检索结果-南通市图书馆

Journal of Renewable Materials 2024年第2期12卷 259-274页

作者： Lianyuan Ji Mingchen Shi Zengkai Feng hui yang College of Materials Science and Engineering Nanjing Tech UniversityNanjing211816China Department of Design Huadingju Engineering Co.Ltd.Tianjin300041China

Cobalt sulphides attract much attention as anode materials for Li-ion batteries(LIBs).However,its poor conductivity,low initial column efficiency and large volume changes during cycling have hindered its further ***,novel interlaced CoS nanosheets were firstly prepared on Carbon Fiber Cloth(CFC)by two hydrothermal reactions followed with carbon coating via carbonizing dopamine(CoS NS@C/CFC).As a freestanding anode,the nanosheet structure of CoS not only accommodates the volume variation,but also provides a large interface area to proceed the charge transfer *** addition,CFC works as both a three-dimensional skeleton and an active substance which can further improve the areal capacity of the resulting ***,the coated carbon combined with the CFC work as a 3D conductive network to facilitate the electron *** obtained CoS NS@C/CFC,and the contrast sample prepared with the same procedure but without carbon coating(CoS NS/CFC),are characterized with XRD,SEM,TEM,XPS and electrochemical *** results show that the CoS NS@C/CFC possesses much improved electrochemical performance due to the synergistic effect of nanosheet CoS,the coated carbon and the CFC substrate,exhibiting high initial columbic efficiency(~87%),high areal capacity(2.5 at 0.15 mA cm−2),excellent rate performance(1.6 at 2.73 mA cm−2)and improved cycle stability(87.5%capacity retention after 300 cycles).This work may provide a new route to explore freestanding anodes with high areal specific capacity for LIBs.

关键词： Lithium-ion battery cobalt sulfide carbon coating carbon fiber cloth freestanding anode

Design and preparation of a crosslinkable,oil-resistant,and bio-based elastomer from fumarate

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第2期67卷 622-631页

作者： hui yang Haijun Ji Xinxin Zhou Shihan yang Liwei Li Chaoying Sun Weiwei Lei Runguo Wang Liqun Zhang Beijing State Key Laboratory of Organic-Inorganic Composites&Beijing Laboratory of Biomedical Materials Beijing University of Chemical TechnologyBeijing100029China Hubei Key Laboratory of Polymer Materials Faculty of Materials Science and EngineeringHubei UniversityWuhan430062China

Poly(diethyl fumarate-co-methoxyethyl acrylate-co-vinyl chloroacetate)(PDEFMV),a novel bio-based elastomer with a saturated structure,was synthesized via redox emulsion *** glass-transition temperatures of PDEFMV,adjusted through the variation of the diethyl fumarate-to-methoxyethyl acrylate feeding ratio,ranged from-36.1 to-14.8 ℃.The number-average molecular weights of PDEFMV ranged from 384,000 to 46,000 g/*** designing the molecular structure,vinyl chloroacetate was used to provide active sites for subsequent vulcanization and *** active chlorine groups within the PDEFMV chain reacted with the crosslinking agent trithiocyanuric acid under high temperature and pressure to form a nonsulfur crosslinked three-dimensional network *** achieve the desired properties,carbon black(CB,N330) was incorporated to reinforce PDEFMV,leading to the formation of PDEFMV/CB composites.A comprehensive study was conducted on the high-temperature oil resistance of PDEFMV/CB *** immersion in IRM903 oil at temperatures of 150 and 200 ℃ for 72 h,the mass and volume changes in PDEFMV/CB were lower than those observed in commercially available acrylate rubber(AR)/CB,indicating that PDEFMV exhibited superior oil ***,the aging characteristics and mechanisms of oil resistance in the PDEFMV/CB and AR/CB composites were investigated at different temperatures(150,200,and 250 ℃).The results provide insights into the operational temperature ranges suitable for PDEFMV/CB and offer valuable guidance for potential industrial applications.

关键词： diethyl fumarate molecular design bio-based elastomer solvent-free synthetic route high-temperature oil resistance

Two-photon polymerization-based 4D printing and its applications

在线全文

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第1期6卷 1-25页

作者： Bingcong Jian Honggeng Li Xiangnan He Rong Wang hui Ying yang Qi Ge Shenzhen Key Laboratory of Soft Mechanics&Smart Manufacturing Southern University of Science and TechnologyShenzhen 518055People’s Republic of China Department of Mechanical and Energy Engineering Southern University of Science and TechnologyShenzhen 518055People’s Republic of China Pillar of Engineering Product Development Singapore University of Technology and Design8 Somapah RoadSingapore 487372Singapore

Two-photon polymerization(TPP)is a cutting-edge micro/nanoscale three-dimensional(3D)printing technology based on the principle of two-photon *** surpasses the diffraction limit in achieving feature sizes and excels in fabricating intricate 3D micro/nanostructures with exceptional *** concept of 4D entails the fabrication of structures utilizing smart materials capable of undergoing shape,property,or functional changes in response to external stimuli over *** integration of TPP and 4D printing introduces the possibility of producing responsive structures with micro/nanoscale accuracy,thereby enhancing the capabilities and potential applications of both *** paper comprehensively reviews TPP-based 4D printing technology and its diverse ***,the working principles of TPP and its recent advancements are ***,the optional4D printing materials suitable for fabrication with TPP are ***,this review paper highlights several noteworthy applications of TPP-based 4D printing,including domains such as biomedical microrobots,bioinspired microactuators,autonomous mobile microrobots,transformable devices and robots,as well as anti-counterfeiting *** conclusion,this paper provides valuable insights into the current status and future prospects of TPP-based4D printing technology,thereby serving as a guide for researchers and practitioners.

关键词： two-photonpolymerization 4D printing nano/micro fabrication microrobot

Highly efficient labelling of extracellular vesicles for enhanced detection on a microfluidic platform

在线全文

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第2期35卷 441-445页

作者： Shi Hu Rui Hao Zitong Yu huitao Zhang hui yang Bionic Sensing and Intelligence Center Institute of Biomedical and Health EngineeringShenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China

Developing precise extracellular vesicles(EVs)labelling techniques with minimal disturbance is of great importance to the follow-up EVs detection and ***,currently available methods such as using probes to conjugate phospholipids or membrane proteins have certain limitations due to EV steric hindrance,dye aggregation,***,we present a microfluidic platform to enhance EVs’labelling efficiency and improve their *** platform provides excellent sample throughput and high-efficiency EV labelling at lower label concentrations with an optimized flowing *** cytometry analysis(FCM)and cellular uptake results show that EV labelling by utilizing this platform possesses the merits of a higher labelling efficiency with 64.1%relative improvement than conventional co-incubation method and a lower background ***,this technique maintains EVs’size,morphology and biological *** the recipient cells uptake the EVs treated by the microfluidic platform,the spatial and temporal distribution of EVs in the cells are clearly *** results demonstrate that our method holds great potential in efficient labelling of EVs,which is essential to subsequent EV quantification and analysis.

关键词： Microfluidic platform Extracellular vesicles Labelling PKH dye Flow cytometry

Hierarchical V_(3)S_(4)/C nanofibers with fast kinetics for superior alkali metal batteries

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1836-1844页

作者： Li Chen Zhi-Xin Rao Zhi Chen Zhao-hui Wu Shuai yang Zhi-Jun Feng hui-Yong yang Fan-Yan Zeng Xi-Bao Li Jin-yang Hu Jun-Tong Huang School of Materials Science and Engineering Nanchang Hangkong UniversityNanchang330063China School of Aeronautical Manufacturing Engineering Nanchang Hangkong UniversityNanchang330063China

Owing to the numerous benefits,including low cost and great theoretical capacity,V3S4 has been a research hotspot for Li^(+)/Na^(+)/K^(+) ***,the V_(3)S_(4) electrode with long cycling stability and high specific capacities continues to pose significant *** this work,vacuum vulcanization is combined with electrospinning to synthesize V_(3)S_(4)/C composite nanofibers(V_(3)S_(4)@CNF).

关键词： composite fibers kinetics

Harnessing innate immune pathways for therapeutic advancement in cancer

在线全文

学校读者我要写书评

暂无评论

Signal Transduction and Targeted Therapy 2024年第4期9卷 1506-1564页

作者： Ankang Hu Li Sun Hao Lin Yuheng Liao hui yang Ying Mao Department of Neurosurgery Huashan HospitalFudan UniversityShanghaiP.R.China Institute for Translational Brain Research Shanghai Medical CollegeFudan University ShanghaiPR.China National Center for Neurological Disorders Huashan HospitalShanghai Medical CollegeFudan UniversityShanghaiP.R.China Shanghai Key Laboratory of Brain Function Restoration and Neural Regeneration Shanghai Clinical Medical Center of NeurosurgeryNeurosurgical Institute of Fudan UniversityHuashan HospitalShanghai Medical CollegeFudan UniversityShanghaiP.R.China State Key Laboratory of Medical Neurobiology and MOE Frontiers Center for Brain Science and MOE Frontiers Center for Brain Science Institutes of Brain ScienceShanghai Medical CollegeFudan UniversityShanghaiP.R.China Shanghai Key Laboratory of Medical Epigenetics International Co-laboratory of Medical Epigenetics and Metabolism(Ministry of Science and Technology)and Key Laboratory of Metabolism and Molecular Medicine(Ministry of Education)and Molecular and Cell Biology LabInstitutes of Biomedical SciencesShanghai Medical College of Fudan UniversityShanghaiP.R.China

The innate immune pathway is receiving increasing attention in cancer *** pathway is ubiquitous across various cell types,not only in innate immune cells but also in adaptive immune cells,tumor cells,and stromal *** targeting the innate immune pathway have shown profound changes in the tumor microenvironment(TME)and improved tumor prognosis in preclinical ***,to date,the clinical success of drugs targeting the innate immune pathway remains ***,recent studies have shown that activation of the innate immune pathway can paradoxically promote tumor *** uncertainty surrounding the therapeutic effectiveness of targeted drugs for the innate immune pathway is a critical issue that needs immediate *** this review,we observe that the role of the innate immune pathway demonstrates heterogeneity,linked to the tumor development stage,pathway status,and specific cell *** propose that within the TME,the innate immune pathway exhibits multidimensional *** diversity is fundamentally rooted in cellular heterogeneity and is manifested as a variety of signaling *** pro-tumor effect of innate immune pathway activation essentially reflects the suppression of classical pathways and the activation of potential pro-tumor alternative *** our understanding of the tumor's innate immune pathway network and employing appropriate targeting strategies can enhance our ability to harness the anti-tumor potential of the innate immune pathway and ultimately bridge the gap from preclinical to clinicalapplication.

关键词： drugs therapeutic innate

Thermochemical splitting of CO_(2) on perovskites for CO production: A review

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第3期90卷 464-485,I0011页

作者： Biduan Chen Harriet Kildahl hui yang Yulong Ding Lige Tong Li Wang School of Energy and Environmental Engineering University of Science and Technology BeijingBeijing 100083China School of Chemical Engineering University of BirminghamBirmingham B152TTUnited Kingdom Beijing Engineering Research Centre of Energy Saving and Environmental Protection Beijing 100083China

Energy supply dominated by fossil energy has been and remains the main cause of carbon dioxide emissions,the major greenhouse gas leading to the current grave climate change *** technical pathways have been proposed to address the *** capture and utilization(CCU) represents one of the approaches and thermochemical CO_(2) splitting driven by thermal energy is a subset of the CCU,which converts the captured CO_(2) into CO and makes it possible to achieve closed-loop carbon ***-active catalysts are among the most critical components of the thermochemical splitting cycles and perovskites are regarded as the most promising *** we review the latest advancements in thermochemical cycles based on perovskites,covering thermodynamic principles,material modifications,reaction kinetics,oxygen pressure control,circular strategies,and demonstrations to provide a comprehensive overview of the topical *** cycles based on such materials require the consideration of trade-off between cost and efficiency,which is related to actual material used,operation mode,oxygen removal,and heat *** of efforts have been made towards improving reaction rates,conversion efficiency and cycling stability,materials related research has been lacking-a key aspect affecting the performance across all above *** perovskites and composite perovskites arise recently as a potentially promising addition to material *** such materials,more effective oxygen removal would be needed to enhance the overall efficiency,for which thermochemical or electrochemical oxygen pumps could contribute to efficient oxygen removal as well as serve as means for inert gas *** integration of thermochemical CO_(2) splitting process with downstream fuel production and other processes could reduce costs and increase efficiency of the *** represents one of the directions for the future research.

关键词： Perovskite Thermochemical cycles CO_(2) splitting Fuel production Non-stoichiometric

Thermal stability of the Cr-coated zirconium alloy microstructure prepared by pulsed laser deposition

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第2期6卷 333-341页

作者： Bo Li hui-Long yang Reuben Holmes Li-Juan Cui Sho Kano Hiroaki Abe Department of Nuclear Engineering and Management The University of TokyoTokyo 113-8656Japan School of Nuclear Science and Engineering Shanghai Jiao Tong UniversityShanghai 200240China Nuclear Professional School The University of TokyoIbaraki 319-1188Japan

Cr-coated zirconium alloy was prepared by pulsed laser deposition(PLD)for the application of accident-tolerant fuel cladding in light water *** microstructural characteristics of the Cr coating and its evolution with temperature were investigated using grazing incidence X-ray diff raction and in situ heating transmission electron microscopy(TEM).Results show that the microstructure of the laser-deposited Cr coatings consists mainly of fine and non-specific shaped nano-crystals in the inner layer and columnar crystals in the outer *** recrystallization of the Cr-coating layer starts at 300–400℃ to release the high strain introduced by PLD,and the grain coalescence starts at temperatures>400°*** annealing,the(110)-texture gradually intensifi es because of its high reticular density and low close-packed ***,in situ heating TEM observation shows the presence of cavities on the Cr–Zr interface,which may result from the interdiff usion and/or the transformation from amorphous to crystalline.

关键词： Accident tolerant fuel Crcoating Interface Microstructure Pulsed laser deposition

COF-based membranes for liquid phase separation:Preparation,mechanism and perspective

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第7期141卷 63-89页

作者： Yujie Zhao He Gu Yilun Zhou CaimeiWen Xiaolu Liu Suhua Wang Zhongshan Chen hui yang Xiangke Wang College of Environmental Science and Engineering North China Electric Power UniversityBeijing 102206China School of Environmental Science and Engineering Guangdong University of Petrochemical TechnologyMaoming 525000China

Covalent organic frameworks(COFs)are a new kind of crystalline porous materials composed of organic molecules connected by covalent bonds,processes the characteristics of low density,large specific surface area,adjustable pore size and structure,and easy to functionalize,which have been widely used in the field of membrane separation ***,there are more and more researches focusing on the preparation methods,separation application,and mechanism of COF membranes,which need to be further summarized and *** this review,we primarily summarized several conventional preparation methods,such as two-phase interfacial polymerization,in-situ growth on substrate,unidirectional diffusion method,layer-by-layer assembly method,mixed matrix membranes,and so *** advantages and disadvantages of each method are briefly *** application potential of COF membrane in liquid separation are introduced from four aspects:dyeing wastewater treatment,heavy metal removal,seawater desalination and oil-water ***,the mechanisms including pore structure,hydrophilic/hydrophobic,electrostatic repulsion/attraction and Donnan effect are *** the efficient removal of different kind of pollutions,researchers can select different ligands to construct membranes with specific pore size,hydrophily,salt or organic rejection ability and functional *** ideas for the design and preparation of COF membranes are ***,the future direction and challenges of the next generation of COF membranes in the field of separation are prospected.

关键词： Covalent organic frameworks Membrane materials Liquid phase separation Separation mechanism

Significantly Enhanced Energy Storage Performances of PEI-based Composites Utilizing Surface Functionalized ZrO_(2) Nanoparticles for High-Temperature Application

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第3期42卷 322-332,I0006页

作者： Qing-Qing Liu Qiu-Hao Lin Xiao-Dong Qi Nan Zhang Ting Huang Jing-hui yang Yong Wang School of Chemistry Southwest Jiaotong UniversityChengdu 610031China Key Laboratory of Advanced Technologies of Materials Ministry of Education of ChinaSouthwest Jiaotong UniversityChengdu 610031China

Polymer dielectrics with a high energy density and an available energy storage capacity have been playing an important role in advanced electronics and power systems. Nevertheless, the use of polymer dielectrics in harsh environments is limited by their low energy density at high temperatures. Herein, zirconium dioxide(ZrO_(2)) nanoparticles were decorated with amino group utilizing 4,4-methylenebis(phenyl isocyanate)(AMEO) and successfully incorporated into polyetherimide(PEI) matrix. The dielectric properties, breakdown strength, and energy storage performances of PEI/ZrO_(2)-AMEO nanocomposites were investigated from 25 ℃ to 150 ℃. It is found that the combination of moderate bandgap ZrO_(2) with modest dielectric constant and polar groups at interface with deep trap can offer an available strategy to simultaneously increase the dielectric constant and breakdown strength of polymer dielectrics. As a result, the composites containing ZrO_(2)-AMEO exhibit excellent energy storage performance at elevated temperatures. Specially, the PEI-based composites with 3 vol% ZrO_(2)-AMEO display a maximum discharged energy density(U_(d)) of 3.1 J/cm^(3) at 150 ℃, presenting 90% higher than that of neat PEI. This study may help to better develop the polymer-based dielectric composite applied at elevated temperatures.

关键词： Polyetherimide High temperature dielectric ZrO_(2) Interface