pressures,consistent with the position of the *** role of filter tip saturation was investigated after the usual saturation procedure provided an unsatisfactory pore pressure response during probe *** show that the vacuum saturation procedure provides adequate response during installation and increases the reliability of the coefficient of permeability determination in early *** inflow and outflow tests yielded similar results,indicating that careful execution of the test can lead to good test repeatability regardless of the loading *** sequences of alternated inflow and outflow tests have yielded similar results,indicating that soil reconsolidation and filter clogging were negligible in the tests *** are presented concerning the relationship between index parameters and the in situ coefficient of permeability for SarapuíII clay,which plot outside the range of existing databases.

关键词： Permeability test Soft clay BAT probe Inflow and outflow tests

Stochastic seismic inversion and Bayesian facies classification applied to porosity modeling and igneous rock identification

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 918-935页

作者： fábio j.nior Damasceno fernandes Leonardo Teixeira Antonio fernando Menezes freire Wagner Moreira Lupinacci Exploratory Interpretation and Reservoir Characterization Group(GIECAR) Department of Geology and GeophysicsFederal Fluminense UniversityNiter oiRJ24210-346Brazil Petrobras Rio de JaneiroRJ20231-030Brazil National Institute of Science and Technology of Petroleum Geophysics(INCT-GP/CNPQ) Niter oiRJ24210-346Brazil

We apply stochastic seismic inversion and Bayesian facies classification for porosity modeling and igneous rock identification in the presalt interval of the Santos Basin. This integration of seismic and well-derived information enhances reservoir characterization. Stochastic inversion and Bayesian classification are powerful tools because they permit addressing the uncertainties in the model. We used the ES-MDA algorithm to achieve the realizations equivalent to the percentiles P10, P50, and P90 of acoustic impedance, a novel method for acoustic inversion in presalt. The facies were divided into five: reservoir 1,reservoir 2, tight carbonates, clayey rocks, and igneous rocks. To deal with the overlaps in acoustic impedance values of facies, we included geological information using a priori probability, indicating that structural highs are reservoir-dominated. To illustrate our approach, we conducted porosity modeling using facies-related rock-physics models for rock-physics inversion in an area with a well drilled in a coquina bank and evaluated the thickness and extension of an igneous intrusion near the carbonate-salt interface. The modeled porosity and the classified seismic facies are in good agreement with the ones observed in the wells. Notably, the coquinas bank presents an improvement in the porosity towards the top. The a priori probability model was crucial for limiting the clayey rocks to the structural lows. In Well B, the hit rate of the igneous rock in the three scenarios is higher than 60%, showing an excellent thickness-prediction capability.

关键词： Stochastic inversion Bayesian classification Porosity modeling Carbonate reservoirs Igneous rocks

miniSCIDOM: a scintillator-based tomograph for volumetric dose reconstruction of single laser-driven proton bunches

在线全文

学校读者我要写书评

暂无评论

High Power Laser Science and Engineering 2024年第2期12卷 41-50页

作者： A.Corvino M.Reimold E.Beyreuther f.-E.Brack f.Kroll j.Pawelke j.D.Schilz M.Schneider U.Schramm M.E.P.Umlandt K.Zeil T.Ziegler j.Metzkes-Ng Helmholtz-Zentrum Dresden–Rossendorf DresdenGermany Technische Universität Dresden DresdenGermany OncoRay–National Center for Radiation Research in Oncology Faculty of Medicine and University Hospital Carl Gustav CarusTUD Dresden University of TechnologyHelmholtz-Zentrum Dresden–RossendorfDresdenGermany Current affiliation:Institut Curie UniversitéPSLCNRS UMR3347OrsayFrance Current affiliation:Universitätsklinikum freiburg FreiburgGermany

Laser plasma accelerators(LPAs)enable the generation of intense and short proton bunches on a micrometre scale,thus offering new experimental capabilities to research fields such as ultra-high dose rate radiobiology or material *** spectrally broadband,laser-accelerated proton bunches allow for tailored volumetric dose deposition in a sample via single bunches to excite or probe specific sample *** rising number of such experiments indicates a need for diagnostics providing spatially resolved characterization of dose distributions with volumes of approximately 1 cm^(3) for single proton bunches to allow for fast online *** we present the scintillator-based miniSCIDOM detector for online single-bunch tomographic reconstruction of dose distributions in volumes of up to approximately 1 cm^(3).The detector achieves a spatial resolution below 500μm and a sensitivity of 100 *** detector performance is tested at a proton therapy cyclotron and an LPA proton *** experiments’primary focus is the characterization of the scintillator’s ionization quenching behaviour.

关键词： beam monitoring detectors laser-driven proton beams scintillator-based diagnostics ultra-high dose rate

Dynamical study of varicella-zoster virus model in sense of Mittag-Leffler kernel

在线全文

学校读者我要写书评

暂无评论

International j.urnal of Biomathematics 2024年第3期17卷 153-183页

作者： Qura Tul Ain Aziz Khan Thabet Abdelj.wad j.f.Gomez-Aguilar Saleem Riaz Department of Mathematics Guizhou University GuiyangGuizhou 550025P.R.China Department of Mathematics and Sciences Prince Sultan University P.O.Bor 66833 11586 RiyadhSaudi Arabia Department of Medical Research China Medical University Taichung 40402Taiwan CONACyT-Tecnologico Nacional de Mécico/CENIDET Interior Internado Palmira S/N Col.Palmira C.P.62490CuernavacaMorelosMécico IConsejo Academico Universidad Virtual CNCIMonterreyMécico School of Automation Northwestern Polytechnical University 170072 Xian P.R.China

The primary varicella-zoster virus(VzV)infection that causes chickenpox(also known as varicella),spreads quickly among people and,in severe circumstances,can cause to fever and *** this paper,the Mittag-Leffler fractional operator is used to examine the mathematical representation of the *** fractional-order differential equations are created in terms of the disease's dynamical analysis such as S:Susceptible,V:Vaccinated,E:Exposed,I:Infectious and R:*** derive the existence criterion,positive solution,Hyers-Ulam stability,and boundedness of results in order to examine the suggested fractional-order model's ***,some numerical examples for the VzV model of various fractional orders are shown with the aid of the generalized Adams-Bashforth-Moulton approach to show the viability of the obtained results.

关键词： Varicella-zoster virus model Hyers-Ulam stability ABC fractional operator Schauder fix point theory numerical analysis

Modelling dynamic pantograph loads with combined numerical analysis

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Railway Engineering Science 2024年第1期32卷 81-94页

作者： f.f.j.ckson R.Mishra j.M.Rebelo j.Santos P.Antunes j.Pombo H.Magalhaes L.Wills M.Askill School of Computing and Engineering University of HuddersfieldHuddersfieldUK School of Computing and Engineering Institute of Railway ResearchUniversity of HuddersfieldHuddersfieldUK IDMEC Instituto Superior TecnicoUniversidade de LisboaLisbonPortugal ISEL Instituto Politecnico de LisboaLisbonPortugal Hitachi Rail Newton AycliffeUK Wabtec/Brecknell Willis ChardUK

Appropriate interaction between pantograph and catenary is imperative for smooth operation of electric *** heights of overhead lines to accommodate level crossings,overbridges,and tunnels pose significant challenges in maintaining consistent current collection performance as the pantograph aerodynamic profile,and thus aerodynamic load changes significantly with operational *** research aims to analyse the global flow characteristics and aerodynamic forces acting on individual components of an HSX pantograph operating in different configurations and orientations,such that the results can be combined with multibody simulations to obtain accurate dynamic insight into contact ***,computational fluid dynamics simulations are used to investigate the pantograph component loads in a representative setting,such as that of the recessed cavity on a Class 800 *** an aerodynamic perspective,this study indicates that the total drag force acting on non-fixed components of the pantograph is larger for the knuckle-leading orientation rather than the knuckle-trailing,although the difference between the two is found to reduce with increasing pantograph *** the aerodynamic loads acting on individual components with multibody tools allows for realistic dynamic insight into the pantograph *** results obtained show how considering aerodynamic forces enhance the realism of the models,leading to behaviour of the pantograph-catenary contact forces closely matching that seen in experimental tests.

关键词： Pantograph-catenary interaction Pantograph aerodynamics Computational fluid dynamics Pantograph loads Current collection performance

Carbon Monoxide as C1 Building Block in fine Chemical Synthesis

在线全文

学校读者我要写书评

暂无评论

Chinese j.urnal of Chemistry 2024年第2期42卷 199-221页

作者： Rui M.B.Carrilho Mario j.f.Calvete Gabor Mikle Laszlo Kollar Mariette M.Pereira University of Coimbra Coimbra Chemistry CentreDepartment of ChemistryRua Larga3004-535 CoimbraPortugal Department of General and Inorganic Chemistry and ELKH-PTE Research Groupfor Selective Chemical Syntheses University of PecsIfjusag utja 6H-7624 PecsHungary

Carbon monoxide(CO)has become one of the most relevant and versatile renewable C1 building blocks for chemical synthesis,especially in the fine chemicals industry,due to the development of efficient and selective catalysts for its *** this review,we present a comprehensive critical analysis of the last 10 years literature on the use of CO as a renewable feedstock for fine chemicals *** review is organized by type of catalytic reaction,namely alkene and alkyne carbonylation,hydroformylation,carbonylation of aryl halides,carbonylative cross-coupling and C-H *** examples of the synthesis of relevant building blocks and/or known pharmaceuticals are *** is placed on examples of utilizing CO as the C1 building block in one or more catalytic *** catalyst used and the reaction conditions are consistently presented throughout all of the examples.

关键词： Carbon monoxide fine chemicals Carbonylation Hydroformylation C-H functionalization

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

j.urnal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.f.Wang C.j.Wang W.V.Yue Z.j.Zhang Z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of Water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration inj.ction with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

Comparative analysis of microstructure,mechanical,and corrosion properties of biodegradable Mg-3Y alloy prepared by selective laser melting and spark plasma sintering

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

j.urnal of Magnesium and Alloys 2024年第4期12卷 1496-1510页

作者： P.Minárik M.Zemková S.Šašek j.Dittrich M.Knapek f.Lukáˇc D.Koutný j.j.roš R.Král faculty of Mathematics and Physics Charles UniversityKe Karlovu 5Praha 12116Czech Republic Research Centre University ofŽilinaUniverzitná8215/1Žilina 01026Slovakia Institute of Plasma Physics of the Czech Academy of Sciences Za Slovankou 1782/318200 Praha 8Czech Republic Institute of Machine and Industrial Design Brno University of TechnologyTechnická2896/2Brno 61669Czech Republic

This work explored possibilities of biodegradable magnesium alloy Mg-3Y preparation by two modern powder metallurgy techniques–spark plasma sintering(SPS)and selective laser melting(SLM).The powder material was consolidated by both methods utilising optimised parameters,which led to very low porosity(∼0.3%)in the SLM material and unmeasurably low porosity in the SPS *** main aim of the study was the thorough microstructure characterisation and interrelation between the microstructure and the functional properties,such as mechanical strength,deformability,and corrosion *** materials showed comparable strength of∼110 MPa in tension and compression and relatively good deformability of∼9%and∼21%for the SLM and SPS materials,*** corrosion resistance of the SPS material in 0.1 M NaCl solution was superior to the SLM one and comparable to the conventional extruded *** digital image correlation during loading and the cross-section analysis of the corrosion layers revealed that the residual porosity and large strained grains have the dominant negative effect on the functional properties of the SLM *** the other hand,one of the primary outcomes of this study is that the SPS consolidation method is very effective in the preparation of the W3 biodegradable alloy,resulting in material with convenient mechanical and degradation properties that might find practical applications.

关键词： Magnesium Yttrium Powder metallurgy Microstructure Mechanical strength Corrosion resistance

Long-term Integration Ability of the Submillimeter Wave Astronomy Satellite(SWAS)Spectral Line Receivers

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第6期24卷 315-322页

作者： Bing-Ru Wang Di Li Paul f.Goldsmith j.ngwen Wu Chao-Wei Tsai Rudolf Schieder Gary j.Melnick National Astronomical Observatories Chinese Academy of SciencesBeijing 100101China University of Chinese Academy of Sciences Beijing 100049China Research Center for Astronomical Computing Zhejiang LaboratoryHangzhou 311100China j.t Propulsion Laboratory California Institute of TechnologyPasadenaCA 91109USA Institute for frontiers in Astronomy and Astrophysics Beijing Normal UniversityBeijing 102206China KOSMA I.Physik.InstitutUniversität zu KölnZülpicher Str.7750937 KölnGermany Center for Astrophysics|Harvard&Smithsonian 60 Garden StreetMS 66CambridgeMA 02138USA

The Submillimeter Wave Astronomy Satellite(SWAS)was the first space telescope capable of high spectral resolution observations of terahertz spectral *** have investigated the integration ability of its two receivers and spectrometer during five and a half years of on-orbit *** CI,O_(2),H_(2)O,and^(13)CO spectra taken toward all observed Galactic sources were *** present results are based on spectra with a total integration time of up to 2.72×10~4hr(■10~8s).The noise in the spectra is generally consistent with that expected from the radiometer equation,without any sign of approaching a noise *** noise performance reflects the extremely stable performance of the passively cooled front end as well as other relevant components in the SWAS instrument throughout its mission lifetime.

关键词： telescopes space vehicles:instruments instrumentation:miscellaneous ISM:lines and bands