检索结果-南通市图书馆

Multiple damage zones around hydraulic fractures generated by high-frequency pulsating hydraulic fracturing

Petroleum Science 2024年第4期21卷 2688-2702页

作者： Yan Peng sheng-Jie wei Guang-Qing Zhang da.wei Zhou Chuang-Chao Xu School of Petroleum Engineering China University of Petroleum PetroChina Changqing Oilfield Company

Pulsating hydraulic fracturing(PHF) is a promising fracturing method and can generate a dynamic periodic pressure. The periodic pressure can induce fatigue failure of rocks and decrease initiation pressure of fracture. If the frequency of periodic pressure exceeds 10 Hz, the distribution of pressure along the main fracture will be heterogeneous, which is much different from the one induced by the common fracturing method. In this study, the impact of this special spatial feature of pressure on hydraulic fracture is mainly investigated. A coupled numerical simulation model is first proposed and verified through experimental and theoretical solutions. The mechanism of secondary fracture initiation around the main fracture is then discovered. In addition, sensitivity studies are conducted to find out the application potential of this new method. The results show that(1) this coupled numerical simulation model is accurate. Through comparison with experimental and theoretical data, the average error of this coupled model is less than 1.01%.(2) Even if a reservoir has no natural fracture, this heterogeneous distribution pressure can also cause many secondary fractures around the main fracture.(3) The mechanism of secondary fracture initiation is that this heterogeneous distribution pressure causes tensile stress at many locations along the main fracture.(4) Through adjusting the stimulation parameters, the stimulation efficiency can be improved. The average and amplitude of pressure can increase possibility of secondary fracture initiation. The frequency of this periodic pressure can increase number of secondary fractures. Even 6 secondary fractures along a 100 m-length main fracture can be generated.(5) The influence magnitudes of stimulation parameters are larger than ones of geomechanical properties, therefore, this new fracturing method has a wide application potential.

关键词： Tight reservoir Reservoir stimulation Numerical simulation Secondary fracture Fracture initiation

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Source model of the 2018 M_(w)7.5 Papua New Guinea earthquake constrained by InSAR measurements: Insight into a blind rupture beneath the New Guinea Highlands

引用

Geodesy and Geodynamics 2024年第4期15卷 315-325页

作者： wei Chen Tianchen sheng wei Xiong Key Laboratory of Earthquake Geodesy Institute of SeismologyChina Earthquake AdministrationWuhan 430071China Qinghai Provincial Basic Surveying and Mapping Institute Xining 810001China School of Geodesy and Geomatics Wuhan UniversityWuhan 430079China

The Southern Highland Fold and Thrust Belt(SHFTB),the boundary of the Australian plate and the New Guinea Highland block,significantly contributes to the convergent deformation along the plate ***,due to the lack of observation data,the detailed slip pattern of the SHFTB and the orogenic mechanism beneath the New Guinea Highlands remains *** 25 February 2018,the M_(w)7.5 Papua New Guinea(PNG)earthquake struck the southeastern segment of the *** detailed rupture characteristics of this event is significant for further clarifying the inter-seismic slip pattern along the ***,the coseismic deformation field of this earthquake was obtained using high-resolution ALOS-2 satellite *** find that the 2018 M_(w)7.5 PNG earthquake ruptured a large-scaled fault(SHFTB)extending to the lower crust(deeper than 20 km)beneath the New Guinea Highlands,with a dip angle of 24°.The slips on the fault plane are equivalent to moment magnitudes of M_(w)*** major asperities with thrust-dominated slip of up to 3.94 m are detected on the fault *** finding implies that the slip pattern on the eastern segment of the SHFTB is dominated by thrust,rather than with significant sinistral movement,as previously *** tectonic deformation across the New Guinea Highlands is possibly concentrated on the large-scale fault SHFTB and primarily controls the intra-continental orogeny in the central Papua New Guinea.

关键词： 2018M_(w)7.5PapuaNewGuineaearthquake The Southern Highlands Fold-and-Thrust Belt InSAR Slipdistribution Seismicrisk

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Theoretical study on the stability of nanobubbles and its verification in molecular dynamics simulation

引用

Particuology 2024年第4期87卷 99-105页

作者： sheng Mi Chaofeng Hou wei Ge School of Chemical Engineering and Technology Tianjin UniversityTianjin300072China State Key Laboratory of Multiphase Complex Systems Institute of Process EngineeringChinese Academy of SciencesBeijing.100190China School of Chemical Engineering University of Chinese Academy of SciencesBeijing100049China

The stability of vapor nanobubbles in bulk liquid was investigated theoretically and the critical bubble size was derived from macroscale thermodynamic equations,below which the system destabilizes with sharp drop in *** critical size was quantitatively verified in molecular dynamic simulation using the Lennard-Jones model of argon,where stronger attraction between the molecules at lower density is found to contribute most to the drop of system pressure and,as the Laplace pressure on the curved bubble interface fails to balance the pressure difference across the interface,the bubbles become *** theoretical model could be extended to other systems where reliable equations of state and interfacial tension are available.

关键词： Nanobubble Stability Phase diagram Critical size

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

H∞ Robustness for Distributed Control in Autonomous Microgrids Considering Cyber Disturbances

引用

CSEE Journal of Power and Energy Systems 2024年第2期10卷 696-706页

作者： Ge Cao Guannan Lou wei Gu Lina sheng School of Electrical Engineering Southeast UniversityNanjing 210096China

The physical connections and logical relationships between microgrids and communication networks allow microgrids to develop into typical cyber-physical systems(CPSs).With the extensive use of open communication mechanisms,the impact of cyber disturbances in public communication networks cannot be *** this paper,a parameter optimal method for a distributed secondary controller based on the robust control theory and consensus algorithm is presented to enhance the robustness of a secondary control system under data disturbance,parameter perturbation,and time ***,a distributed secondary control strategy of microgrids is demonstrated that coordinates frequency and voltage restoration and power ***,considering the impact of cyber events on the secondary control,a distributed robust controller gain design method is proposed to satisfy the H∞ performance *** solution of the distributed robust control is transformed into a linear matrix in equation problem and latency margin is simultaneously ***,a test microgrid CPS is simulated with and without time delay to investigate the impact of cyber events on system operational states and the effectiveness and robustness of the proposed method.

关键词： Cyber disturbance cyber-physical lsystem distributed control microgrid robust H∞control

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Transient Stability Analysis and Design of VSGs with Different DC-Link Voltage Controllers

引用

CSEE Journal of Power and Energy Systems 2024年第2期10卷 593-604页

作者： Chao Shen wei Gu Wanxing sheng Keyan Liu School of Electrical Engineering Southeast UniversityNanjingChina Power Distribution Research Department China Electric Power Research InstituteBeijing 100192China

Virtual synchronous control has been widely studied for the advantages of emulating inertia for voltage source converters (VSCs). A constant dc-link voltage is usually assumed in existing literature to estimate transient stability of virtual synchronous generators (VSGs). However, actual power supply in the dc-side of VSGs is limited and different dc-link voltage controllers are needed to achieve power balance between DC side and AC side. Addition of dc-link voltage controller has great influence on transient behavior of VSGs, which has not been investigated by previous research. To fill this gap, this paper gives insights into the effect of dc-link voltage dynamics on transient stability of VSGs. First, two typical kinds of VSGs with dc-link voltage controllers are introduced. Then, mathematical models considering dc-link dynamics are established and the effect of dc-link voltage controllers on transient synchronization stability of VSGs is revealed through equal area criterion (EAC). It is found that dc-link voltage controller would reduce stability margin of VSGs and design-oriented transient stability analysis is carried out quantitively using critical clearing time (CCT). Finally, simulation results are given to validate correctness of theoretical analysis.

关键词： DC-link voltage dynamics equal area criterion(eac) transient synchronization stability virtual synchronous generator(VSG)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

High-performance sodium storage for cobalt phosphide composite array electrodes

引用

Rare Metals 2024年第8期43卷 3724-3734页

作者： Man Zhang Xiao-Xu Liu Tian-Yi Ji Yang Li da.wei sheng Shao-Dong Li Pei-Pei Ren Ze-Xiang Shen School of Material Science and Engineering Shaanxi University of Science and TechnologyXi'an 710021China School of Physical and Mathematical Sciences Nanyang Technological UniversitySingapore 637371Singapore

Transition metal phosphides hold great potential as sodium-ion batteries anode materials owing to their high theoretical capacity and modest ***,volume changes and low intrinsic conductivity seriously largely hinder the further development of metal phosphide *** design of phosphide anode materials with reasonable structure is conducive to solving the problems of volume expansion and slow reaction kinetics during the *** this work,a composite material integrating zeolite imidazolate backbone(ZIF) and carbon materials was synthesized by the original growth ***,by the oxidation-phosphating process,CoP nanoarray composites riveted to carbon fiber(CoP@CF) were *** the CoP@CF,CoP nanoparticles are uniformly distributed on ZIF-derived carbon,reducing agglomeration and volume change during *** also provides a highly conductive network for the active material,improving the electrode ***,when evaluated as an anode for sodium-ion batteries,CoP@CF electrode displays enhanced reversible capacity(262 mAh·g^(-1) at 0.1 A·g^(-1)after 100 cycles),which is much better than that of pure CF electrode(57 mAh·g^(-1) at 0.1 A·g^(-1) after 100 cycles)prepared without the addition of *** rate performance of CoP@CF electrode is also superior to that of pure CF electrode at various current densities from 0.05 to1 A·g^(-1).The sodium storage behavior of CoP@CF was revealed by ex-situ X-ray photoelectron spectroscopy,X-ray diffraction,and synchrotron radiation absorption *** method provides a reference for the design and synthesis of anode materials in sodium-ion batteries.

关键词： Cobalt phosphide Array structure Freestanding anodes Sodium-ion batteries

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research advances in smart responsive-hydrogel dressings with potential clinical diabetic wound healing properties

引用

Military Medical Research 2024年第4期11卷 543-566页

作者： Ying Chen Xing Wang sheng Tao Qi Wang Pan-Qin Ma Zi-Biao Li Yun-Long Wu da.wei Li Fujian Provincial Key Laboratory of Innovative Drug Target Research and State Key Laboratory of Cellular Stress Biology School of Pharmaceutical SciencesXiamen UniversityXiamen 361102FujianChina Beijing National Laboratory for Molecular Sciences Institute of ChemistryChinese Academy of SciencesBeijing 100090China University of Chinese Academy of Sciences Beijing 100049China Senior Department of Orthopedics the Fourth Medical Center of Chinese PLA General HospitalBeijing 100091China Institute of Materials Research and Engineering A*STAR(Agency for ScienceTechnology and Research)Singapore 138634Singapore

The treatment of chronic and non-healing wounds in diabetic patients remains a major medical *** reports have shown that hydrogel wound dressings might be an effective strategy for treating diabetic wounds due to their excellent hydrophilicity,good drug-loading ability and sustained drug release *** a typical example,hyaluronic acid dressing(Healoderm)has been demonstrated in clinical trials to improve wound-healing efficiency and healing rates for diabetic foot ***,the drug release and degradation behavior of clinically-used hydrogel wound dressings cannot be adjusted according to the wound *** to the intricacy of diabetic wounds,antibiotics and other medications are frequently combined with hydrogel dressings in clinical practice,although these medications are easily hindered by the hostile *** this case,scientists have created responsive-hydrogel dressings based on the microenvironment features of diabetic wounds(such as high glucose and low pH)or combined with external stimuli(such as light or magnetic field)to achieve controllable drug release,gel degradation,and microenvironment improvements in order to overcome these clinical *** responsive-hydrogel dressings are anticipated to play a significant role in diabetic therapeutic wound ***,we review recent advances on responsive-hydrogel dressings towards diabetic wound healing,with focus on hydrogel structure design,the principle of responsiveness,and the behavior of *** but not least,the advantages and limitations of these responsive-hydrogels in clinical applications will also be *** hope that this review will contribute to furthering progress on hydrogels as an improved dressing for diabetic wound healing and practical clinical application.

关键词： Responsive-hydrogel Diabetic wound Anti-inflammation Tissue remodeling

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design and performance evaluation of a large field-of-view dual-particle time-encoded imager based on a depth-of-interaction detector

引用

Nuclear Science and Techniques 2024年第4期35卷 1-14页

作者： Dong Zhao Xu-Wen Liang Ping-Kun Cai wei Cheng Wen-Bao Jia da-Qian Hei Qing Shan Yong-sheng Ling Chao Shi Department of Nuclear Science and Technology Nanjing University of Aeronautics and AstronauticsNanjing 211106China Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education Institutions Suzhou 215000China School of Nuclear Science and Technology Lanzhou UniversityLanzhou 730000China

Time-encoded imaging is useful for identifying potential special nuclear materials and other radioactive sources at a *** this study,a large field-of-view time-encoded imager was developed for gamma-ray and neutron source hotspot imaging based on a depth-of-interaction(DOI)*** imager primarily consists of a DOI detector system and a rotary dual-layer cylindrical coded *** EJ276 plastic scintillator coupled with two SiPMs was designed as the DOI detector to increase the field of view and improve the imager *** difference in signal time at both ends and the log of the signal amplitude ratio were used to calculate the interaction position *** position resolution of the DOI detector was calibrated using a collimated Cs-137 source,and the full width at half maximum of the reconstruction position of the Gaussian fitting curve was approximately 4.4 *** DOI detector can be arbitrarily divided into several units to independently reconstruct the source distribution *** unit length was optimized via Am-Be source-location experiments.A multidetector filtering method is proposed for image *** method can effectively reduce image noise caused by poor DOI detector position *** vertical field of view of the imager was(-55°,55°)when the detector was placed in the center of the coded mask.A DT neutron source at 20 m standoff could be located within 2400 s with an angular resolution of 3.5°.

关键词： Time-encoded imager Depth-of-interaction detector Dual-particle imaging Hotspot imaging

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Disturbance Observer-Based Predictive Tracking Control of Uncertain HOFA Cyber-Physical Systems

引用

IEEE/CAA Journal of Automatica Sinica 2024年第7期11卷 1711-1713页

作者： da.wei Zhang Guo-Ping Liu IEEE the Center for Control Theory and Guidance Technology Harbin Institute of TechnologyHarbin 150001China the Center for Control Science and Technology Southern University of Science and TechnologyShenzhen 518055China

Dear Editor,In this letter,an output tracking control problem of uncertain cyber-physical systems(CPSs)is considered in the perspective of high-order fully actuated(HOFA)system theory,where a lumped disturbance is use... 详细信息

关键词： Observer Uncertain letter

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

High Speed Sintering:Assessing the Influence of Energy Input on Microstructure and Mechanical Properties of Polyether Block Amide(PEBA)Parts

引用

Chinese Journal of Polymer Science 2024年第5期42卷 675-682,I0004,I0010页

作者： Jiang-Tao Sun Zhi-Yong Fan Yi-wei Mao wei Li wei Zhu dao-sheng Cai Qing-Song wei State Key Laboratory of Materials Processing and Die&Mould Technology Huazhong University of Science and TechnologyWuhan430074China State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan430074China National Engineering Research Centre for High Efficiency Grinding Hunan UniversityChangsha410082China Wuhan EasyMFG Technology CO. LTDWuhan430074China

High speed sintering,a new powder-bed fusion additive manufacturing technology,utilizes infrared lights(IR)to intensely heat and melt polymer *** presence of defects such as porosity,which is associated with particle coalescence,is highly dependdent on the level of energy *** study investigate the influcence of energy input on porosity and its subsequent effects on the mechanical properties and microstructures of PEBA *** parts were manufactured with a variety of lamp powers,resulting in a range of energy input levels spanning from low to ***,they underwent testing using Archimedes’method,followed by tensile *** porosity,mechanical characteristics,and energy input exhibit a strong correlation;inadequate energy input was the primary cause of pore *** the reduced IR light power resulted in the following outcomes:porosity,ultimate tensile strength,and elongation of 1.37%,7.6 MPa,and 194.2%,*** the energy input was further increased,the porosity was reduced to as low as 0.05%and the ultimate tensile strength and elongation were increased to their peak values of 233.8%and 9.1 MPa,respectively.

关键词： High speed sintering Additive manufacturing Energy input Powder bed fusion PEBA

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：