检索结果-南通市图书馆

Effect of interface behaviour on damage and instability of PBX under combined tension-shear loading

Defence Technology（防务技术） 2023年第5期23卷 137-151页

作者： Quan-zhi Xia Yan-qing Wu feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081PR China

To study the effect of interface behaviour on the mechanical properties and damage evolution of PBX under combined tension-shear loading, the present work establishes the numerical model of a PBX three-phase hybrid system, which introduces a nonlinear plastic damage cohesion model to study the mechanical response and damage process. The parameters in the model were fitted and calibrated.Taking the crack growth rate as the feature, the damage state in each stage was determined, and the damage instability criterion was given. The effects of interfacial tensile strength and shear strength on the damage process of PBX were studied. On this basis, serrated and hemispherical structures interface of PBX has been developed, which affects the damage process and instability during the loading process.The results indicate that damage state response of PBX experiences the process of stable load bearing,unstable propagation, and complete failure. At the critical moment of instability, the overall equivalent effective strain of material reaches 3024 με and instability loading displacement reaches 0.39 mm. The increase of interfacial tensile strength and shear strength significantly inhibits the damage of PBX. The effect of interfacial shear strength on critical instability of PBX is approximately 1.7 times that of the interfacial tensile strength. Further, interface opening along the normal direction is the main damage form at the interface. Serrated and hemispherical rough interfaces can significantly inhibit propagation of cracks, and the load bearing capacity is improved by 22% and 9.7%, respectively. Appropriate improvement of the roughness of the interface structure can effectively improve the mechanical properties. It is significantly important to have a better understanding of deformation, damage and failure mechanisms of PBX and to improve our predictive ability.

关键词： PBX explosives Interface behaviour Damage Instability Crack propagation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Modification of SDOF model for reinforced concrete beams under close-in explosion

引用

Defence Technology（防务技术） 2023年第2期20卷 162-186页

作者： Wei Wei Yu-lei Zhang Jian-jun Su Yan Liu feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081China Xi'an Modern Chemistry Research Institute Xi'an710065China

In this paper,a modified single-degree-of-freedom(SDOF)model of reinforced concrete(RC)beams under close-in explosion is proposed by developing the specific impulse equivalent method and flexural resistance calculation method.The equivalent uniform specific impulse was obtained based on the local conservation of momentum and global conservation of kinetic energy.Additionally,the influence of load uniformity,boundary condition and complex material behaviors(e.***.strain rate effect,hardening/softening and hoop-confined effect)was considered in the resistance calculation process by establishing a novel relationship between external force,bending moment,curvature and deflection successively.The accuracy of the proposed model was verified by carrying out field explosion tests on four RC beams with the scaled distances of 0.5 m/kg~(1/3)and 0.75 m/kg~(1/3).The test data in other literatures were also used for validation.As a result,the equivalent load implies that the blast load near the mid-span of beams would contribute more to the maximum displacement,which was also observed in the tests.Moreover,both the resistance model and test results declare that when the blast load becomes more concentrated,the ultimate resistance would become lower,and the compressive concrete would be more prone to softening and crushing.Finally,based on the modified SDOF model,the calculated maximum displacements agreed well with the test data in this paper and other literatures.This work fully proves the rationality of the modified SDOF method,which will contribute to a more accurate damage assessment of RC structures under close-in explosion.

关键词： SDOF model Close-in explosion Specific impulse equivalent method Flexural resistance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Numerical simulation of drop weight impact sensitivity evaluation criteria for pressed PBXs

引用

Defence Technology（防务技术） 2023年第1期19卷 76-90页

作者： Hong-zheng Duan Yan-qing Wu Kun Yang feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081PR China

A thorough understanding of drop-weight impacted responses for polymer-bonded explosives(PBXs)is significant to evaluate their impact sensitivity.The characteristics of the drop-weight impacted pressed PBXs including deforming,fracturing,forming a local high-temperature region and igniting,were simulated using a coupled mechanical-thermo-chemical model integrating micro-defects evolution.A novel evaluation method for impact sensitivity is established using the relation between the input kinetic energy and the output energy due to deformation,crushing energy,local hot spot energy and ignition.The effects of impact velocity on sensitivity were analyzed and the critical local ignition impact velocity is determined as 4.0-4.5 m/s.The simulated results show that shear-crack friction heating is the dominant ignition mechanism.The region along the boundary of PBXs sample is the most hazardous regions where ignition first occur.The propagation of stress wave in PBXs causes shear-crack hotspot and bulk temperature exhibiting an approximate 45°direction evolution path,which is the main reason that dominated damage-ignition region transits from the boundary to the central of sample.

关键词： Polymer-bonded explosives(PBXs) Drop weight impact Numerical simulation Sensitivity evaluation criterion Hotspot mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Damage-ignition mechanism studies on modified propellant with different crosslinking density under dynamic loading

引用

Defence Technology（防务技术） 2023年第10期28卷 155-164页

作者： Hong-zheng Duan Yan-qing Wu Xiao Hou Kun Yang feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081PR China School of Aerospace Engineering Beijing Institute of TechnologyBeijing100081PR China The Fourth Institute of China Aerospace Science and Technology Corporation Xi'an710025PR China

The study of high-energy and low-vulnerability propellants is important for the power performance and safety of solid propellant rocket motors.The modified split Hopkinson pressure bar(SHPB)tests are performed on two kinds of propellant with different crosslinking density to study the dynamic mechanical responses and damage-ignition mechanism.SHPB apparatus is equipped with a highperformance infrared camera and high-speed camera to capture the deformation,damage-ignition feature and temperature evolution images in the impact process.The results suggested that the mechanical responses and damage-ignition mechanism of the propellants were affected by the strain rates and crosslinking density.The damage-ignition degree is more intense and the reaction occurs earlier with the increase of strain rates.For propellant 1 with higher crosslinking density,the critical ignition strain rate is 4500 s^(-1).Two kinds of propellants show different ignition mechanism,i.***.crack generation,propagation and final fracture for propellant 1 while viscous shear flow for propellant 2.Meanwhile,the SEM images also reveal the difference of damage-ignition mechanism of the two kinds of propellants.Finally,the ignition mechanism under different strain rates and critical ignition strain rate of propellants are further explained by the theoretical calculation of temperature variations.

关键词： The modified propellants Dynamic loading Mechanical property Damage-ignition mechanism Experimental and theoretical calculation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Shock response of cyclotetramethylene tetranitramine(HMX)single crystal at elevated temperatures

引用

Defence Technology（防务技术） 2023年第3期21卷 147-163页

作者： Kai Ding Xin-Jie Wang Zhuo-Ping Duan Yan-Qing Wu feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081PR China

To investigate the shock response of cyclotetramethylene tetranitramine(HMX)single crystals at elevated temperatures(below the phase transition point),plate impact experiments at elevated temperatures were designed and conducted.The HMX/window interface particle velocities at temperatures of 300 K,373 K,and 423 K were measured by the velocity interferometry system for any reflector(VISAR)technique.To further analyze the related mesoscale deformation mechanisms,a nonlinear thermoelastic-viscoplastic model was developed,which considers thermal activation and phonon drag dislocation slip mechanisms.The proposed model could well reproduce the measured thermal hardening behavior of Hugoniot elastic limit(HEL)of HMX single crystals.At elevated temperatures,the reduced dislocation mobility was observed,which stems from both phonon scattering and radiative damping effects.Comparatively speaking,radiative damping contributes less than phonon scattering to thermal hardening behavior.The calibrated model was further used to predict shock response of HMX single crystals with different thicknesses at different initial temperatures.Both the stress relaxation and elastic precursor decrease with thickness are mainly due to the rapid dislocation generation.These insights shed light on the interplay between dislocation motion and dislocation generation in thermal hardening behavior,stress relaxation,and elastic precursor decay,which serves to reveal the mesoscale deformation mechanisms at elevated temperatures.

关键词： deformation elevated dislocation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A new Ignition-Growth reaction rate model for shock initiation

引用

Defence Technology（防务技术） 2023年第5期23卷 126-136页

作者： Yang Yang Zhuo-ping Duan Shu-rui Li Lian-sheng Zhang feng-lei huang Yong Han Hui huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081China Institute of Chemical Materials China Academy of Engineering PhysicsMianyangSichuan621900China Institute of Fluid Physics China Academy of Engineering PhysicsMianyangSichuan621900China

Accurately predicting reactive flow is a challenge when characterizing an explosive under external shock stimuli as the shock initiation time is on the order of a microsecond.The present study constructs a new Ignition-Growth reaction rate model,which can describe the shock initiation processes of explosives with different initial densities,particle sizes and loading pressures by only one set of model parameters.Compared with the Lee-Tarver reaction rate model,the new Ignition-Growth reaction rate model describes better the shock initiation process of explosives and requires fewer model parameters.Moreover,the shock initiation of a 2,4-Dinitroanisole(DNAN)-based melt-cast explosive RDA-2(DNAN/HMX(octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazoncine)/aluminum)are investigated both experimentally and numerically.A series of shock initiation experiments is performed with manganin piezoresistive pressure gauges and corresponding numerical simulations are carried out with the new Ignition-Growth reaction rate model.The RDA-2 explosive is found to have higher critical initiation pressure and lower shock sensitivity than traditional explosives(such as the Comp.B explosive).The calibrated reaction rate model parameters of RDA-2 could provide numerical basis for its further application.

关键词： Shock initiation Ignition-growth reaction rate model Manganin pressure gauge Insensitive explosive DNAN-Based melt-cast explosive

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

引用

Defence Technology（防务技术） 2022年第11期18卷 1979-1999页

作者： Hong-fu Wang Yan Liu Fan Bai Jun-bo Yan Xu Li feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing401120China

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum(Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed,and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction(diffusion and kinetic) between the Al powder and the detonation products;the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.

关键词： Aluminized explosives Cylinder experiments Quasi-isentropic model Characteristic line analysis Reaction degree of Al powder Physical parameters of detonation products

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Combustion crack-network reaction evolution model for highly-confined explosives

引用

Defence Technology（防务技术） 2023年第8期26卷 54-67页

作者： Zhuo-ping Duan Meng-Jing Bai Zhi-ling Bai Xin-jie Wang feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijing100081China

The evolution behavior of combustion crack reaction of highly confined solid explosives after non-shock ignition is governed by multiple dynamic processes,including intrinsic combustion of explosives,crack propagation,and rapid growth of combustion surface area.Here,the pressure increase can accelerate the combustion rate of explosives,and the crack propagation can enlarge the combustion surface area.The coupling between these two effects leads to the self-enhanced combustion of explosive charge system,which is the key mechanism for the reaction development after ignition.In this study,combustion cracknetwork(CCN) model is established to describe the evolution of combustion crack reaction of highly confined solid explosives after non-shock ignition and quantify the reaction violence.The feasibility of the model is verified by comparing the computational and experimental results.The results reveal that an increase in charge structure size causes an increase in the time of crack pressurization and extension of cracks due to the high temperature-generated gas flow and surface combustion during the initial stage of explosive reaction,but when the casing is fractured,the larger the charge structure,the more violent the late reaction and the larger the charge reaction degree.The input pressure has no obvious influence on the final reaction violence.Further,a larger venting hole area leads to better pressure relief effect,which causes slower pressure growth inside casing.Larger reserved ullage volume causes longer lowpressure induction stage,which further restrains the internal pressure growth.Furthermore,the stronger the casing constraint,the more rapid the self-enhanced combustion of the high temperaturegenerated gas,which results in more violent charge reaction and larger charge reaction degree during casing break.Overall,the proposed model can clarify the effects of intrinsic combustion rate of explosives,charge structure size,input pressure,relief area,ullage volume,and constraint strength on the reaction evolution

关键词： Solid explosives Non-shock ignition Self-enhanced combustion Combustion crack-network(CCN)model Relief area Reaction degree

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermal hazard assessment of TKX-50-based melt-cast explosive

引用

Defence Technology（防务技术） 2022年第9期18卷 1546-1551页

作者： Jun-feng Wang Shu-sen Chen Shao-hua Jin Qing-hai Shu feng-lei huang Jian Ruan Xiao Ma Kun Chen School of Materials Science and Engineering Beijing Institute of TechnologyBeijingChina State Key Laboratory of Explosion Science and Technology Beijing Institute of TechnologyBeijingChina Gansu Yinguang Chemical Industry Group Co.Ltd BaiyinChina

In the present study, thermal hazards of TNT and DNAN used as the molten binder in TKX-50-based meltcast explosives were comparatively studied through accelerating rate calorimeter(ARC) and Cook-off experiments. Two kinds of ARC operation modes were performed to investigate the thermal safety performance under adiabatic conditions(HWS mode) and constant heating(CHR mode). The obtained results demonstrated that at both heating modes, DNAN/TKX-50 outperformed TNT/TKX-50 from the thermal safety point of view. However, the sensitivity to heat of the samples was reverse because of the different heating modes. In addition, the results of thermal hazard assessment obtained from the cookoff experiment complied with ARC analysis which indicated the molten binder TNT replaced by DNAN would reduce the hazard of the TKX-50 melt cast explosive. Furthermore, the results of cook-off experiments also showed that DNAN/TKX-50 outperformed TNT/TKX-50 from the aspect of thermal stability, which was consistent with the result of CHR mode because of the similar heating process.

关键词： Dihydroxylammonium 5,5’-bistetrazole-1,1’-diolate(TKX-50) 2,4-Dinitroanisole(DNAN) Thermal safety performance Accelerating rate calorimeter(ARC) Cook-off

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Behavior of reinforced concrete beams and columns subjected to blast loading

引用

Defence Technology（防务技术） 2018年第5期14卷 550-559页

作者： Yan Liu Jun-bo Yan feng-lei huang State Key Laboratory of Explosion Science and Technology Beijing Institute of Technology

In this study, the blast performance of steel reinforced concrete(RC) beams was experimentally and analytically investigated. The experiment consists of a total of 10 one-half-scale beams subjected to different levels of blast loading using live explosives. The reflected pressure-time histories were recorded and different damage levels and modes were observed. The blast resilience of the damaged beams was quantified by measuring the time-dependent displacements. Experiment results show that the damage in steel reinforced concrete beams with higher explosive mass is enhanced compared with that of the beams with smaller explosive mass at the same scaled distance. Based on the experiment data, an empirical expression is developed via dimensional analysis to correct the relationship between the midspan displacement and scaled distance. Besides, a complex single degree of freedom model(SDOF)incorporating complex features of the material behavior, high strain-rate effect and the column geometry was proposed and validated by test results.

关键词： Blast Steel reinforced concrete beams Dynamic response Scaling SDOF

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：