检索结果-南通市图书馆

Tracking of horizontal alignment of the long and large diameter uncharged hole in NATM tunnel

Underground Space 2024年第3期16卷 18-28页

作者： min-Seong Kim Sean Seungwon lee Department of Energy and Resources Engineering Chonnam National UniversityGwangju 61186Republic of Korea Department of Earth Resources and Environmental Engineering Hanyang UniversitySeoul 04763Republic of Korea

The long and large diameter uncharged hole boring(LLB)method is a cut blasting method that minimizes blast-induced vibrations by creating long and large diameter uncharged holes at the excavation face of tunnels prior to tunnel *** in this method typically uses a 50 m long with a 382 mm diameter hammer bit in the horizontal direction at the tunnel ***,the significant weight and uni-directional rotation of the rod head,as well as variables such as geological characteristics,machine conditions,and inexperienced operators result in significant deviation from the target borehole alignment that hinders the vibration-dampening effect of the uncharged ***,since there is no method to verify the alignment of the boreholes until main tunnel construction,borehole misalignment is often not discovered until weeks after construction,which requires tunnel construction to cease until the equipment can be remobilized and an additional borehole be created,causing significant delays and increased costs for the entire tunnel *** this study,the borehole alignment tracking and ground exploration system(BGS)is developed to predict and monitor the quality and alignment of boreholes for cut blasting methods such as the LLB methods immediately after *** BGS was subsequently tested at a subway construction site to evaluate its performance in the *** measurements yielded by the BGS were compared with manually measured boring positions at every 5 m along the *** the BGS showed a maximum deviation of approximately 12%at a local point where the hole surface was relatively rough,the accuracy for the final boring position was approximately 97%,demonstrating excellent precision of the alignment tracking *** BGS demonstrates excellent performance in predicting ground conditions and the boring quality of a cut hole immediately after drilling,and shows promise in various other applications for monitoring borehole alignment.

关键词： Tunnel blasting LLB method Drilling deviation Vertical sagging Horizontal alignment tracking BGS

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Weighted Forwarding in Graph Convolution Networks for Recommendation Information Systems

引用

Computers, Materials & Continua 2024年第2期78卷 1897-1914页

作者： Sang-min lee Namgi Kim Department of Computer Science Kyonggi UniversitySuwonKorea

Recommendation Information Systems(RIS)are pivotal in helping users in swiftly locating desired content from the vast amount of information available on the *** Convolution Network(GCN)algorithms have been employed to implement the RIS ***,the GCN algorithm faces limitations in terms of performance enhancement owing to the due to the embedding value-vanishing problem that occurs during the learning *** address this issue,we propose a Weighted Forwarding method using the GCN(WF-GCN)*** proposed method involves multiplying the embedding results with different weights for each hop layer during graph *** applying the WF-GCN algorithm,which adj.sts weights for each hop layer before forwarding to the next,nodes with many neighbors achieve higher embedding *** approach facilitates the learning of more hop layers within the GCN *** efficacy of the WF-GCN was demonstrated through its application to various *** the MovieLens dataset,the implementation of WF-GCN in LightGCN resulted in significant performance improvements,with recall and NDCG increasing by up to+163.64%and+132.04%,***,in the *** dataset,LightGCN using WF-GCN enhanced with WF-GCN showed substantial improvements,with the recall and NDCG metrics rising by up to+174.40%and+169.95%,***,the application of WF-GCN to Self-supervised Graph Learning(SGL)and Simple Graph Contrastive Learning(SimGCL)also demonstrated notable enhancements in both recall and NDCG across these datasets.

关键词： Deep learning graph neural network graph convolution network graph convolution network model learning method recommender information systems

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Omni-functional simultaneous interfacial treatment for enhancing stability and outgassing suppression of lithium-ion batteries

引用

j.urnal of Energy Chemistry 2024年第7期94卷 677-687页

作者： Youbean lee Chanj.o Park Kyoungmin min Kwangj.n Park Department of Mechanical Engineering Gachon UniversityGyeonggi-do 13120Republic of Korea Department of Battery Engineering Gachon UniversityGyeonggi-do 13120Republic of Korea School of Mechanical Engineering Soongsil UniversitySeoul 06978Republic of Korea

Ni-rich layered oxides in lithium-ion batteries have problems with gas generation and electrochemical performance reduction due to residual lithium's reaction on the surface with the *** address this issue,in this study,the Acid solvent evaporation(AsE)method has been proposed as a potential method to remove residual lithium while promoting the formation of a new LiNO_(3)-derived coating layer on the cathode *** reduction of residual lithium using the ASE method and the construction of a LiNO_(3)-derived coating layer suppresses gas evolution caused by the side effects of the electrolyte,improves electrochemical performance,and improves thermal stability by facilitating the smooth movement of lithium ***,the structural stability and resistance change due to the LiNO_(3)-derived coating layer effects is guaranteed through cycling and DCIR of the pouch *** a result,compared to Pristine,the capacity retention of coin cells increased by 8%after 100 cycles,and pouch cells increased by 25%after 160 *** addition,after cycling the pouch cell,CO_(2) gas has significantly reduced by about 30%compared to Pristine using gas *** ASE method effectively forms a robust LiNO_(3)-derived coating layer on the cathode active material,which helps minimize electrolyte reactivity,suppress ,CO_(2) emissions,enhance surface structure stability,improve thermal stability,and improveoverallbatteryperformance.

关键词： Lithium-ion batteries Ni-rich NCM Acid solvent evaporation LiNO_(3)-derived coating Gasevolution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Quantum vector DC magnetometry via selective phase accumulation

引用

Science China(Physics,Mechanics & Astronomy) 2024年第10期67卷 12-22页

作者： min Zhuang Sij.e Chen j.ahao Huang Chaohong lee Institute of Quantum Precision Measurement State Key Laboratory of Radio Frequency Heterogeneous IntegrationCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen 518060China Quantum Science Center of Guangdong-Hong Kong-Macao Greater Bay Area(Guangdong) Shenzhen 518045China Laboratory of Quantum Engineering and Quantum Metrology School of Physics and AstronomySun Yat-sen University(Zhuhai Campus)Zhuhai 519082China

Precision measurement of magnetic fields is a crucial issue in both fundamental scientific research and practical sensing *** sensitive detection of a vector magnetic field poses a significant challenge in quantum magnetometry,particularly in estimating a vector DC magnetic field with high ***,we propose a comprehensive protocol for quantum vector DC magnetometry,utilizing selective phase accumulation in both non-entangled and entangled quantum *** upon the principles of Ramsey interferometry,our protocol enables the selective accumulation of phase for a specific magnetic field component by incorporating a meticulously designed pulse *** the individual measurement scheme,we employ three individual quantum interferometries to independently estimate each of the three magnetic field ***,in the simultaneous measurement scheme,the application of a pulse sequence along different directions enables the simultaneous estimation of all three magnetic field components using only one quantum ***,by employing an entangled state(such as the Greenberger-Horne-Zeilinger state)as the input state,the measurement precisions of all three components may reach the Heisenberg *** study not only establishes a general protocol for measuring vector magnetic fields using quantum probes,but also presents a viable pathway for achieving entanglement-enhanced multi-parameter estimation.

关键词： magnetometry quantum interferometry entanglement-enhanced quantum metrology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Novel fabrication techniques for ultra-thin silicon based flexible electronics

引用

International j.urnal of Extreme Manufacturing 2024年第4期6卷 116-149页

作者： j. Young lee j.ong Eun j. Chanwoo lee Sang min Won Ki j.n Yu School of Electrical and Electronic Engineering Yonsei University50 Yonsei-roSeodaemunguSeoul 03722Republic of Korea Department of Electrical and Computer Engineering Sungkyunkwan UniversitySuwon 16419Republic of Korea YU-Korea Institute of Science and Technology(KIST)Institute Yonsei University50Yonsei-roSeodaemun-guSeoul 03722Republic of Korea

Flexible electronics offer a multitude of advantages,such as flexibility,lightweight property,portability,and high *** unique properties allow for seamless applications to curved and soft surfaces,leading to extensive utilization across a wide range of fields in consumer *** applications,for example,span integrated circuits,solar cells,batteries,wearable devices,bio-implants,soft robotics,and biomimetic ***,flexible electronic devices have been developed using a variety of materials such as organic,carbon-based,and inorganic semiconducting ***(Si)owing to its mature fabrication process,excellent electrical,optical,thermal properties,and cost efficiency,remains a compelling material choice for flexible ***,the research on ultra-thin Si in the context of flexible electronics is studied rigorously *** thinning of Si is crucially important for flexible electronics as it reduces its bending stiffness and the resultant bending strain,thereby enhancing flexibility while preserving its exceptional *** review provides a comprehensive overview of the recent efforts in the fabrication techniques for forming ultra-thin Si using top-down and bottom-up approaches and explores their utilization in flexible electronics and their applications.

关键词： flexible electronics silicon fabrication technique top-down approach bottom-up approach

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of a High‑Performance Composite Solid Electrolyte Through In‑Situ Polymerization within a Self‑Supported Porous Garnet Framework

引用

Nano-Micro Letters 2024年第5期16卷 56-70页

作者： An‑Giang Nguyen min‑Ho lee j.ekook Kim Chan‑j.n Park Department of Materials Science and Engineering Chonnam National University77 Yongbong‑roBuk‑guGwangju 61186South Korea

Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).However,concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for *** overcome these challenges,we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZT)to produce the *** synergy of the continuous conductive LLZT network,well-organized polymer,and their interface can enhance the ionic conductivity of the CSE at room ***,the in-situ polymerization process can also con-struct the integration and compatibility of the solid electrolyte–solid electrode *** synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm^(-1),a significant lithium transference number of 0.627,and exhibited electrochemical stability up to 5.06 V ***/Li+at 30℃.Moreover,the Li|CSE|LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cell delivered a discharge capacity of 105.1 mAh g^(-1) after 400 cycles at 0.5 C and 30℃,corresponding to a capacity retention of 61%.This methodology could be extended to a variety of ceramic,polymer electrolytes,or battery systems,thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.

关键词： Scalable tape-casting method Self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12) Composite solid electrolyte LiF-and B-rich interphase layers

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Factor analysis of recent maj.r heatwaves in East Asia

引用

Geoscience Frontiers 2024年第1期15卷 374-383页

作者： Arim Yoon j.ongwon Kim j.oyeop lee Hyun min Sung j.-Woo Hong Seung-Ki min j.nhong lee j.nkyu Hong Ecosystem-Atmosphere Process Laboratory Department of Atmospheric SciencesYonsei UniversitySeoul 03722Republic of Korea National Institute of Meteorological Sciences Jeju 63568Republic of Korea Korea Adaptation Center for Climate Korea Environment InstituteSejong 30121Republic of Korea Division of Environmental Science and Engineering Pohang University of Science and TechnologyPohang 37673Republic of Korea Max Planck Institute for Meteorology Hamburg 20146Germany Institute for Convergence Research and Education in Advanced Technology Yonsei UniversitySeoulRepublic of Korea

Heatwaves(HWs)present a maj.r hazard to our society and more extreme heatwaves are expected with future climatic ***,it is important to improve our understanding of the underlying processes that drive HWs,in order to boost our socioeconomic-ecological *** this study,we quantified the influences of key driving factors(large-scale atmospheric circulation,soil moisture,and sea surface temperature)and their synergies on recent heatwaves in East *** conducted a factor separation analysis for three recent HW events by constraining the key factors in the regional Weather Research and Forecasting model with their climatologies or pseudo-observations in different *** study showed distinct spatial variations in the HW-controlling factors in East *** synergistic interaction of large-scale circulation and soil moisture was the most important factors in the 2013 Chinese *** the 2018 HWs in Korea and j.pan,the same stagnant large-scale atmospheric circulation played a dominant role in driving the HW *** land-atmosphere coupling via soil moisture,its interaction with circulation,and SST exhibited stronger influences during the Korean HW than the j.panese *** analysis also revealed temporal variations in the factors driving Korean and Chinese HWs due to typhoon passage and other multiple processes over heterogeneous surfaces(i.e.,topographically induced Foehn winds,large-scale warm advection from the warm ocean,spatial differences in soil moisture).Our findings suggest that future heatwave-related studies should consider interactive contributions of key factors,their interplay with surface heterogeneities of complex terrain.

关键词： Heatwave East Asia Large-scale circulation Soil moisture Sea surface temperature Synergistic impacts

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on tensile and bending properties of high-Al-containing Mg alloys

引用

j.urnal of Magnesium and Alloys 2024年第2期12卷 779-793页

作者： Sumi j. Gyo Myeong lee j.ng Un lee Young min Kim Sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Magnesium Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on the uniaxial tensile and three-point bending properties of extruded Mg alloys containing high Al *** extruded Mg–9Al–1Zn–0.3Mn(AZ91)alloy contains lamellar-structured Mg_(17)Al_(12)discontinuous precipitates along the grain boundaries,which are formed via static precipitation during natural air *** extruded Mg–11Al–1Zn–0.3Mn(AZ111)alloy contains spherical Mg_(17)Al_(12)precipitates at the grain boundaries and inside the grains,which are formed via dynamic precipitation during *** to inhomogeneous distribution of precipitates,the AZ111 alloy consists of two different precipitate regions:precipitate-rich region with numerous precipitates and finer grains and precipitate-scarce region with a few precipitates and coarser *** AZ111 alloy exhibits a higher tensile strength than the AZ91 alloy because its smaller grain size and more abundant precipitates result in stronger grain-boundary hardening and precipitation hardening effects,***,the tensile elongation of the AZ111 alloy is lower than that of the AZ91 alloy because the weak cohesion between the dynamic precipitates and the matrix facilitates the crack initiation and *** bending,a macrocrack initiates on the outer surface of bending specimen in both *** AZ111 alloy exhibits higher bending yield strength and lower failure bending strain than the AZ91 *** bending specimens of the AZ91 alloy have similar bending formability,whereas those of the AZ111 alloy exhibit considerable differences in bending formability and crack propagation behavior,depending on the distribution and number density of precipitates in the *** bending specimens of the AZ111 alloy,it is found that the failure bending strain(ε_(f,bending))is inversely proportional to the area fraction of precipitates in the outer zone of bending specimen(A_(ppt)),with a relation

关键词： Mg–Al alloy Extrusion Bending Precipitation Microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Self-assembly of tau fragments as a key pathologic event in tauopathies

引用

Neural Regeneration Research 2024年第12期19卷 2565-2566页

作者： Ly Thi Huong Luu Le j.ng Hoon lee min j.e lee Department of Biochemistry and Molecular Biology Seoul National University College of MedicineSeoulKorea

Tau protein is encoded by the microtubuleassociated protein tau(MAPT)gene and stabilizes microtubules in the *** has unique biophysical properties that make it both highly water-soluble and positively *** tau is an intrinsically disordered protein lacking defined secondary structures,it can acquire highly organized-sheet structures and stack into a filamentous inclusion such as a paired helical filament(PHF).

关键词： tau pathologic assembly

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Intelligent structured nanocomposite adhesive for bioelectronics and soft robots

引用

Nano Research 2024年第2期17卷 534-549页

作者： Yeon Soo lee min-Seok Kim Da Wan Kim Changhyun Pang School of Chemical Engineering Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Mechanical Metrology Group Korea Research Institute of Standards and ScienceDaejeon 34113Republic of Korea Department of Electronic Engineering Korea National University of TransportationChungbuk 27469Republic of Korea Samsung Advanced Institute for Health Sciences and Technology Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea

The remarkable functionality of biological systems in detecting and adapting to various environmental conditions has inspired the design of the latest electronics and robots with advanced *** review focuses on intelligent bio-inspired strategies for developing soft bioelectronics and robotics that can accommodate nanocomposite adhesives and integrate them into biological *** underlying principles of the material and structural design of nanocomposite adhesives were investigated for practical applications with excellent functionalities,such as soft skin-attachable health care sensors,highly stretchable adhesive electrodes,switchable adhesion,and untethered soft *** addition,we have discussed recent progress in the development of effective fabrication methods for micro/nanostructures for integration into devices,presenting the current challenges and prospects.

关键词： biomimetics bio-adhesive switchable adhesion bioelectronics nanocomposite soft robotics

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：