检索结果-南通市图书馆

Unlocking the Potential of Poly(butylene succinate) through Incorporation of Vitrimeric Network Based on Dynamic Imine Bonds

引用

Chinese Journal of Polymer Science 2024年第10期42卷 1414-1424页

作者： Shan-Song Wu hui-juan lu Yi-Dong Li Shui-Dong Zhang Jian-Bing Zeng Chongqing Key Laboratory of Soft-Matter Material Manufacturing School of Chemistry and Chemical Engineering Southwest University School of Mechanical and Automotive Engineering South China University of Technology

Poly(butylene succinate)(PBS) exhibits many advantages, such as renewability, biodegradability, and impressive thermal and mechanical properties, but is limited by the low melt viscosity and strength resulted from the linear structure. To address this, vitrimeric network was introduced to synthesize PBS vitrimers(PBSVs) based on dynamic imine bonds through melt polymerization of hydroxyl-terminated PBS with vanillin derived imine containing compound and hexamethylene diisocyanate using trimethylolpropane as a crosslinking monomer. PBSVs with different crosslinking degrees were synthesized through changing the content of the crosslinking monomer. The effect of crosslinking degree on the thermal, theological, mechanical properties, and stress relaxation behavior of the PBSVs was studied in detail. The results demonstrated that the melt viscosity, melt strength, and heat resistance were enhanced substantially without obvious depression in crystallizability, thermal stability, and mechanical properties through increasing crosslinking degree. In addition, the PBSVs exhibit thermal reprocessability with mechanical properties recovered by more than 90% even after processing for three times. Furthermore, PBSV with improved melt properties shows significantly improved foamability compared to commercial PBS. This research contributes to the advancement of polymer technology by successfully developing PBS vitrimers with improved properties, showcasing their potential applications in sustainable and biodegradable materials.

关键词： Foamability Imine bonds Poly(butylene succinate) Vitrimer

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The investigation of care burden and coping style in caregivers of spinal cord injury patients

引用

International Journal of Nursing Sciences 2014年第2期1卷 185-190页

作者： Hai-Ping Ma hui-juan lu Xiao-Yun Xiong Jian-Ying Yao Zhen Yang The Second Affiliated Hospital of Nanchang University NanchangChina School of Nursing Fudan UniversityShanghaiChina The First Affiliated Hospital of Nanchang University NanchangChina

Purpose:The level of care burden experienced by caregivers of patients with spinal cord injury and their coping style were evaluated in order to identify ways to improve their capacity to respond and reduce the care ***:A convenience sampling method was used to select 150 spinal cord injury patients who were discharged from the Second and the Third Affiliated Hospital of Nanchang University and their primary *** Chinese version of the Zarit Caregiver Burden Interview and the Simplified Coping Style Questionnaire were distributed to assess caregiver burden and coping ***:The care burden score of the caregivers of patients with spinal cord injury was 52.9111.56 ***-eight percent of caregivers reported moderate or severe care burden *** largest proportion of caregivers were female spouses,who were less likely to use an active coping strategy.A negative coping strategy was more frequently used by caregivers compared to healthy adults,and was positively correlated with burden of *** contrast,a negative correlation was found between the care burden and an active coping ***:Primary caregivers of spinal cord injury patients report a heavy burden of *** active coping strategies are more beneficial,medical care providers should encourage caregivers to make more use of these coping styles to promote physical and mental health for themselves,their patients and their family,as well as to improve the quality of care provided.

关键词： Caregivers Care burden Coping style Spinal cord injury

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Multifunctional carbon materials from rugose rose for energy storage and water purification

引用

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING 2024年第9期18卷 97-0页

作者： Li, Peng-hui Zhou, hui Wu, Wen-juan Nanjing Forestry Univ Jiangsu Coinnovat Ctr Efficient Proc & Utilizat Fo Nanjing 210037 Peoples R China Nanjing Forestry Univ Coll Light Ind & Food Engn Nanjing 210037 Peoples R China East China Univ Sci & Technol Coll Chem Engn Shanghai 200237 Peoples R China State Key Lab Chem Engn Shanghai 200237 Peoples R China

With the advancement of social process, the resource problem is becoming more prominent, biomass materials come into being, and it is becoming more and more important to explore and prepare efficient and multifunctional biomass materials to alleviate the problems of energy storage and water pollution. In this paper, nitrogen-doped hierarchical porous carbon materials (NRRC) were produced by one-step carbonization of withered rose as raw material and melamine as nitrogen source with KOH-activated porosification. The resulting nitrogen-doped porous carbon material had the most abundant pores and the best microspherical graded pore structure, with a specific surface area of up to 1393 m2g-1, a pore volume of 0.68 cm3g-1, and a nitrogen-doped content of 5.52%. Electrochemical tests showed that the maximum specific capacitance of NRRC in the three-electrode system was 346.4 Fg-1 (0.5 Ag-1), which was combined with favorable capacitance retention performance and cycling stability. The NRRC//NRRC symmetric supercapacitors were further assembled, and the maximum energy density of a single device was 23.88 Whkg-1, which still maintains excellent capacitance retention and cyclic charging/discharging stability. For example, the capacitance retention rate was always close to 96.27% with almost negligible capacitance loss after 10000 consecutive charge/discharge cycles (current density: 10 Ag-1). Regardless of the three-electrode or two-electrode system, the super capacitive performance of NRRC porous carbon materials was comparable to the electrochemical performance of many reported biomass porous carbon materials, which showed better energy storage advantages and practical application potential. In addition, NRRC porous carbon materials had excellent water purification ability. The dye adsorption test confirmed that NRRC had a high adsorption capacity (491.47 mgg-1) for methylene blue. This und

关键词： rose carbon adsorption electrode material electrochemical performance POROUS CARBON SUPERIOR PERFORMANCE ACTIVATED CARBON SURFACE-AREA SUPERCAPACITOR BIOMASS ADSORPTION ELECTRODE NITROGEN

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

From non-carbon host toward carbon-free lithium-sulfur batteries

引用

Nano Research 2024年第3期17卷 1337-1365页

作者： Yanqi Feng hui Liu Qiongqiong lu School of Materials Science and Engineering Shaanxi Key Laboratory of Green Preparation and Functionalization for Inorganic MaterialsShaanxi University of Science and TechnologyXi’an 710021China Institute of Materials Henan Key Laboratory of Advanced Conductor MaterialsHenan Academy of SciencesZhengzhou 450046China Leibniz Institute for Solid State and Materials Research(IFW)Dresden e.V. Helmholtzstraβe 2001069 DresdenGermany School of Materials&Environment Engineering Chengdu Technological UniversityChengdu 611730China

Lithium-sulfur(Li-S)batteries with advantages of high energy densities(2600 Wh·kg^(-1)/2800 Wh·L^(-1))and sulfur abundance are regarded as promising candidates for next-generation high-energy ***,the conventional carbon host used in sulfur cathodes suffers from poor chemical adsorption towards Li-polysulfides(LPS)in liquid electrolyte and sluggish redox kinetics,leading to low capacity and rate ***,carbon host used in Li metal anode with the intrinsic property of poor lithiophilicity and high Li-nucleation barrier gives rise to uncontrollable dendrite growth and further battery ***,non-carbon hosts with chemical adsorption toward LPS and catalytic activity for accelerating LPS redox conversion as well as lithiophilic property for guiding uniform Li deposition are proposed and demonstrated a high efficiency in both sulfur cathodes and Li metal *** this review,the principle and challenges of Li-S batteries are first presented,then recent work using non-carbon hosts in Li-S batteries is summarized comprehensively,and the mechanism of non-carbon host in improving sulfur utilization and stabilizing Li metal anode is discussed in ***,remaining challenges and outlook on the implementation of non-carbon host for practical carbon-free Li-S batteries are also provided.

关键词： sulfur cathode Li metal anode polysulfides adsorption catalytic effect Li dendrite carbon-free lithium-sulfur batteries

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Surface iodine and pyrenyl-graphdiyne co-modified Bi catalysts for highly efficient CO_(2) electroreduction in acidic electrolyte

引用

Nano Research 2024年第4期17卷 2381-2387页

作者： Min Zhang juan Wang Xin Rong Xiu-Li lu Tong-Bu lu MOE International Joint Laboratory of Materials Microstructure Institute for New Energy Materials and Low Carbon TechnologiesSchool of Materials Science and EngineeringTianjin University of TechnologyTianjin 300384China

CO_(2) electroreduction to formic acid/formate would contribute to alleviating the energy and climate *** work reports a Bi-based catalyst derived from the in-situ electroreduction of Bi_(2)O_(2)CO_(3) modified with iodine and pyrenyl-graphdiyne(PGDY)on the surface for efficient electroreduction of CO_(2) in acidic electrolyte,with a high partial current density of 98.71 mA·cm^(-2) and high Faradaic efficiency(FE)>90%over the potential range from^(-1).2 to-1.5 V *** hydrogen electrode(RHE),as well as the long-term operational stability over 240 h without degradation in H-type *** results and density function theory calculations show that the synergistic effect of surface iodine and PGDY is responsible for this active and extremely stable process of CO_(2) electroreduction via lowering the energy barriers for formation of*OCHO intermediate,suppressing the competitive HER by enhancing the concentration of both K+and CO_(2) at reaction interface,as well as preventing the dissolution and re-deposition of active Bi atoms on surface during catalytic *** work provides new insight into designing highly active and stable electrocatalysts for CO_(2) reduction.

关键词： CO_(2) reduction electrocatalysis Bi-based catalysts acidic electrolyte

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enlarged interlayer of separator coating enabling high-performance lithiumsulfur batteries

引用

Frontiers of Chemical Science and Engineering 2024年第2期18卷 103-112页

作者： Yanqi Feng hui Liu Xiaoting Liu Qiongqiong lu School of Materials&Environment Engineering Chengdu Technological UniversityChengdu 611730China School of Materials Science and Engineering Shaanxi Key Laboratory of Green Preparation and Functionalization for Inorganic MaterialsShaanxi University of Science and TechnologyXi’an 710021China Green Catalysis Center and College of ChemistryZhengzhou UniversityZhengzhou 450001China Institute of Materials Henan Key Laboratory of Advanced Conductor MaterialsHenan Academy of SciencesZhengzhou 450046China Leibniz Institute for Solid State and Materials Research(IFW) Dresden e.V.Dresden 01069Germany

Lithiumsulfur batteries have been intensively studied due to their high theoretical energy density and abundant sulfur resources. However, their commercial application is hindered by the low redox kinetics and high sulfur losses. In principle, in the design of cathodes and separators, the adsorption toward lithium-polysulfides should be enhanced and the conversion of soluble high-order lithium-polysulfides should be catalyzed. Herein, a KV_(3)O_(8)·0.75H_(2)O separator is designed as an effective lithium-polysulfides mediator in lithiumsulfur batteries. The intercalated K+ would enlarge the interlayer spacing of vanadium oxides, preventing the collapse of the layer structure and improving the electrical/ion conductivity of the interface. Moreover, the KV_(3)O_(8)·0.75H_(2)O modified separator possess a prior adsorption and high redox kinetics toward lithium-polysulfides due to the enhanced diffusion kinetics, which guarantees the high-rate capability and efficient utilization of sulfur. As a result, lithiumsulfur batteries exhibit a high capacity of 1362 mAh·g^(-1) and a long lifespan with a low capacity loss of 0.073% per cycle. This work may provide an alternative way to establish a functional separator to balance the adsorption and conversion of polysulfides during the redox back and forth.

关键词： lithium kinetics adsorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Predictive value of intracranial high-density areas in neurological function

引用

World Journal of Psychiatry 2024年第7期14卷 1080-1086页

作者： Zhi-juan lu Jin-Xing Lai Jing-Ru Huang Shu-Hua Xie Zhao-hui Lai Department of Neurology Ganzhou People’s HospitalGanzhou 341000Jiangxi ProvinceChina

BACKGROUND Intracranial high-density areas(HDAs)have attracted considerable attention for predicting clinical outcomes;however,whether HDAs predict worse neurological function and mental health remains controversial and unclear,which requires further *** this prospective study,96 patients with acute ischemic stroke(AIS)who accepted endovascular mechanical thrombectomy(EMT)were *** enrolled patients underwent cranial computed tomography(CT)examination within 24 hours after *** data in terms of National Institutes of Health Stroke Scale(NIHSS),the 3-month modified Rankin Scale(mRS),self-rating depression scale(SDS),and self-rating anxiety scale(SAS)scores were collected and compared between patients with HDAs and non-HDAs and between patients with good and poor clinical *** to patients without HDAs,patients with HDAs presented severe neurological deficits(admission NIHSS score:18±3 vs 19±4),were more likely to have post-stroke disabilities(mRSlusion,HDAs on CT images predicted poor prognosis and severe depressive and anxiety symptoms in patients with AIS who underwent EMT.

关键词： Acute ischemic stroke Endovascular mechanical thrombectomy High-density areas Depressive disorder Anxiety disorder

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Surface chemical microenvironment engineering of catalysts by organic molecules for boosting electrocatalytic reaction

引用

Chinese Chemical Letters 2024年第8期35卷 15-24页

作者： Xianxu Chu lu Wang Junru Li hui Xu Henan Key Laboratory of Biomolecular Recognition and Sensing College of Chemistry and Chemical EngineeringShangqiu Normal UniversityShangqiu 476000China Key Laboratory of Advanced Catalytic Materials and Technology Advanced Catalysis and Green Manufacturing Collaborative Innovation CenterChangzhou UniversityChangzhou 213164China

Electrocatalysis is a surface-sensitive process,in which the catalytic activity of electrocatalyst highly re-lates to the surface adsorption/desorption behaviors of the reactants/intermediates/products on the cat-alytically active *** chemical microenvironment engineering via organic molecules functional-ization is a promising strategy to tune the electrocatalytic activity since it can well modify the elec-trode/electrolyte interface and alter the reaction *** this review,we summarize the recent progress of surface microenvironment engineering of electrocatalysts induced by organic molecules func-tionalization,with the special focus on the organic molecule-assisted growth mechanism and unique electronic *** importantly,the applications of organic molecule functionalized catalysts in var-ious electrocatalytic reactions are also systematically summarized,along with a deep discussion on the conclusion and *** work will open a new avenue for the construction and modification of advanced electrocatalysts based on organic molecule-mediated interface engineering.

关键词： Chemical microenvironment engineering Organic molecules Electrocatalysis Functionalization Interface

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Density Clustering Algorithm Based on KD-Tree and Voting Rules

引用

Computers, Materials & Continua 2024年第5期79卷 3239-3259页

作者： hui Du Zhiyuan Hu Depeng lu Jingrui Liu The College of Computer Science and Engineering Northwest Normal UniversityLanzhou730070China

Traditional clustering algorithms often struggle to produce satisfactory results when dealing with datasets withuneven density. Additionally, they incur substantial computational costs when applied to high-dimensional datadue to calculating similarity matrices. To alleviate these issues, we employ the KD-Tree to partition the dataset andcompute the K-nearest neighbors (KNN) density for each point, thereby avoiding the computation of similaritymatrices. Moreover, we apply the rules of voting elections, treating each data point as a voter and casting a votefor the point with the highest density among its KNN. By utilizing the vote counts of each point, we develop thestrategy for classifying noise points and potential cluster centers, allowing the algorithm to identify clusters withuneven density and complex shapes. Additionally, we define the concept of “adhesive points” between two clustersto merge adjacent clusters that have similar densities. This process helps us identify the optimal number of clustersautomatically. Experimental results indicate that our algorithm not only improves the efficiency of clustering butalso increases its accuracy.

关键词： Density peaks clustering KD-Tree K-nearest neighbors voting rules

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Simultaneous removal of 1,2-dichlorobenzene and furan over Mn-Ce-Fe oxide catalyst:Catalytic activity and product analysis

引用

Journal of Rare Earths 2024年第5期42卷 972-979,I0006页

作者： juan Qiu Minghui Tang Yaqi Peng Xuanhao Guo Shengyong lu Jianhua Yan Taizhou Institute of Zhejiang University Taizhou 318000China State Key Laboratory for Clean Energy Utilization Institute for Thermal Power EngineeringZhejiang UniversityHangzhou 310027China

The Mn-Ce-Fe mixed oxide(MCFe)was prepared by co-precipitation and the catalytic performance was tested by using 1,2-dichlorobenzene(1,2-DCB)and furan as model molecules of PCDD/*** effect of O_(2)concentration,SO_(2) and NO on the catalytic activity was *** 270℃,the MCFe oxide catalyst presents significant simultaneous removal efficiency of 75.25%and 100%for 1,2-DCB and furan,***-Emmett-Teller(BET)method(BET),X-ray diffraction(XRD),scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FTIR),H_2-temperature programmed reduction(H_(2)-TPR),NH_(3)-temperature programmed desorption(NH_3-TPD)and O_(2)-TPD were used to characterize the catalysts before and after the *** tests suggest that the oxidation behavior of furan occurred prior to that of 1,*** to the intermediate products detected by gas chromatography-mass spectrometry(GC-MS),the by-products include chlorinated hydrocarbons,long-chain hydrocarbons,ketone,*** catalytic oxidation reaction paths are proposed.

关键词： 1 2-dichlorobenzene Furan Catalytic oxidation Product analysis Rare earths

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：