检索结果-南通市图书馆

Advanced solar materials for thin-film photovoltaic cells

在线全文

学校读者我要写书评

暂无评论

Frontiers of physics 2011年第2期6卷 177-196页

作者： Fu-qiang HUANG Chong-yin YANG dong-yun wan College of Engineering and College of Chemistry and Molecular Engineering Peking University Beijing 100871 China CAS Key Laboratory of Materials for Energy Conversion Shanghai Institute of Ceramics Chinese Academy of Sciences Shanghai 200050 China Suzhou Institute of Nano-Tech and Nano-Bionics Chinese Academy of Sciences Suzhou 215123 China

As one of the most promising solutions for the green energy, thin-film photovoltaic cell technology is still immature and far from large-scale industrialization. The major issue is getting low cost and stable module efficiency. To solve these problems, a large amount of advanced solar materials have been developed to improve all parts of solar cell modules. Here, some new solar material developments applied in different critical parts of chalcogenide thin-film photovoltaic cells are reviewed. The main efforts are focused on improving light trapping and antireflection, internal quantum efficiency and collection of photo-generated carriers.

关键词： thin-film solar cell thin films CIGS CdTe

Reactive diffusion bonding of SiCp/Al composites by insert layers of mixed Al-Si and Al-Si-SiC powders

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of University of Science and Technology Beijing 2005年第5期12卷 445-449页

作者： Jihua Huang Yueling dong yun wan Jiangang Zhang Hua Zhang Materials Science and Engineering School University of Science and Technology Beijing Beijing 100083 China

Mixed Al-Si and Al-Si-SiC powders were employed as insert layers to reactive diffusion bond SiCp/6063 MMC （metal matrix composites）. The results show that SiCp/6063 MMC joints bonded by the insert layer of the mixed Al-Si powder have a dense joining layer with a typical hypoeutectic microstructtn＇e. Using the mixed Al-Si-SiC powder as the insert layer, SiCp/6063 MMC can be reactive diffusion bonded by a composite joint. Because of the SiC segregation, however, there are a number of porous zones in the joining layer, which results in the bad shear strength of the joints reactive diffusion bonded by the insert layer of the mixed A1-Si- SiC powder, even lower than that of the joints reactive diffusion bonded by the insert layer of the mixed Al-Si powder. Ti and Mg added in the insert layers obviously improve the strength of the joints reactive diffusion bonded by the insert layer of the mixed Al- Si-SiC powder, especially, Mg has a more obvious effect.

关键词： reactive diffusion bonding insert layer SiCp/Al MMCs

Reactive Diffusion Bonding of SiCp/Al Composites by Insert Powder Layers with Eutectic Composition

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2005年第5期21卷 779-781页

作者： Jihua HUANG Yueling dong, Jiangang ZHANG, yun wan and Guoan ZHOUSchool of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China School of Materials Science and Engineering University of Science and Technology Beijing Beijing 100083 China

Mixed Al-Si and Al-Cu powders were investigated as insert layers to reactive diffusion bond SiCp/6063 metal matrix composite （MMC）. The results show that SiCp/6063 MMC joints bonded by the insert layers of the mixed Al-Si and Al-Cu powders have a dense joining layer of high quality. The mass transfer between the bonded materials and insert layers during bonding leads to the hypoeutectic microstructure of the joining layers bonded by both the mixed Al-Si and Al-Cu powders with eutectic composition. At fixed bonding time （temperature）, the shear strength of the joints by both insert layers of the mixed Al-Si and Al-Cu powders increases with increasing the bonding temperature （time）, but get maxima at bonding temperature 600℃ （time 90 min）.

关键词： Reactive diffusion bonding Insert powder layer SiCp/Al metal matrix composites

CaH2-promoted activity of Ni-carbonate interface for CO2 methanation

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 522-532页

作者： Jin-Peng wang Guo-Cui Mao Hui-Lin Jiang Bao-Xia dong yun-Lei Teng School of Chemistry and Chemical Engineering Yangzhou University

Transition metal-carbonate interfaces often act as active sites in heterogeneous catalytic *** interface between transition metal and metal carbonate exhibits a dynamic equilibrium during the CO2hydrogenation reaction,involving surface carbonate hydrogenation and ***,there have been few reports on engineering the activity of the interface between transition metal and alkaline earth metal carbonate for catalytic *** work demonstrated that the incorporation of CaH2in Ni/CaCO3enhances the CO2methanation activity of the *** CO2conversion for Ni/CaH2-CaCO3reached 68.5%at 400°C,which was much higher than that of the Ni/CaCO3（31.6%） and Ni/CaH2-CaO （42.4%） ***,the Ni/CaH2-CaCO3catalysts remained stable during the stability test for 24 h at 400°C and 8 *** research revealed that CaH2played a crucial role in promoting the activity of the Ni-carbonate interface for ***2could modify the electronic structure of Ni and tune the structural properties of CaCO3to generate medium basic sites （OH groups）,which are favorable for the activation of H2and ***-situ Fourier transform infrared spectroscopy （FTIR） analysis combined with density functional theory calculations demonstrated that CO2activation occurs at the hydroxyl group （OH） on the CaH2-modified Ni-carbonate surface,leading to the formation of CO3H****,our study has confirmed that CO2methanation over the Ni/CaH2-CaCO3catalysts proceeds via the formate pathway.

关键词： CO 2 methanation Metal hydride Ni catalysts Carbonate Metal-carbonate interface

Aligned Ion Conduction Pathway of Polyrotaxane‑Based Electrolyte with Dispersed Hydrophobic Chains for Solid‑State Lithium–Oxygen Batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第2期17卷 169-186页

作者： Bitgaram Kim Myeong‑Chang Sung Gwang‑Hee Lee Byoungjoon Hwang Sojung Seo Ji‑Hun Seo dong‑wan Kim Department of Materials Science and Engineering Korea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea School of Civil Environmental and Architectural EngineeringKorea University145 Anam‑RoSeongbuk‑GuSeoul 02841Republic of Korea Materials Science and Chemical Engineering Center Institute for Advanced Engineering(IAE)Yongin 17180Republic of Korea

A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety *** study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves ***-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain *** this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 *** situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen *** situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability *** present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.

关键词： Solid polymer electrolyte Lithium-oxygen batteries Polyrotaxane ion conductivity Hydrophobic chain

Modeling tactile perceived intensity for vibration from a coin eccentric rotating mass motor

在线全文

学校读者我要写书评

暂无评论

Science China Technological Sciences 2025年

作者： yun FANG Jingchen HUANG Yujun WU Jiaqi dong Weichao GUO Xinjun SHENG State Key Laboratory of Mechanical System and Vibration School of Mechanical Engineering Shanghai Jiao Tong University Meta Robotics Institute Shanghai Jiao Tong University

Establishing the relationship between vibrotactile parameters and perceived intensity（PI） is of great significance in the regulation of desired sensations, which contribute to haptic interfaces in practical applications. Coin eccentric rotating mass（ERM） motors are routinely utilized due to their lightweight design and efficient ability to evoke strong tactile sensations. By adjusting input voltages, ERMs can yield different stimuli, but the effects of their physical properties on PI remain ***, we developed the physical model of the ERM-skin system and optimized the parameters affecting PI. Moreover, the relationship between stimulus and perception was derived based on Fechner?s law. Three experiments were conducted on fifteen subjects（ten males and five females, aged 24.40 ± 2.87 years） to identify the vibration parameters and corresponding PI to verify the proposed PI model. ERMs in this study were attached to phantom skin/forearm with slim adhesive tape to minimize the interference. Experiment 1 performed vibration calibration with ERM attached to the skin phantom to simulate the actual configuration. Then, the relative and absolute PI of subjects on specific stimuli were acquired in Experiments 2 and *** fitting reliability of the proposed PI model was evaluated on fifteen subjects with R2of 0.73 ± 0.07 and root mean squared error（RMSE） of 1.35 ± 0.28. Overall, the proposed PI model established the quantitative relationship between stimulus parameters（vibration parameters and physical parameters） and subjective PI, which provided theoretical support for ERM optimization and vibrotactile modulation.

关键词：

Sex-dependent alterations in extracellular vesicles linking chronic spinal cord injury to brain neuroinflammation and neurodegeneration

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第2期20卷 483-484页

作者： yun Li Junfang Wu Department of Anesthesiology&Shock Trauma and Anesthesiology Research(STAR)CenterUniversity of Maryland School of MedicineBaltimoreMDUSA

Traumatic spinal cord injury(SCI)is a devastating exogenous injury with long-lasting consequences and a leading cause of death and disability *** in assistive technology,rehabilitative interventions,and the ability to identify and intervene in secondary conditions have significantly increased the long-term survival rate of SCI patients,with some people even living well into their seventh or eighth *** survival changes have led neurotrauma researchers to examine how SCI interacts with brain *** health and epidemiological data showed that patients with long-term SCI can have a lower life expectancy and quality of life,along with a higher risk of comorbidities and complications.

关键词： alterations inflammation injury

Low-temperature chlorination roasting technology for the simultaneous recovery of valuable metals from spent LiCoO_(2)cathode material

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 80-91页

作者： Junjie Shi Changle Hou Jingjing dong dong Chen Jianzhong Li Key Laboratory for Ecological Metallurgy of Multimetallic Mineral(Ministry of Education) Northeastern UniversityShenyang 110819China School of Metallurgy Northeastern UniversityShenyang 110819China

With the continuous increase in the disposal volume of spent lithium-ion batteries(LIBs),properly recycling spent LIBs has become essential for the advancement of the circular *** study presents a systematic analysis of the chlorination roasting kinetics and proposes a new two-step chlorination roasting process that integrates thermodynamics for the recycling of LIB cathode *** activation energy for the chloride reaction was 88.41 kJ/mol according to thermogravimetric analysis–derivative thermogravimetry data obtained by using model-free,model-fitting,and Z(α)function(αis conversion rate).Results indicated that the reaction was dominated by the first-order(F1)model when the conversion rate was less than or equal to 0.5 and shifted to the second-order(F2)model when the conversion rate exceeded *** conditions were determined by thoroughly investigating the effects of roasting temperature,roasting time,and the mass ratio of NH_(4)Cl to LiCoO_(2).Under the optimal conditions,namely 400℃,20 min,and NH_(4)Cl/LiCoO_(2)mass ratio of 3:1,the leaching efficiency of Li and Co reached 99.43% and 99.05%,*** of the roasted products revealed that valuable metals in LiCoO_(2)transformed into CoCl_(2) and ***,the reaction mechanism was elucidated,providing insights for the establishment of a novel low-temperature chlorination roasting technology based on a crystal structure *** technology can guide the development of LIB recycling processes with low energy consumption,low secondary pollution,high recovery efficiency,and high added value.

关键词： spent lithium-ion battery thermodynamics chlorination roasting kinetics circular economy

Enhanced solid-electrolyte interface efficiency for practically viable hydrogen-air fuel cell systems

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 356-368页

作者： Venkitesan Sakthivel dong Jin Yoo Graduate School Department of Energy Storage/Conversion Engineering (BK21 FOUR) Hydrogen and Fuel Cell Research Center Jeonbuk National University Jeonju Department of Life Science Jeonbuk National University

Proton exchange membrane fuel cells （PEMFCs） provide an appealing sustainable energy system,with the solid-electrolyte membrane playing a crucial role in its overall ***,sulfonated poly（1,4-phenylene ether-ether sulfone）(SPEES),an aromatic hydrocarbon polymer,has garnered considerable attention as an alternative to Nafion ***,the long-term durability and stability of SPEES present a significant *** this context,we introduce a potential solution in the form of an additive,specifically a core–shell-based amine-functionalized iron titanate （A–Fe2TiO5）,which holds promise for improving the lifetime,proton conductivity,and power density of SPEES in *** modified SPEES/A–Fe2TiO5composite membranes exhibited notable characteristics,including high water uptake,enhanced thermomechanical stability,and oxidative ***,the SPEES membrane loaded with 1.2 wt%of A–Fe2TiO5demonstrates a maximum proton conductivity of 155 mS cm-1,a twofold increase compared to the SPEES membrane,at 80°C under 100%relative humidity （RH）.Furthermore,the 1.2 wt%of A–Fe2TiO5/SPEES composite membranes exhibited a maximum power density of 397.37 mW cm-2and a current density of 1148 mA cm-2at 60°C under 100%RH,with an opencircuit voltage decay of 0.05 m V/h during 103 h of continuous *** study offers significant insights into the development and understanding of innovative SPEES nanocomposite membranes for PEMFC applications.

关键词： Composite membranes