检索结果-南通市图书馆

Chinese Physics C 2024年第5期48卷 60-71页

作者： d.ananjay singh Arvind Kumar department of Physics Dr.B R Ambedkar National Institute of Technology JalandharJalandhar–144008PunjabIndia

In the present study,we applied Tsallis non-extensive statistics to investigate the thermodynamic properties and phase diagram of quark matter in the Polyakov chiral SU(3)quark mean field *** this model,the properties of the quark matter were modified through the scalar fieldsσ,ζ,δ,χ,vector fieldsω,ρ,ϕ,and Polyakov fieldsΦandΦ¯at finite temperature and chemical ***-extensive effects were introduced through a dimensionless parameter q,and the results were compared to those of the extensive case(q→1).In the non-extensive case,the exponential in the Fermi-dirac(Fd)function was modified to a q-exponential *** influence of the q parameter on the thermodynamic properties,pressure,energy,and entropy density,as well as trace anomaly,was *** speed of sound and specific heat with non-extensive effects were also ***,the effect of non-extensivity on the deconfinement phase transition as well as the chiral phase transition of u,d,and s quarks was *** found that the critical end point(CEP),which defines the point in the(T−μ)phase diagram where the order of the phase transition changes,shifts to a lower value of temperature,TCEP,and a higher value of chemical potential,μCEP,as the non-extensivity is increased,that is,q>1.

关键词： quark matter quark mean field model QCd phase diagram non-extensive statistics

Investigating the Evolution of Amati Parameters with Redshift

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第1期24卷 188-200页

作者： Meghendra singh darshan singh Kanhaiya Lal Pandey dinkar Verma Shashikant Gupta delhi Metro Rail Corporation Limited New Delhi 110001India Gd Goenka University Gurugram 122103India department of Physics Mata Raj Kaur Institute of Engineering and TechnologyRewari 123401India department of Physics School of Advanced SciencesVellore Institute of TechnologyVellore 632014India

Gamma-ray bursts(GRBs) are among the brightest objects in the Universe and, hence, can be observed up to a very high redshift. Properly calibrated empirical correlations between intensity and spectral correlations of GRBs can be used to estimate the cosmological parameters. However, the possibility of the evolution of GRBs with redshift is a long-standing puzzle. In this work, we used 162 long-duration GRBs to determine whether GRBs below and above a certain redshift have different properties. The GRBs are split into two groups, and we fit the Amati relation for each group separately. Our findings demonstrate that estimations of the Amati parameters for the two groups are substantially dissimilar. We perform simulations to investigate whether the selection effects could cause the difference. Our analysis shows that the differences may be either intrinsic or due to systematic errors in the data, and the selection effects are not their true origin. However, in-depth analysis with a new data set comprised of 119 long GRBs shows that intrinsic scatter may partly be responsible for such effects.

关键词： Cosmology gamma rays:general (cosmology:)large-scale structure of universe galaxies:high-redshift

Constructing a biofunctionalized 3d-printed gelatin/sodium alginate/chitosan tri-polymer complex scaffold with improvised biological andmechanical properties for bone-tissue engineering

在线全文

学校读者我要写书评

暂无评论

Bio-design and Manufacturing 2024年第1期7卷 57-73页

作者： Amit Kumar singh Krishna Pramanik Amit Biswas Centre of Excellence in Tissue Engineering Department of Biotechnology and Medical EngineeringNational Institute of TechnologyRourkela 769008India

Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering *** present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue *** experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and *** resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3d)*** studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural *** scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue *** tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of *** enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue *** vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold *** addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3d structures,demonstrating its pote

关键词： Scaffold Biomaterial Sodium alginate Chitosan Gelatin 3d printing Tissue engineering

Effect of organic component(tartrate) addition on cerium nitrate's ability to inhibit corrosion of mild steel in NaCl solution

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第10期42卷 1995-2002页

作者： Minakshi Koundal Chhaya Sharma A.K.singh department of Applied Science and Engineering Indian Institute of Technology RoorkeeSaharanpur Campus department of Pulp and Paper Technology Indian Institute of Technology Roorkee Saharanpur Campus

Cerium tartrate（CeTar）,produced in this study by precipitating cerium nitrate with potassium sodium tartrate（KNaTar）,was examined as a corrosion *** loss tests show inhibition efficiency of 71.7% with Ce（NO3）3and 88.7% with CeTar inhibitor for one-month exposure to mild steel in 7 g/L NaCl *** inhibition efficiency drops to 28.6% with the fo rmer and remains around 8 7% with the latter inhibitor after six months of *** results from electrochemical testing indicate that the inhibition efficiency decreases by adding cerium ***,the cerium tartrate inhibitor demonstrates a nearly constant inhibition efficiency for up to 30 d,i.e.,≈90%.Electrochemical impedance spectroscopy（EIS） performed in these cases shows the following results:（ⅰ） with cerium nitrate,a film of iron and cerium oxide,which on prolonged exposure diminishes,and（ⅱ） with cerium tartrate,the formation of a bimetallic film（Fe-tartrate-Ce） and a mixture of cerium hydroxide and iro n oxide that protects steel for a longer *** inferences are based on the analyses of scanning electron microscopy/energydispersive X-ray analysis（SEM/EdAX）,X-ray diffraction（XRd）,Fourier transform infrared spectroscopy（FTIR）,X-ray photoelectron（XPS）,and Raman spectroscopy results.

关键词： Cerium nitrate Cerium tartrate Corrosion inhibition Inhibitor film characterization Mild steel Rare earths

Nonlinear Coupling of Kinetic Alfvén Waves and Ion Acoustic Waves in the Inner Heliosphere

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第10期24卷 141-158页

作者： Mani K.Chettri Vivek Shrivastav Rupak Mukherjee Nidhi Gaur R.P.Sharma Hemam d.singh department of Physics Sikkim UniversityGangtokSikkimIndia dAV Public School Sector 14GurugramHaryanaIndia Plasma Simulation Laboratory Department of Energy Science and EngineeringIndian Institute of Technology DelhiDelhiIndia

We study the nonlinear coupling of kinetic Alfvén waves with ion acoustic waves applicable to the Earth’s radiation belt and near-Sun streamer belt solar wind using dynamical equations in the form of modified Zakharov *** simulations show the formation of magnetic field filamentary structures associated with density humps and dips which become turbulent at later times,redistributing the energy to higher *** magnetic power spectra exhibit an inertial range Kolmogorov-like spectral index value of-5/3 for k_(⊥)ρ_(i)d by a steeper dissipation range spectra with indices~-3 for the radiation belt case and~-4 for the nearSun streamer belt solar wind case,here k_(⊥)andρ_(i)represent the wavevector component perpendicular to the background magnetic field and the ion thermal gyroradius,*** quasilinear theory in terms of the Fokker-Planck equation in the region of wavenumber turbulent spectra,we find the particle distribution function flattening in the superthermal tail population which is the signature of particle energization and plasma heating.

关键词： Sun:chromosphere Sun:corona Sun:heliosphere

design of computer vision assisted machine learning based controller for the Stewart platform to track spatial objects

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第8期18卷 1195-1208页

作者： dev Kunwar singh CHAUHAN Pandu R.VUNdAVILLI Indian Institute of Technology Bhubaneswar Bhubaneswar 752050India

The present work aims to develop an object tracking controller for the Stewart platform using a computer vision-assisted machine learning-based *** research is divided into two *** first module focuses on the design of a motion controller for the Physik Instrumente(PI)-based Stewart *** contrast,the second module deals with the development of a machine-learning-based spatial object tracking algorithm by collecting information from the Zed 2 stereo vision ***,simple feed-forward neural networks(NN)are used to predict the orientation of the top table of the *** training,the x,y,and z coordinates of the three-dimensional(3d)object,extracted from images,are used as the input to the *** contrast,the orientation information of the platform(that is,rotation about the x,y,and z-axes)is considered as the output from the *** orientation information obtained from the network is fed to the inverse kinematics-based motion controller(module 1)to move the platform while tracking the *** training,the optimised NN is used to track the continuously moving 3d *** experimental results show that the developed NN-based controller has successfully tracked the moving spatial object with reasonably good accuracy.

关键词： Stewart platform feed-forward neural networks motion controller inverse kinematics stereo vision

Effect of random movement and cooperative hunting in the prey-predator system:A dynamical approach

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Biomathematics 2024年第3期17卷 211-240页

作者： Shivam Teekam singh Mukesh Kumar department of Mathematics Graphic Era deemed to be University 566/6 Bell RoadSociety AreaClenent Town DehradunUttarakhand 248002India department of Computer Science and Engineering Graphic Era deemed to be University 566/6 Bell RoadSociety AreaClement Town DehradunUttarakhand 248002India

Self-diffusion prerequisite is obtained as the spreading approach of biological *** hunting is a common behavior in predator populations that promotes predation and the coexistence of the prey-predator *** the other side,the Allee effect among prey may cause the system to become *** this paper,a difusive prey predator system with cooperative hunting and the weak Allee effect in prey populations is *** linear stability and Hopf-bifurcation analysis had been used to examine the system's *** the spatial stability of the system,the conditions for Turing instability have been *** multiple-scale analysis has been used to derive the amplitude equations of the *** stability analysis of these amplitude equations leads to the formation of Turing ***,numerical simulations are used to analyze spatial patterns forming in 1-d and *** studies indicate that the model can generate a complex pattern structure and that self-diffusion has a drastic impacton species distribution.

关键词： Prey predator system hunting cooperation Allee effect Hopf-bifurcation diffusive instability amplitudeequation

MARS and RNAcmap3:The Master database of All Possible RNA Sequences Integrated with RNAcmap for RNA Homology Search

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Genomics, Proteomics & Bioinformatics 2024年第1期22卷 143-150页

作者： Ke Chen Thomas Litfin Jaswinder singh Jian Zhan Yaoqi Zhou Institute of Systems and Physical Biology Shenzhen Bay LaboratoryShenzhen 518055China Peking University Shenzhen Graduate School Shenzhen 518055China University of Science and Technology of China Hefei 230026China Suzhou Institute for Advanced Research University of Science and Technology of ChinaSuzhou 215123China Institute for Glycomics Griffith UniversitySouthportQLD 4222Australia

sequences found in the huge,integrated database of protein sequences(Big Fantastic database).In contrast,the existing nucleotide databases were not consolidated to facilitate wider and deeper homology ***,we built a comprehensive database by incorporating the non-coding RNA(ncRNA)sequences from RNAcentral,the transcriptome assembly and metagenome assembly from metagenomics RAST(MG-RAST),the genomic sequences from Genome Warehouse(GWH),and the genomic sequences from MGnify,in addition to the nucleotide(nt)database and its subsets in National Center of Biotechnology Information(NCBI).The resulting Master database of All possible RNA sequences(MARS)is 20-fold larger than NCBI’s nt database or 60-fold larger than *** new dataset along with a new split-search strategy allows a substantial improvement in homology search over existing state-of-the-art *** also yields more accurate and more sensitive multiple sequence alignments(MSAs)than manually curated MSAs from Rfam for the majority of structured RNAs mapped to *** results indicate that MARS coupled with the fully automatic homology search tool RNAcmap will be useful for improved structural and functional inference of ncRNAs and RNA language models based on *** is accessible at https://***/omix/release/OMIX003037,and RNAcmap3 is accessible at http://***/download/.

关键词： RNA sequence database Homology search Secondary structure MARS RNAcmap3

Acoustical properties of a 3d printed honeycomb structure filled with nanofillers:Experimental analysis and optimization for emerging applications

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

defence Technology（防务技术） 2024年第5期35卷 248-258页

作者： Jeyanthi Subramanian Vinoth kumar Selvaraj Rohan singh Ilangovan S Naresh Kakur Ruban Whenish School of Mechanical Engineering Vellore Institute of TechnologyChennai600127Tamil NaduIndia department of Mechanical Engineering SRM Institute of Science and TechnologyRamapuramChennai600089India department of Chemical Engineering and Materials Science University of Southern CaliforniaLos Angeles90089USA Advanced Materials Research Centre Technology Innovation InstituteAbu Dhabi9639UAE Center for Biomaterials Cellular and Molecular TheranosticsVellore Institute of TechnologyVellore632014Tamil NaduIndia

The novelty of this research lies in the successful fabrication of a 3d-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E *** Creality Ender-3,a 3d printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their *** organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)*** structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3d printed honeycomb structure,numerous samples were systematically developed using central composite design(CCd)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel ***,the results demonstrate that a 3dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.

关键词： 3d printing Honeycomb structure Acoustics Field emission scanning electron microscope Response surface methodology

Graphene-calcium carbonate coating to improve the degradation resistance and mechanical integrity of a biodegradable implant

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 394-404页

作者： Lokesh Choudhary Parama Chakraborty Banerjee R.K.singh Raman derrek E.Lobo Christopher d.Easton Mainak Majumder Frank Witte Jörg F.Löffler department of Mechanical and Aerospace Engineering Monash UniversityClayton CampusMelbourneVIC 3800Australia department of Chemical and Biological Engineering Monash UniversityClayton CampusMelbourneVIC 3800Australia Nanoscale Science and Engineering Laboratory(NSEL) Bldg 37Monash UniversityClayton CampusMelbourneVIC 3800Australia CSIRO Materials Science and Engineering Bayview AvenueClaytonVIC 3168Australia Julius Wolff Institute and Berlin Brandenburg Center for Regenerative Therapies Charité–Universitätsmedizin BerlinAugustenburger Platz 113353 BerlinGermany Laboratory of Metal Physics and Technology Department of MaterialsETH Zurich8093 ZurichSwitzerland

Biodegradable implants are critical for regenerative orthopaedic procedures,but they may suffer from too fast corrosion in human-body *** necessitates the synthesis of a suitable coating that may improve the corrosion resistance of these implants without compromising their mechanical *** this study,an AZ91 magnesium alloy,as a representative for a biodegradable Mg implant material,was modified with a thin reduced graphene oxide(RGO)-calcium carbonate(CaCO_(3))composite *** analytical and in-vitro electrochemical characterization reveals that this coating significantly improves the corrosion resistance and mechanical integrity,and thus has the potential to greatly extend the related application field.

关键词： Graphene coating Biodegradable implant Hydroxyapatite Corrosion Magnesium alloy