检索结果-南通市图书馆

China Ocean Engineering 2024年第2期38卷 233-246页

作者： DING Xin-dong WANG Shu-qing LIU Wen-cheng YE Xiao-han College of Engineering Ocean University of ChinaQingdao 266100China Shandong Provincial Key Laboratory of Ocean Engineering Ocean University of ChinaQingdao 266100China Department of Marine Technology Norwegian University of Science and Technology(NTNU)Trondheim NO-7491Norway

The collapse pressure is a key parameter when RTPs are applied in harsh deep-water *** investigate the collapse of RTPs,numerical simulations and hydrostatic pressure tests are *** the numerical simulations,the eigenvalue analysis and Riks analysis are combined,in which the Hashin failure criterion and fracture energy stiffness degradation model are used to simulate the progressive failure of composites,and the“infinite”boundary conditions are applied to eliminate the boundary *** for the hydrostatic pressure tests,RTP specimens were placed in a hydrostatic chamber after filled with *** has been observed that the cross-section of the middle part collapses when it reaches the maximum *** collapse pressure obtained from the numerical simulations agrees well with that in the ***,the applicability of NASA SP-8007 formula on the collapse pressure prediction was also *** has a relatively greater difference because of the ignorance of the progressive failure of *** the parametric study,it is found that RTPs have much higher first-ply-failure pressure when the winding angles are between 50°and 70°.Besides,the effect of debonding and initial ovality,and the contribution of the liner and coating are also discussed.

关键词： reinforced thermoplastic pipes post-buckling behavior progressive failure of composites debonding initial ovality

Dual modification of LiNi_(0.83)Co_(0.11)Mn_(0.06)O_(2) cathode materials by K^(+) doping and Li_(3)PO_(4) coating for lithium ions batteries

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第7期43卷 3007-3018页

作者： Wei Xiao Jia-Le Wang Zhi-cheng Yi cheng-Jin Liu Chang Miao Yu Xin Shu-qing Nie College of Chemistry and Environmental Engineering Yangtze UniversityJingzhou 434023China

Li_(3)PO_(4)@Li_(0.99)K_(0.01)Ni_(0.83)Co_(0.11)Mn_(O.06)O_(2)(NCM-KP) cathode powders are synthesized via K^(+)doping in calcination processes and H_3PO_4 coating in sol-gel processes.K^(+) precisely enters into the lattice to widen the(003) plane to 0.4746 nm with a lower cationic disordered degree of 1.87%.Moreover,the surface residual lithium salts are treated by H_3PO_4 to generate a uniform Li_(3)PO_(4) coating layer of approximately 11.41 nm,which completely covers on the surface of secondary spherical particles to improve the interfacial *** 25℃,the NCM-KP electrode delivers a discharge specific capacity of 148.9 mAh·g^(-1) with a remarkable capacity retention ratio of 84.1% after 200 cycles at 1.0C and retains a high reversible specific capacity of 154.4 mAh·g^(-1) at *** at 1.0C and 60℃,it can maintain a reversible discharge specific capacity of 114.6 mAh·g^(-1) with 0.21% of capacity decay per cycle after 200 cycles,which is significantly lower than 0.40% for the pristine NCM ***,the charge transfer resistance of 238.89 Ω for the NCM-KP electrode is significantly lower than 947.41 Ω for the pristine NCM one by restricting the interfacial side ***,combining K+doping and Li_(3)PO_(4) coating is an effective strategy to enable the significant improvement of the electrochemical property of high-nickel cathode materials,which may be mainly attributed to the widened diffusion pathway and the formed Li_(3)PO_(4) protective layer,thus promoting Li~+diffusion rate and preventing the erosion of HF.

关键词： High-nickel cathode material Residual lithium K^(+)doping Li_(3)PO_(4)coating Lithium ions battery

Unusual photocarrier and coherent phonon dynamics behaviors of layered PdSe_(2)unveiled by ultrafast spectroscopy of the edge surface

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第8期67卷 143-152页

作者： Tiantian Yun Changfu Huo Jinluo cheng Zhi-Bo Liu Xiao-qing Yan Key Laboratory of Weak-Light Nonlinear Photonics Ministry of EducationSchool of PhysicsNankai UniversityTianjin 300071China Collaborative Innovation Center of Extreme Optics Shanxi UniversityTaiyuan 030006China GPL Photonics Laboratory Key Laboratory of Luminescence Science and TechnologyChinese Academy of Sciences&State Key Laboratory of Luminescence Science and ApplicationsChangchun Institute of OpticsFine Mechanics and PhysicsChinese Academy of SciencesChangchun 130033China

Layered materials exhibit different electronic and phonon properties along in-plane and out-of-plane directions;existing studies focus on their in-plane behaviors,and the influence of such anisotropies on the dynamics of photocarriers and phonons is ***,we fabricate layered PdSe_(2)crystals with flat edge surfaces and compare the time-resolved ultrafast spectroscopies on their basal and edge *** differences in the transient reflection spectroscopies reveal the inconsistent photocarrier and phonon dynamics behaviors on the two surfaces:the slow hot carrier relaxation process is accelerated and the thermoelasticity-induced longitudinal coherent acoustic phonon oscillation completely vanishes on the edge surface,as compared with the basal *** analysis reveals that the inconsistent hot carrier dynamics originate from the anisotropic properties of low-energy phonons in PdSe_(2),and the absence of phonon oscillation on the edge surface results from the wavevector-limited sensitivity of acoustic B_(1u)***,polarization-dependent spectroscopies indicate the diverse optical anisotropies beyond the in-plane of PdSe_(2).This work provides a new method to explore unique physical properties and modulate the optical anisotropy of layered materials.

关键词： PdSe_(2) ultrafast spectroscopy edge surface carrier dynamics coherent phonon oscillation anisotropy

Identification and validation of novel prognostic fatty acid metabolic gene signatures in colon adenocarcinoma through systematic approaches

在线全文

学校读者我要写书评

暂无评论

Oncology Research 2024年第2期32卷 297-308页

作者： HENG ZHANG WENJING cheng HAIBO ZHAO WEIDONG CHEN QIUJIE ZHANG qing-qing YU Department of Laboratory Shandong Daizhuang HospitalJining272051China Jining No.1 People’s Hospital Shandong First Medical UniversityJining272000China

Colorectal cancer(CRC)belongs to the class of significantly malignant tumors found in ***,dysregulated fatty acid metabolism(FAM)has been a topic of attention due to its modulation in cancer,specifically ***,the regulatory FAM pathways in CRC require comprehensive ***:The clinical and gene expression data of 175 fatty acid metabolic genes(FAMGs)linked with colon adenocarcinoma(COAD)and normal cornerstone genes were gathered through The Cancer Genome Atlas(TCGA)-COAD corroborating with the Molecular Signature Database v7.2(MSigDB).Initially,crucial prognostic genes were selected by uni-and multi-variate Cox proportional regression analyses;then,depending upon these identified signature genes and clinical variables,a nomogram was ***,to assess tumor immune characteristics,concomitant evaluation of tumor immune evasion/risk scoring were ***:A 8-gene signature,including ACBD4,ACOX1,CD36,CPT2,ELOVL3,ELOVL6,ENO3,and SUCLG2,was generated,and depending upon this,CRC patients were categorized within high-risk(H-R)and low-risk(L-R)***,risk and age-based nomograms indicated moderate discrimination and good *** data confirmed that the 8-gene model efficiently predicted CRC patients’***,according to the conjoint analysis of tumor immune evasion and the risk scorings,the H-R cohort had an immunosuppressive tumor microenvironment,which caused a substandard ***:This investigation established a FAMGs-based prognostic model with substantially high predictive value,providing the possibility for improved individualized treatment for CRC individuals.

关键词： Fatty acid metabolism Colorectal cancer Gene signatures Machine learning

Super P and MoO_(2)/MoS_(2)co-doped gradient nanofiber membrane as multi-functional separator for lithium–sulfur batteries

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4263-4273页

作者： Xin Liang Dong-qing Zhao Qian-Qian Huang Sheng Liang Li-Li Wang Lei Hu Ling-Li Liu Kun-Hong Hu chong-Hai Deng Sheng cheng Er-Tao Zhu Hua-Xia Deng School of Energy Materials and Chemical Engineering LIB Technology Center of Anhui ProvinceHefei UniversityHefei 230601China Instrumental Analysis Centre Hefei University of TechnologyHefei 230009China Hefei Youngy Energy Materials Co. Ltd.Hefei 230000China Department of Modern Mechanics University of Science and Technology of ChinaHefei 230026China

Lithium-sulfur battery is one of the most promising battery systems for industrialization due to its high theoretical specific capacity and high energy ***,the"shuttle effect"has restrained the advancement of lithium-sulfur *** this work,a gradient-structured nanofiber membrane with pure gelatin on one side and Super P-MoO_(2)/MoS_(2)-gelatin on the other side was created using a multi-step electrostatic spinning technique,which was applied for multi-functional separator for lithium-sulfur *** pure gelatin layer facing the anode side primarily homogenizes the lithium flux,whereas the Super P-MoO_(2)/MoS_(2)-gelatin layer facing the cathode side primarily adsorbs polysulfides by physical and chemical adsorption and enhancing polysulfide conversion *** findings demonstrate that even after 150 cycles at 0.2C,the lithium-sulfur battery can still sustain a discharge-specific capacity of 572.3 mAh·g^(-1).When used with Li||Li symmetric batteries,it has a cycle life of more than 1200 *** commercialization of lithium-sulfur batteries is given a fresh idea by this straightforward preparation technique.

关键词： MoO_(2)/MoS_(2) Nanofiber Membrane Li-S battery

Pressure transient characteristics of non-uniform conductivity fractured wells in viscoelasticity polymer flooding based on oil-water two-phase flow

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 343-351页

作者： Yang Wang Jia Zhang Shi-Long Yang Ze-Xuan Xu Shi-qing cheng National Key Laboratory of Petroleum Resources and Engineering China University of Petroleum(Beijing)Beijing102249China

Polymer flooding in fractured wells has been extensively applied in oilfields to enhance oil *** contrast to water,polymer solution exhibits non-Newtonian and nonlinear behavior such as effects of shear thinning and shear thickening,polymer convection,diffusion,adsorption retention,inaccessible pore volume and reduced effective ***,the flux density and fracture conductivity along the hydraulic fracture are generally non-uniform due to the effects of pressure distribution,formation damage,and proppant *** this paper,we present an oil-water two-phase flow model that captures these complex non-Newtonian and nonlinear behavior,and non-uniform fracture characteristics in fractured polymer *** hydraulic fracture is firstly divided into two parts:high-conductivity fracture near the wellbore and low-conductivity fracture in the far-wellbore section.A hybrid grid system,including perpendicular bisection(PEBI)and Cartesian grid,is applied to discrete the partial differential flow equations,and the local grid refinement method is applied in the near-wellbore region to accurately calculate the pressure distribution and shear rate of polymer *** combination of polymer behavior characterizations and numerical flow simulations are applied,resulting in the calculation for the distribution of water saturation,polymer concentration and reservoir *** with the polymer flooding well with uniform fracture conductivity,this non-uniform fracture conductivity model exhibits the larger pressure difference,and the shorter bilinear flow period due to the decrease of fracture flow ability in the far-wellbore *** field case of the fall-off test demonstrates that the proposed method characterizes fracture characteristics more accurately,and yields fracture half-lengths that better match engineering reality,enabling a quantitative segmented characterization of the near-wellbore section with high fracture conductivity and th

关键词： Polymer flooding Non-Newtonian fluid Non-uniform fracture conductivity Two-phase flow Pressure transient analysis

Effect of ceramic work rolls on surface roughness of rolled SUS304 ultra-thin strips

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第7期31卷 1704-1718页

作者： Peng-cheng Li Tao Wang Chen-chen Zhao Qi Liu qing-xue Huang College of Mechanical and Vehicle Engineering Taiyuan University of TechnologyTaiyuan 030024ShanxiChina Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment of Ministry of Education Taiyuan University of TechnologyTaiyuan 030024ShanxiChina National Key Laboratory of Metal Forming Technology and Heavy Equipment Taiyuan University of TechnologyTaiyuan 030024ShanxiChina

Surface morphology and roughness are important parameters of surface quality of cold-rolled ultra-thin strip *** order to study the effect of Si_(3)N_(4) ceramic work rolls on the surface roughness of SUS304 ultra-thin strip,ABAQUS finite element model calculation,3D laser profilometry,and other methods were adopted based on the physical characteristics of Si_(3)N_(4) ceramic roll and 9Cr2MoV steel roll,like anti-flattening performance and oil *** surface morphology and roughness of SUS304 ultra-thin strip rolled by different material work rolls under oil lubrication conditions were *** results showed that under the rolling force of 10 kN,the maximum flattening amount of Si_(3)N_(4) ceramic roll was reduced by 35.14%compared to that of 9Cr2MoV steel *** reduction rate of SUS304 ultra-thin strip rolled by ceramic roll was 34.19%,while that rolled by steel roll was only 22%;Si_(3)N_(4) ceramic roll can further increase the number of alternating convex peaks and concave valleys in the rolled thin strip,reduce the profile steepness,reduce surface roughness,and enhance the planarization effect of surface micro-convex bodies,with improving surface quality and surface ***,the mechanism of Si_(3)N_(4) ceramic roll significantly improving the surface roughness of rolled SUS304 ultra-thin strip was proposed.

关键词： Ceramic work roll-Steel roll SUS304 ultra-thin strip Reduction Surface roughness

Research on a TOPSIS energy efficiency evaluation system for crude oil gathering and transportation systems based on a GA-BP neural network

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 621-640页

作者： Xue-Qiang Zhang qing-Lin cheng Wei Sun Yi Zhao Zhi-Min Li Key Lab of Ministry of Education for Enhancing the Oil and Gas Recovery Ratio Northeast Petroleum UniversityDaqing163318HeilongjiangChina China Petroleum Pipeline Material and Equipment Co. LtdLangfang065000HebeiChina Research Institute of Petroleum Engineering and Technology Sinopec Northwest Oilfield CompanyUrumqi830011XinjiangChina

As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex *** is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency *** this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is *** with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation *** comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are *** the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy *** entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their ***,the weak links in energy utilization are identified,and energy conservation and consumption reduction are *** above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.

关键词： Crude oil gathering and transportation system GA-BP neural network Energy efficiency evaluation TOPSIS evaluation method Energy saving and consumption reduction

Study of the Lift Force Induced by An Interceptor on A High-Speed Mono-Hull:The Affecting Factors and Estimation Formula

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第4期38卷 557-571页

作者： DENG Rui HU Yu-xiao HUANG Si-chong SONG Zhi-jie WANG Shi-gang WU Tie-cheng School of Ocean Engineering and Technology Sun Yat-sen Universityand Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)Zhuhai 519082China

To find a better way to estimate the lift force induced by an interceptor on a high-speed mono-hull ship,a series of high-speed mono-hull ship models are designed and investigated under different *** lift forces are obtained by numerical calculations and validated by a model test in a towing *** factors that influence the force are the interceptor height,velocity,draft,and deadrise *** relationship between each factor and the induced lift force is investigated and *** found that the induced lift mainly depends on the interceptor height and advancing velocity,and is proportional to the square of the interceptor height and *** results also showed that the effects of the draft and deadrise angle are relatively less important,and the relationship between the induced lift and these two factors is generally *** on the results,a formula including the combined effect of all factors used to estimate the lift force induced by the interceptor is developed based on systematic *** proposed formula could be used to estimate the lift force induced by interceptors,especially under high-speed condition.

关键词： high-speed mono-hull ship interceptor lift force formula lift force towing tank test computational fluid dynamics

Effect of slag composition on kinetic behavior of deep deoxidation of 5 wt.% Si high-silicon austenitic stainless steel

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 1873-1885页

作者： Guan-xiong Dou Han-jie Guo Jing Guo Xue-cheng Peng qing-yun Chen School of Metallurgical and Ecological Engineering University of Science and Technology Beijing(USTB)Beijing 100083China Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials Beijing 100083China

Based on a thermodynamic study of 5 wt.%Si high-silicon austenitic stainless steel(SS-5Si)smelting using CaF_(2)-CaO-Al_(2)0_(3)-Mg-Si0_(2) slag to obtain a low oxygen content of less than 10×10^(-4) wt.%,a kinetic mass transfer model for deep deoxidation was established through laboratory studies,and the effects of slag components and temperature on deoxidation during the slag-steel reaction process of sS-5Si were systematically *** experimental data verified the accuracy of the model *** results showed that the final oxygen content in the steel at 1873 K was mainly controlled by the oxygen content derived from the activity of SiO_(2) regulated by the[Si]-[O]equilibrium reaction in the slag system;in particular,when the slag basicity R(R=w(CaO)/w(SiO2),where w(CaO)and w(SiO_(2))are the contents of CaO and SiO_(2) in the slag,respectively)is 3,the Al2O3 content in the slag needs to be less than 2.7%.The mass transfer rate equation for the kinetics of the deoxidation reaction revealed that the mass transfer of oxygen in the liquid metal is the rate-controlling step under different slag conditions at 1873 K,and the oxygen transfer coefficient ko.m increases with increasing the slag basicity from 4.0×10^(-6)m s^(-1)(R=1)to 4.3×10^(-5) m s^(-1)(R=3).ko.m values at R=2 and R=3 are almost the same,indicating that high slag basicity has little *** integral of the mass transfer rate equation for the deoxidation reaction of SS-5Si under different slag conditions is *** total oxygen content of the molten steel decreases with increasing basicity from an initial content of 22×10^(-4) to 3.2×10^(-4) wt.%(R=3),consistent with the change in ko.m with slag *** R=2,the slag-steel reaction takes 15 min to reach equilibrium(w[O]=5.5×10^(-4) wt.%),whereas at R=3,the slag-steel reaction takes 30 min to reach equilibrium(w[0]=3.2×10^(-4) wt.%).Considering the depth of deoxidation and reaction time of SS-5Si smelting,it is recommended the slag b

关键词： Slag-steel reaction Kinetics Rate-controlling step Deep deoxidation Transfer coefficient