检索结果-南通市图书馆

Rare Metals 2024年第9期43卷 4367-4376页

作者： wei Chen Ya-Hui Sun Tian Xu Xue-bin Yu guang-Lin Xia Department of Materials Science Fudan University

2LiBH4-MgH2composite is one of the most attractive reactive hydride composites with a theoretic hydrogen capacity of 10.8 wt%.However,the large nucleation restriction of MgB2during the second step of dehydrogenation results in sluggish hydrogen storage kinetics and high operating temperature,which hinders its practical application as on-board hydrogen storage ***,Al3Ti doped Al nanoparticles （AT NPs） are prepared by a facile chemical reduction reaction to improve the hydrogen storage performance of *** the initial H2desorption process,MgAlB4and TiB2that have identical crystal structure and low d-value mismatch with MgB2resulting from the reaction between AT NPs and 2LiBH4-MgH2composite serve as effective nucleation sites for the formation of *** a result,the apparent activation energy of the two-step H2desorption of AT NPs doped 2LiBH4-MgH2composite are notably decreased to （110.0±5.9） and（119.6±1.4） kJ·mol-1,which is 55.5 and 33.5 kJ·mol-1lower than that of the undoped *** importantly,a reversible hydrogen storage capacity of 9.2 wt%after 10cycles of H2desorption and adsorption could be achieved,corresponding to a capacity retention rate of 99%.The building of reactive bimetallic catalyst towards in situ formation of heterogeneous nucleation sites provides a new strategy for improving the hydrogen storage performance of reactive hydride composites.

关键词： Catalytic effects Heterogeneous nucleation Reactive hydride composites Reversible hydrogen storage

Corrosion resistance of a novel SnO2-doped dicalcium phosphate coating on AZ31 magnesium alloy

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Bioactive Materials 2018年第3期3卷 245-249页

作者： Lan-Yue Cui guang-bin wei Rong-Chang Zeng Shuo-Qi Li Yu-Hong Zou En-Hou Han College of Materials Science and Engineering Shandong University of Science and TechnologyQingdao266590China College of Chemical and Environmental Engineering Shandong University of Science and TechnologyQingdao266590China National Engineering Centre for Corrosion Control Institute of Metals ResearchChinese Academy of SciencesShenyang110016China

A SnO2-doped dicalcium phosphate coating was prepared on AZ31 alloy by means of hydrothermal *** results showed that the coating possessed a globular morphology with a long lamellar crystalline structure and a thickness of approximately 40 *** surface of the coating became smooth with an increase additive amount of the SnO2 *** corrosion current density and hydrogen evolution rate of the coating prepared in presence of SnO2 were reduced compared to the coating without SnO2 and the bare AZ31 substrate,indicating an improvement in the corrosion resistance of the SnO2-doped coating.

关键词： Phosphate coating Biomaterials Magnesium alloys Corrosion Stannic oxide

In vitro corrosion resistance and antibacterial performance of noveltin dioxide-doped calcium phosphate coating on degradable Mg-1Li-1Ca alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2019年第3期35卷 254-265页

作者： Lan-Yue Cui guang-bin wei Zhuang-Zhuang Han Rong-Chang Zeng Lei Wang Yu-Hong Zou Shuo-Qi Li Dao-Kui Xu Shao-Kang Guan College of Materials Science and Engineering Shandong University of Science and Technology College of Chemical and Environmental Engineering Shandong University of Science and Technology CAS Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal Research Chinese Academy of Sciences School of Materials Science and Engineering Zhengzhou University

A SnO_2-doped calcium phosphate(Ca-P-Sn) coating was constructed on Mg-1 Li-1 Ca alloy by a hydrothermal process. The fabricated functional coatings were investigated using scanning electron microscopy(SEM), X-ray diffraction(XRD) and Fourier transform infrared spectroscopy(FT-IR). A triple-layered structure, which is composed of Ca_3(PO_4)_2,(Ca, Mg)_3(PO_4)_2, SnO_2, and MgHPO_4·3 H_2O, is evident and leads to the formation of Ca_(10)(PO_4)_6(OH)_2 in Hank's solution. Electrochemical measurements, hydrogen evolution tests and plating counts reveal that the corrosion resistance and antibacterial activity were improved through the coating treatment. The embedded SnO_2 nanoparticles enhanced crystallisation of the *** formation and degradation mechanisms of the coating were discussed.

关键词： Magnesium alloys Coatings Corrosion Biomedical materials

Diabetic retinopathy identification based on multi-sourcefree domain adaptation

在线全文

学校读者我要写书评

暂无评论

International Journal of Ophthalmology(English edition) 2024年第7期17卷 1193-1204页

作者： guang-Hua Zhang guang-Ping Zhuo Zhao-Xia Zhang bin Sun wei-Hua Yang Shao-Chong Zhang School of Big Data Intelligent Diagnosis&Treatment Industry Taiyuan UniversityTaiyuan 030032Shanxi ProvinceChina Shanxi Key Laboratory of Intelligent Optimization Computing and Blockchain Technology Taiyuan Normal UniversityTaiyuan 030619Shanxi ProvinceChina Shanxi Eye Hospital Taiyuan 030002Shanxi ProvinceChina College of Computer Science and Technology Taiyuan Normal UniversityTaiyuan 030619Shanxi ProvinceChina Shenzhen Eye Institute Shenzhen Eye HospitalJinan UniversityShenzhen 518040Guangdong ProvinceChina

AIM:To address the challenges of data labeling difficulties,data privacy,and necessary large amount of labeled data for deep learning methods in diabetic retinopathy(DR)identification,the aim of this study is to develop a source-free domain adaptation(SFDA)method for efficient and effective DR identification from unlabeled ***:A multi-SFDA method was proposed for DR *** method integrates multiple source models,which are trained from the same source domain,to generate synthetic pseudo labels for the unlabeled target ***,a softmax-consistence minimization term is utilized to minimize the intra-class distances between the source and target domains and maximize the inter-class *** is performed using three color fundus photograph datasets(APTOS2019,DDR,and EyePACS).RESULTS:The proposed model was evaluated and provided promising results with respectively 0.8917 and 0.9795 F1-scores on referable and normal/abnormal DR identification *** demonstrated effective DR identification through minimizing intra-class distances and maximizing inter-class distances between source and target ***:The multi-SFDA method provides an effective approach to overcome the challenges in DR *** method not only addresses difficulties in data labeling and privacy issues,but also reduces the need for large amounts of labeled data required by deep learning methods,making it a practical tool for early detection and preservation of vision in diabetic patients.

关键词： diabetic retinopathy multisource-free domain adaptation pseudo-label generation softmaxconsistence minimization

Novel sandwich structured glass fiber Cloth/Poly(ethylene oxide)-MXene composite electrolyte

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Materials Science 2024年第1期6卷 60-67页

作者： Yu-Qin Mao guang-He Dong wei-bin Zhu Yuan-Qing Li Pei Huang Shao-Yun Fu College of Aerospace Engineering Chongqing UniversityChongqing400044China State Key Laboratory of Power Transmission Equipment and System Security and New Technology Chongqing UniversityChongqing400044China

Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal *** this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal *** PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale *** as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of ***,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO *** addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li ***,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention *** developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.

关键词： Solid polymer electrolyte Ti_(3)C_(2)T_(x)MXene Poly(ethylene oxide) Glass fiber cloth All-solid-state Li metal Battery

Synthesis-temperature-dependent phase composition manipulation toward high thermoelectric performance in tetrahedrites

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第1期168卷 124-130页

作者： Yiqing wei Jiaqi Liu Zien Cheng Pengfei Jiang Zizhen Zhou bin Zhang Guoyu Wang guang Han Xu Lu Xiaoyuan Zhou Center of Quantum Materials and Devices College of PhysicsChongqing UniversityChongqing 401331China College of Materials Science and Engineering Chongqing UniversityChongqing 400044China College of Chemistry and Chemical Engineering Chongqing UniversityChongqing 401331China Analytical and Testing Center Chongqing UniversityChongqing 401331China

Tetrahedrite,an Earth-abundant natural mineral,has attracted extensive research interest because of its excellent thermoelectric ***,tetrahedrite samples comprising Cu-poor Cu_(12)Sb_(4)S_(13)and Cu-rich Cu_(14)Sb_(4)S_(13)phases have been synthesized using a colloidal method,in which the ratio of two phases is manipulated by controlling the synthesis temperature to improve the thermoelectric *** is found that an ultralow total thermal conductivity of∼0.3 W m^(−1)K^(−1)at 723 K is realized in the sample with a Cu-rich phase fraction of∼50%,which can be attributed to maximized phonon scattering by phase *** a result,combined with a decent power factor,this sample obtains an optimal zT of 1.15,which is about 85%higher than that of the sample with a Cu-rich phase fraction of∼64%and comparable to zT values of other eco-friendly,abundant Cu-based thermoelectric *** work demonstrates an effective synthesis-temperature-dependent phase composition manipulation strategy toward enhanced thermoelectric performance in tetrahedrites.

关键词： Tetrahedrite Thermoelectric Colloidal method Phase manipulation Thermal conductivity

Design and application of copper/lithium composite anodes for advanced lithium metal batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 942-970页

作者： bin Zhang Ji-Ping Ma Yang Zhao Tong Li Jin-Lin Yang Zhan-Ling Zhang Shi-Zhong wei guang-Min Zhou School of Materials Science and Engineering Henan University of Science and TechnologyLuoyang 471003China Shenzhen Geim Graphene Center Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China School of Physical and Mathematical Sciences Nanyang Technological UniversitySingapore 637371Singapore Shenzhen Geim Graphene Center Tsinghua-Berkeley Shenzhen InstituteTsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen 518055China

Lithium(Li)is a promising candidate for nextgeneration battery anode due to its high theoretical specific capacity and low reduction ***,safety issues derived from the uncontrolled growth of Li dendrite and huge volume change of Li hinder its practical application.C onstructing dendrite-free composite Li anodes can significantly alleviate the above ***(Cu)-based materials have bee n widely used as substrates of the composite electrodes due to their chemical stability,excellent conductivity,and good mechanical ***/lithium(Cu/Li)composite anodes significantly regulate the local current density and decrease Li nucleation overp otential,realizing the uniform and dendrite-free Li *** this review,Cu/Li composite methods including electrodeposition,melting infusion,and mechanical rolling are systematically summarized and ***,design strategies of Cu-based current collectors for high performance Cu/Li composite anodes are *** challenges and future development for Cu/Li composite anodes are presented and *** hope that this review can provide a comprehensive understanding of Cu/Li composite methods of the latest development of Li metal anode and stimulate more research in the future.

关键词： Lithium metal batteries Cu/Li composite anode Electrodeposition Thermal melting infusion Mechanical rolling

Immune checkpoint inhibition mediated with liposomal nanomedicine for cancer therapy

在线全文

学校读者我要写书评

暂无评论

Military Medical Research 2024年第1期11卷 98-114页

作者： guang-Long Ma wei-Feng Lin Faculty of Medicine Centre for Cancer ImmunologyUniversity of SouthamptonSouthampton SO166YDUK Department of Molecular Chemistry and Materials Science Weizmann Institute of Science76100 RehovotIsrael Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education School of ChemistryBeihang UniversityBeijing 100191China

Immune checkpoint blockade(ICB)therapy for cancer has achieved great success both in clinical results and on the *** the same time,success drives more attention from scientists to improve ***,only a small portion of patients are responsive to this therapy,and it comes with a unique spectrum of side effects termed immunerelated adverse events(irAEs).The use of nanotechnology could improve ICBs’delivery to the tumor,assist them in penetrating deeper into tumor tissues and alleviate their *** nanomedicine has been investigated and used for decades,and is well-recognized as the most successful nano-drug delivery *** successful combination of ICB with liposomal nanomedicine could help improve the efficacy of ICB *** this review,we highlighted recent studies using liposomal nanomedicine(including new emerging exosomes and their inspired nanovesicles)in associating ICB therapy.

关键词： Liposome Exosome Immune checkpoint blockade(ICB)

Insight into vertical piezoelectric characteristics regulated thermal transport in van der Waals two-dimensional materials

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第2期43卷 770-779页

作者： Dong-Hai wei E Zhou Jin-Yuan Xu Hui-Min Wang Chen Shen Hong-bin Zhang Zhen-Zhen Qin guang-Zhao Qin State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body College of Mechanical and Vehicle EngineeringHunan UniversityChangsha410082China Hunan Key Laboratory for Micro-Nano Energy Materials and Device and School of Physics and Optoelectronics Xiangtan UniversityXiangtan411105China Institute of Materials Science Technical University of DarmstadtAlarich-Weiss-Str.264287DarmstadtGermany School of Physics and Microelectronics Zhengzhou UniversityZhengzhou450001China

The urgent demand of extreme(ultra-high/low)thermal conductivity materials is triggered by the high-power device,where exploring the theories and mechanisms of regulating thermal transport properties plays a key ***,we elaborately investigate the effect of vertical(out-of-plane)piezoelectric characteristics on thermal transport,which is historically *** different stacking-order(AA and AB)bilayer boron nitride(Bi-BN)in two-dimensional(2D)materials are selected as study *** performing state-of-the-art first-principles calculations,it is found that the polarization charge along the out-of-plane orientation ascends significantly with the increasing piezoelectric response in AB stacked Bi-BN(Bi-BN-AB)followed by the enhanced interlayer B–N atomic ***,the amplitude of phonon anharmonicity in Bi-BN-AB increases larger than that in the AA stacked Bi-BN(Bi-BN-AA),resulting in the dramatic weakening of the thermal conductivity by 20.34%under 18%*** research reveals the significant role of the vertical(out-of-plane)piezoelectric characteristic in regulating thermal transport and provides new insight into accurately exploring the thermal transport performance of 2D van der Waals materials.

关键词： Thermal conductivity Piezoelectric effect 2D materials Bilayer BN Strain engineering

Optimizing mechanical properties of HIPS fabricated with low-cost desktop 3D printers:investigating the impact of process parameters

在线全文

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第2期12卷 379-395页

作者： Jin-Ting Xu guang-wei Zhang Man-Man Chen School of Automotive Engineering Dalian University of TechnologyDalian116024People’s Republic of China

Recently,low-cost desktop three-dimensional(3D)printers,employing the fused deposition modeling(FDM)technique,have gained widespread ***,most users cannot test the strength of printed parts,and little information is available about the mechanical properties of printed high-impact polystyrene(HIPS)parts using desktop 3D *** this study,the user-adjustable parameters of desktop 3D printers,such as crisscross raster orientation,layer thickness,and infill density,were *** experimental plans were designed using the Box-Behnken method,and tensile,3-point bending,and compression tests were carried out to determine the mechanical responses of the printed *** prediction models of the process parameters were regressed to produce the optimal combination of process *** experimental results showcase that the crisscross raster orientation has significant effects on the flexural and compression strengths,but not on the tensile *** an increase in the layer thickness,the tensile,flexural,and compression strengths first decreased and then increased,reaching their minimum values at approximately 0.16 mm layer *** addition,they all increased with an increase of infill *** was demonstrated that when the raster orientation,layer thickness,and infill density were 13.08°/–76.92°,0.09 mm,and 80%,respectively,the comprehensive mechanical properties of the printed HIPS were *** results can help end-users of desktop 3D printers understand the effects of process parameters on the mechanical properties,and offer practical suggestions for setting proper printing parameters for fabricating HIPS parts.

关键词： Desktop three-dimensional(3D)printers Fused deposition modeling(FDM) High-impact polystyrene(HIPS) Process parameters