检索结果-南通市图书馆

Particuology 2024年第8期91卷 315-322页

作者： Jialing Zhou Rui Zhang dong liu Key Laboratory of Thermal Control of Electronic Equipment Ministry of Industry and Information TechnologyNanjing210094China Advanced Combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing210094China

Aluminum is an attractive alternative fuel,but it burns very inefficiently due to the formation of a dense Al_(2)O_(3)layer which prevents O_(2)from diffusion to the surface of Al *** previous experiments,the combustion of millimeter-sized Al(mAl)particles in the fluidized bed has achieved a substantial increase in the combustion efficiency,but further improvements are still *** this study,the effects of reaction atmosphere on the fluidized combustion of mAl particles were *** experiments with different O_(2)/H_(2)O/CO_(2)concentrations were *** experimental results indicate that the combustion efficiency of mAl particles in fluidized bed increases as the mole fraction of O_(2),H_(2)O or CO_(2)increases,and the highest combustion efficiency can reach 38.7%.After the analysis of the oxide film on the surface of aluminum particles,it was found that it is easier to generate the unstableθ-Al_(2)O_(3)under CO_(2)atmosphere,and it is easier to generate the unstableγ-Al_(2)O_(3)andθ-Al_(2)O_(3)under H_(2)O *** unstable Al_(2)O_(3)film is more likely to be abraded in the fluidized bed,which leads to the effective improvement of the combustion efficiency.

关键词： Al combustion Fluidized bed Atmosphere Combustion efficiency

Thermoelectrocatalysis: an emerging strategy for converting waste heat into chemical energy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

National Science Review 2024年第4期11卷 19-21页

作者： Yuqiao Zhang Shun Li Jianming Zhang Li-dong Zhao Yuanhua lin Weishu liu Federico Rosei Institute of Quantum and Sustainable Technology(IQST) School of Chemistry and Chemical Engineering Jiangsu University School of Materials Science and Engineering Beihang University State Key Laboratory of New Ceramics and Fine Processing School of Materials Science and Engineering Tsinghua University Department of Materials Science and Engineering Southern University of Science and Technology Centre for Energy Materials and Telecommunications Institut national de la recherche scientifique

Waste heat emissions are universally present in the environment and industrial production. Innovations aimed at efficiently utilizing low-grade thermal energy have long been desired. Among these, thermoelectric materi...

关键词：

Enhancing solar-driven overall water splitting via both sacrifice and noble metal free photocatalysis: copper cluster/boron-doped carbon nitride catalysts

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第11期67卷 3886-3896页

作者： Yun-dong Cao Yuxi Zhang Jian Song Hong liu Zhiyuan Song lin-lin Fan Cai-Li Lv Guang-Gang Gao School of Materials Science and Engineering University of Jinan

The major impediment to the additional industrialization of water splitting is the high cost of the co-catalyst made of noble metals and the sacrificial reagent. A binary photocatalytic system, consisting of B-doped g-C3N4nanosheets(Cu20@BCN-X) and atomically accurate copper clusters, is designed in this study. The copper clusters serve as co-catalysts for H2evolution and exhibit Pt-like activity, whereas the nanosheets serve as carriers and semiconductor components for O2evolution. Such binary system, created using simple techniques, demonstrates hydrogen bonding interactions that promote synergistic effects and efficient binding and charge transfer across the interface between the two components. Band position manipulation of carbon nitride nanosheets demonstrates a Z-scheme charge transfer mechanism between the nanosheets and copper clusters. This photocatalytic system can accomplish the photocatalytic overall water splitting process(259.9 μmol g-1h-1of H2and 129.4 μmol g-1h-1of O2) without using sacrificial agents or noble metal co-catalysts. This work lays the foundation for the design of overall water splitting catalysts by precisely manipulating the energy levels, and it also paves the way for commercialized photocatalytic catalysts that do not require noble metals or sacrificial chemicals.

关键词： copper clusters band modulation photocatalysts water splitting

Natural product-induced oxidative stress-synergistic anti-tumor effects of chemotherapeutic agents

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Traditional Medicine Research 2024年第3期9卷 10-23页

作者： Shu-Fan Wang Shi-Qi dong Quan dong Wen-Xin lin Mei dong Duo liu Department of Pharmacy Harbin Medical University Cancer HospitalHarbin 150086China

Reactive oxygen species are closely related to tumor *** recent years,reactive oxygen species has become a hot spot in tumor therapy,and many natural substances in nature contain compound components with anti-tumor ***,there is a lack of discussion on the synergistic anti-tumor effects of natural products in combination with chemotherapeutic drugs through reactive oxygen *** terms“natural products”,“reactive oxygen species”,“anti-tumor”,and“chemotherapy”were used to identify the synergistic effects of natural *** conducted a systematic literature search in PubMed and Web of Science databases for relevant research articles and reviews published in recent *** systematically summarized the studies related to anti-tumor active ingredients in natural compounds in the field of reactive oxygen species in recent years.A total of 77 relevant literatures were *** them,45 literatures containing various natural products such as terpenoids,flavonoids,alkaloids,*** anti-tumor effects by regulating reactive oxygen species levels,and 32 literatures regarding adjunctive role of natural products in anti-tumor *** this study,we found that natural products exert anti-tumor effects by elevating reactive oxygen species *** provides strong theoretical support for future clinical studies.

关键词： nature products tumor reactive oxygen species combination chemotherapy oxidative stress

Super-high bed sintering for iron ores:problems ascertainment

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1063-1070页

作者： Liang-ping Xu Hui-bo liu Yu-chao Zhao Qiang Zhong Zhong-lin dong Guang-hui Li Tao Jiang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina

Super-high bed sintering process is an important development direction of iron ore sintering for its lower emission and higher ***,there is a lack of deep understanding of the uneven quality of super-high bed sintering products,and the deterioration of reduction disintegration performance,the thickening of hearth layer and the reduction in energy-saving effect are perplexing enterprises and *** ascertain the problems of super-high bed sintering,ten sintering machines with the areas of 265,280,360,550 and 660 m^(2)and bed depth above 900 mm were sampled and *** results showed that problems were mainly shown in the unevenness of chemical composition,macrostructure,mechanical strength and metallurgical *** chemical composition exhibits severe segregation in both horizontal and vertical directions,with basicity segregation reaching as high as *** uneven macrostructure of sinter is reflected in a 10%difference in porosity and mechanical strength increase in 16%–19%along the vertical *** reducibility and reduction disintegration performance gradually deteriorate along the bed depth,with a difference of 10.5%in reducibility and 7.3%in RDI−0.5 mm(reduction disintegration index of sinter with size smaller than 0.5 mm).

关键词： Super-high bed sintering Uneven sinter performance Segregation Agglomeration Iron ore

Broadband angular spectrum analog processors based on all-dielectric metasurfaces

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第7期67卷 188-190页

作者： lin Deng Yongmin liu Department of Electrical and Computer Engineering Northeastern UniversityBoston 02115USA Department of Mechanical and Industrial Engineering Northeastern UniversityBoston 02115USA

Digital signal processors are extensively used to execute mathematical operations and advanced computational tasks on digital ***,they suffer from several inherent limitations,including low speed,high energy consumption,and large memory requirements,because of the hardware bottleneck and the imperative conversion between digital and analogue signals.

关键词： dielectric spectrum hardware

Effect of CeO_(2) nanoparticle sizes on catalytic performances of sulfated CeO_(2)/Al_(2)O_(3) catalyst in NH_(3)-SCR reaction

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第3期42卷 515-522,I0004页

作者： Zhenghua Hu dongqi An Lei Zhang Xuping Wang Siyong Fang Xinyun Tian liu Qiu Jingfang Sun Tingzhen Li lin dong School of Environmental and Chemical Engineering Chongqing Three Gorges UniversityChongqing404000China Key Laboratory of Water Environment Evolution and Pollution Control in the Three Gorges Reservoir Chongqing Three Gorges UniversityChongqing404000China Jiangsu Key Laboratory of Vehicle Emissions Control Center of Modern AnalysisNanjing UniversityNanjing210093China

The sulfated CeO_(2)/Al_(2)O_(3) catalysts with different sizes of CeO_(2)nanoparticles were prepared by using pure H_2O or acetic acid solution as impregnation solvent, and the influence of sizes of CeO_(2) nanoparticles on the catalytic performances of the sulfated CeO_(2)/Al_(2)O_(3) catalyst was studied. The catalytic performance tests show that the sulfated CeO_(2)/Al_(2)O_(3) catalyst using acetic acid solution as impregnation solvent has better catalytic activity and the resistance to K+poisoning than the sulfated CeO_(2)/Al_(2)O_(3) catalyst using pure H_(2)O as impregnation solvent. The excellent catalytic performances can be ascribed to the smaller sizes of CeO_(2) nanoparticles in CeO_(2)/Al_(2)O_(3) catalyst using acetic acid solution, which results in larger amount of adsorbed sulfate species, surface acid sites, surface active oxygen species and excellent redox property. These features are helpful for improving the catalytic performances of sulfated CeO_(2)/Al_(2)O_(3) catalyst using smaller amount of CeO_(2) to cut the costs.

关键词： Cerium-based catalyst Nanoscale effect NH_(3)selective catalytic reaction Sulfation process Alkali metal poisoning Rare earths

Sensitivity analysis of modeling parameters to soot and PAHs prediction in ethylene inverse diffusion flame

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第2期67卷 486-498页

作者： WU BingKun LI TianJiao liu dong MIIT Key Laboratory of Thermal Control of Electronic Equipment School of Energy and Power EngineeringNanjing University of Science and TechnologyNanjing 210094China Advanced Combustion Laboratory School of Energy and Power EngineeringNanjing University of Science and Technology Nanjing 210094China

The soot formation model based on inverse ethylene diffusion flames was performed to study the sensitivity of the soot formation process to the prediction *** effects of efficiency parameters such as soot inception,surface growth and coagulation on the simulation results were studied by using the adjustable efficiency *** addition,the reversible soot model and conjugate heat transfer(CHT)model were also introduced to explore their *** indicated that,among adjustable efficiency parameters,the nucleation efficiency had the greatest influence on the predicted soot and PAHs distributions,while the Habstraction-C2H2-addition(HACA)process and PAH adsorption surface growth efficiencies impacted *** adjustable efficiency parameters had a significant effect on the concentration of soot gaseous precursors and soot particles,but their effects on temperature,gas phase molecules,and intermediate species were not *** the nucleation efficiency increased from 2×10^(-6)to 1×10^(-4),the predicted value of the integrated soot was increased by nearly 50%,and the maximum primary particle number density and the number of aggregates were increased by an order of *** maximum concentration of BAPYR was ***,the peak temperature along the axial direction increased by only 3.5 *** the reversible soot model,the approximation results of the adjustable efficiency parameters could be modified,which showed the feasibility of the *** use of the CHT model promoted pyrolysis of the fuel below the outlet of the fuel tube,with high-temperature zones,soot zones,and PAHs zones moving towards higher flame ***,when using the reversible model and the CHT model,the maximum soot volume fraction decreased by 39%compared with the basic efficiency parameters,while the concentration of BAPYR increased by 162%,and the concentrations of gas phase species were decreased.

关键词： inverse diffusion flames soot formation soot model ethylene

Super-high bed sintering for iron ores:behaviors,causes and solutions of horizontal segregation on strand

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1590-1596页

作者： Liang-ping Xu Hui-bo liu Zhong-lin dong Qiang Zhong Yu-chao Zhao Guang-hui Li School of Minerals Processing and Bioengineering Central South UniversityChangsha 410083HunanChina

Horizontal segregation has been a constraint to the development and application of super-high bed *** eliminate the horizontal segregation of super-high bed sintering,several typical sintering machines were sampled and analyzed,and theoretical calculation was made to compare the bed depth and their differences in different areas within the mixture ***,solutions were proposed and applied to a 265 m^(2) sintering *** results showed that the horizontal seg-regation of the 265 m^(2) sintering machine was dominated by particles larger than 8 mm with horizontal segregation degree of 0.48,while 360 and 550 m^(2) sintering machines were affected by 5-8 mm and 1-3 mm particles with horizontal segregation degree of 0.27 and 0.31,*** analysis indicated the different segregation distribution results from the matching of the bed depth of each area within the mixture ***,the horizontal segregation degree not larger than 0.06 was achieved by optimizing the time parameters and the division of three zones on the 265 m^(2) sintering machine.

关键词： Super-high bed sintering Horizontal segregation Feeder Particle distribution Agglomeration

Field survey and analysis on near-fault severely damaged high-speed railway bridge in 2022 M6.9 Menyuan earthquake

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Earthquake Engineering and Engineering Vibration 2024年第4期23卷 1043-1055页

作者： lin Xuchuan liu Fuxiang Shan Wenchen Key Laboratory of Earthquake Engineering and Engineering Vibration Institute of Engineering MechanicsChina Earthquake AdministrationHarbin 150080China Key Laboratory of Earthquake Disaster Mitigation Ministry of Emergency ManagementHarbin 150080China Institute of Smart City and Intelligent Transportation Southwest Jiaotong UniversityChengdu610000China

The 2022 M6.9 Menyuan earthquake caused severe damage to a high-speed railway bridge,which was designed for high-speed trains running at speeds of above 250 km/h and is located right next to the *** of this type have been widely used for rapidly constructing the high-speed railway network,but few bridges have been tested by near-fault devastating *** potential severe impact of the earthquake on the high-speed railway is not only the safety of the infrastructure,trains and passengers,but also economic loss due to interrupted railway ***,a field survey was carried out immediately after the earthquake to collect time-sensitive *** damage to the bridge was carefully investigated,and quantitative analyses were conducted to better understand the mechanism of the bridge *** was found that seismic action perpendicular to the bridge’s longitudinal direction caused severe damage to the girders and rails,while none of the piers showed obvious deformation or *** maximum values of transverse displacement,out-of-plane rotation and twisting angle of girders reached 212.6 cm,3.1 degrees and 19.9 degrees,respectively,causing severe damage to the bearing supports and anti-seismic retaining *** observations provide a basis for improving the seismic design of high-speed railway bridges located in near-fault areas.

关键词： Menyuan earthquake field survey high-speed railway bridge near fault seismic damage