检索结果-南通市图书馆

Microstructure and mechanical properties of double-side friction stir welded 6082Al ultra-thick plates

Journal of Materials Science & Technology 2020年第6期41卷 105-116页

作者： C.Yang J.F.zhang g.N.Ma L.H.Wu X.M.zhang g.z.he P.Xue D.R.Ni B.L.Xiao K.S.Wang z.Y.Ma Shenyang National Laboratory for Materials Science Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China CRRC Changchun Railway Vehicles Co. Ltd.Changchun 130062China School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China

In the present work,80 mm thick 6082Al alloy plates were successfully double-side welded by friction stir welding(FSW).The relationship between the microstructures and mechanical properties was built for the double-side FSW butt joint with more attention paid to the local characteristic *** was shown that a phenomenon of microstructural inhomogeneity existed in the nugget zone(Nz)through the thickness *** grain size presented an obvious gradient distribution from the top to the bottom for each single-pass weld,and the microhardness values decreased from both surfaces to the middle of the *** lowest hardness zone(LHz)exhibited a"hyperbolical"-shaped distribution extending to the middle of the *** tensile properties were obtained in the three sliced specimens of the FSW joint,and the joint coefficient reached about 70%which achieved the same level as the conventional FSW Al alloy *** element modeling proved that the"hyperbolical"-shaped heat affected zone(HAz)was beneficial to resisting the strain concentration in the middle layer specimen which helped to increase the tensile *** on the analysis of the hardness contour map,tensile property and microstructural evolution of the joints,an Isothermal Softening Layer(ISL)model was proposed and established,which may have a helpful guidance for the optimization on the FSW of ultra-thick Al alloy plates.

关键词： Ultra-thick aluminum alloy plates Double-side friction stir welding Finite element model Microstructural inhomogeneity Mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Nitrogen mineralization in the oldest climax communities in the eastern Mediterranean region

引用

Journal of Forestry Research 2024年第1期35卷 213-228页

作者： Fatma Selcen Sakar gürcan güleryüz Department of Biology Section Ecology GörükleGraduate School of Natural and Applied ScienceUniversity of Bursa Uludağ16059 NilüferBursaTurkey Department of Biology Section Ecology GörükleFaculty of Science and ArtsUniversity of Bursa Uludağ16059 NilüferBursaTurkey

In this study,we investigated how tree species affect N mineralization in connection to some soil properties and seconder metabolite levels of litter,in the soil of the old-est native forest *** the oldest pure communi-ties of Pinus nigra(PN),Fagus orientalis(FO),and Abies bornmuelleriana(AB)in the mountain range of Mount Uludağ,Bursa,Turkey,annual net yield and N mineraliza-tion in the 0-5-and 5-20-cm soil layers were determined in a field incubation study over 1 *** locations were chosen from 1300 to 1600 m a.s.l.,and moisture content(%),pH,water-holding capacity(%),organic C,total N,and C/N ratio,and annual net mineral N yield of the soil and hydro-lyzed tannic acid and total phenolic compounds in litter were compared for these forest *** had the highest annual net Nmin yield(43.9±4.8 kg ha^(-1) a^(-1)),*** the lowest(30.5±4.2 kg ha^(-1) a^(-1)).Our findings show that in the oldest forest ecosystems,the seasonal soil moisture content and tree species play an essential role in N cycling and that hydrolyzed tannic acids and total phenolic compounds effectively control N *** acid and total phenolics in the litter were found to inhibit nitrification,but total phenolics were found to stimulate ammonification.

关键词： Oldest forest communities Nitrogen mineralization Nitrification Tannic acid Total phenolic Litter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Distinct Electrical and Mechanical Responses of a Cu-10Fe Composite Prepared by Hot-Pressed Sintering and Post Treatment

引用

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 255-265页

作者： X.Y.Yue S.Y.Peng X.zhang C.N.he Y.z.Tian Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) School of Materials Science and EngineeringNortheastern UniversityShenyang110819China School of Materials Science and Engineering and Tianjin Key Laboratory of Composite and Functional Materials Tianjin UniversityTianjin300350China Research Centre for Metallic Wires Northeastern UniversityShenyang110819China

A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution *** hot-pressed sintered and solution treated materials were rolled and *** precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron *** contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe *** Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 *** for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were *** findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.

关键词： Cu-Fe composite Hot-pressed sintering Thermal stability Strength Electrical conductivity

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Esophageal inserted subclavian catheter:a rare complication

引用

World Journal of Emergency Medicine 2024年第3期15卷 243-245页

作者： DilberÜçöz Kocaşaban Sertaçgüler Emergency Medicine Clinic Health Sciences University Ankara Training and Research HospitalAnkara 06930Turkey

Central venous catheterization(CVC) is an invasive procedure for administering fluids,nutrients,and drugs;monitoring central venous pressure;performing pulmonary artery catheterization;and placing transvenous pacemakers in intensive care units and all specialties,from anesthesia to emergency medicine,for the treatment of trauma and hemodynamically unstable pediatric and adult patients.[1,2]Complications have been observed in more than 15% of patients who underwent ***,infectious,and thrombotic complications have been reported in 5%–19%,5%–26%,and 2%–26% of patients,respectively.[3] Malposition,on the other hand,is common in subclavian catheter insertion and is usually associated with an initially misplaced guidewire.[4]

关键词： unstable insertion initially

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A multi-sensor appiproach to calving detection

引用

Information Processing in Agriculture 2024年第1期11卷 45-64页

作者： Anita z.Chang David L.Swain Mark g.Trotter Institute for Future Farming Systems School of HealthMedicaland Applied SciencesCentral Queensland UniversityRockhamptonQueensland 4700Australia

The advent of remote livestock monitoring systems provides numerous possibilities for improving on-farm productivity,efficiency,and *** potential application for these systems is for the detection of calving *** study describes the integration of data from multiple sensor sources,including accelerometers,global navigation satellite systems(gNsS),an accelerometer-derived rumination algorithm,a walk-over-weigh unit,and a weather station for parturition detection using a support vector machine *** best performing model utilised data from gNsS,the ruminating algorithm,and weather stations to achieve 98.6%accuracy,with 88.5%sensitivity and 100%*** topranking features of this model were primarily gNSS *** study provides an overview as to how various sensor systems could be integrated on-farm to maximise calving detection for improved production and welfare outcomes.

关键词： Accelerometer gNSS gPS Rumination Sensor WOW

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Prediction of the undrained shear strength of remolded soil with non-linear regression,fuzzy logic,and artificial neural network

引用

Journal of Mountain Science 2024年第9期21卷 3108-3122页

作者： YÜNKÜL Kaan KARAÇOR Fatih gÜRBÜz Ayhan BUDAK TahsinÖmür Department of Civil Engineering Faculty of Engineering and ArchitectureTokat Gaziosmanpaşa UniversityTokat 60100Türkiye Department of Civil Engineering Faculty of Engineering and ArchitectureKafkas UniversityKars 36000Türkiye Department of Civil Engineering Faculty of EngineeringGazi UniversityAnkara 06570Türkiye Ministry of Youth and Sports Ankara 06090Türkiye

This study aims to predict the undrained shear strength of remolded soil samples using non-linear regression analyses,fuzzy logic,and artificial neural network modeling.A total of 1306 undrained shear strength results from 230 different remolded soil test settings reported in 21 publications were collected,utilizing six different measurement *** water content,plastic limit,and liquid limit were used as input parameters for fuzzy logic and artificial neural network modeling,liquidity index or water content ratio was considered as an input parameter for non-linear regression *** non-linear regression analyses,12 different regression equations were derived for the prediction of undrained shear strength of remolded ***-Forward backpropagation and the TANSIg transfer function were used for artificial neural network modeling,while the Mamdani inference system was preferred with trapezoidal and triangular membership functions for fuzzy logic *** experimental results of 914 tests were used for training of the artificial neural network models,196 for validation and 196 for *** was observed that the accuracy of the artificial neural network and fuzzy logic modeling was higher than that of the non-linear regression ***,a simple and reliable regression equation was proposed for assessments of undrained shear strength values with higher coefficients of determination.

关键词： Undrained shear strength Liquidity index Water content ratio Non-linear regression Artificial neural networks Fuzzy logic

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Solid-state Circuit Breaker Based on Cascaded Normally-on SiC JFETs for Medium-voltage DC Distribution Networks

引用

Protection and Control of Modern Power Systems 2024年第2期9卷 32-46页

作者： Dong he Haohui zhou zheng Lan Wei Wang Jinhui zeng Xueping Yu z.John Shen Chongqing University of Posts and Telecommunications ChongqingChina henan Polytechnic University JiaozuoChina College of Electrical and Information Engineering Hunan University of TechnologyZhuzhou 412007China Hunan University ChangshaChina College of Electrical and Information Engineering Hunan UniversityChangshaChina College of Electrical Engineering Three Gorges University Rensselaer Polytechnic Institute TroyNYUSA

Solid-state circuit breakers(SSCBs)are critical components in the protection of medium-voltage DC distribution networks to facilitate arc-free,fast and reliable isolation of DC ***,limited by the capacity of a single semiconductor device,using semi-conductor-based SSCBs at high voltage is *** study presents the details of a 1.5 kV,63 A medi-um-voltage SSCB,composed primarily of a solid-state switch based on three cascaded normally-on silicon car-bide(SiC)junction field-effect transistors(JFETs)and a low-cost programmable gate drive *** and static voltage sharing among the cascaded SiC JFETs of the SSCB during fault isolation is realized using the pro-posed gate drive *** selection conditions for the key parameters of the SSCB gate driver are also ***,an improved pulse-width modulation cur-rent-limiting protection solution is proposed to identify the permanent overcurrent and transient inrush current associated with capacitive load startup in a DC distribu-tion *** the developed SSCB prototype and the fault test system,experimental results are obtained to validate the fault response performance of the *** Terms—Solid-state circuit breaker,DC distribu-tion network,SiC JFET,voltage balancing,inrush current.

关键词： Solid-state circuit breaker DC distribu-tion network SiC JFET voltage balancing inrush current

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Effect of Al_(2)O_(3)on the Mechanical Properties of(B_(4)C+Al_(2)O_(3))/Al Neutron Absorbing Materials

引用

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1411-1420页

作者： J.X.Cai B.M.Shi N.Li Y.Liu z.g.zhang Y.N.zan Q.z.Wang B.L.Xiao z.Y.Ma Shi‑Changxu Innovation Center for Advanced Materials Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal ResearchChinese Academy of SciencesShenyang 110016China Nuclear Equipment Division Beijing Institute of Nuclear EngineeringChina Nuclear Power Engineering Co.Ltd.Beijing 100840China Department of Materials Science School of Mechanical EngineeringShenyang UniversityShenyang 110044China

B_(4)C/Al composites are widely utilized as neutron absorbing materials for the storage and transportation of spent nuclear *** order to improve the high-temperature mechanical properties of B_(4)C/Al composites,in-situ nano-Al_(2)O_(3)was introduced utilizing oxide on Al powder *** this study,the Al_(2)O_(3)content was adjusted by utilizing spheroid Al powder with varying diameters,thereby investigating the impact of Al_(2)O_(3)content on the tensile properties of(B_(4)C+Al_(2)O_(3))/Al *** was found that the pinning effect of Al_(2)O_(3)on the grain boundaries could hinder the recovery of dislocations and lead to dislocation accumulation at high *** the result,with the increase in Al_(2)O_(3)content and the decrease in grain size,the high-temperature strength of the composites increased *** finest Al powder used in this investigation had a diameter of 1.4μm,whereas the resultant composite exhibited a maximum strength of 251 MPa at room temperature and 133 MPa at 350℃,surpassing that of traditional B_(4)C/Al composites.

关键词： Al matrix composites Neutron absorbing materials (B_(4)C+Al_(2)O_(3))/Al composites High-temperature strength

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Remodeling Tumor Immune Microenvironment by Using Polymer-Lipid-Manganese Dioxide Nanoparticles with Radiation Therapy to Boost Immune Response of Castration-Resistant Prostate Cancer

引用

Research 2024年第3期2023卷 83-96页

作者： Abdulmottaleb E.zetrini HoYin Lip Azhar z.Abbasi Ibrahim Alradwan Taksim Ahmed Chunsheng he Jeffrey T.henderson Andrew M.Rauth Xiao Yu Wu Advanced Pharmaceutics and Drug Delivery Laboratory Leslie Dan Faculty of PharmacyUniversity of TorontoM5S 3M2TorontoONCanada. Departments of Medical Biophysics and Radiation Oncology University of TorontoM5G 1L7TorontoONCanada.

Despite substantial progress in the treatment of castration-resistant prostate cancer (CRPC), including radiation therapy and immunotherapy alone or in combination, the response to treatment remains poor due to the hypoxic and immunosuppressive nature of the tumor microenvironment. herein, we exploited the bioreactivity of novel polymer–lipid manganese dioxide nanoparticles (PLMDs) to remodel the tumor immune microenvironment (TIME) by increasing the local oxygen levels and extracellular pH and enhancing radiation-induced immunogenic cell death. This study demonstrated that PLMD treatment sensitized hypoxic human and murine CRPC cells to radiation, significantly increasing radiation-induced DNA double-strand breaks and ultimately cell death, which enhanced the secretion of damage-associated molecular patterns, attributable to the induction of autophagy and endoplasmic reticulum stress. Reoxygenation via PLMDs also polarized hypoxic murine RAW264.7 macrophages toward the M1 phenotype, enhancing tumor necrosis factor alpha release, and thus reducing the viability of murine CRPC TRAMP-C2 cells. In a syngeneic TRAMP-C2 tumor model, intravenous injection of PLMDs suppressed, while radiation alone enhanced recruitment of regulatory T cells and myeloid-derived suppressor cells. Pretreatment with PLMDs followed by radiation down-regulated programmed death-ligand 1 and promoted the infiltration of antitumor CD8+ T cells and M1 macrophages to tumor sites. Taken together, TIME modulation by PLMDs plus radiation profoundly delayed tumor growth and prolonged median survival compared with radiation alone. These results suggest that PLMDs plus radiation is a promising treatment modality for improving therapeutic efficacy in radioresistant and immunosuppressive solid tumors.

关键词： RAW264.7 alone treatment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Construction of 2D/2D Ti_(3)C_(2)T_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

引用

Journal of Materials Science & Technology 2024年第4期171卷 1-9页

作者： T.Y.Huang z.Yang S.Y.Yang z.H.Dai Y.J.Liu J.H.Liao g.Y.zhong z.J.Xie Y.P.Fang S.S.zhang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy Technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

The insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable Ti_(3)C_(2)T_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： Two-dimensional structure heterostructure Photothermal effect Photocatalyst Hydrogen evolution

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：