检索结果-南通市图书馆

Numerical simulation of melt flow and temperature field during DC casting 2024 aluminium alloy under different casting conditions

引用

China Foundry 2024年第4期21卷 387-396页

作者： Jin-chuan Wang Yu-bo Zuo Qing-feng Zhu Jing Li Rui Wang Xu-dong liu Key Laboratory of Electromagnetic Processing of Materials Ministry of EducationNortheastern UniversityShenyang 110819China School of Materials Science and Engineering Northeastern UniversityShenyang 110819China Engineering Research Center of Advanced Materials Preparing Technology Ministry of EducationShenyang 110819China CAS Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China

Casting speed,casting temperature and secondary cooling water flow rate are the main process parameters affecting the DC casting *** parameters significantly influence the flow and temperature fields during casting,which are crucial for the quality of the ingot and can determine the success or failure of the casting *** simulation,with the advantages of low cost,rapid execution,and visualized results,is an important method to study and optimize the DC casting *** the present work,a simulation model of DC casting 2024 aluminum alloy was established,and the reliability of the model was ***,the influence of casting parameters on flow field and temperature field was studied in detail by numerical simulation *** show that with the increase of casting speed,the melt flow becomes faster,the depths of slurry zone and mushy zone increase,and the variation of slurry zone depth is greater than that of mushy *** an increase in casting temperature,the melt flow rate increases,the depth of the slurry zone becomes shallower,and the depth of the mushy zone experiences only minor *** simulation results further indicate that the increase of the flow rate of the secondary cooling water slightly reduces the depths of both slurry and mushy zone.

关键词： aluminium DC casting flow field temperature field numerical simulation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental study on wax deposition of highly paraffinic oil in intermittent gas-oil flow in pipelines

引用

Petroleum Science 2024年第3期21卷 2080-2088页

作者： chuan-Shuo Wang Qian-Li Ma Xiao-Fang Lv Jie Zhang Yang liu Shi-Dong Zhou Jiangsu Key Laboratory of Oil and Gas Storage and Transportation Technology Changzhou UniversityChangzhou213164JiangsuPR China Hade Oil and Gas Development Department Tarim Oilfield BranchKorla841000XinjiangPR China

Oil-gas two phase wax deposition is a fairly common and open-ended question in flow assurance of multiphase transportation *** paper investigated the two main aspects of oil-gas two phase wax deposition layer:apparent thickness and crystal structure characteristics.A typical highly paraffinic oil in Bohai Sea,China,was used as the experimental material to investigate the wax deposition thickness in oil-gas two phase under the influence of different oil temperatures,superficial gas/liquid phase velocities and gas-oil ratios by using multiphase flow loop experimental *** as in the classical theory of wax molecular diffusion,it showed that wax deposition thickness of oil-gas two phase increased with increasing oil *** of the impact of different superficial phase velocities found that the actual liquid flow heat transfer and shear stripping was the gas phase dominant mechanisms determining wax deposit *** addition,the crystal structure of the wax deposition layer was characterized with the help of small-angle X-ray scattering(SAXS)for different circumferential positions,flow rates and gas-oil *** bottom deposition layer had a complex crystal structure and high hardness,which were subject to change over flow rate ***,the SAXS results provided evidence that the indirect effect of the actual liquid velocity modified by the gas phase was the main *** study of the effect of gas phase on the wax deposition of oil-gas two phase will help shed light onto the mechanism by which this important process *** findings address a very urgent need in the field of wax deposition of highly paraffinic oil to understand the flow security of oilgas two phase that occurs easily in multiphase field pipelines.

关键词： Oil-gas two phase Highly paraffinic oil Wax deposition SAXS

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Novel intelligent reasoning system for tool wear prediction and parameter optimization in intelligent milling

引用

Advances in Manufacturing 2024年第1期12卷 76-93页

作者： Long-Hua Xu chuan-Zhen Huang Zhen Wang Han-Lian liu Shui-Quan Huang Jun Wang School of Mechanical Engineering Yanshan UniversityQinhuangdao066004HebeiPeople’s Republic of China Center for Advanced Jet Engineering Technologies(CaJET) Key Laboratory of High-efficiency and Clean Mechanical Manufacture(Ministry of Education)National Experimental Teaching Demonstration Center for Mechanical Engineering(Shandong University)School of Mechanical EngineeringShandong UniversityJinan250061People’s Republic of China Institute of Manufacturing Technology Guangdong University of TechnologyGuangzhou510006People’s Republic of China

Accurate intelligent reasoning systems are vital for intelligent *** this study,a new intelligent reasoning system was developed for milling processes to accurately predict tool wear and dynamically optimize machining *** developed system consists of a self-learning algorithm with an improved particle swarm optimization(IPSO)learning algorithm,prediction model determined by an improved case-based reasoning(ICBR)method,and optimization model containing an improved adaptive neural fuzzy inference system(IANFIS)and *** results showed that the IPSO algorithm exhibited the best global convergence *** ICBR method was observed to have a better performance in predicting tool wear than standard CBR *** IANFIS model,in combination with IPSO,enabled the optimization of multiple objectives,thus generating optimal milling *** paper offers a practical approach to developing accurate intelligent reasoning systems for sustainable and intelligent manufacturing.

关键词： Improved particle swarm optimization(IPSO)algorithm Improved case-based reasoning(ICBR)method Adaptive neural fuzzy inference system(ANFIS)model Tool wear prediction Intelligent manufacturing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research on the quasi-isentropic driving model of aluminized explosives in the detonation wave propagation direction

引用

Defence Technology（防务技术） 2024年第2期32卷 596-618页

作者： Hongfu Wang Yan liu Fan Bai Chao He Yingliang Xu Qiang Zhou chuan Xiao Fenglei Huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081China China Research and Development Academy of Machinery Equipment Beijing100089China Beijing Institute of Technology Chongqing Innovation Center Chongqing401120China

Taking CL-20(Hexanitrohexaazaisowurtzitane)-based aluminized explosives with high gurney energy as the research object, this research experimentally investigates the work capability of different aluminized explosive formulations when driving metal flyer plates in the denotation wave propagation *** research results showed that the formulations with 43 μm aluminum(Al) powder particles(The particle sizes of Al powder were in the range of 2~43 μm) exhibited the optimal performance in driving flyer plates along the denotation wave propagation direction. Compared to the formulations with Al powder 13 μm, the formulations with Al powder 2 μm delivered better performance in accelerating metal flyer plates in the early stage, which, however, turned to be poor in the later stage. The CL-20-based explosives containing 25% Al far under-performed those containing 15% Al. Based on the proposed quasi-isentropic hypothesis, relevant isentropy theories, and the functional relationship between detonation parameters and entropy as well as Al reaction degree, the characteristic lines of aluminized explosives in accelerating flyer plates were theoretically studied, a quasi-isentropic theoretical model for the aluminized explosive driving the flyer plate was built and the calculation methods for the variations of flyer plate velocity, Al reaction degree, and detonation product parameters with time and axial positions were developed. The theoretical model built is verified by the experimental results of the CL-20-based aluminized explosive driving flyer plate. It was found that the model built could accurately calculate the variations of flyer plate velocity and Al reaction degree over time. In addition, how physical parameters including detonation product pressure and temperature varied with time and axial positions was identified. The action time of the positive pressure after the detonation of aluminized explosives was found prolonged and the downtrend of the temperature was

关键词： Aluminized explosive Flyer plate experiment Quasi-isentropic theoretical model Al reaction Driving characteristics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Microstructure Recrystallization and Mechanical Properties of a Cold-Rolled TiNbZrTaHf Refractory High-Entropy Alloy

引用

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 633-647页

作者： chuan Rong Jieren Yang Xiaoliang Zhao Ke Huang Ying liu Xiaohong Wang Dongdong Zhu Ruirun Chen College of Materials Science and Engineering Sichuan UniversityChengdu610065China Key Laboratory of Air-Driven Equipment Technology of Zhejiang Province Quzhou UniversityQuzhou324000China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin150001China

The equiatomic TiNbZrTaHf alloy was successfully rolled at room temperature with the reduction of ~ 85%. The microstructure and tensile properties were investigated after cold working and annealing. It was determined that the recrystallization temperature of the TiNbZrTaHf alloy between 850 and 900 ℃. Complete recrystallization and normal grain growth occurred, the high stability of single phase was maintained after annealing at 1000, 1200, and 1400 ℃. But the precipitated phase appeared after long term annealing, as seen after 500 h at 1000 ℃. After cold working, the tensile strength and the elongation of TiNbZrTaHf were 1137 MPa and 25.1%, respectively. The annealed alloy has a high tensile strength (σ_(b )= 863 MPa) and ductility (ε_(e )= 28.5%). Moreover, the oxidation of TiNbZrTaHf alloy at elevated temperatures has a significant impact on its mechanical properties. The poor oxidation resistance of TiNbZrTaHf can accelerate tensile failure by inducing fractures at grain boundaries.

关键词： Refractory high entropy alloy Cold rolling Recrystallization Oxidation resistance Mechanical properties

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research on casing deformation prevention technology based on cementing slurry system optimization

引用

Petroleum Science 2024年第2期21卷 1231-1240页

作者： Yan Yan Meng Cai Wen-Hai Ma Xiao-chuan Zhang Li-Hong Han Yong-Hong liu State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials CNPC Tubular Goods Research InstituteXi©an710077ShaanxiChina College of Mechanical and Electrical Engineering China University of Petroleum(East China)Qingdao266580ShandongChina Shale Gas Evaluation and Exploitation Key Laboratory of Sichuan Province Chengdu610095SichuanChina CNPC Daqing Oilfield Company Daqing163453HeilongjiangChina

The casing deformation prevention technology based on the optimization of cement slurry is proposed to reduce the casing deformation of shale oil and gas wells during hydraulic fracturing. In this paper, the fracture mechanism of hollow particles in cement sheath was firstly analyzed by discrete element method, and the effect of hollow particles in cement on casing deformation was investigated by laboratory experiment method. Finally, field test was carried out to verify the improvement effect of the casing deformation based on cement slurry modification. The results show that the formation displacement can be absorbed effectively by hollow particles inside the cement transferring the excessive deformation away from casing. The particles in the uncemented state provide deformation space during formation slipping. The casing with diameter of 139.7 mm could be passed through by bridge plug with the diameter of 99 mm when the mass ratio of particle/cement reaches 1:4. According to the field test feedback, the method based on optimization of cement slurry can effectively reduce the risk of casing deformation, and the recommended range of hollow microbeads content in the cement slurry is between 15% and 25%.

关键词： Cement slurry Hollow ceramsite Casing deformation Formation slip Field test

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Dietary pyruvate targets cytosolic phospholipase A2 to mitigate inflammation and obesity in mice

引用

Protein & Cell 2024年第9期15卷 661-685页

作者： Sadaf Hasan Nabil Ghani Xiangli Zhao Julia Good Amanda Huang Hailey Lynn Wrona Jody liu chuan-ju liu Department of Orthopedic Surgery New York University Grossman School of MedicineNew YorkNY 10016United States Department of Medicine Division of Internal MedicineSaint Peter’s University HospitalRutgers UniversityNew BrunswickNJ 08901United States Cornell University IthacaNew YorkNYUnited States Department of Biomedical Engineering University of North Carolina Chapel HillChapel HillNC 27599United States New York University NY 14853United States Department of Cell Biology New York University Grossman School of MedicineNew YorkNY 10016United States Department of Orthopedics&Rehabilitation Yale University School of MedicineNew HavenCT 06510United States

Obesity has a multifactorial etiology and is known to be a state of chronic low-grade inflammation,known as *** state is associated with the development of metabolic disorders such as glucose intolerance and nonalcoholic fatty liver *** is a glycolytic metabolite and a crucial node in various metabolic ***,its role and molecular mechanism in obesity and associated complications are *** this study,we reported that pyruvate substantially inhibited adipogenic differentiation in vitro and its administration significantly prevented HFD-induced weight gain,white adipose tissue inflammation,and metabolic *** identify the target proteins of pyruvate,drug affinity responsive target stability was employed with proteomics,cellular thermal shift assay,and isothermal drug response to detect the interactions between pyruvate and its molecular ***,we identified cytosolic phospholipase A2(cPLA2)as a novel molecular target of pyruvate and demonstrated that pyruvate restrained diet-induced obesity,white adipose tissue inflammation,and hepatic steatosis in a cPLA2-dependent *** with global ablation of cPLA2 in mice showed that the protective effects of pyruvate were largely abrogated,confirming the importance of pyruvate/cPLA2 interaction in pyruvate attenuation of inflammation and ***,our study not only establishes pyruvate as an antagonist of cPLA2 signaling and a potential therapeutic option for obesity but it also sheds light on the mechanism of its ***’s prior clinical use indicates that it can be considered a safe and viable alternative for obesity,whether consumed as a dietary supplement or as part of a regular diet.

关键词： metabolic disease pyruvate cytosolic phospholipase obesity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Surficial modification enabling planar Al growth toward dendrite-free metal anodes for rechargeable aluminum batteries

引用

Science China Chemistry 2024年第4期67卷 1341-1351页

作者： Wenhao liu Yu Li Bo Long Haoyi Yang Lumin Zheng Ying Bai Feng Wu chuan Wu School of Materials Science and Engineering Beijing Institute of TechnologyBeijing 100081China Yangtze Delta Region Academy of Beijing Institute of Technology Jiaxing 314019China

Al metal possesses ultrahigh theoretical volumetric capacity of 8,040 m Ah cm^(-3),and gravimetric capacity of 2,980 m Ah g^(-1),and thus is highly attractive for electrochemical energy ***,it suffers from several issues,such as the dendrite formation,during Al stripping-deposition cycling,which has been verified to account for the short circuit and limited cyclic ***,we use a facile and applicable method to in-situ reconstruct the Al anode surface with F-Al-O chemical bonds,which could preferentially induce the planar growth of Al along the interface plane,thus leading to the dendrite-free morphology evolution during the *** from F-Al-O chemical bonds on the surface of Al anodes,long lifespan of symmetric cells can be realized even under 1 m A cm^(-2)and 1 m Ah cm^(-2).Coupling the F-Al anode with graphite-based cathodes,high-voltage dual-ion Al metal batteries can be achieved with long-term cycle stability up to 1,200 cycles(at 0.5 m A cm^(-2)),surpassing the counterparts using pristine Al metal ***,the effectiveness of this surficial modification strategy is also elucidated with the aid of theoretical *** work provides novel insights on low-cost and facile strategies against the Al dendrite growth in aluminum batteries.

关键词： rechargeable aluminum batteries Al metal anode Al dendrite dual-ion batteries surficial modification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enantioselective Synthesis of Benzimidazole Atropisomers Featuring a N-N Axis

引用

Chinese Journal of Chemistry 2024年第7期42卷 711-718页

作者： Fang-Bei Ge Qi-Kun Yin chuan-Jun Lu Xuan Xuan Jia Feng Ren-Rong liu College of Chemistry and Chemical Engineering Qingdao UniversityQingdaoShandong 266071China School of Pharmacy Key Laboratory of Molecular Pharmacology and Drug EvaluationMinistry of EducationYantai UniversityYantaiShandong 264005China

Atroposelective synthesis of N-N atropisomers is an emerging area but remains underexplored;in particular,the synthesis of N-N benzimidazole atropisomers is still ***,the first enantioselective synthesis of N-N benzimidazole atropisomers via the palladium-catalyzed de novo construction of benzimidazole skeleton is *** readily available palladium catalyst and biphosphine ligand,a broad range of nonbiaryl benzimidazole and indole-benzimidazole atropisomers were conveniently ac-cessed in high yields and with excellent ***,these N-N benzimidazole atropisomers showed great anti-tumor activity and selectivity to breast cancer MCF-7 *** simple catalytic system,broad substrate scope,high enantioselectivi-ty,and good bioactivity make this approach highly attractive.

关键词： Asymmetric synthesis Atropisomerism Palladium Benzimidazole Antitumor

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Synthesis of highly stable Ni nanoparticles via electrostatic self-assembly for enhanced hydrogen storage of MgH_(2)

引用

Rare Metals 2024年第9期43卷 4356-4366页

作者： Qin-Ke Tang Jiang-chuan liu Rui Shi Yun-Feng Zhu Ji-Guang Zhang Ya-Na liu Jun Wang Yao Zhang Xiao-Hui Hu Zhi-Bin liu Li-Quan Li College of Materials Science and Engineering Jiangsu Collaborative Innovation Centre for Advanced Inorganic Function CompositesNanjing Tech UniversityNanjing 211816China School of Materials Science and Engineering Southeast UniversityNanjing 211189China

Magnesium-based hydrides have been widely recognized as an appropriate choice for solid-state hydrogen ***,its undesirable thermodynamics and sluggish hydrogenation/dehydrogenation kinetics are major bottlenecks for its ***,a highly stable and highly dispersed Ni-based catalyst(Ni/Al_(2)O_(3)/GN)was fabricated to promote the hydrogen storage performance of MgH_(2)via the electrostatic effect of NiAl-LDH/GN precursor with a co-calcination reduction ***_(2)-5wt%Ni/Al_(2)O_(3)/GN exhibits excellent hydrogen storage performance,releasing about 5.7 wt%hydrogen in 3500 s at 250℃,and can reach a saturation hydrogen absorption of about 6.15 wt%in 3000 s at 100℃.Furthermore,it also shows low dehydrogenation apparent activation energy of 89.1 and 118.2 kJ·mol^(-1).Impressively,the catalyst ensures the stability of both the physical phase and structure during ball milling and cycling *** role of each phase in Ni/Al_(2)O_(3)/GN on the hydrogen storage performance of MgH_(2)was also discussed through experiments and theoretical calculation,and the synergistic catalytic mechanism of Ni/Al_(2)O_(3)/GN was clearly *** work provides a unique perspective for the preparation of highly stable and highly dispersible catalysts.

关键词： Magnesium hydride Ni/Al_(2)O_(3)/GN Hydrogen storage performance Catalytic mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：