检索结果-南通市图书馆

thermo-optically tunable spectral broadening in a nonlinear ultra-silicon-rich nitride Bragg grating

在线全文

学校读者我要写书评

暂无评论

Photonics Research 2021年第4期9卷 596-604页

作者： Yanmei Cao Ezgi Sahin Ju Won Choi Peng Xing George F.R.Chen d.k.t.ng Benjamin J.Eggleton dawn t.H.tan Photonics devices and Systems Group Singapore University of Technology and Design8 Somapah RoadSingapore 487372Singapore Current address:Photonic Systems Laboratory(PHOSL) Ecole Polytechnique Fédérale de LausanneSTI-IELStation 11CH-1015 LausanneSwitzerland Institute of Microelectronics A*STAR2 Fusionopolis Way#08-02Innovis TowerSingapore 138634Singapore Institute of Photonics and Optical Science School of PhysicsThe University of SydneySydneyNew South Wales 2006Australia the University of Sydney Nano Institute(Sydney Nano) The University of SydneySydneyNew South Wales 2006Australia

Spectral tunability methods used in optical communications and signal processing leveraging optical,electrical,and acousto-optic effects typically involve spectral truncation that results in energy *** we demonstrate temperature tunable spectral broadening using a nonlinear ultra-silicon-rich nitride device consisting of a 3-mm-long cladding-modulated Bragg grating and a 7-mm-long nonlinear channel *** operating at frequencies close to the grating band edge,in an apodized Bragg grating,we access strong grating-induced dispersion while maintaining low losses and high *** further exploit the redshift in the Bragg grating stopband due to the thermo-optic effect to achieve tunable dispersion,leading to varying degrees of soliton-effect compression and self-phase-modulation-induced spectral *** observe an increase in the bandwidth of the output pulse spectrum from 69 to 106 nm as temperature decreases from 70℃ to 25℃,in good agreement with simulated results using the generalized nonlinear Schrödinger *** demonstrated approach provides a new avenue to achieve on-chip laser spectral tuning without loss in pulse energy.

关键词： tunable tuning nonlinear

Advancing Wound Filling Extraction on 3d Faces:An Auto-Segmentation and Wound Face Regeneration Approach

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第5期139卷 2197-2214页

作者： duong Q.nguyen thinh d.Le Phuong d.nguyen nga t.k.Le H.nguyen-Xuan department of Mathematics and Statistics Quy Nhon UniversityQuy Nhon City55100Viet Nam Applied Research Institute for Science and technology Quy Nhon UniversityQuy Nhon City55100Viet Nam CIRtECH Institute HUTECH UniversityHo Chi Minh City72308Viet Nam

Facial wound segmentation plays a crucial role in preoperative planning and optimizing patient outcomes in various medical *** this paper,we propose an efficient approach for automating 3d facial wound segmentation using a two-stream graph convolutional *** method leverages the Cir3d-FaIR dataset and addresses the challenge of data imbalance through extensive experimentation with different loss *** achieve accurate segmentation,we conducted thorough experiments and selected a high-performing model from the *** selectedmodel demonstrates exceptional segmentation performance for complex 3d facial ***,based on the segmentation model,we propose an improved approach for extracting 3d facial wound fillers and compare it to the results of the previous *** method achieved a remarkable accuracy of 0.9999993% on the test suite,surpassing the performance of the previous *** this result,we use 3d printing technology to illustrate the shape of the wound *** outcomes of this study have significant implications for physicians involved in preoperative planning and intervention *** automating facial wound segmentation and improving the accuracy ofwound-filling extraction,our approach can assist in carefully assessing and optimizing interventions,leading to enhanced patient ***,it contributes to advancing facial reconstruction techniques by utilizing machine learning and 3d bioprinting for printing skin tissue *** source code is available at https://***/SIMOGroup/WoundFilling3d.

关键词： 3d printing technology face reconstruction 3d segmentation 3d printed model

Near resonance vibration isolation on a levered-dual response(LEdAR)Coulomb-damped system by differential preloads/offsets in linear springs

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 1033-1050页

作者： t.I.tOLUWALOJU C.k.tHEIN d.HALIM department of Mechanical Materials and Manufacturing EngineeringUniversity of Nottingham Ningbo ChinaNingbo 315100Zhejiang ProvinceChina Nottingham Ningbo China Beacons of Excellence Research and Innovation Institute University of Nottingham Ningbo ChinaNingbo 315048Zhejiang ProvinceChina

the levered-dual response(LEdAR)Coulomb-damped system attains near resonant vibration isolation by differential preloads/offsets in linear *** takes the advantages of both the preloads/offsets in linear springs and the guiderail friction for realizing different levels of vibration *** isolation capacities are investigated on the strategies with both the horizontal and vertical guiderails,with the horizontal rail only,and without *** compressive preloads generally result in the consumption of most of the initial excitation energy so as to overcome the potential *** isolation onsets at the frequency ratio of 1∓0.095 on the left-hand side(LHS)and the right-hand side(RHS)of the lever are relative to the load plate *** observed near resonant isolation thus makes the LEdAR system a candidate for the isolation of the mechanical systems about resonance while opening a path for simultaneous harvesterisolation functions and passive functions at extreme frequencies.

关键词： lever ratio Coulomb damping preload tension/compression isolation band/depth offset potential

Jetting-based bioprinting:process,dispense physics,and applications

在线全文

学校读者我要写书评

暂无评论

Bio-design and Manufacturing 2024年第5期7卷 771-799页

作者： Wei Long ng Viktor Shkolnikov Singapore Centre for 3d Printing(SC3dP) School of Mechanical and Aerospace EngineeringNanyang Technological University(NTU)Singapore 639798Singapore HP Inc. Palo AltoCA 94304USA

Jetting-based bioprinting facilitates contactless drop-on-demand deposition of subnanoliter droplets at well-defined positions to control the spatial arrangement of cells,growth factors,drugs,and biomaterials in a highly automated layer-by-layer fabrication *** to its immense versatility,jetting-based bioprinting has been used for various applications,including tissue engineering and regenerative medicine,wound healing,and drug development.A lack of in-depth understanding exists in the processes that occur during jetting-based *** review paper will comprehensively discuss the physical considerations for bioinks and printing conditions used in jetting-based *** first present an overview of different jetting-based bioprinting techniques such as inkjet bioprinting,laser-induced forward transfer bioprinting,electrohydrodynamic jet bioprinting,acoustic bioprinting and microvalve ***,we provide an in-depth discussion of various considerations for bioink formulation relating to cell deposition,print chamber design,droplet formation and droplet ***,we highlight recent accomplishments in jetting-based *** present the advantages and challenges of each method,discuss considerations relating to cell viability and protein stability,and conclude by providing insights into future directions of jetting-based bioprinting.

关键词： 3d bioprinting Biofabrication Jetting-based dispense physics Machine learning

Process,Material,and Regulatory Considerations for 3d Printed Medical devices and tissue Constructs

在线全文

学校读者我要写书评

暂无评论

Engineering 2024年第5期36卷 146-166页

作者： Wei Long ng Jia An Chee kai Chua Singapore Centre for 3d Printing(SC3dP) School of Mechanical and Aerospace EngineeringNanyang Technological UniversitySingapore 639798Singapore Centre for Healthcare Education Entrepreneurship and Research@SUTD(CHEERS)Singapore University of Technology and DesignSingapore 487372Singapore

three-dimensional(3d)printing is a highly automated platform that facilitates material deposition in a layer-by-layer approach to fabricate pre-defined 3d complex structures on *** is a highly promising technique for the fabrication of personalized medical devices or even patient-specific tissue *** type of 3d printing technique has its unique advantages and limitations,and the selection of a suitable 3d printing technique is highly dependent on its intended *** this review paper,we present and highlight some of the critical processes(printing parameters,build orientation,build location,and support structures),material(batch-to-batch consistency,recycling,protein adsorption,biocompatibility,and degradation properties),and regulatory considerations(sterility and mechanical properties)for 3d printing of personalized medical *** goal of this review paper is to provide the readers with a good understanding of the various key considerations(process,material,and regulatory)in 3d printing,which are critical for the fabrication of improved patient-specific 3d printed medical devices and tissue constructs.

关键词： 3d printing Bioprinting Biofabrication Medical devices tissue constructs

Chebyshev polynomial-based Ritz method for thermal buckling and free vibration behaviors of metal foam beams

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 891-910页

作者： N.d.ngUYEN t.N.ngUYEN Faculty of Civil Engineering Ho Chi Minh City University of Technology and EducationHo Chi Minh City 71309Viet Nam Faculty of Engineering and technology Kien Giang UniversityChau Thanh 92000Viet Nam

this study presents the Chebyshev polynomials-based Ritz method to examine the thermal buckling and free vibration characteristics of metal foam *** analyses include three models for porosity distribution and two scenarios for thermal *** material properties are assessed under two conditions,i.e.,temperature dependence and temperature *** theoretical framework for the beams is based on the higher-order shear deformation theory,which incorporates shear deformations with higher-order *** governing equations are established from the Lagrange equations,and the beam displacement fields are approximated by the Chebyshev *** simulations are performed to evaluate the effects of thermal load,slenderness,boundary condition(BC),and porosity distribution on the buckling and vibration behaviors of metal foam *** findings highlight the significant influence of temperature-dependent(td)material properties on metal foam beams'buckling and vibration responses.

关键词： Ritz method Chebyshev function buckling vibration metal foam beam higher-order beam theory(HOBt)

Process engineering of demineralisation of moderate to high ash Indian coals through NaOH‑HCl leaching and HF leaching

在线全文

学校读者我要写书评

暂无评论

International Journal of Coal Science & technology 2024年第2期11卷 111-122页

作者： Heena dhawan d.k.Sharma ANRF Ministry of ScienceNew DelhiIndia department of Energy Science and Engineering Indian Institute of Technology DelhiNew Delhi 110016India

Chemical leaching of coals would be required to produce cleaner coals for some special applications where physical benefi-ciation may not be effective *** would also help in recovering Li and rare earth metals besides in the sequestration of CO_(2).About 20 Indian coals having complexly distributed moderate to high ash contents were sequentially treated with various alkali–acid such as NaOH-HCl,HF,HCl,HCl-HF,and NaOH-HCl-HF *** aimed to establish and design the best stepwise sequential process for the highest degree of demineralisation through a chemical leaching *** and process intensification studies were carried *** than 80%demineralisation of Madhaipur and Neemcha coals was observed using the best sequential treatment designed *** repeated stepwise treatment of the alkali and the acid was also studied,which was found to significantly enhance the degree of demineralisation of *** integrated process of alkali–acid leaching followed by solvent extraction(Organo-refining)and vice versa of the treated coal was also studied for producing cleaner coals.

关键词： Alkali–acid leaching demineralisation Integrated process Rare earth elements

detailed seismic zoning of the East kazakhstan region in the Republic of kazakhstan

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Geodesy and Geodynamics 2024年第2期15卷 156-165页

作者： Natalya V.Silacheva N.P.Stepanenko O.k.kurilova A.d.kudabayeva A.t.danabayeva Institute of Seismology Ministry of Emergency SituationsAlmaty 050060Kazakhstan

kazakhstan is currently drafting new construction regulations that comply with the major provisions of the *** regulations are created on the basis of seismic zoning maps of various degrees of detail,developed by our Institute of Seismology using a new methodological approach for *** article is about creating the first normative map of the detailed Seismic Zoning on a probabilistic foundation for the Republic of kazakhstan’s East kazakhstan *** carried out the probabilistic assessment of seismic hazard using a methodology consistent with the main provisions of Eurocode 8and updated compared with that used in developing maps of kazakhstan’s General Seismic Zoning and seismic microzoning of *** most thorough and current data accessible for the area under consideration were combined with contemporary analytical *** have been done to not only the databases being used but also the way seismic sources were shown,including active faults *** a scale of 1:1000000,precise seismic zoning maps of the East kazakhstan region were created for two probabilities of exceedance:10%and 2%in 50 years in terms of peak ground accelerations and macroseismic *** obtained seismic hazard distribution is generally consistent with the General Seismic Zoning of kazakhstan’s previous ***,because active faults were included and a thoroughly revised catalog was used,there are more pronounced zones of increased danger along the fault in the western part of the *** the west of the territory,acceleration values also increased due to a more accurate consideration of seismotectonic *** maps are the basis for developing new state building regulations of the Republic of kazakhstan.

关键词： Probabilistic seismic hazard assessment detailed seismic zoning Peak ground acceleration Microseismical intensity

Effect of Moringa oleifera on semen quality profiles in endangered teressa goat under tropical humid island ecosystem

在线全文

学校读者我要写书评

暂无评论

Asian pacific Journal of Reproduction 2024年第2期13卷 89-96页

作者： P.Perumal Jai Sunder A.k.de A.k.Nahak d.k.Chaurasia t.C.Balamurugan d.Bhattacharya ICAR-Central Island Agricultural Research Institute Port Blair-744105Andaman and Nicobar IslandsIndia OUAt-College of Veterinary Science and Animal Husbandry Bhubaneswar-751003OdishaIndia tANUVAS-Veterinary College and Research Institute Salem-636112Tamil NaduIndia

Objective:to investigate the effect of Moringa oleifera leaf extract on semen quality parameters in teressa goat ***:A total of 25 semen samples from six bucks were selected for the *** of 150×10^(6) were incubated in 0,300,500 and 700μg of leaf extract as groupⅠ,Ⅱ,Ⅲ and Ⅳ,*** stored semen samples were analysed for motility,viability,total sperm abnormalities,plasma membrane,acrosomal and nuclear integrities,seminal plasma intracellular enzymes[aspartate aminotransferase(ASt),alanine aminotransferase(ALt)and lactate dehydrogenase(LdH)]and total antioxidant capacity(tAC)and spermatozoa malondialdehyde(MdA)and cholesterol efflux in comparison with the control group(groupⅠ)for up to 72 ***:Moringa oleifera leaf extract(500μg/150×10^(6) spermatozoa)-treated semen had significantly higher motility,viability,plasma membrane,acrosomal and nuclear integrities,and tAC(Pd had significantly lower total sperm abnormalities,ASt,ALt,LdH,MdA production and cholesterol efflux compared to those in other Moringa oleifera leaf extract treated(300 or 700μg/150×10^(6) spermatozoa)and control groups at different hours of liquid storage(Pty parameters and tAC showed an increasing trend and total sperm abnormalities,MdA production,leakage of intra-cellular enzymes and cholesterol efflux showed a decreasing trend from group Ⅰto group Ⅲand then an opposite trend from group Ⅲ to group Ⅳ at different hours of liquid ***:Moringa oleifera leaf extract 500μg/150×10^(6) spermatozoa can be used for liquid semen preservation in teressa goat at Andaman and Nicobar Islands.

关键词： Moringa oleifera Semen teressa goat Andaman and Nicobar Islands