检索结果-南通市图书馆

Energy & Environmental Materials 2024年第1期7卷 147-152页

作者： Sun Kyung Hwang ik jae park Se Won Seo jae Hyun park So Jeong park Jin Young Kim Department of Materials Science and Engineering Seoul National UniversitySeoul 08826Korea Department of Applied Physics Sookmyung Women's UniversitySeoul 04310Korea Research Institute of Advanced Materials and Systems Sookmyung Women's UniversitySeoul 04310Korea Research Institute of Advanced Materials(RIAM) Seoul National UniversitySeoul 08826Korea

In spite of the high potential economic feasibility of the tandem solar cells consisting of the halide perovskite and the kesterite Cu2ZnSn(S,Se)4(CZTSSe),they have rarely been demonstrated due to the difficulty in implementing solution-processed perovskite top cell on the rough surface of the bottom ***,we firstly demonstrate an efficient monolithic two-terminal perovskite/CZTSSe tandem solar cell by significantly reducing the surface roughness of the electrochemically deposited CZTSSe bottom *** surface roughness(R_(rms))of the CZTSSe thin film could be reduced from 424 to 86 nm by using the potentiostatic mode rather than using the conventional galvanostatic mode,which can be further reduced to 22 nm after the subsequent ion-milling *** perovskite top cell with a bandgap of 1.65 eV could be prepared using a solution process on the flattened CZTSSe bottom cell,resulting in the efficient perovskite/CZTSSe tandem solar *** the current matching between two subcells involving the thickness control of the perovskite layer,the best performing tandem device exhibited a high conversion efficiency of 17.5%without the hysteresis effect.

关键词： CZTSSe monolithic tandem solar cells perovskite solution process surface roughness control

Tailoring uniform γ-MnO2 nanosheets on highly conductive three-dimensional current collectors for high-performance supercapacitor electrodes

在线全文

学校读者我要写书评

暂无评论

Nano Research 2015年第3期8卷 990-1004页

作者： Sangbaek park Hyun-Woo Shim Chan Woo Lee Hee Jo Song ik jae park jae-Chan Kim Kug Sun Hong Dong-Wan Kim Department of Materials Science and Engineering Seoul National University Seou1151-744 R. O. Korea School of Civil Environmental and Architectural Engineering Korea University Seou1136-713 R. O. Korea

Recent efforts have focused on the fabrication and application of three- dimensional （3-D） nanoarchitecture electrodes, which can exhibit excellent electrochemical performance. Herein, a novel strategy towards the design and synthesis of size- and thickness-tunable two-dimensional （2-D） MnO2 nanosheets on highly conductive one-dimensional （l-D） backbone arrays has been developed via a facile, one-step enhanced chemical bath deposition （ECBD） method at a low temperature （-50 ℃）. Inclusion of an oxidizing agent, BrO3-, in the solution was crucial in controlling the heterogeneous nucleation and growth of the nanosheets, and in inducing the formation of the tailored and uniformly arranged nanosheet arrays. We fabricated supercapacitor devices based on 3-D MnO2 nanosheets with conductive Sb-doped SnO2 nanobelts as the backbone. They achieved a specific capacitance of 162 F·g-1 at an extremely high current density of 20 A·g% and good cycling stability that shows a capacitance retention of -92% of its initial value, along with a coulombic efficiency of almost 100% after 5,000 cycles in an aqueous solution of I M Na2SO4. The results were attributed to the unique hierarchical structures, which provided a short diffusion path of electrolyte ions by means of the 2-D sheets and direct electrical connections to the current collector by 1-D arrays as well as the prevention of aggregation by virtue of the well-aligned 3-D structure.

关键词： nanosheets manganese oxide chemical bath deposition SnO2 nanobelts supercapacitor

Tailored BiVO_(4)/In_(2)O_(3)nanostructures with boosted charge separation ability toward unassisted water splitting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Carbon Energy 2023年第6期5卷 45-59页

作者： Mi Gyoung Lee Jin Wook Yang ik jae park Tae Hyung Lee Hoonkee park Woo Seok Cheon Sol ALee Hyungsoo Lee Su Geun Ji Jun Min Suh Jooho Moon Jin Young Kim Ho Won Jang Department of Materials Science and Engineering Research Institute of Advanced MaterialsSeoul National UniversitySeoulRepublic of Korea Country Department of Applied Physics Sookmyung Women's UniversitySeoulRepublic of Korea Department of Materials Science and Engineering Yonsei UniversitySeoulRepublic of Korea Advanced Institute of Convergence Technology Seoul National UniversitySuwonRepublic of Korea

The development of new heterostructures with high photoactivity is a breakthrough for the limitation of solar-driven water ***,we first introduce indium oxide(In_(2)O_(3))nanorods(NRs)as a novel electron transport layer for bismuth vanadate(BiVO_(4))with a short charge diffusion ***_(2)O_(3)NRs reinforce the electron transport and hole blocking of BiVO_(4),surpassing the state-of-the-art photoelectrochemical performances of BiVO_(4)-based ***,a tannin-nickel-iron complex(TANF)is used as an oxygen evolution catalyst to speed up the reaction *** final TANF/BiVO_(4)/In_(2)O_(3)NR photoanode generates photocurrent densities of 7.1 mAcm^(−2) in sulfite oxidation and 4.2 mA cm^(−2) in water oxidation at 1.23 V versus the reversible hydrogen ***,the“artificial leaf,”which is a tandem cell with a perovskite/silicon solar cell,shows a solar-to-hydrogen conversion efficiency of 6.2%for unbiased solar water *** reveal significant advances in the photoactivity of TANF/BiVO_(4)/In_(2)O_(3)NRs from the tailored nanostructure and band structure for charge dynamics.

关键词： bismuth vanadate heterojunction indium oxide nanostructure photoelectrochemical water splitting

Effect of Sub-T_g Annealing on the Corrosion Resistance of the Cu–Zr Amorphous Alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2018年第3期31卷 273-280页

作者： Sang-Soo Shin Hong-Kyu Kim jae-Chul Lee ik-Min park Department of Materials Science and Engineering Pusan National University Advanced Analysis Center Korea Institute of Science and Technology Department of Materials Science and Engineering Korea University

Despite the economy of material cost and excellent toughness of Cu-based amorphous alloys,especially CusoZrso,their poor corrosion resistance to a chloride medium limits their widespread *** this study,corrosion tests were performed on the CusoZrso amorphous alloy with different degrees of short-range order,which were prepared by annealing below the glass transition temperature（Tg）.It was found that the corrosion resistance of amorphous alloys is improved to a significant level when the alloys were heated below *** studies showed that thermally activated relaxation process of created disorder,which occurs during sub-Tg annealing,is responsible for the improvement in the corrosion *** dynamics simulations performed on the Cu-Zr amorphous alloys demonstrated that the relaxation process of the alloys is associated with the formation of energetically stable icosahedra and icosahedron-like *** study highlights the effects of sub-Tg annealing on the improvement in the corrosion resistance of the amorphous alloys from the viewpoint the relaxation process of the short-range orders.

关键词： Amorphous alloys Corrosion Annealing Molecular dynamics Electrochemical performance

Development of a Seaweed Species-Selection Index for Successful Culture in a Seaweed-Based Integrated Aquaculture System

在线全文

学校读者我要写书评

暂无评论

Journal of Ocean University of China 2013年第1期12卷 125-133页

作者： Yun Hee Kang jae Ran Hwang ik Kyo Chung Sang Rul park Marine and Environmental Research Institute Jeju National University Marine Environmental Research Division National Fisheries Research and Development Institute Division of Earth Environmental System Pusan National University School of Marine Biomedical Sciences Jeju National University

Integrated multi-trophic aquaculture (IMTA) has been proposed as a concept that combines the cultivation of fed aquaculture species (e.g., finfish/shrimp) with extractive aquaculture species (e.g., shellfish/seaweed). In seaweed-based integrated aquaculture, seaweeds have the capacity to reduce the environmental impact of nitrogen-rich effluents on coastal ecosystems. Thus, selection of optimal species for such aquaculture is of great importance. The present study aimed to develop a seaweed species-selection index for selecting suitable species in seaweed-based integrated aquaculture system. The index was synthesized using available literature-based information, reference data, and physiological seaweed experiments to identify and prioritize the desired species. Undaria pinnatifida, Porphyra yezoensis and Ulva compressa scored the highest according to a seaweed-based integrated aquaculture suitability index (SASI). Seaweed species with the highest scores were adjudged to fit the integrated aquaculture systems. Despite the application of this model limited by local aquaculture environment, it is considered to be a useful tool for selecting seaweed species in IMTA.

关键词： seaweed IMTA species-selection model water temperature physiological characteristics uptake rate

Mechanically resilient,alumina-reinforced carbon nanotube arrays for in-plane shock absorption in micromechanical devices

在线全文

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2023年第3期9卷 73-81页

作者： Eunhwan Jo Hojoon Lee jae-ik Lee Jongbaeg Kim School of Mechanical Engineering Yonsei University50 Yonsei-roSeodaemun-guSeoul 03722Republic of Korea Department of Neurosurgery Massachusetts General HospitalHarvard Medical School25 Shattuck StBostonMA 02115USA

Microelectromechanical systems(MEMS)are of considerable interest due to their compact size and low power consumption when used in modern *** devices intrinsically incorporate three-dimensional(3D)microstructures for their intended operations;however,these microstructures are easily broken by mechanical shocks accompanying high-magnitude transient acceleration,inducing device *** various structural designs and materials have been proposed to overcome this limit,developing a shock absorber for easy integration into existing MEMS structures that effectively dissipates impact energy remains ***,a vertically aligned 3D nanocomposite based on ceramic-reinforced carbon nanotube(CNT)arrays is presented for in-plane shock-absorbing and energy dissipation around MEMS *** geometrically aligned composite consists of regionally-selective integrated CNT arrays and a subsequent atomically thick alumina layer coating,which serve as structural and reinforcing materials,*** nanocomposite is integrated with the microstructure through a batch-fabrication process and remarkably improves the in-plane shock reliability of a designed movable structure over a wide acceleration range(0-12,000g).In addition,the enhanced shock reliability through the nanocomposite was experimentally verified through comparison with various control devices.

关键词： shock plane arrays

Observation of baroclinic eddies southeast of Okinawa Island

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Earth Sciences 2008年第12期51卷 1802-1812页

作者： park jae-Hun Graduate School of Oceanography University of Rhode Island

In the region southeast of Okinawa, during May to July 2001, a cyclonic and an anticyclonic eddy were observed from combined measurements of hydrocasts, an upward-looking moored acoustic Doppler current profiler (MADCP), pressure-recording inverted echo sounders (PIESs), satellite altimetry, and a coastal tide gauge. The hydrographic data showed that the lowest/highest temperature (T) and salinity (S) anomalies from a 13-year mean for the same season were respectively ?3.0/+2.5°C and ?0.20/+0.15 psu at 380/500 dbar for the cyclonic/anticyclonic eddies. From the PIES data, using a gravest empirical mode method, we estimated time-varying surface dynamic height (D) anomaly referred to 2000 dbar changing from ?20 to 30 cm, and time-varying T and S anomalies at 500 dbar ranging through about ±2 and°C ±0.2 psu, respectively. The passage of the eddies caused variations of both satellite-measured sea surface height anomaly (SSHA) and tide-gauge-measured sea level anomaly to change from about ?20 to 30 cm, consistent with the D anomaly from the PIESs. Bottom pressure sensors measured no variation related to these eddy activities, which indicated that the two eddies were dominated by baro-clinicity. Time series of SSHA map confirmed that the two eddies, originating from the North Pacific Subtropical Countercurrent region near 20°–30°N and 150°–160°E, traveled about 3000 km for about 18 months with mean westward propagation speed of about 6 cm/s, before arriving at the region southeast of Okinawa Island.

关键词： baroclinic eddy southeast of Okinawa Island PIES ADCP

Synergistically coupling of Ni–Fe LDH arrays with hollow Co–Mo sulfide nanotriangles for highly efficient overall water splitting

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 522-532页

作者： Yun jae Lee Seung-Keun park Department of Advanced Materials Engineering Chung-Ang UniversityAnseongGyeonggi-do17546Republic of Korea Department of Intelligent Energy and Industry Chung-Ang University84 Heukseok-ro Dongjak-guSeoul06974Republic of Korea Western Seoul Center Korea Basic Science Institute150 Bugahyeon-roSeodaemun-guSeoul03759Republic of Korea

Developing bifunctional catalysts that can catalyze both oxygen evolution reaction(OER)and hydrogen evolution reaction(HER)is pivotal to commercializing large-scale water ***,a novel hollow nanotriangle composed of NiFe LDH-CoMoS_(x) heterojunction(H-CMSx@NiFe LDH)is proposed as a highly efficient bifunctional electrocatalyst for both OER and *** fabricate a heterojunction system,ultra-thin nickel–iron layered double hydroxide(NiFe LDH)nanosheets are uniformly electrodeposited onto a metal–organic framework-derived hollow CoMoS_(x) *** strong coupling of CoMoS_(x) and NiFe LDH catalysts forms the intimate heterojunction interfaces to facilitate interfacial charge transfer,which is favorable to enhance the bifunctional catalytic ***,the large void of CoMoS_(x) nanotriangles and interconnected ultra-thin NiFe LDH nanosheets result in good electrolyte penetration and gas ***,the as-prepared H-CMSx@NiFe LDH on nickel foam(NF)exhibits an impressive catalytic activity and durability for OER and HER activities,delivering a current density of 100 mA·cm^(−2) at the small overpotentials of 214 and 299 mV in OER and HER,***,H-CMSx@NiFe LDH/NF proves to be an effective electrode for an alkaline electrolyzer,as a voltage of only 1.99 V is enough to achieve a current density voltage of only 1.99 V is enough to achieve a current density of 400 mA·cm^(−2) with no degradation in performance over 50 h.

关键词： Overall water splitting Metal-organic framework Molybdenum sulfide Layered double hydroxide Heterojunction

Novel N-doped multichannel carbon nanofiber architecture with porous CoS nanoprisms for high-performance potassium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 971-983页

作者： jae Bong Lim Seung-Keun park Department of Advanced Materials Engineering Chung-Ang UniversityGyeonggi-do17546Republic of Korea Department of Intelligence Energy and Industry Chung-Ang UniversitySeoul06974Republic of Korea Western Seoul Center Korea Basic Science InstituteSeoul03759Republic of Korea

Potassium-ion batteries(PIBs)have gained significant attention as an alternative to lithium-ion batteries(LIBs)due to the abundance of potassium(K)and low ***,the difficulty in finding appropriate electrode materials that can efficiently store the larger K ions has hindered their practical ***,we report a novel anode material,N-doped multichannel carbon nanofibers embedded with porous CoS nanoprisms(CSP@NMCNF),for high-performance *** CSP@NMCNF was synthesized using a two-step strategy comprising of the electrospinning of Co acetate hydroxide nanoprism/binary polymer blend and a subsequent heat *** porous CoS nanoprisms with an anisotropic morphology were well aligned along the length axis of the N-doped multichannel carbon nanofibers,thus ensuring their structural stability during the repeated charge-discharge *** addition,numerous pores facilitated the transport of electrons and ***,the CSP@NMCNF anode exhibited excellent electrochemical performance,delivering a high specific capacity of 368 mAh·g^(-1)at 0.5 A·g^(-1)after 200 cycles and excellent rate capability(232 mAh·g^(-1)at 2.0 A·g^(-1)).

关键词： K-ion batteries Cobalt sulfide Multichannel structured composite Electrospinning Nanoprism Porous structure

Effect of CaF2 content in refining slag on formation behavior of spinel inclusion in Ni-Cr-V-alloyed special steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2018年第2期25卷 157-163页

作者： jae-hong Shin Joo-hyun park Department of Materials Engineering Hanyang UniversityAnsan 426-791 Korea

The influence of CaF2 content on the formation behavior of spinel inclusions in the Ni-Cr-V-alloyed special steel was presented. The spinel was not formed at CaF2 content lower than 10 wt%. However, it was formed at early stage when the CaF2 content was greater than 30 wt%, followed by a modification to the aluminosilicate-type inclusions. Because the slag was saturated by MgO, the activity of MgO was unity irrespective of CaF2 content in the slag. Thus, Mg was transferred from slag to metal phase. Mg transferred to molten steel reacted with Al2O3-rich inclusions to form ***2O3 spinel. However, the spinel inclusion was modified to aluminosilicate-type inclusions by the reaction with Si and Ca transferred from slag to molten steel about 2-3 h later.

关键词： Spinel inclusion Refining slag CaF2 content Ni-Cr-V-alloyed special steel