检索结果-南通市图书馆

International Journal of Minerals,Metallurgy and Materials 2024年第4期31卷 786-794页

作者： Xu Zhao Naitao gao shengcheng Wu Shaozhen li Sujuan Wu School of Electrical and Electronic Engineering Wuhan Polytechnic UniversityWuhan 430023China Institute for Advanced Materials and Guangdong Provincial Key Laboratory of Quantum Engineering and Quantum Materials South China Academy of Advanced OptoelectronicsSouth China Normal UniversityGuangzhou 510006China

CsPbX_(3)-based(X=I,Br,Cl)inorganic perovskite solar cells(PSCs)prepared by low-temperature process have attracted much attention because of their low cost and excellent thermal ***,the high trap state density and serious charge recombination between low-temperature processed TiO_(2)film and inorganic perovskite layer interface seriously restrict the performance of all-inorganic *** a thin polyethylene oxide(PEO)layer is employed to modify TiO_(2)film to passivate traps and promote carrier *** impacts of PEO layer on microstructure and photoelectric characteristics of TiO_(2)film and related devices are systematically *** results suggest that PEO modification can reduce the surface roughness of TiO_(2)film,decrease its average surface potential,and passivate trap *** optimal conditions,the champion efficiency of CsPbI_(2)Br PSCs with PEO-modified TiO_(2)(PEO-PSCs)has been improved to 11.24%from 9.03%of reference ***,the hysteresis behavior and charge recombination have been suppressed in PEO-PSCs.

关键词： polyethylene oxide-modified TiO_(2) film low-temperature process CsPbI_(2)Br-based all-inorganic perovskite solar cells photo-voltaic performance

Energy-absorbing porous materials:Bioinspired architecture and fabrication

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第2期17卷 679-690页

作者： Junheng Zhao Meng li Jiewei Chen Weiwei gao Hao Bai State Key Laboratory of Chemical Engineering College of Chemical and Biological EngineeringZhejiang UniversityHangzhou 310058China Department of Polymer Science and Engineering Zhejiang UniversityHangzhou 310058China

Energy-absorbing materials are widely used in transportations,sports,and the military ***,porous materials,including natural and artificial materials,have attracted tremendous attentions due to their light weight and excellent energy absorption *** review summarizes the recent progresses in the natural and artificial energy-absorbing porous ***,we review the typical natural porous materials including cuttlebone,bighorn sheep horn,pomelo peel,and sunflower stem *** architectures,energy absorption abilities,and mechanisms of these typical natural materials and their bioinspired materials are ***,we provide a review on the fabrication methods of artificial energy-absorbing porous materials,such as conventional foaming and three-dimensional(3D)***,we address the challenges and prospects for the future development of energy-absorbing porous *** importantly,our review provides a direct guidance for the design and fabrication of energy-absorbing porous materials required for various engineering applications.

关键词： energy-absorbing porous materials natural materials natural structures bioinspired materials

Advances in friction of aluminium alloy deep drawing

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第3期12卷 396-427页

作者： Yiren gao Hongxia li Danyang ZHAO Minjie WANG Xiaobo FAN School of Mechanical Engineering Dalian University of TechnologyDalian 116023China

Broad use of lightweight aluminium alloy parts in automobile manufacturing,aerospace,electronic communication,and rail transit is mainly formed through deep drawing *** drawing friction is a key boundary condition for controlling the forming quality of aluminium alloy ***,due to the oxidation and adhesion tendency of aluminium alloys,the tribological situations of aluminium alloy deep drawing(AADD)system is more complicated than those of traditional deep drawing of steel ***,the study of AADD friction is essential for manufacturing high-performance aluminium alloy ***,aiming to provide a valuable reference for researchers in related fields,a comprehensive review of AADD friction is provided,including friction mechanism,influencing factors,friction measurement,friction model,friction simulation,and lubrication-free friction ***,a brief conclusion and several current challenges were discussed.

关键词： aluminium alloy deep drawing(AADD) influencing factors friction measurement friction model friction control

A brief review of tribological properties for black phosphorus

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第5期12卷 823-844页

作者： Fanfan LV Wei WANG Jinjin li Yuan gao Kuaishe WANG College of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an710055China State Key Laboratory of Tribology in Advanced Equipment Tsinghua UniversityBeijing10084China

Black phosphorus (BP) is a new class of two-dimensional (2D) layered material, which shows the unanticipated characteristics in many aspects including electronics, transistors, sensors, energy storage, batteries, photocatalysis, and other applications due to its high charge carrier mobility, tunable direct bandgap, and unique in-plane anisotropic structure. In addition, BP has drawn tremendous attention in the field of tribology due to the low shear strength, the layered structure, and the weak connected force between the layers by van der Waals interaction. In recent years, many significant progresses have been made in experimental studies on BP materials as solid lubricants or lubrication additives. This work offers a review of researching regarding the tribological properties of BP. Moreover, the lubrication mechanisms of BP as the lubrication additive including the formation of the tribo-film, micro-bearing effect, and self-repair performance are also summarized. Finally, the current challenges and prospects of BP material as lubricant are proposed.

关键词： black phosphorus(BP) two-dimensional(2D)layered material lubrication additives tribological mechanisms

Research on feed-pulse collaborative control method in micro-electrical discharge machining

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第2期12卷 270-287页

作者： Qiang gao Ya-Ou Zhang Xue-Cheng Xi Yuan-Ding Wang Xiao-Fei Chen Wan-sheng Zhao School of Mechanical Engineering Shanghai Jiao Tong UniversityShanghai200240People’s Republic of China State Key Laboratory of Mechanical System and Vibration Shanghai200240People’s Republic of China Shanghai Institute of Space Propulsion Shanghai201112People’s Republic of China

Reducing the short-circuit rate and increasing the effective discharge rate are important targets for improving the servo control effect of micro-electrical discharge machining(micro-EDM),as these two indicators are closely related to the machining efficiency and *** this study,a feed-pulse collaborative control(FPCC)method is proposed for micro-EDM based on two dimensions(space and time).In the spatial dimension,a feed control strategy with a discharge holding process is ***,in the time dimension,a forward-looking pulse control strategy is adopted,in which the pulse interval is adjusted based on a sequence analysis of feed commands and discharge *** experiments are carried out to determine the key parameters used in this method,including the discharge holding threshold and pulse interval adjustment value(T_(off_(adj))).The feed smoothness and discharge sufficiency analyses of the experimental results show that compared to the traditional double threshold average voltage method,the FPCC method reduces the number of long-distance retreats by 64%and improves the effective discharge time by 40%.

关键词： Micro-electrical discharge machining(micro-EDM) Electrode feed control Discharge pulse control Machining surface quality

Preparation and combustion properties of laminated sticks of B-CuO and B-Bi_(2)O_(3)

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第8期38卷 67-74页

作者： Haoyu Song Chenyang li Fubing gao Chongwei An Shijiao li Xuan Zhan Jianchen He School of Environment and Safety Engineering North University of ChinaTaiyuan 030051China Chongqing Military Agency of the Army Chongqing 400060China

To explore the composite process of B-CuO and B-Bi_(2)O_(3) two-component laminated sticks,obtain the corresponding sticks with good printing effect,and explore the energy release *** this study,boron,copper oxide,and bismuth trioxide powders were dispersed in the dispersed phase (DMF) using F_(2602) as a binder,and the construction of two-component B-CuO,B-Bi_(2)O_(3),three-component microcomposite,and three-component macro-composite sticks were realized with the help of double nozzle direct ink writing (DIW) technique *** resulting sticks were ignited by a nichrome wire energized with a direct current,and a high-speed camera system was used to record the combustion behavior of the sticks,mark the flame position,and calculate the rate of *** results showed that the B-CuO stick burning rate (42.11 mm·s^(-1)) was much higher than that of B-Bi_(2)O_(3)(17.84 mm·s^(-1)).The formulation with the highest CuO content (ω_(CuO)=58.7%) in the microscale composite of the sticks also had the fastest burning rate of 60.59 mm·s^(-1),as the CuO content decreased (ω_(CuO)=43.5%,29.3%),its burning rate decreased to 34.78 mm·s^(-1),37.97 mm·s^(-1).The stick with the highest copper oxide content(ω_(CuO)=60%) also possessed the highest burning rate (48.84 mm·s^(-1)) in the macro-composite sticks,and the burning rates of the macro-composite sticks with component spacing of 0.1 mm,0.2 mm,and 0.5 mm were 43.34 mm·s^(-1),48.84 mm·s^(-1),and 40.76 mm·s^(-1).

关键词： Boron-based thermite Direct ink writing linear burning rate Multi-component composite

In vivo imaging reveals a synchronized correlation among neurotransmitter dynamics during propofol and sevoflurane anesthesia

在线全文

学校读者我要写书评

暂无评论

Zoological Research 2024年第3期45卷 679-690页

作者： gao-lin Qiu li-Jun Peng Peng Wang Zhi-Lai Yang Ji-Qian Zhang Hu liu Xiao-Na Zhu Jin Rao Xue-sheng liu Department of Anesthesiology First Affiliated Hospital of Anhui Medical UniversityHefeiAnhui 230022China School of life Science and Technology ShanghaiTech UniversityShanghai 201210China

General anesthesia is widely applied in clinical ***,the precise mechanism of loss of consciousness induced by general anesthetics remains ***,we measured the dynamics of five neurotransmitters,includingγ-aminobutyric acid,glutamate,norepinephrine,acetylcholine,and dopamine,in the medial prefrontal cortex and primary visual cortex of C57BL/6 mice through in vivo fiber photometry and genetically encoded neurotransmitter sensors under anesthesia to reveal the mechanism of general anesthesia from a neurotransmitter *** revealed that the concentrations of γ-aminobutyric acid,glutamate,norepinephrine,and acetylcholine increased in the cortex during propofol-induced loss of *** levels did not change following the hypnotic dose of propofol but increased significantly following surgical doses of propofol ***,the concentrations of the five neurotransmitters generally decreased during sevoflurane-induced loss of ***,the neurotransmitter dynamic networks were not synchronized in the non-anesthesia groups but were highly synchronized in the anesthetic *** findings suggest that neurotransmitter dynamic network synchronization may cause anesthetic-induced loss of consciousness.

关键词： General anesthesia Loss of consciousness In vivo neurotransmitter imaging Medial prefrontal cortex Primary visual cortex

Theory,technology and application of grouted bolting in soft rock roadways of deep coal mines

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第7期31卷 1463-1479页

作者： Hongpu Kang Jianwei Yang Pengfei Jiang Fuqiang gao Wenzhou li Jiafeng li Huiyuan Chen Coal Mining Research Institute China Coal Technology and Engineering Group Co.Ltd.Beijing 100013China Coal Mining Branch China Coal Research InstituteBeijing 100013China State Key Laboratory of Intelligent Mining and Strata Control Beijing 100013China

The grouted bolt,combining rock bolting with grouting techniques,provides an effective solution for controlling the surrounding rock in deep soft rock and fractured *** has been extensively applied in numerous deep mining areas characterized by soft rock roadways,where it has demonstrated remarkable control *** article systematically explores the evolution of grouted bolting,covering its theoretical foundations,design methods,materials,construction processes,monitoring measures,and methods for assessing its *** overview encompassed several key elements,delving into anchoring theory and grouting reinforcement *** new principle of high pretensioned high-pressure splitting grouted bolting collaborative active control is introduced.A fresh method for dynamic information design is also *** discussion touches on both conventional grouting rock bolts and cable bolts,as well as innovative grouted rock bolts and cables characterized by their high pretension,strength,and sealing hole *** examination of the merits and demerits of standard inorganic and organic grouting materials versus the new inorganic–organic composite materials,including their specific application conditions,was ***,the article presents various methods and instruments to assess the support effect of grouting rock bolts,cable bolts,and grouting ***,it provides a foundation for understanding the factors influencing decisions on grouted bolting timing,the sequence of grouting,the pressure applied,the volume of grout used,and the strategic arrangement of grouted rock bolts and cable *** application of the high pretensioned high-pressure splitting grouted bolting collaborative control technology in a typical kilometer-deep soft rock mine in China—the soft coal seam and soft rock roadway in the Kouzidong coal mine,Huainan coal mining area,was ***,the existing problems in grouted bolting control

关键词： deep coal mine soft rock roadway grouted bolting rock bolt and cable grouting material high-pressure splitting grouting collaborative control technology

A Hybrid Level Set Optimization Design Method of Functionally Graded Cellular Structures Considering Connectivity

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第4期79卷 1-18页

作者： Yan Dong Kang Zhao liang gao Hao li The State Key Lab of Digital Manufacturing Equipment and Technology Huazhong University of Science and TechnologyWuhan430074China Institute of Systems Engineering China Academy of Engineering PhysicsMianyang621900China

With the continuous advancement in topology optimization and additive manufacturing(AM)technology,the capability to fabricate functionally graded materials and intricate cellular structures with spatially varying microstructures has grown ***,a critical challenge is encountered in the design of these structures–the absence of robust interface connections between adjacent microstructures,potentially resulting in diminished efficiency or macroscopic failure.A Hybrid Level Set Method(HLSM)is proposed,specifically designed to enhance connectivity among non-uniform microstructures,contributing to the design of functionally graded cellular *** HLSM introduces a pioneering algorithm for effectively blending heterogeneous microstructure ***,an interpolation algorithm is presented to construct transition microstructures seamlessly connected on both ***,the algorithm enables the morphing of non-uniform unit cells to seamlessly adapt to interconnected adjacent *** method,seamlessly integrated into a multi-scale topology optimization framework using the level set method,exhibits its efficacy through numerical examples,showcasing its prowess in optimizing 2D and 3D functionally graded materials(FGM)and multi-scale topology *** essence,the pressing issue of interface connections in complex structure design is not only addressed but also a robust methodology is introduced,substantiated by numerical evidence,advancing optimization capabilities in the realm of functionally graded materials and cellular structures.

关键词： Hybrid level set method functionally graded cellular structure connectivity interpolated transition optimization design

Programmable synthetic receptors:the next-generation of cell and gene therapies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Signal Transduction and Targeted Therapy 2024年第2期9卷 376-400页

作者： Fei Teng Tongtong Cui li Zhou Qingqin gao Qi Zhou Wei li University of Chinese Academy of Sciences Beijing 101408China State Key Laboratory of Stem Cell and Regenerative Biology Institute of ZoologyChinese Academy of SciencesBeijing 100101China Institute for Stem Cell and Regeneration Chinese Academy of SciencesBeijing 100101China Beijing Institute for Stem Cell and Regenerative Medicine Beijing 100101China

Cell and gene therapies hold tremendous promise for treating a range of difficult-to-treat ***,concerns over the safety and efficacy require to be further addressed in order to realize their full *** receptors,a synthetic biology tool that can precisely control the function of therapeutic cells and genetic modules,have been rapidly developed and applied as a powerful *** designed and engineered,they can be applied to finetune the therapeutic activities,i.e.,to regulate production of dosed,bioactive payloads by sensing and processing user-defined signals or *** review provides an overview of diverse synthetic receptor systems being used to reprogram therapeutic cells and their wide applications in biomedical *** a special focus on four synthetic receptor systems at the forefront,including chimeric antigen receptors(CARs)and synthetic Notch(synNotch)receptors,we address the generalized strategies to design,construct and improve synthetic ***,we also highlight the expanding landscape of therapeutic applications of the synthetic receptor systems as well as current challenges in their clinical translation.

关键词： synthetic landscape payload