检索结果-南通市图书馆

Repeatability and reproducibility of corneal higher-order aberrations measurements after small incision lenticule extraction using the Scheimpfug-Placido topographer

引用

Eye and Vision 2024年第1期10卷 1-9页

作者： Rui ning Rongrong gao David PPiñero jun Zhang Qingyi gao Yili Jin Yiran Wang Chenxiao Wang Jinhai Huang Eye Hospital and School of Ophthalmology and Optometry Wenzhou Medical UniversityWenzhouZhejiangChina Eye Institute and Department of Ophthalmology Eye and ENT HospitalFudan UniversityShanghaiChina Group of Optics and Visual Perception Department of OpticsPharmacology and AnatomyUniversity of AlicanteAlicanteSpain NHC Key Laboratory of Myopia(Fudan University) Key Laboratory of MyopiaChinese Academy of Medical SciencesShanghaiChina Shanghai Research Center of Ophthalmology and Optometry ShanghaiChina

Background:To evaluate the precision of corneal higher-order aberrations measurements after small incision lenticule extraction(SMILE)using the Sirius Scheimpfug-Placido topographer(CSO,Italy).Methods:Seventy-fve eyes from 75 postoperative subjects were included in this prospective *** consecutive corneal aberrometric measurements were obtained with the Scheimpfug-Placido topographer by two experienced operators to assess intra-and inter-observer *** within-subject standard deviation(Sw),test-retest repeatability(TRT)and the intraclass correlation coefcient(ICC)were ***:For intraobserver repeatability of anterior and total corneal aberrations,all ICCs were more than 0.922,except for trefoil(0.722 to 0.768).The ICCs of total root mean square(RMS),coma Z(3,±1),and spherical aberration Z(4,0)were over 0.810 while higher-order RMS,trefoil Z(3,±3),and astigmatism II Z(4,±2)were below 0.634 for posterior corneal surface *** Sw values for all types of aberrations were equal to or below 0.07μ*** interobserver reproducibility,all TRT values were no more than 0.12μm,0.05μm,and 0.11μm for anterior,posterior,and total corneal aberrations,*** ICC values ranged from 0.875 to 0.989,from 0.686 to 0.976 and over 0.834 for anterior,posterior,and total corneal aberrations,***:The repeatability of measurements of anterior and total corneal aberrations with the Sirius system in corneas after SMILE surgery was high,except for *** was some variability in posterior corneal aberrometric *** reproducibility of corneal aberrometric measurements was observed between measurements of both examiners,except for trefoil,with poor to moderate reproducibility.

关键词： Sirius Higher-order aberrations Repeatability Reproducibility Small incision lenticule extraction

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effects of orientation on the fatigue crack growth behaviors of the ZK60 magnesium alloy in air and PBS

引用

Journal of Magnesium and Alloys 2024年第1期12卷 281-294页

作者： Jiaqi Hu Zheng Liu Zuoliang ning Hong gao School of Chemical Engineering and Technology Tianjin UniversityTianjin 300072China Tianjin Key Laboratory of Chemical Process Safety and Equipment Technology Tianjin 300072China

Strong anisotropic corrosion and mechanical properties caused by specimen orientations greatly limit the applications of wrought magnesium *** investigate the influences of specimen orientation,the corrosion tests and(corrosion)fatigue crack growth tests were *** rolled and transverse surfaces of the materials show distinct corrosion rate differences in the stable corrosion stage,but the truth is the opposite for the initial stage of *** air,specimen orientations have a significant influence on the plastic deformation mechanisms near the crack tip,which results in different fatigue fracture surfaces and cracking *** with R-T specimens,N-T specimens show a slower fatigue crack growth(FCG)rate in air,which can be attributed to crack closure effects and deformation twinning near the crack *** corrosion environment will not significantly change the main plastic deformation mechanisms for the same type of ***,the FCG rate in phosphate buffer saline(PBS)is one order of magnitude higher than that in air,which is caused by the combined effects of hydrogen-induced cracking and anodic *** to the similar corrosion rates at crack tips,the specimens with different orientations display close FCG rates in PBS.

关键词： Magnesium alloy Orientation Corrosion Fatigue crack growth

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

In-Situ SRPES Study on the Band Alignment of (0001)CdS/CdTe Heterojunction

引用

Chinese Physics Letters 2012年第5期29卷 201-204页

作者： gao jun-ning JIE Wan-Qi YUAN Yan-Yan ZHA Gang-Qiang XU Ling-Yan WU Heng WANG Ya-Bin YU Hui ZHU jun-Fa State Key Laboratory of Solidification Processing School of Materials Science and EngineeringNorthwestern Polytechnical UniversityXi’an 710072 National Synchrotron Radiation Laboratory University of Science and Technology of ChinaHefei 230029

The band alignment of a (0001)CdS/CdTe heterojunction is in situ studied by synchrotron radiation photoemission spectroscopy (SRPES).The heterojunction is formed through stepwise deposition of a CdTe film on a wurtzite (0001)CdS single crystalline substrate via molecular beam *** shows an upward band bending of 0.55 eV,the valence band offset △Ev is calculated to be 0.65 e V and the conduction band offset △ Ec is 0.31 *** interracial band alignment is sketched to display type-Ⅰ band alignment.

关键词： alignment sketch bending

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Constructing Built-In Electric Fields with Semiconductor junctions and Schottky junctions Based on Mo-MXene/Mo-Metal Sulfides for Electromagnetic Response

引用

Nano-Micro Letters 2024年第10期16卷 453-473页

作者： Xiaojun Zeng Xiao Jiang Ya ning Yanfeng gao Renchao Che School of Materials Science and Engineering Jingdezhen Ceramic UniversityJingdezhen 333403People's Republic of China School of Materials Science and Engineering Shanghai UniversityShanghai 200444People's Republic of China Laboratory of Advanced Materials Shanghai Key Lab of Molecular Catalysis and Innovative MaterialsAcademy for Engineering and TechnologyFudan UniversityShanghai 200438People's Republic of China Zhejiang Laboratory Hangzhou 311100People's Republic of China

The exploration of novel multivariate heterostructures has emerged as a pivotal strategy for developing high-performance electromagnetic wave(EMW)absorption ***,the loss mechanism in traditional heterostructures is relatively simple,guided by empirical observations,and is not *** this work,we presented a novel semiconductor-semiconductor-metal heterostructure sys-tem,Mo-MXene/Mo-metal sulfides(metal=Sn,Fe,Mn,Co,Ni,Zn,and Cu),including semiconductor junctions and Mott-Schottky *** skillfully combining these distinct functional components(Mo-MXene,MoS_(2),metal sulfides),we can engineer a multiple heterogeneous interface with superior absorption capabilities,broad effective absorption bandwidths,and ultrathin matching *** successful establishment of semiconductor-semiconductor-metal heterostructures gives rise to a built-in electric field that intensifies electron transfer,as confirmed by density functional theory,which collaborates with multiple dielectric polarization mechanisms to substantially amplify EMW *** detailed a successful synthesis of a series of Mo-MXene/Mo-metal sulfides featuring both semiconductor-semiconductor and semiconductor-metal *** achievements were most pronounced in Mo-MXene/Mo-Sn sulfide,which achieved remarkable reflection loss values of-70.6 dB at a matching thickness of only 1.885 *** cross-section calculations indicate that these MXene/Mo-metal sulfides have tremendous potential in practical military stealth *** work marks a departure from conventional component design limitations and presents a novel pathway for the creation of advanced MXene-based composites with potent EMW absorption capabilities.

关键词： Semiconductor-semiconductor-metal heterostructure Semiconductor junctions Mott-Schottky junctions Built-in electric field Electromagnetic wave absorption

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Energy-efficient buffer and service rate allocation in manufacturing systems using hybrid machine learning and evolutionary algorithms

引用

Advances in Manufacturing 2024年第2期12卷 227-251页

作者： Si-Xiao gao Hui Liu jun Ota Key Laboratory of Traffic Safety on Track of Ministry of Education Institute of Artificial Intelligence and Robotics(IAIR)School of Traffic and Transportation EngineeringCentral South UniversityChangsha410075People’s Republic of China Research into Artifacts Center for Engineering School of EngineeringThe University of TokyoTokyoJapan

Currently,simultaneous buffer and service rate allocation is a topic of interest in the optimization of manufacturing *** allocation problems have been solved previously to satisfy economic requirements;however,owing to the progress of green manufacturing,energy conservation and environmental protection have become increasingly ***,an energy-efficient approach is developed to maximize the throughput and minimize the energy consumption of manufacturing systems,subject to the total buffer capacity,total service rate,and predefined energy *** energy-efficient approach integrates the simulated annealing-non-dominated sorting genetic algorithm-II with the honey badger algorithm-histogram-based gradient boosting regression *** former algorithm searches for Pareto-optimal solutions of sufficient *** latter algorithm builds prediction models to rapidly calculate the throughput,energy consumption,and energy *** examples show that the proposed hybrid approach can achieve a better solution quality compared with previously reported ***,the prediction models can rapidly evaluate manufacturing systems with sufficient *** study benefits the multi-objective optimization of green manufacturing systems.

关键词： Energy-efficient allocation Multi-objective optimization Energy efficiency Energy consumption Machine learning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

核壳型磁载TiO_2/CoFe_2O_4光催化剂的制备与性能研究

引用

材料科学与工艺 2009年第5期17卷 691-695页

作者：黄英高俊宁西北工业大学理学院应用化学系西安710072

纳米TiO2是一种高效的光催化剂,为了解决TiO2纳米颗粒从悬浮体系中分离回收难的问题,可将其包覆于磁性微球之外,借助于磁场的作用实现快速有效地分离.以尖晶石型CoFe2O4为磁核,制备了核壳型纳米磁性TiO2/CoFe2O4光催化剂,通过水浴恒温... 详细信息

纳米TiO2是一种高效的光催化剂,为了解决TiO2纳米颗粒从悬浮体系中分离回收难的问题,可将其包覆于磁性微球之外,借助于磁场的作用实现快速有效地分离.以尖晶石型CoFe2O4为磁核,制备了核壳型纳米磁性TiO2/CoFe2O4光催化剂,通过水浴恒温条件、热处理温度的改变,以及工艺的调整优化了催化剂的制备工艺.采用XRD和TEM分析了催化剂的结构与形貌.研究发现,水浴90℃恒温2h、600℃热处理后的TiO2/CoFe2O4在降解TNT时表现出了较高的催化活性.表明合适的反应时间和热处理温度是影响催化剂活性的关键因素.

关键词：光催化剂核壳结构 TiO2/CoFe2O4 磁载光催化剂

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Exploration of cardiac rehabilitation nursing for elderly patients with myocardial infarction based on individualized cardiac rehabilitation

引用

World Journal of Clinical Cases 2024年第2期12卷 256-266页

作者： Hua-ning Liu Bo gao Department of Geriatrics General Hospital of the YangTze River ShippingWuhan Brain HospitalWuhan 430015Hubei ProvinceChina Department of Cardiology Suizhou Central HospitalAffiliated Hospital of Hubei University of MedicineSuizhou 441300Hubei ProvinceChina

BACKGROUND Myocardial infarction is a high-risk condition prevalent among the elderly population,often leading to adverse clinical manifestations such as reduced cardiopulmonary function,anxiety,and depression ***,cardiac rehabilitation holds immense importance in mitigating these *** To evaluate the effect of individualized cardiac rehabilitation on blood pressure variability(BPV)and baroreflex sensitivity(BRS)in elderly patients with myocardial *** A cohort of 74 elderly patients diagnosed with myocardial infarction and admitted to our hospital between January 2021 and January 2022 were subjected to random ***,all patients were divided into two groups,namely the research group(n=37)and the control group(n=37),utilizing the number table *** control group received conventional drug treatment and nursing guidance intervention,while the study group underwent individualized cardiac rehabilitation in addition to the interventions received by the control *** patients were continuously intervened for 12 wk,and the BPV of these two groups in the 1st wk(T0),the 4th wk(T1)and the 12th wk(T2)were compared,BRS,changes in cardiopulmonary function measures,and adverse cardiovascular *** Of 24 h diastolic BPV,24 h systolic BPV,carbon dioxide ventilation equivalent slope of the research group were lower than those of the control group at T1 and T2,BRS,peak heart rate and systolic blood pressure product,1 min heart rate recovery were higher than those of the control group,and the incidence of adverse events in the research group was lower than that of the control group,the difference was statistically significant(P<0.05).CONCLUSION In this study,we found that after individualized cardiac rehabilitation in elderly patients with myocardial infarction,BPV and BRS can be effectively improved,cardiac function is significantly enhanced,and a better prognosis is obtained.

关键词： Individualized cardiac rehabilitation Myocardial infarction Variability in blood pressure Baroreflex sensitivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Exhaust hood performance and its improvement technologies in industrial buildings:A literatu rereview

引用

Building Simulation 2024年第1期17卷 23-40页

作者： Jing Zhang Jian Wang jun gao Weimin Zhang Architectural Engineering Institute Jinhua PolytechnicJinhua 321017China Institute of HVAC Engineering Schoolof Mechanical EngineeringTongji UniversityShanghai 200092China Tongji Architectural Design(Group)Co .LtdShanghai 200092China

The pollutant control performance of exhaust hoods plays a crucial role in the indoor air quality and energy consumption of ventilation systems in industrial *** better understand the impact of local ventilation on the industrial indoor environment,this paper presents a literature review of exhaust hood performance and its improvement *** create an index for evaluating the performance of exhaust hoods,the capture velocity,capture efficiency,flow ratio of pollutant emissions and exhaust airflow and energy consumption are first introduced.A number of factors affecting exhaust hood performance are assessed such as hood type,hood opening size,exhaust rate,installation distance,pollution source emission and environmental *** to structural improvement methods,the use of active airflow is a more effective way to improve the exhaust hood *** most commonly used methods for determining the exhaust rate are the controlled speed method and the flow ratio *** use of an exhaust hood with an appropriate exhaust rate and jet parameters(for an active air-assisted hood)can effectively improve the pollutant control performance and reduce the energy consumption that would be wasted on the redundant exhaust *** more information focused on exhaust hood performance,this work suggests more effective strategies for improving indoor air quality and reducing energy consumption in industrial buildings.

关键词： industrial ventilation exhaust hood capture efficiency exhaust rate performance improvement

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hole cleaning evaluation and installation spacing optimization of cuttings bed remover in extended-reach drilling

引用

Petroleum Science 2024年第3期21卷 2005-2022页

作者： Shuo Peng Wen-jun Huang De-Li gao MOE Key Laboratory of Petroleum Engineering China University of Petroleum-BeijingBeijing102249China State Key Laboratory of Petroleum Resources and Engineering China University of Petroleum-BeijingBeijing102249China

In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the *** cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,and pipe stuck probably occur,which results in a lot of non-productive time and remedial *** bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring *** paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning ***,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation,and a new type of cuttings bed remover was ***,an evaluation method of hole cleaning effect of remover was *** that,the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid,rotational speed of drillpipe,rate of penetration,wellbore size,rheological property of drilling fluid,and remover eccentricity on the performance of cuttings bed remover were *** results demonstrate that the new type of remover with streamline blade performs better than conventional *** efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe,flow rate of drilling fluid,remover eccentricity,and 6 rpm Fann dial reading for drilling *** higher rate of penetration and large wellbore size result in worse hole *** findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.

关键词： Extended-reach drlling Drilling hydraulics Cuttings transport Hole cleaning Cuttings bed remover

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Extraction of Acoustic Normal Mode Depth Functions Using Range-Difference Method with Vertical Linear Array Data

引用

Journal of Ocean University of China 2024年第4期23卷 871-882页

作者： gao Siyu LI Weilu ZHANG Yinquan LI Xiaolei WANG ning College of Marine Technology Ocean University of ChinaQingdao 266100China National Marine Data and Information Service Tianjin 300171China

Data-derived normal mode extraction is an effective method for extracting normal mode depth functions in the absence of marine environmental ***,when the corresponding singular vectors become nonunique when two or more singular values obtained from the cross-spectral density matrix diagonalization are nearly equal,this results in unsatisfactory extraction outcomes for the normal mode depth *** address this issue,we introduced in this paper a range-difference singular value decomposition method for the extraction of normal mode depth *** performed the mode extraction by conducting singular value decomposition on the individual frequency components of the signal's cross-spectral density *** was achieved by using pressure and its range-difference matrices constructed from vertical line array *** proposed method was validated using simulated *** addition,modes were successfully extracted from ambient noise.

关键词： range difference depth function extraction normal mode

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：