检索结果-南通市图书馆

Study of the Relative Variations of the Thermal Properties and Crystallinity of Blends (PP/EPR)/Calcium Carbonate

Modeling and Numerical Simulation of Material Science 2021年第1期11卷 19-33页

作者： Pierre Marcel Anicet Noah fabien betene ebanda Louis-Max Ayina Ohandja Ateba Atangana Laboratory of Mechanics ENSET University of Douala Douala Cameroon Department of Mechanical Engineering ENSET University of Douala Douala Cameroon

The objective of this paper is to investigate the relative variations of the constants of the thermal properties and the degree of crystallinity of the mixtures (PP/EPR)/Calcium carbonates elaborated with the Micro Bivis. We have strengthened the basic copolymer PP/EPR of a low level (5%) by three calcium carbonates models socal312, socal322v, Winnofil spm. We then subjected the different mixtures obtained, two cycles of a thermal loading under differential scanning calorimetry DSC. We finally focused on the thermal properties of isotactic polypropylene (TfP, TcP, ΔHfP, ΔHcP) and we calculated the degree of crystallinity of the mixtures. Reducing the energy cost of implementing mixtures is one of the objectives of this work. We quantified the relative variations of the above properties with those of the base copolymer. It shows that at a low loading rate of calcium carbonate, there is a decrease in the enthalpies of crystallization during the second exothermic cycle, with values that can reach 5.53 J/gPP for the basic copolymer PP/EPR. During the second endothermic cycle, there is an overall increase in isotactic polypropylene melting temperature values for all the blends as well as for the basic copolymer PP/EPR. There is evidence that calcium carbonates are useful for lowering the melting energy of isotactic polypropylene, even at a low loading rate for the majority. The number of endothermic cycles accentuates this phenomenon which is linked to the presence in our composites, of a so-called confined amorphous phase.

关键词： DSC PP/EPR CaCO3 Crystallinity Micro Bivis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Implementation and Evaluation of Certain Properties of a Polymer Matrix Composite Material Reinforced by Fibrous Residues of Saccharum officinarumin View of an Applicability Orientation

引用

Journal of Minerals and Materials Characterization and Engineering 2021年第2期9卷 206-225页

作者： Marie Josette Ndengue Merlin Zacharie Ayissi Pierre Marcel Anicet Noah fabien betene ebanda Atangana Ateba Department of Mechanical Engineering ENSET University of Douala Douala Cameroon Laboratory of Mechanics University of Douala Douala Cameroon Laboratory of Energy Materials Modelisation and Method University of Douala Douala Cameroon National Higher Polytechnic School University of Douala Douala Cameroon

This study examines the implementation and characterization of a polymer matrix composite material reinforced by sugarcane residues. The aim of the study is to enhance the abundantly produced sugarcane bagasse in the form of residues in the processing plants of said sugar cane. The composite material developed takes into account the size parameters and mass load rate of the reinforcement, the variations of which are between 2.5 mm and 4 mm respectively for the first parameter and 10% to 25% for the second. The load on the test tube during the test has a random orientation. The composite is polyester matrix. The cold compression moulding technique was used in the production of the various samples. Physical properties such as the rate of water absorption and the density of the composite are assessed. The three-point bending tests are carried out with the aim of inducing Young’s modulus from the elaborate samples. Analysis of physical properties shows that water absorption increases with the rate of residue load. The average water absorption rate of bagasse fibres is estimated at 8% for the 2.5 mm fiber size and 12% for the 4 mm fiber size for all composites. Mechanical characterization by bending tests reveals a fragile behavior of the samples tested. Young’s modulus decreases when the load rate of fibrous residues increases regardless of the size of the fibers.

关键词： Composite Polymer Bagasse Young Modulus Saccharum officinarum

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Physico-Chemical and Thermal Characterization of Some Lignocellulosic Fibres: Ananas comosus(AC), Neuropeltis acuminatas(NA) and Rhecktophyllum camerunense(RC)

引用

Journal of Minerals and Materials Characterization and Engineering 2020年第4期8卷 205-222页

作者： Achille Désiré Omgba betene fabien ebanda betene Florian Martoïa Pierre J. J. Dumont Ateba Atangana Pierre Marcel Anicet Noah Department of Mechanical Engineering ENSET University of Douala Douala Cameroon Laboratory of Mechanics University of Douala Douala Cameroon University of Lyon INSA-Lyon CNRS UMR5259 LaMCoS Lyon France

This paper focuses on the study of the physical, biochemical, structural, and thermal properties of plant fibres of Rhecktophyllum camerunense (RC), Neuropeltis acuminatas (NA) and Ananas comosus (AC) from the equatorial region of Cameroon. The traditional use of these fibres inspired researchers to investigated their properties. This study aims at improving the state of knowledge with a view to diversifying applications. The fibres are extracted by retting. Then, their apparent density was measured following the ASTM D792 standard and their water moisture absorption and moisture content were also evaluated. Their molecular structure was studied by ATR-FTIR spectroscopy. A quantitative analysis of the biochemical composition was performed according to the analytical technique for the pulp and paper industry (TAPPI). A TGA/DSC analysis was also performed. The results reveal that the AC, NA and RC fibres have densities of 1.26 ± 1.06, 0.846 ± 0.13 and 0.757 ± 0.08 g·cm-3 respectively. They are also hydrophilic with a water absorption rate of 188.64 ± 11.94%, 276.16% ± 8.07% and 198.17% ± 20%. They have a moisture content of 12.21%, 10.36% and 9.37%. The studied fibres exhibit functional groups that are related to the presence of hemicellulose, pectin, lignin and cellulose. The cellulose crystallinity index was found to be 67.99%, 46.5% and 59.72% respectively. The fibres under study have the following chemical composition: an extractive content of 3.07%, 14.77% and 8.74%;a pectin content of 4.15%, 7.69% and 3.45%;a hemicellulose content of 4.90%, 15.33% and 7.42%;a cellulose content of 68.11%, 36.08% and 65.15%;a lignin content of 12.01%, 25.15% and 16.2%;and an ash content of 0.27%, 1.53% and 0.47% respectively. The thermal transitions observed on the thermograms correlate with the TAPPI chemical composition. It is observed that these fibres are thermally stable up to temperatures of 200°C, 220°C and 285°C. These results ma

关键词： Lignocellulosic Fibre Rhecktophyllum camerunense Neuropeltis acuminatas Ananas comosus Biochemical Composition Cellulose Crystallinity Index Thermal Behaviour

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

An In-Depth Analysis of the Causes of Road Accidents in Developing Countries: Case Study of Douala-Dschang Highway in Cameroon

引用

Journal of Transportation Technologies 2021年第3期11卷 455-470页

作者： Simon Armand Zogo Tsala Merlin Zacharie Ayissi Gerald Azeh Pierre Anicet Noah fabien betene ebanda Louis Max Ayina Ohandja Department of Civil Engineering Advanced Teachers Technical Training College of Ebolowa University of Yaoundé I Yaoundé Cameroon Laboratory of Mechanics University of Douala Douala Cameroon Ministry of Transport Kupe Muanenguba Divisional Delegation Bangem Cameroon National Advanced School of Engineering Yaoundé University of Yaoundé I Yaoundé Cameroon

This paper is aimed at identifying the risk factors that mainly contribute to reckless driving and other related causes of road accidents along the Douala-Dschang highway of Cameroon. The research work started with the collection of accident reports for 2018 and 2019 from security officials in charge of road safety and the police stations of the different localities included in the sample of the study. Three hundred and eighty-two (382) road accidents reports were collected and analyzed using the 2020 version logit regression model of XLSTAT. From these analyses, it appears that, of the 382 accidents recorded during this period, six factors were identified and classified as follows: causes of accidents related to speed and carelessness, location of the accident, type of vehicle at fault, day the accident occurred, time of the accident and the age of drivers involved. These results could contribute to reduce the gravity of accidents along the Douala-Dschang highway and develop other policies in the program for road safety. In addition, this study can as much as possible equally contribute to reorienting road construction trends and development techniques in our environment.

关键词： Road Safety Traffic Road Accidents Douala-Dschang Highway Logistic Regression Model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

State of Knowledge on Starch as an Alternative Solution to Petrochemical Resources—A Review

引用

Journal of Minerals and Materials Characterization and Engineering 2023年第2期11卷 49-62页

作者： Jonas Peequeur Essome Mbang Pierre Marcel Anicet Noah Laurent Libog Téclaire Ngoup Michel Mbere Taoga fabien betene ebanda Laboratory of Mechanical ENSET University of Douala Douala Cameroon Department of Mechanical Engineering National Advanced School of Engineering University of Yaoundé I Yaoundé Cameroon Laboratory of Mechanics and Materials Adapted (LAMMA) ENSET University of Douala Douala Cameroon

The use of plastics from petrochemical resources poses environmental impacts, and one of the alternative solutions is the use of starch. The objective of this present work has been to present the literature on starch, and to highlight the debate in the development of composite films. The approach adopted was to present the state of the art on starch and thermoplastic starch matrix composites. The work shows that starch is available worldwide and can be used in the manufacture of biodegradable plastics;the debate remains on the reinforcement of thermoplastic starch to improve its physical and mechanical properties poor;then researchers must diversify the reinforcements to see the impact on the properties of thermoplastic starch.

关键词： Plastics Starch Composite Films Thermoplastic Starch Biodegradable

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Physical-Chemical and Mechanical Characterization of the Bast Fibers of Triumfetta cordifolia***. from the Equatorial Region of Cameroon

引用

Journal of Minerals and Materials Characterization and Engineering 2020年第4期8卷 163-176页

作者： Armel Edwige Mewoli César Segovia fabien betene ebanda Atangana Ateba Pierre Marcel Anicet Noah Benoit Ndiwe Abel Emmanuel Njom Department of Mechanical Engineering ENSET University of Douala Douala Cameroon Laboratory of Mechanics University of Douala Cameroon Douala Cameroon CETELOR University of Lorraine CETELOR/27 rue Philippe SEGUIN Epinal France Laboratory of Mechanics Materials and Modelization National School of AGRO-Industrial Sciences (ENSAI) Physics Application and Engineering Ngaoundere University Ngaoundere Cameroon Laboratory of Mechanics Materials Structures and Integrated Manufacturing National Advanced School of Engineering University of Yaounde 1 Yaounde Cameroon

The project consists in the implementation of a biocomposite based on tannin resin and natural rubber matrices with the bast fibres of Triumfetta cordifolia ***.“Okong” from the equatorial region of Cameroon as reinforcement. A study of this still little known fibre is necessary. This paper evaluates the physico-chemical and mechanical characteristics of the fibers. The fibers are extracted by us. A series of experiments is conducted for this purpose: morphological observation with a scanning electron microscope (SEM);density evaluation with a helium pycnometer;absorption rate evaluation according to the protocol available in the literature, Fourier Transform Infrared Spectrometry (FT-IR), chemical composition evaluation according to ASTM 1972 and ASTM 1977 standards, thermogravimetric analysis (TGA) and tensile tests on fiber bundles according to NF T25-501-3. The results show that the fiber is made up of several elementary fibers with oval cross-sections. A density of 1.477g/cm3 close to that of hemp. These fibers have a water absorption rate of 342.5%, which correlates with the presence of free hydroxyl functional groups obtained from the spectrometry study (FT-IR). Chemical analysis reveals that the fiber is made up of celluloses (44.4%), hemicelluloses (30.8%), lignins (18.9%), pectins (3.3%), waxes (0.5%) and minerals (2.1%). In addition, we learn that the fibers studied dehydrate at 11.49%, showinga notable thermal stability around 235°C with a peak thermal decomposition of cellulose located at 420°C. In terms of mechanical behaviour, the results reveal that the fibers offer a Young’s modulus in traction of 12.4 ± 6.9 GPa, a tensile strength of 526 ± 128 MPa and an elongation at break of 2.25%. The information thus obtained makes it possible to place these fibers in the same fiber group as flax and jute. They could therefore be used for the same types of applications. They also inform us that these fibers can withstand the temperat

关键词： Triumfetta cordifolia Fibers Morphology Chemical Analysis Thermal Degradation Mechanical Behavior

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Hybrid Composite Based on Natural Rubber Reinforced with Short Fibers of the Triumfetta cordifolia/Saccharum officinarum L.: Performance Evaluation

引用

Journal of Minerals and Materials Characterization and Engineering 2022年第5期10卷 385-399页

作者： Abel Emmanuel Njom Armel Mewoli Marie Josette Ndengue fabien betene ebanda Augustine Demze Nitidem Sandrine Biloa Otiti Yannick Devario Youssi Bang Legrand Ndoumou Belinga Pierre Marcel Anicet Noah Atangana Ateba Department of Mechanical Engineering ENSET University of Douala Douala Cameroon Laboratory of Materials Mechanics Structures and Integrated Manufacturing National Advanced School of Engineering University of Yaoundé 1 Yaoundé Cameroon Laboratory of Engineering Civil and Mechanics National Advanced School of Engineering University of Yaoundé 1 Yaoundé Cameroon Laboratory of Mechanics University of Douala Douala Cameroon Mechanics and Adapted Materials Laboratory (LAMMA) ENSET Douala Cameroon

This article contributes to the development of the new class of fully biodegradable “green” composites by combining fibers (natural/bio) with biodegradable resin. The vegetable fibers (Triumfetta cordifolia and sugarcane bagasse) treated with NaOH and bleached were incorporated into a natural rubber matrix. The influence of the fiber ratio on the physical properties, tensile strength and surface hardness of the hybrid composites was analyzed. The results show that the addition of fibers in the natural rubber matrix increases the water absorption capacity but gradually reduces it with increasing fiber ratio. The hybrid composites of the NRT50-50B proportions show the best tensile strengths at 20 phr and a shore A hardness of 43.7 at 30 phr. The combination of two fibers has improved the physical and mechanical properties of the hybrid composites which can be used in engineering applications.

关键词： Hybrid Composites Triumfetta cordifolia Fiber Sugarcane Bagasse Fiber Natural Rubber Shore a Hardness

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Study of the Relative Variations of the Thermal Properties and Crystallinity of Blends (PP/EPR)/Calcium Carbonate

引用

Modeling and Numerical Simulation of Material Science（材料科学建模与数值模拟） 2021年第1期

作者： Pierre Marcel Anicet Noah fabien betene ebanda Louis-Max Ayina Ohandja Ateba Atangana

来源：评论

学校读者我要写书评

暂无评论

Implementation and Evaluation of Certain Properties of a Polymer Matrix Composite Material Reinforced by Fibrous Residues of Saccharum officinarum in View of an Applicability Orientation

引用

Journal of Minerals and Materials Characterization and Engineering（矿物质和材料特性和工程） 2021年第2期

作者： Marie Josette Ndengue Merlin Zacharie Ayissi Pierre Marcel Anicet Noah fabien betene ebanda Atangana Ateba

来源：评论

学校读者我要写书评

暂无评论

State of Knowledge on Starch as an Alternative Solution to Petrochemical Resources—A Review

引用

Journal of Minerals and Materials Characterization and Engineering（矿物质和材料特性和工程） 2023年第2期

作者： Jonas Peequeur Essome Mbang Pierre Marcel Anicet Noah Laurent Libog Téclaire Ngoup Michel Mbere Taoga fabien betene ebanda

来源：博看期刊评论

在线全文

博看期刊

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：