检索结果-南通市图书馆

Deciphering a Million-Plus RSA Integer with Ultralow Local Field Coefficient h and Coupling Coefficient j of the Ising Model by D-Wave 2000Q

在线全文

学校读者我要写书评

暂无评论

Tsinghua Science and Technology 2024年第3期29卷 874-882页

作者： Chao wang Qiaoyun hu haonan Yao Sumin wang Zhi Pei joint International Research Laboratory of Specialty Fiber Optics and Advanced Communication Shanghai UniversityShanghai 200444China

This work is the first to determine that a real quantum computer(including generalized and specialized)can decipher million-scale RSA relying solely on quantum algorithms,showing the real attack potential of D-Wave *** influence of different column widths on RSA factorization results is studied on the basis of a multiplication table,and the optimal column method is determined by traversal *** traversal experiment of integer factorization within 10000 shows that the local field and coupling coefficients are 75%–93%lower than the research of Shanghai University in 2020 and more than 85%lower than that of Purdue University in *** low Ising model parameters are crucial to reducing the hardware requirements,prompting factoring 1245407 on the D-Wave 2000Q real machine.D-Wave advantage already has more than 5000 qubits and will be expanded to 7000 qubits during 2023–2024,with remarkable improvements in decoherence and *** machine is expected to promote the solution of large-scale combinatorial optimization *** of the contributions of this paper is the discussion of the long-term impact of D-Wave on the development of post-quantum cryptography standards.

关键词： quantum annealing RSA D-Wave 2000Q post-quantum cryptography

Research on Machining Mechanics and Experiment of Ultrasonic-Magnetorheological Compound Finishing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research on Machining Mechanics and Experiment of Ultrasonic...

Atomistic Investigation of Shock-Induced Amorphization within Micro-shear Bands in hexagonal Close-Packed Titanium

The International Conference on Surface Finishing Technology and Surface Engineering

作者： F.h. Zhang h.j. wang and D.R. Luan School of Mechatronics Engineering harbin Institute of Technology harbin 150001 China.

＜正＞In this paper, ultrasonic-magnetorheological compound finishing （UMC finishing）, which is a new kind of polishing method, is first presented for the ultraprecision machining of concave optical surface with small radius. The principle of ultrasonic-magnetorheological compound finishing is studied, and experimental set-up is developed based on the foregoing study. Experiments are carried out to verify the mechanics of ultrasonic-magnetorheological compound finishing. The results show that the surface roughness of the polished optical glass by ultrasonic-magnetorheological compound finishing is on nano-scale, which can satisfy the optical surface quality requirement. Furthermore, ultrasonic-magnetorheological compound finishing can also have higher machining efficiency than magnetorheological finishing under the same experiment conditions.

关键词： asphere magnetorheological finishing ultrasonic finishing polishing ultraprecision machining.

来源： cnki会议评论

在线全文

cnki会议

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1590-1600页

作者： Z.C.Meng K.G.wang T.Ali D.Li C.G.Bai D.S.Xu S.j.Li A.h.Feng G.j.Cao j.h.Yao Q.B.Fan h.wang R.Yang Institute of Metal Research Chinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Interdisciplinary Centre for Additive Manufacturing(ICAM) School of Materials and ChemistryUniversity of Shanghai for Science and TechnologyShanghai 200093China School of Materials Science and Engineering Tongji UniversityShanghai 201804China Key Laboratory for Light-Weight Materials Nanjing Tech UniversityNanjing 210009China National Key Laboratory of Science and Technology on Materials Under Shock and Impact School of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401135China

The mechanical response of a single crystal titanium sample against(0001)α surface impact was investigated using molecular dynamics ***,non-uniform plastic deformation was observed in the *** high strain rates,amorphization occurred near the edge of the contact region where severe shear strain induced a large number of stacking faults(SFs)and *** contrast,the central part of the contact region underwent less deformation with significantly fewer ***,instead of amorphization by consuming SFs and dislocations,there was a gradual increase in the density of dislocations and SFs during the process of *** local amorphous regions eventually grew into shear bands.

关键词： Shock compression Amorphization Shear band Titanium Molecular dynamics

The quasi-Gramian solution of a non-commutative extension of the higher-order nonlinear Schr?dinger equation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第3期76卷 51-61页

作者： h W A Riaz j Lin Department of Physics Zhejiang Normal UniversityJinhua 321004China

The nonlinear Schr?dinger(NLS)equation,which incorporates higher-order dispersive terms,is widely employed in the theoretical analysis of various physical *** this study,we explore the non-commutative extension of the higher-order NLS *** treat real or complex-valued functions,such as g_(1)=g_(1)(x,t)and g_(2)=g_(2)(x,t)as non-commutative,and employ the Lax pair associated with the evolution equation,as in the commutation *** derive the quasi-Gramian solution of the system by employing a binary Darboux *** soliton solutions are presented explicitly within the framework of *** visually understand the dynamics and solutions in the given example,we also provide simulations illustrating the associated ***,the solution can be used to study the stability of plane waves and to understand the generation of periodic patterns within the context of modulational instability.

关键词： integrable systems Darboux transformation solitons

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

在线全文

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： Y.Fu G.G.wang A.hu Y.Li K.B.Thacker j.P.Weiler h.hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada Global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(SY)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** Physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition Process parameter

Convexification of hybrid AC-DC Optimal Power Flow with Line-Commutated Converters

在线全文

学校读者我要写书评

暂无评论

CSEE journal of Power and Energy Systems 2024年第2期10卷 617-628页

作者： hongyuan Liang Zhigang Li j.h.Zheng Q.h.Wu School of Electric Power Engineering South China University of TechnologyGuangzhou 510641China

Line-commutated converter (LCC)-based high-voltage DC (hVDC) systems have been integrated with bulk AC power grids for interregional transmission of renewable power. The nonlinear LCC model brings additional nonconvexity to optimal power flow (OPF) of hybrid AC-DC power grids. A convexification method for the LCC station model could address such nonconvexity but has rarely been discussed. We devise an equivalent reformulation for classical LCC station models that facilitates second-order cone convex relaxation for the OPF of LCC-based AC-DC power grids. We also propose sufficient conditions for exactness of convex relaxation with its proof. Equivalence of the proposed LCC station models and properties, exactness, and effectiveness of convex relaxation are verified using four numerical simulations. Simulation results demonstrate a globally optimal solution of the original OPF can be efficiently obtained from relaxed model.

关键词： AC-DC power system convex relaxation linecommutated converter optimal power flow second-order cone programming

Evaluation of E-sail parameters on central spacecraft attitude stability using a high-fidelity rigid–flexible coupling model

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Astrodynamics 2024年第2期8卷 271-284页

作者： Chonggang Du Zheng h.Zhu Changqing wang Aijun Li Tuanjie Li School of Electro-Mechanical Engineering Xidian UniversityXi’an 710071China Department of Mechanical Engineering York University4700 Keele StreetTorontoOntario M3J 1P3Canada School of Automation Northwestern Polytechnical UniversityXi’an 710129China

This study examines the impact of electric solar wind sail(E-sail)parameters on the attitude stability of E-sail’s central spacecraft by using a comprehensive rigid–flexible coupling dynamic *** this model,the nodal position finite element method is used to model the elastic deformation of the tethers through interconnected two-node tensile *** attitude dynamics of the central spacecraft is described using a natural coordinate *** rigid–flexible coupling between the central spacecraft and its flexible tethers is established using Lagrange *** research reveals the significant influences of parameters such as tether numbers,tether’s electric potential,and solar wind velocity on attitude ***,solar wind fluctuations and the distribution of electric potential on the main tethers considerably affect the attitude stability of the *** consistent management,the angular velocities of the spacecraft must remain at target ***,the attitude stability of a spacecraft has a pronounced dependence on the geometrical configuration of the E-sail,with axisymmetric E-sails proving to be more stable.

关键词： electric solar wind sail(E-sail) space tether nodal position finite element method(NPFEM) natural coordinate formulation (NCF) attitude stability

Observability Analysis of Integrated Electricity and heating Systems with Thermal Quasi-dynamics in Pipelines

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE journal of Power and Energy Systems 2024年第3期10卷 1145-1158页

作者： Zhigang Li Wenjian Zheng junbo Zhao j.h.Zheng Q.h.Wu School of Electric Power Engineering South China University of TechnologyGuangzhou 510641China Fuzhou Changle District Power Supply Company of State Grid Fujian Electric Power Co. Ltd.Fuzhou 350000China Department of Electrical and Computer Engineering University of ConnecticutStorrsCT 06269USA CSEE IEEE

Observability analysis(OA)is vital to obtaining the available input measurements of state estimation(SE)in an integrated electricity and heating system(IEhS).Considering the thermal quasi-dynamics in pipelines,the measurement equations in heating systems are dependent on the estimated results,leading to an interdependency between OA and *** OA methods require measurement equations be known exactly before SE is performed,and they are not applicable to *** bridge this gap,a scenario-based OA scheme for IEhSs is devised that yields reliable analysis results for a predefined set of time-delay scenarios to cope with this *** its core procedure,the observable state identification and observability restoration are formulated in terms of integer linear *** tests are conducted to demonstrate the validity and superiority of the proposed formulation.

关键词： Integrated electricity and heating system measurement observability analysis state estimation thermal quasi-dynamics

Dissociation cross sections ofψ(3770),ψ(4040),ψ(4160),andψ(4415)mesons with nucleons

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Communications in Theoretical Physics 2024年第4期76卷 93-112页

作者： Ruo-Qing Ding Xiao-Ming Xu h.j.Weber Department of Physics Shanghai UniversityBaoshanShanghai 200444China Department of Physics University of VirginiaCharlottesvilleVA 22904United States of America

We study the dissociation of ψ(3770), ψ(4040), ψ(4160), and ψ(4415) mesons in collision with nucleons, which takes place in high-energy proton-nucleus collisions. The quark interchange between a nucleon and a ■ meson leads to the dissociation of the ■ meson. We consider the reactions:■, and■, where R stands for ψ(3770), ψ(4040), ψ(4160), or ψ(4415). A reaction of a neutron and a ■ meson corresponds to a reaction of a proton and the ■ meson by replacing the up quark with the down quark and vice versa. Transition-amplitude formulas are derived from the S-matrix *** cross sections are calculated with the transition amplitudes for scattering in the prior form and in the post form. The cross sections relate to nodes in the radial wave functions of ψ(3770), ψ(4040), ψ(4160), and ψ(4415) mesons.

关键词： inelastic nucleon-charmonium scattering quark interchange relativistic constituent quark potential model