检索结果-南通市图书馆

Optimization of chemistry and process parameters for control of intermetallic formation in Mg sludges

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第4期12卷 1431-1448页

作者： Y.Fu g.g.Wang A.hu Y.Li k.B.Thacker J.P.Weiler H.hu Department of Mechanical Automotive and Materials EngineeringUniversity of Windsor401 Sunset AveWindsorOntario N9B 3P4Canada global Technology Centre Meridian Lightweight Technologies25 MacNab AveStrathroyOntario N7G 4H6Canada

Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important ***,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die *** aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process *** Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn *** design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding *** sludge yield(SY)and intermetallic size(IS)was selected as two *** optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,*** best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,*** groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg *** CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental *** Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed *** Physical Sludge Factor could be used f

关键词： Magnesium sludge Al-Mn intermetallic Optimization Taguchi method Sludge factor Chemical composition Process parameter

在线全文

学校读者我要写书评

暂无评论

自由表面对夹杂材料应力分布的影响

复合材料学报 1998年第3期15卷 108-112页

作者：黄国良胡更开白晋波北京理工大学应用力学系法国巴黎中央工程师学院材料实验室

本文利用Ｅｓｈｅｌｂｙ夹杂理论，给出了定量分析自由表面对单球形夹杂材料应力分布影响的一种解析模型，并利用所得的结果进一步讨论了自由表面对夹杂材料残余应力分布及表面裂纹形成的影响。

关键词：复合材料自由表面残余应力夹层材料应力分布

Safe formation control of multiple unmanned aerial vehicles:control design and safety-stability analysis

在线全文

学校读者我要写书评

暂无评论

Control Theory and Technology 2024年第3期22卷 442-454页

作者： Haoqi Li Jiangping hu Qingrui Zhou Bijoy k.ghosh School of Automation Engineering University of Electronic Science and Technology of ChinaChengdu 611731SichuanChina Yangtze Delta Region Institute(huzhou) University of Electronic Science and Technology of ChinaHuzhou 313000ZhejiangChina Qian Xuesen Laboratory of Space Technology China Academy of Space TechnologyBeijing 100094China Department of Mathematics and Statistics Texas Tech UniversityLubbockTX 79409-1042USA

Both safety and stability are primary performance criteria for multi-unmanned aerial vehicle(multi-UAV)systems in many coordination *** approaches often consider safety and stability *** is necessary and urgent to develop a safety-stability control strategy to merge these two performance *** this paper,a unified approach is developed to consider safety and stability for multi-UAV formation *** stability criterion is represented by a Lyapunov function and safety criterion is represented by a barrier function and then a relaxed converse control Lyapunov-barrier theorem is *** the help of a relaxed converse control Lyapunov-barrier function(RCCLBF),a distributed safety-stability formation control strategy is proposed for the multi-UAV *** transforming the solution of RCCLBF to a Lyapunovlike stabilization problem,we show that the proposed formation control strategy can drive the UAVs staying within a specified safe *** results are provided to validate the proposed safety-stability formation control strategy.

关键词： Multi-UAV system Formation control Lyapunov function Barrier function Stability with safety guarantee

PERSPECTIVES IN MECHANICS OF HETEROgENEOUS SOLIDS

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2011年第1期24卷 1-26页

作者： C.Q. Chen J.Z. Cui H.L. Duan X.Q. Feng L.H. He g.k. hu M.J. huang Y.Z. huo B.H. Ji B. Liu X.H. Peng H.J. Shi Q.P. Sun J.X. Wang Y.S. Wang H.P. Zhao Y.P. Zhao Q.S. Zheng W.N. Zou Department of Engineering Mechanics AML Tsinghua University Beijing 100084 China Academy of Mathematics and Systems Sciences Chinese Academy of Sciences Beijing 100190 China State key Laboratory for Turbulence and Complex System and Department of Mechanics and Aerospace Engineering College of Engineering Peking University Beijing 100871 China CAS key Laboratory of Mechanical Behavior and Design of Materials University of Science and Technology of China Hefei Anhui 230026 China School of Aerospace Engineering Beijing Institute of Technology Beijing 100081 China Institute for Advanced Study Nanchang University Nanchang 330031 China Depariment of Mechanics and Engineering Sciences Fudan University 220 Handa Road Shanghai 200433 China Department of Mechanical Engineering Hong Kong University of Science and Technology Hong KongChina Department of Mechanical Engineering Hong Kong University of Science and Technology Hong Kong China Institute of Engineering Mechanics Beijing Jiaotong University Beijing 100044 China State key Laboratory of Nonlinear Mechanics Institute of Mechanics Chinese Academy of Sciences Beijing 100190 China

The Micro- and Nano-mechanics Working group of the Chinese Society of Theoretical and Applied Mechanics organized a forum to discuss the perspectives, trends, and directions in mechanics of heterogeneous materials in January 2010. The international journal, Acta Mechanica Solida Sinica, is de- voted to all fields of solid mechanics and relevant disciplines in science, technology, and engineering, with a balanced coverage on analytical, experimental, numerical and applied investigations. On the occasion of the 30TM anniversary of Acta Mechanica Solida Sinica, its editor-in-chief, Professor Q.S. Zheng invited some of the forum participants to review the state-of-the-art of mechanics of heterogeneous solids, with a particular emphasis on the recent research development results of Chinese scientists. Their reviews are organized into five research areas as reported in different sections of this paper. ~I firstly brings in fo- cus on micro- and nano-mechanics, with regards to several selective topics, including multiscale coupled models and computational methods, nanocrystal superlattices, surface effects, micromechanical damage mechanics, and microstructural evolution of metals and shape memory alloys. ~II shows discussions on multifield coupled mechanical phenomena, e.g., multi-fields actuations of liquid crystal polymer networks, mechanical behavior of materials under radiations, and micromechanics of heterogeneous materials. In ~III, we mainly address the multiscale mechanics of biological nanocomposites, biological adhesive surface mechanics, wetting and dewetting phenomena on microstructured solid surfaces. The phononic crystals and manipulation of elastic waves were elaborated in ~IV. Finally, we conclude with a series of perspectives on solid mechanics. This review will set a primary goal of future science research and engineering application on solid mechanics with the effort of social and economic development.

关键词： heterogeneous materials smart materials biological materials multiscale mechanics micro- and nano-mechanics damage and fracture constitutive relation elastic wave surface effects

R-matrix for the 8-Dimensional Spin Representation of Uq(so7)

在线全文

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第2期40卷 485-497页

作者： Hong Mei hu Nai Hong hu School of Mathematical Sciences Suzhou University of Science and TechnologySuzhou 215009P.R.China School of Mathematical Sciences MOE Key Laboratory of Mathematics and Engineering Applications&Shanghai Key Laboratory of PMMPEast China Normal UniversityShanghai 200241P.R.China

The purpose of the paper is to describe the solution to the quantum Yang-Baxter equation associated with the 8-dimensional spin representation Tsp of Uq(so7).The self-duality of Tsp and the symmetry of the corresponding braiding matrix are ***,the minimal polynomial of the braiding R-matrix of Tsp is presented explicitly in an ingenious method by taking advantage of nice features of the spin representation Tsp.

关键词： Braiding R-matrix spin module minimal polynomial

Mapping out the reaction network of humin formation at the initial stage of fructose dehydration in water

在线全文

学校读者我要写书评

暂无评论

green Energy & Environment 2024年第6期9卷 1016-1026页

作者： Xing Fu Yexin hu Ping hu hui Li Shuguang Xu Liangfang Zhu Changwei hu key Laboratory of green Chemistry and Technology Ministry of EducationCollege of ChemistrySichuan UniversityChengduSichuan610064China State key Laboratory of Southwestern Chinese Medicine Resources Innovative Institute of Chinese Medicine and PharmacyChengdu University of Traditional Chinese MedicineChengduSichuan611137China

The formation of humins hampers the large-scale production of 5-hydroxymethylfurfural(HMF)in ***,a detailed reaction network of humin formation at the initial stage of fructose-to-HMF dehydration in water is delineated by combined experimental,spectroscopic,and theoretical *** bimolecular reaction pathways to build up soluble humins are *** is,the intermolecular etherification of β-furanose at room temperature initiates the C12 path,whereas the C-C cleavage of a-furanose at 130-150℃ leads to C11 path,and that of open-chain fructose at 180℃ to C11' *** successive intramolecular dehydrations and condensations of the as-formed bimolecular intermediates lead to three types of soluble *** show that the C12 path could be restrained by using HCl or AlCl_(3) catalyst,and both the C12 and C110 paths could be effectively inhibited by adding THF as a co-solvent or accelerating heating rate via microwave heating.

关键词： Carbohydrates 5-hydroxymethylfurfural Reaction network Soluble humins Tautomer

Investigation of mechanical and electrical characteristics of selfsensing pneumatic torsional actuators

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第1期67卷 130-142页

作者： XIAO Wei hu DeAn hu guoLiang XIAO Yihua key Laboratory of Conveyance and Equipment Ministry of EducationEast China Jiaotong UniversityNanchang 330013China key Laboratory of Advanced Design and Simulation Techniques for Special Equipment Ministry of EducationHunan UniversityChangsha 410082China

Soft pneumatic actuators are one of the most promising actuation for soft robots,and great achievements have been *** it remains challenging to endow sensing capabilities to pneumatic actuators,especially for the sensing ability originating directly from the actuator ***,a self-sensing pneumatic torsional actuator(SPTA)is designed based on the electromagnetic induction effect and magnetically responsive *** SPTA can generate feedback voltage and current with the deformation,in which the sensing function comes from its inherent *** investigate the mechanical and electrical characteristics,an experimental platform and a finite element model are established,*** find that the torsion angle and output torque increase in nonlinear with the actuating *** maximum torsion angle is 66.35°,which is 84.34%of that for the actuator fabricated by pure *** maximum output torque(24.9 N mm)improves by 23.19%compared with the actuator made by pure *** regards the electrical characteristics,the maximum feedback voltage and current are 2.90μV and 29.50 nA when the SPTA is actuated by a pressure of−40 *** also demonstrate that the relationship between the torsion angle and the magnetic flux change is approximately ***,the number of turns of wires,magnetic powders contents,and magnetic direction on the feedback voltage and current are *** show that the feedback voltage and current can be enhanced by increasing the number of turns and magnetic powders *** envision that the SPTA would be promising for soft robots to realize their accuracy control and intelligentization.

关键词： pneumatic torsional actuators self-sensing feedback voltage finite element modeling soft robots

Effect of CO_(2) Opposing Multiple Jets on Thermoacoustic Instability and NO_(x) Emissions in a Lean-Premixed Model Combustor

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第1期33卷 207-221页

作者： ZHOU Hao hu Liubin Institute for Thermal Power Engineering State Key Laboratory of Clean Energy UtilizationZhejiang UniversityHangzhou 310027China

This paper experimentally studied the effect of CO_(2) opposing multiple jets on the thermoacoustic instability and NO_(x) emissions in a lean-premixed model *** feasibility was verified from three variables:the CO_(2) jet flow rate,hole numbers,and hole diameters of the *** indicate that the control effect of thermoacoustic instability and NO_x emissions show a reverse trend with the increase of open area ratio on the whole,and the optimal jet flow rate range is 1-4 L/min with CO_(2) opposing multiple *** this flow rate range,the amplitude and frequency of the dynamic pressure and heat release signals CH~* basically decrease as the CO_(2) flow rate increases,which avoids high-frequency and high-amplitude thermoacoustic *** amplitude-damped ratio of dynamic pressure and CH*can reach as high as 98.75% and 93.64% with an optimal open area ratio of 3.72%.NO_(x) emissions also decrease as the jet flow rate increases,and the maximum suppression ratio can reach 68.14%.Besides,the flame shape changes from a steep inverted "V" to a more flat "M",and the flame length will become shorter with CO_(2) opposing multiple *** research achieved the synchronous control of thermoacoustic instability and NO_(x) emissions,which could be a design reference for constructing a safer and cleaner combustor.

关键词： thermoacoustic instability lean-premixed model combustor CO_(2)opposing multiple jets open area ratio NO_(x)emissions

Multi-Axis Attention With Convolution Parallel Block for Organoid Segmentation

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第5期11卷 1295-1297页

作者： Pengwei hu Xun Deng Feng Tan Lun hu Xinjiang Technical Institute of Physics and Chemistry Chinese Academy of SciencesUrumqi 830011 University of Chinese Academy of Sciences Beijing 100049 Xinjiang Laboratory of Minority Speech and Language Information Processing Urumqi 830011China Merck kgaA Darmstadt 64293Germany

Dear Editor,This letter presents an organoid segmentation model based on multi-axis attention with convolution parallel *** adeptly captures dynamic dependencies within bright-field microscopy images,improving global ... 详细信息

关键词： letter convolution organo